- 09 Mar, 2007 40 commits
-
-
Tejun Heo authored
Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tejun Heo authored
Some LLDs were missing scsi device PM callbacks while having host/port suspend support. Add missing ones. Signed-off-by:
-
Pavel Roskin authored
In the bcm43xx interrupt handler, sanity checks are wrongly done before the verification that the interrupt is for the bcm43xx. Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Darren Salt authored
mmc: Power quirk for ENE controllers Support for these devices was broken for 2.6.18-rc1 and later by commit 146ad66e, which added voltage level support. This restores the previous behaviour for these devices by ensuring that when the voltage is changed, only one write to set the voltage is performed. It may be that both writes are needed if the voltage is being changed between two non-zero values or that it's safe to ensure that only one write is done if the hardware only supports one voltage; I don't know whether either is the case nor can I test since I have only the one SD reader (1524:0550), and it supports just the one voltage. Signed-off-by:
Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Signed-off-by:
-
Jeff Dike authored
A previous cleanup misused need_poll, which had a fairly broken interface. It implemented a growable array, changing the used elements count itself, but leaving it up to the caller to fill in the actual elements, including the entire array if the array had to be reallocated. This worked because the previous users were switching between two such structures, and the elements were copied from the inactive array to the active array after making sure the active array had enough room. maybe_sigio_broken was made to use need_poll, but it was operating on a single array, so when the buffer was reallocated, the previous contents were lost. This patch makes need_poll implement more sane semantics. It merely assures that the array is of the proper size and that the contents are preserved. It is up to the caller to adjust the used elements count and to ensure that the proper elements are resent. This manifested itself as a hang in 2.6.20 as the uninitialized buffer convinced UML that one of its own file descriptors didn't support SIGIO and needed to be watched by poll in a separate thread. The result was an interrupt flood as control traffic over this descriptor sparked interrupts, which resulted in more control traffic, ad nauseum. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Hugh Dickins authored
Fix insecure default behaviour reported by Tigran Aivazian: if an ext2 or ext3 or ext4 filesystem is tuned to mount with "acl", but mounted by a kernel built without ACL support, then umask was ignored when creating inodes - though root or user has umask 022, touch creates files as 0666, and mkdir creates directories as 0777. This appears to have worked right until 2.6.11, when a fix to the default mode on symlinks (always 0777) assumed VFS applies umask: which it does, unless the mount is marked for ACLs; but ext[234] set MS_POSIXACL in s_flags according to s_mount_opt set according to def_mount_opts. We could revert to the 2.6.10 ext[234]_init_acl (adding an S_ISLNK test); but other filesystems only set MS_POSIXACL when ACLs are configured. We could fix this at another level; but it seems most robust to avoid setting the s_mount_opt flag in the first place (at the expense of more ifdefs). Likewise don't set the XATTR_USER flag when built without XATTR support. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Acked-by:
Andreas Gruenbacher <agruen@suse.de> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Signed-off-by:
-
Tejun Heo authored
sata_sil used to trigger HSM error if IRQ occurs during polling command. This didn't matter because polling wasn't used in sata_sil. However, as of 2.6.20, all IDENTIFYs are performed by polling and device detection sometimes fails due to spurious IRQ. This patch makes sata_sil ignore and clear spurious IRQ while executing commands by polling. This fixes bug#7996 and IMHO should also be included in -stable. Signed-off-by:
-
Stefan Seyfried authored
Fix the Oops occuring when SNAPSHOT_PMOPS or SNAPSHOT_S2RAM ioctl is called on a system without pm_ops defined (eg. a non-ACPI kernel on x86 PC). Signed-off-by:
Stefan Seyfried <seife@suse.de> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Thomas Gleixner authored
Problem description at: http://bugzilla.kernel.org/show_bug.cgi?id=8048 Commit b18ec803 [PATCH] sched: improve migration accuracy optimized the scheduler time calculations, but broke posix-cpu-timers. The problem is that the p->last_ran value is not updated after a context switch. So a subsequent call to current_sched_time() calculates with a stale p->last_ran value, i.e. accounts the full time, which the task was scheduled away. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Michael Krufky authored
This updates the cx88-blackbird driver to be able to use the new cx23416 firmware image released by Hauppauge Computer Works, while retaining compatibility with the older firmware images. cx2341x firmware can be downloaded at: http://dl.ivtvdriver.org/ivtv/firmware/ (cherry picked from commit af70dbd3) Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
Hans Verkuil authored
Due to changes in the i2c handling in 2.6.20 this cx25840 bug surfaced, causing the firmware load to fail for the ivtv driver. The correct sequence is to first attach the i2c client, then use the client's device to load the firmware. (cherry picked from commit d55c7aec) Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Acked-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Michael Krufky authored
dvb-pll normally opens the i2c gate before attempting to communicate with the pll, but the code for this device is not using dvb-pll. This should be cleaned up in the future, but for now, just open the i2c gate at the appropriate place in order to fix this driver bug. (cherry picked from commit 2fe22dcd) Signed-off-by:
-
Jin-Bong lee authored
Without this patch, the device will not be detected after firmware download on big endian systems. (cherry picked from commit 1d1370a4) Signed-off-by:
Jin-Bong lee <jinbong.lee@samsung.com> Signed-off-by:
-
Mike Isely authored
Rework the cx23416 firmware loader so that it longer requires the firmware size to be a multiple of 8KB. Until recently all cx2341x firmware images were exactly 256KB, but newer firmware is larger than that and also appears to have arbitrary size. We still must check against a multiple of 4 bytes (because the cx23416 itself uses a 32 bit word size). This fix is already in the upstream driver source and has proven itself there; this is a backport for the 2.6.20.y kernel series. (backported from commit 90060d32) Signed-off-by:
-
Mike Isely authored
This introduces some extra cx23416 commands when streaming is started. The addition of these commands fix random sporadic video corruption that can take place when the video stream is temporarily disrupted through loss of signal (e.g. changing the channel in the RF tuner). This fix is already in the upstream driver source and has proven itself there; this is a backport for the 2.6.20.y kernel series. (backported from commit 6fe7d2c4) Signed-off-by:
-
Marcel Siegert authored
Arjan van de Ven <arjan@infradead.org> reported an illegal re-usage of the fileoperations struct if more than one dvb device (e.g. frontend) is present. This patch fixes this issue. It allocates a new fileoperations struct each time a device is registered and copies the default template fileops. (backported from commit b6190102) Signed-off-by:
Marcel Siegert <mws@linuxtv.org> Signed-off-by:
-
NeilBrown authored
There are two errors that can lead to recovery problems with raid10 when used in 'far' more (not the default). Due to a '>' instead of '>=' the wrong block is located which would result in garbage being written to some random location, quite possible outside the range of the device, causing the newly reconstructed device to fail. The device size calculation had some rounding errors (it didn't round when it should) and so recovery would go a few blocks too far which would again cause a write to a random block address and probably a device error. The code for working with device sizes was fairly confused and spread out, so this has been tided up a bit. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Stefano Brivio authored
BCM4309 devices aren't working properly as A PHYs aren't supported yet, but we probe 802.11a cores anyway. This fixes it, while still allowing for A PHY code to be developed in the future. Signed-off-by:
Stefano Brivio <stefano.brivio@polimi.it> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Jan Beulich authored
After updating several machines to 2.6.20, I can't boot anymore the single one of them that supports the NX bit and is configured as a 32-bit system. My understanding is that the VDSO changes in 2.6.20-rc7 were not fully cooked, in that with that config option enabled VDSO_SYM(x) now equals x, meaning that an address in the fixmap area is now being passed to apps via AT_SYSINFO. However, the page is mapped with PAGE_READONLY rather than PAGE_READONLY_EXEC. I'm not certain whether having app code go through the fixmap area is intended, but in case it is here is the simple patch that makes things work again. Cc: Theodore Tso <tytso@mit.edu> Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
x86: Don't require the vDSO for handling a.out signals and in other strange binfmts. vDSO is not necessarily mapped there. This fixes signals in a.out programs Signed-off-by:
-
Andi Kleen authored
gcc 5.0 will likely not have the constraint problem Signed-off-by:
-
Stephen Hemminger authored
The code in transmit timeout incorrectly assumed that netif_tx_lock was not set. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Stephen Hemminger authored
Don't mark pause frames as errors. This problem caused transmitter not to pause and would effectively take out a gigabit switch because the it can't handle overrun. Signed-off-by:
-
David Miller authored
[XFRM]: Fix OOPSes in xfrm_audit_log(). Make sure that this function is called correctly, and add BUG() checking to ensure the arguments are sane. Based upon a patch by Joy Latten. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ilpo Järvinen authored
TCP may advertize up to 16-bits window in SYN packets (no window scaling allowed). At the same time, TCP may have rcv_wnd (32-bits) that does not fit to 16-bits without window scaling resulting in pseudo garbage into advertized window from the low-order bits of rcv_wnd. This can happen at least when mss <= (1<<wscale) (see tcp_select_initial_window). This patch fixes the handling of SYN advertized windows (compile tested only). In worst case (which is unlikely to occur though), the receiver advertized window could be just couple of bytes. I'm not sure that such situation would be handled very well at all by the receiver!? Fortunately, the situation normalizes after the first non-SYN ACK is received because it has the correct, scaled window. Alternatively, tcp_select_initial_window could be changed to prevent too large rcv_wnd in the first place. [ tcp_make_synack() has the same bug, and I've added a fix for that to this patch -DaveM ] Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Jiri Bohac authored
[IPX]: Fix NULL pointer dereference on ipx unload Fixes a null pointer dereference when unloading the ipx module. On initialization of the ipx module, registering certain packet types can fail. When this happens, unloading the module later dereferences NULL pointers. This patch fixes that. Please apply. Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Signed-off-by:
-
Herbert Xu authored
[NETFILTER]: Clear GSO bits for TCP reset packet The TCP reset packet is copied from the original. This includes all the GSO bits which do not apply to the new packet. So we should clear those bits. Spotted by Patrick McHardy. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David Miller authored
[ATM]: atmarp.h needs to always include linux/types.h To provide the __be* types, even for userspace includes. Reported by Andrew Walrond. Signed-off-by:
-
Alan Stern authored
This patch (as863) fixes a problem encountered sometimes when resuming a port on a UHCI controller. The hardware may turn off the Resume-Detect bit before turning off the Suspend bit, leading usbcore to think that the port is still suspended and the resume has failed. The patch makes uhci_finish_suspend() wait until both bits are safely off. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
NeilBrown authored
When the last thread of nfsd exits, it shuts down all related sockets. It currently uses svc_close_socket to do this, but that only is immediately effective if the socket is not SK_BUSY. If the socket is busy - i.e. if a request has arrived that has not yet been processes - svc_close_socket is not effective and the shutdown process spins. So create a new svc_force_close_socket which removes the SK_BUSY flag is set and then calls svc_close_socket. Also change some open-codes loops in svc_destroy to use list_for_each_entry_safe. Signed-off-by:
-
NeilBrown authored
process-pools have real benefits for NUMA, but on SMP machines they only work if network interface interrupts go to all CPUs (via round-robin or multiple nics). This is not always the case, so disable the pools in this case until a better solution is developped. Signed-off-by:
-
Alan Stern authored
This patch (as850b) disables remote wakeup (and everything else!) on all EHCI ports when the shutdown() method is called. If remote wakeup is left active then some systems will reboot instead of powering off. This fixes Bugzilla #7828. Signed-off-by:
-
YOSHIFUJI Hideaki authored
Tetsuo Handa <handat@pm.nttdata.co.jp> told me that connect(2) with TCPv6 socket almost always took a few minutes to return when we did not have any ports available in the range of net.ipv4.ip_local_port_range. The reason was that we used incorrect seed for calculating index of hash when we check established sockets in __inet6_check_established(). Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
David Woodhouse authored
[MTD] Fix regression in RedBoot partition scanning This fixes a regression introduced by the attempt to handle RedBoot FIS tables which are smaller than an eraseblock, in commit 0b47d654 It moves the recalculation of the number of slots in the table to the correct place, and improves the heuristic for when we think we need to byte-swap what we read from the flash. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Cc: Rod Whitby <rod@whitby.id.au> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
There is no prompt for STACKTRACE, so it is enabled only when 'select'ed. FAULT_INJECTION depends on it, while LOCKDEP selects it. So FAULT_INJECTION becomes visible in Kconfig only when LOCKDEP is enabled. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Julien BLACHE authored
The USB vendor and product IDs are not byteswapped appropriately, and thus come out in the wrong endianness when fetched through the evdev using ioctl() on big endian platforms. Signed-off-by:
Julien BLACHE <jb@jblache.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Michael Hanselmann authored
Commit 40b20c25 by Len Brown introduced a null pointer dereference in the appledisplay driver. This patch fixes it. Signed-off-by:
Michael Hanselmann <linux-kernel@hansmi.ch> Signed-off-by:
-
Stefan Richter authored
Since my commit 8252bbb1 in 2.6.20-rc1, host devices have a dummy driver attached. Alas the driver was not registered before use if ieee1394 was loaded with disable_nodemgr=1. This resulted in non-functional FireWire drivers or kernel lockup. http://bugzilla.kernel.org/show_bug.cgi?id=7942Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
David Moore authored
This together with the phys_to_virt fix in lib/swiotlb.c::swiotlb_sync_sg fixes video1394 DMA on machines with DMA bounce buffers, especially Intel x86-64 machines with > 3GB RAM. Signed-off-by:
David Moore <dcm@acm.org> Tested-by:
Nicolas Turro <Nicolas.Turro@inrialpes.fr> Signed-off-by:
-
Rojhalat Ibrahim authored
We get the following compiler error: CC arch/ppc/kernel/ppc_ksyms.o arch/ppc/kernel/ppc_ksyms.c:275: error: '__mtdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:275: warning: type defaults to 'int' in declaration of '__mtdcr' arch/ppc/kernel/ppc_ksyms.c:276: error: '__mfdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:276: warning: type defaults to 'int' in declaration of '__mfdcr' make[1]: *** [arch/ppc/kernel/ppc_ksyms.o] Error 1 This is due to the EXPORT_SYMBOL for __mtdcr/__mfdcr not having the proper CONFIG protection Signed-off-by:
Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
