- 25 Aug, 2020 5 commits
-
-
Pierre-Louis Bossart authored
When using dynamic debug, the console is swamped with verbose position pointer logs, which really don't add much information. Move then to vdbg to keep traces usable and allow for easier end-user support. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200824200912.46852-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Ranjani Sridharan authored
Virtual widgets are added to topology to be compatible with legacy machine drivers. Reduce the log level for messages printed when such widgets are ignored by the SOF driver. Reviewed-by:
-
Ranjani Sridharan authored
Looks like it was left over from the previous implementation of DMIC PDM token parsing. It is not used anymore. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Several fields in struct snd_sof_dev are used as boolean flags, use the "bool" type for them. Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Remove two cases of redundant variable initialisation. Reviewed-by:
-
- 24 Aug, 2020 18 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.10" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This series updates the tables used to select SoundWire configurations for CometLake and TigerLake, and adds support for SDCA (SoundWire Device Class for Audio) codecs in the common machine driver. These codec drivers are still being tested on early silicon/boards and will be contributed at a later time. For TigerLake Chromebooks a new DMI quirk is added, as well as a means to override the topology names. A pm_runtime fix is also provided to deal with playback/capture dependencies with an amplifier w/ feedback. I also included a minor codec correction for the TGL amplifier. Bard Liao (5): ASoC: Intel: modify SoundWire version id in acpi match table ASoC: Intel: sof_sdw: check SoundWire version when matching codec ASoC: Intel: sof_sdw: rename id as part_id ASoC: Intel: sof_sdw: add rt711 rt1316 rt714 SDCA codec support. ASoC: Intel: sof_sdw: clean-up inclusion of header files Pierre-Louis Bossart (5): ASoC: Intel: soc-acpi: cnl: add support for rt5682 on SoundWire link2 ASoC: Intel: sof-soundwire: add support for rt5682 on link2 ASoC: Intel: soc-acpi: mirror CML and TGL configurations ASoC: Intel: soc-acpi: add support for SDCA boards ASoC: codecs: max98373-sdw: add missing test on resume Rander Wang (2): ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case ASoC: Intel: sof_sdw: Add support for product Ripto Sathyanarayana Nujella (2): ASoC: Intel: sof_rt5682: override quirk data for tgl_max98373_rt5682 ASoC: SOF: Add topology filename override based on dmi data match sound/soc/codecs/max98373-sdw.c | 3 + sound/soc/intel/boards/Kconfig | 3 + sound/soc/intel/boards/Makefile | 7 +- sound/soc/intel/boards/sof_maxim_common.c | 7 +- sound/soc/intel/boards/sof_rt5682.c | 13 ++ sound/soc/intel/boards/sof_sdw.c | 98 +++++++--- sound/soc/intel/boards/sof_sdw_common.h | 22 ++- sound/soc/intel/boards/sof_sdw_dmic.c | 1 + sound/soc/intel/boards/sof_sdw_max98373.c | 2 + sound/soc/intel/boards/sof_sdw_rt1308.c | 2 + sound/soc/intel/boards/sof_sdw_rt1316.c | 113 ++++++++++++ sound/soc/intel/boards/sof_sdw_rt5682.c | 2 + sound/soc/intel/boards/sof_sdw_rt700.c | 2 + sound/soc/intel/boards/sof_sdw_rt711.c | 2 + sound/soc/intel/boards/sof_sdw_rt711_sdca.c | 174 ++++++++++++++++++ sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 42 +++++ .../intel/common/soc-acpi-intel-cml-match.c | 79 +++++++- .../intel/common/soc-acpi-intel-cnl-match.c | 33 +++- .../intel/common/soc-acpi-intel-icl-match.c | 10 +- .../intel/common/soc-acpi-intel-tgl-match.c | 165 ++++++++++++++++- sound/soc/sof/intel/hda.c | 8 +- sound/soc/sof/sof-pci-dev.c | 24 +++ 22 files changed, 764 insertions(+), 48 deletions(-) create mode 100644 sound/soc/intel/boards/sof_sdw_rt1316.c create mode 100644 sound/soc/intel/boards/sof_sdw_rt711_sdca.c create mode 100644 sound/soc/intel/boards/sof_sdw_rt715_sdca.c base-commit: fcea8b02 -- 2.25.1
-
Shengjiu Wang authored
Regmap initialization may return -EPROBE_DEFER for clock may not be ready, so check -EPROBE_DEFER error type before start another Regmap initialization. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1598255887-1391-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
"AVDD" is for analog power supply, "DVDD" is for digital power supply, they can improve the power management. As the regulator is enabled in pm runtime resume, which is behind the component driver probe, so accessing registers in component driver probe will fail. Fix this issue by enabling regcache_cache_only after pm_runtime_enable. Signed-off-by:
-
Shengjiu Wang authored
AVDD-supply is for Analog power supply DVDD-supply is for Digital power supply Signed-off-by:
-
Bard Liao authored
"struct snd_soc_dapm_widget" and "struct snd_kcontrol_new" are used in most of these .c files. Adding the header files to prevent from depending on <sound/soc.h> Reported-by:
Rander Wang <rander.wang@linux.intel.com> Signed-off-by:
-
Bard Liao authored
Add rt711, rt1316, and rt714 SDCA codecs support in sof_sdw machine driver. Reviewed-by:
-
Sathyanarayana Nujella authored
Add topology filename override based on system DMI data matching, typically to account for a different hardware layout. In ACPI based systems, the tplg_filename is pre-defined in an ACPI machine table. When a DMI quirk is detected, the sof_pdata->tplg_filename is not set with the hard-coded ACPI value, and instead is set with the DMI-specific filename. Reviewed-by:
Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by:
-
Sathyanarayana Nujella authored
A Chrome System based on tgl_max98373_rt5682 has different SSP interface configurations. Using DMI data of this variant DUT, override quirk data. Reviewed-by:
Mac Chiang <mac.chiang@intel.com> Signed-off-by:
-
Rander Wang authored
Ripto is another product based on TGL with the same audio hardware configuration as Volteer. Reviewed-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Bard Liao authored
The "id" field in sof_sdw_codec_info struct is actually the "part id". Rename to prevent confusions. Reviewed-by:
-
Bard Liao authored
Some codecs with the same part id but different SoundWire versions have different configurations. So we have to separate them in codec_info_list[]. Reviewed-by:
-
Pierre-Louis Bossart authored
All existing SoundWire codecs follow the same pattern on resume, except for this codec which doesn't test if the hardware is initialized. Reviewed-by:
-
Rander Wang authored
When the playback & capture streams are stopped simultaneously, the SOF PCI device will remain pm_runtime active. The root-cause is a race condition with two threads reaching the trigger function at the same time. They see another stream is active so the dapm pin is not disabled, so the codec remains active as well as the parent PCI device. For max98373, the capture stream provides feedback when playback is working and it is unused when playback is stopped. So the dapm pin should be set only when playback is active. Reviewed-by:
-
Pierre-Louis Bossart authored
The description and board layout is similar to previous ones for CometLake and TigerLake, except for a bump to SoundWire 1.2 and updates to part numbers to reflect the SDCA (SoundWire Device Class for Audio) hardware support. Note that one of the RT1316 amplifiers uses a non-zero UniqueID which is not required and will be ignored. Reviewed-by:
Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
Some TGL devices use the same audio hardware as on CML platforms, with RT711 on link0, RT1308 on link1 and optionally link2, and RT715 on link 3. To clarify configurations, the rt1308 configurations are split between single amp on link1 and dual amps on link1. The case with two amps on different links is already identified with the group1 attribute. Reviewed-by:
-
Pierre-Louis Bossart authored
The UpExtreme board provides support for SoundWire link2 in 2 of the 3 advanced modes. Let's use it w/ rt5682. Reviewed-by:
-
Pierre-Louis Bossart authored
Add one of the configurations for rt5682 w/ the Up Extreme Advanced Audio mode using the SoundWire link2. Reviewed-by:
-
Bard Liao authored
The SoundWire version id of the existing RT1308, RT711, and RT715 codecs should be 2 (index for SoundWire 1.1), it was mistakenly set as 1 which pointed to the wrong version (SoundWire 1.0). This off-by-one error had no functional impact so far since the version number was not used, however in future patches this version will be required. Reviewed-by:
-
- 21 Aug, 2020 5 commits
-
-
Adam Thomson authored
Previous improvements around handling device and codec level probe functionality added the possibility of the voltage level being undefined for the scenario where the IO voltage retrieved from the regulator supply was below 1.2V, whereas previously the code defaulted to the 2.5V to 3.6V range in that case. This commit restores the default value to avoid this happening. Fixes: aa5b18d1 ("ASoC: da7219: Move soft reset handling to codec level probe") Reported-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200821142259.C2ECE3FB96@swsrvapps-01.diasemi.comSigned-off-by:
-
Bard Liao authored
We may allocate some resources in sof_sdw_codec_info .init function. Adding a corresponding .exit function can help to release these resources. Signed-off-by:
-
Matthias Schiffer authored
The TLV320AIC32x4 is commonly used on TQ-Systems starterkit mainboards for i.MX-based SoMs (i.MX6Q/DL, i.MX6UL, i.MX7) and LS1021A. Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Acked-by:
-
Matthias Schiffer authored
The TLV320AIC32x4 is commonly used on TQ-Systems starterkit mainboards for i.MX-based SoMs (i.MX6Q/DL, i.MX6UL, i.MX7) and LS1021A. Signed-off-by:
-
Pierre-Louis Bossart authored
Select SoundWire capabilities on newer Intel platforms, starting with CannonLake/CoffeeLake/CometLake. As done for HDaudio, the SoundWire link is an opt-in capability. We explicitly test for ACPI to avoid warnings on unmet dependencies on the SoundWire side. Signed-off-by:
-
- 20 Aug, 2020 5 commits
-
-
Mark Brown authored
Add mediatek codec (MT6359) driver MT6359 support playback and capture feature. On downlink path, it includes three DACs for handset, headset, and lineout path. On unlink path, it includeds three ADCs for main mic, second mic, 3rd mic, and headset mic. By scenario, select *_MUX widget to create damp path. And by select mic_type_mux to choose DMIC/AMIC/.... For example, select these MUX widget to create headset path (1) DAC In Mux --> "Normal Path" (2) HP Mux --> "Audio Playback" v6 changes: 1. Remove the compatible string in mt6359codec because MFD should be registering the platform device. v5 changes: 1. Don't need to unregister the component whic is already relegated to devm. 2. patchwork link: https://patchwork.kernel.org/cover/11716387/ https://patchwork.kernel.org/patch/11717757/ https://patchwork.kernel.org/patch/11716491/ v4 changes: 1. Add a remove() function to undo regulator_enable(). 2. Removed unnecessary logs. 3. patchwork link: https://patchwork.kernel.org/cover/11715553/ https://patchwork.kernel.org/patch/11716015/ https://patchwork.kernel.org/patch/11715557/ v3 changes: 1. patchwork link: https://patchwork.kernel.org/cover/11714291/ https://patchwork.kernel.org/patch/11714295/ https://patchwork.kernel.org/patch/11714339/ v2 changes: 1. patchwork link: https://patchwork.kernel.org/cover/11706935/ https://patchwork.kernel.org/patch/11708865/ https://patchwork.kernel.org/patch/11706937/ v1 changes: 1.lkml link: https://lkml.org/lkml/2020/3/5/1257 Jiaxin Yu (2): ASoC: mediatek: mt6359: add codec driver dt-bindings: mediatek: mt6359: add codec document .../devicetree/bindings/sound/mt6359.yaml | 61 + sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/mt6359.c | 2753 +++++++++++++++++ sound/soc/codecs/mt6359.h | 2640 ++++++++++++++++ 5 files changed, 5464 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mt6359.yaml create mode 100644 sound/soc/codecs/mt6359.c create mode 100644 sound/soc/codecs/mt6359.h -- 2.18.0
-
Colin Ian King authored
Currently drvdata->clks is not being checked for an allocation failure, leading to potential null pointer dereferencing. Fix this by adding a check and returning -ENOMEM if an error occurred. Fixes: 1220f6a7 ("ASoC: qcom: Add common array to initialize soc based core clocks") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Rohit kumar <rohitkr@codeaurora.org> Addresses-Coverity: ("Dereference null return value") Link: https://lore.kernel.org/r/20200819160103.164893-1-colin.king@canonical.comSigned-off-by:
-
Pierre-Louis Bossart authored
Make sure the SoundWire driver can be loaded Signed-off-by:
-
Jiaxin Yu authored
This patch adds MediaTek MT6359 codec document. Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1597913493-10747-3-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
Jiaxin Yu authored
Add the mt6359 codec driver. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/1597913493-10747-2-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
- 19 Aug, 2020 7 commits
-
-
Mark Brown authored
ASoC: Convert Samsung drivers to platform drivers
-
Samuel Holland authored
Due to a mistake made while reordering patches, commit 90cac932 ("ASoC: sun8i-codec: Fix DAPM to match the hardware topology") added the sun8i_codec_component_probe function without referencing it from the component definition. Add the reference so the probe function gets called as expected. Fixes: 90cac932 ("ASoC: sun8i-codec: Fix DAPM to match the hardware topology") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20200819034038.46418-1-samuel@sholland.orgSigned-off-by:
-
Arnd Bergmann authored
The constant requires indirectly including a machine header file, but it's not actually used any more since commit 87b132bc ("ASoC: samsung: s3c24{xx,12}-i2s: port to use generic dmaengine API"), so remove it completely. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
-
Arnd Bergmann authored
Avoid machine specific headers by using a gpio lookup table combined with a platform_driver for this board. Signed-off-by:
-
Arnd Bergmann authored
Avoid machine specific headers by using a gpio lookup table combined with a platform_driver for this board. Signed-off-by:
-
Arnd Bergmann authored
Avoid machine specific headers by using a gpio lookup table combined with a platform_driver for this board. Signed-off-by:
-
Anson Huang authored
Convert the NXP SPDIF binding to DT schema format using json-schema. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1597712771-32433-1-git-send-email-Anson.Huang@nxp.comSigned-off-by:
-
