- 14 Sep, 2020 15 commits
-
-
Krzysztof Kozlowski authored
Remove whitespace at the end of line. Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200904145312.10960-6-krzk@kernel.orgSigned-off-by:
Rob Herring <robh@kernel.org>
-
Krzysztof Kozlowski authored
Add common properties appearing in DTSes (cooling-cells, assigned-clocks and others) to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpu@38000000: '#cooling-cells', 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' do not match any of the regexes: 'pinctrl-[0-9]+' Reviewed-by: -
Krzysztof Kozlowski authored
Add common properties appearing in DTSes (assigned-clocks and others) to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: mipi-dsi@30a00000: 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' do not match any of the regexes: '^panel@[0-9]+$', 'pinctrl-[0-9]+' Signed-off-by: -
Krzysztof Kozlowski authored
The i.MX General Power Controller v2 is also an interrupt controller so document additional properties to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc@303a0000: '#interrupt-cells', 'interrupt-controller' do not match any of the regexes: 'pinctrl-[0-9]+' Reviewed-by: -
Mauro Carvalho Chehab authored
Convert Hisilicon Kirin 960 USB3 PHY bindings to DT schema format using json-schema. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/edfeafe6b5a60a84d08095fb380f32e61af46d40.1599206213.git.mchehab+huawei@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The Mailbox on i.MX 8QXP (fsl,imx8qxp-mu) can also be compatible with fsl,imx8-mu-scu (for fast IPC) so adjust the compatibles to fix dtbs_check warnings like: arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml: mailbox@5d1f0000: compatible: ['fsl,imx8-mu-scu', 'fsl,imx8qxp-mu', 'fsl,imx6sx-mu'] is not valid under any of the given schemas (Possible causes of the failure): arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml: mailbox@5d1f0000: compatible: ['fsl,imx8-mu-scu', 'fsl,imx8qxp-mu', 'fsl,imx6sx-mu'] is too long Signed-off-by: -
Krzysztof Kozlowski authored
Update the address of Maxime Ripard as one in @free-electrons.com does not work. Cc: Maxime Ripard <mripard@kernel.org> Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Add common properties appearing in DTSes (opp-table) to fix dtbs_check warnings like: arch/arm/boot/dts/exynos4210-i9100.dt.yaml: gpu@13000000: 'opp-table' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: -
Krzysztof Kozlowski authored
Add common properties appearing in DTSes (opp-table) to fix dtbs_check warnings like: arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: gpu@14ac0000: 'opp-table' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: -
Krzysztof Kozlowski authored
Add common properties appearing in DTSes (controller-data, wakeup-source) to partially fix dtbs_check warnings like: arch/arm/boot/dts/exynos5250-snow.dt.yaml: embedded-controller@1e: 'keyboard-controller', 'wakeup-source' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/exynos5800-peach-pi.dt.yaml: cros-ec@0: 'controller-data', 'i2c-tunnel', 'keyboard-controller' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: -
Krzysztof Kozlowski authored
The Exynos Multi Core Timer driver requires two clocks. This was never documented in the binding. Add it to fix dtschema warnings like: arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: timer@101c0000: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: -
Krzysztof Kozlowski authored
Add common properties appearing in DTSes (assigned-clock-parents, assigned-clocks) to fix dtbs_check warnings like: arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: system-controller@105c0000: 'assigned-clock-parents', 'assigned-clocks' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: -
Krzysztof Kozlowski authored
Correct a typo in the compatible - missing trailing 's'. Reviewed-by:
Kamil Konieczny <k.konieczny@samsung.com> Acked-by:
-
Krzysztof Kozlowski authored
The samsung,s6e63j0x03 does not have enable GPIO, so do not require it. This fixes dtbs_check warning: arch/arm/boot/dts/exynos3250-rinato.dt.yaml: panel@0: 'enable-gpios' is a required property Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Add Samsung 11-pin USB-C connector into standard dtschema bindings file. Signed-off-by:
-
- 09 Sep, 2020 1 commit
-
-
Suman Anna authored
Convert the current OMAP hwspinlock binding from text format to YAML format/DT schema, and delete the legacy text binding file. The new YAML binding conversion is a slightly updated version compared to the original. The legacy "ti,hwmods" property is now obsolete and is dropped altogether, and the K3 example is updated to showcase the actual dts node usage. Signed-off-by:
Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20200828041447.5900-1-s-anna@ti.comSigned-off-by:
-
- 08 Sep, 2020 3 commits
-
-
Mauro Carvalho Chehab authored
Convert the SPMI bus documentation to JSON/yaml. Signed-off-by:
-
Christian Lamparter authored
Meraki was founded in 2006. The start-up quickly rose to prominence by being based in part on the MIT Roofnet Project. In December 2012, Cisco Systems, Inc. bought Meraki. The "Meraki" branding is still around to this day. Web site of the company: https://meraki.cisco.com/Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Link: https://lore.kernel.org/r/20200822154045.16036-1-chunkeey@gmail.comSigned-off-by:
-
Andre Przywara authored
This converts the DT binding documentation for the ARM SP-804 timer IP over to json-schema. Most properties are just carried over, the clocks property requirement (either one or three clocks) is now formalised and enforced. As the former binding didn't specify clock-names, and there is no common name used by the existing DTs, I refrained from adding them in detail (just allowing the property). The requirement for the APB clock is enforced by the primecell binding already. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200828142018.43298-2-andre.przywara@arm.com [robh: drop primecell.yaml] Signed-off-by:
-
- 03 Sep, 2020 3 commits
-
-
Rob Herring authored
The driver and metag arch were removed in 2018. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200826184851.3431531-3-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The driver was removed in 2016 in commit fb954c48 ("phy: stih41x-usb: Remove usb phy driver and dt binding documentation.") and somehow the DT binding got dropped despite the subject. Cc: Peter Griffin <peter.griffin@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20200826184851.3431531-2-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The binding was added in 2013 and has had no driver since 2015. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Link: https://lore.kernel.org/r/20200826184851.3431531-1-robh@kernel.orgSigned-off-by:
-
- 19 Aug, 2020 4 commits
-
-
Rob Herring authored
As the number of binding schemas has grown, the time to run dt_binding_check has gotten pretty slow. A large part of this is due to the slow startup time of Python (a well documented problem). There's not currently any benefit to running dt-doc-validate one file at a time, so let's switch it to run a single rule. Doing this means we loose the make parallelism, but we can use xargs instead. This speeds up the validation time from several minutes to <10 sec. Since the validation is a single step with no output, we move running it as part of the processed-schema-examples.json target. We also need to reorder the extra-y entries so the validation is run first rather than after all the examples are extracted. Signed-off-by: -
Andrei Ziureaev authored
Change the format of processed-schema* from yaml to json to speed up validation. With json output, using xargs and appending the output won't work since json has explicit list begin and end characters. Instead, we pass the schema files as a list in a temp file. The parsing time for the processed schema goes down from ~2sec to 70ms. Also, 'make dtbs_check' becomes 33% faster. Some error messages are affected by this change. For example, "True was expected" becomes "... is not of type 'boolean'". The order of messages is also changed. Signed-off-by:
Andrei Ziureaev <andrei.ziureaev@arm.com> Signed-off-by:
-
Rob Herring authored
dtschema release 2020.8.1 gained several additions to help performance. dt-doc-validate can now take a list of files and directories, and dt-mk-schema can store the processed schema in JSON which is much faster to parse than YAML. Utilizing both of these changes results in a 3-4x speed improvement in running dt_binding_check. There's also additional meta-schema checks which binding schemas should be checked against. Signed-off-by: -
Geert Uytterhoeven authored
None of the help texts use capitalization, except the one for the -T option. Drop the capitalization for consistency. Split the single long line that doesn't fit in 80 characters. Reviewed-by:
Frank Rowand <frowand.list@gmail.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
- 18 Aug, 2020 7 commits
-
-
Anson Huang authored
Convert the NXP lpuart binding to DT schema format using json-schema. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1597721685-9280-5-git-send-email-Anson.Huang@nxp.comSigned-off-by:
-
Anson Huang authored
Convert the MXS auart binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX uart binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Update the i.MX23 clock example to align with MXS AUART binding doc to avoid below build error: Documentation/devicetree/bindings/clock/imx23-clock.example.dt.yaml: serial@8006c000: clocks: [[4294967295, 32]] is too short Documentation/devicetree/bindings/clock/imx23-clock.example.dt.yaml: serial@8006c000: 'dmas' is a required property Documentation/devicetree/bindings/clock/imx23-clock.example.dt.yaml: serial@8006c000: 'dma-names' is a required property Signed-off-by: -
Anson Huang authored
Update the i.MX28 clock example to align with MXS AUART binding doc to avoid below build error: Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml: serial@8006a000: clocks: [[4294967295, 45]] is too short Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml: serial@8006a000: compatible: Additional items are not allowed ('fsl,imx23-auart' was unexpected) Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml: serial@8006a000: compatible: ['fsl,imx28-auart', 'fsl,imx23-auart'] is too long Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml: serial@8006a000: 'dmas' is a required property Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml: serial@8006a000: 'dma-names' is a required property Signed-off-by: -
Thierry Reding authored
Iterate over child devices in reverse when unpopulating a platform device to make this step symmetrical with the population step. This fixes an issue in the Tegra DRM driver where upon module unload the DPAUX controller tries to unregister an I2C controller but will end up waiting indefinitely because one of the SOR devices is keeping a reference to it. Since the SOR devices are instantiated after the DPAUX devices, they would only be removed (and hence release their reference to the I2C controller) after the DPAUX devices have been removed. While destroying the child devices in reverse order helps in this situation, it isn't fully safe to do so either. An even better way would be for the child devices to be reordered to match the probe order, which would work irrespective of the instantiation order. However, reordering by probe order would be fairly complicated and doesn't fix any known issues, so we'll go with the simpler fix for now. Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200806153650.3883530-1-thierry.reding@gmail.comSigned-off-by:
-
Anson Huang authored
Convert the vf610 gpio binding to DT schema format using json-schema. Signed-off-by:
-
- 17 Aug, 2020 7 commits
-
-
Anson Huang authored
Convert the i.MX sata binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the snvs lpgpr binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX DDR perf binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX rng binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX7ULP SIM binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX7ULP PM binding to DT schema format using json-schema. Signed-off-by:
-
Anson Huang authored
Convert the i.MX sahara binding to DT schema format using json-schema. Signed-off-by:
-
