- 29 Aug, 2017 37 commits
-
-
Alexander Aring authored
This patch adds the forces IFE lfb type according to IEEE registered ethertypes. See http://standards-oui.ieee.org/ethertype/eth.txt for more information. Since there exists the IFE subsystem it can be used there. This patch also use the correct word "ForCES" instead of "FoRCES" which is a spelling error inside the IEEE ethertype specification. Signed-off-by:
Alexander Aring <aring@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Explain that the patch queue in patchwork should not be touched by patch submitters. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4 misc patches This patchset contains misc patches from the team to the mlx4 Core and Eth drivers. Patch 1 by Eran replaces large static allocations by dynamic ones. Patch 2 by Leon makes an explicit conversion and solves a smatch warning. In patch 3 I fix a misplaced brackets of the sizeof operation. Patch 4 by Moshe adds the ability to inform the FW regarding user mac updates. Series generated against net-next commit: 901c5d2f ARM: dts: rk3228-evb: Fix the compiling error ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Moshe Shemesh authored
Adding support for updating the FW on new port mac, when port mac change is requested by the user. This info is required by the FW as OEM management tools require this info directly from the NIC FW. Check device capability bit to verify the FW supports user mac. If the FW does support it, use set_port command to notify the FW on the new mac. The feature is relevant only to PF port mac. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
When changing the sizeof style usage in the patch cited below, one brackets misplacement was introduced. Here we fix it. Fixes: 31975e27 ("mlx4: sizeof style usage") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Leon Romanovsky authored
The "lg" variable is declared as int so in all places where this variable is used as a shift operand, the output will be int too. This produces the following smatch warning: drivers/net/ethernet/mellanox/mlx4/fw.c:1532 mlx4_map_cmd() warn: should '1 << lg' be a 64 bit type? Simple declaration of "1" to be "1ULL" will fix the issue. Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eran Ben Elisha authored
In order to avoid temporary large structs on the stack, allocate them dynamically. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Tal Alon <talal@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
A few useful tracepoints to trace bridge forwarding database updates. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== Endian fixes for SYSTEMPORT/SF2/MDIO While trying an ARM BE kernel for kinks, the 3 drivers below started not working and the reasons why became pretty obvious because the register space remains LE (hardwired), except for Broadcom MIPS where it follows the CPU's native endian (let's call that a feature). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The driver currently uses __raw_{read,write}l which works for all platforms supported: Broadcom MIPS LE/BE (native endian), ARM LE (native endian) but not ARM BE (registers are still LE). Switch to using the proper accessors for all platforms and explain why Broadcom MIPS BE is special here, in doing so, we introduce a couple of helper functions to abstract these differences. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
RSB_SWAP0 needs to match the host CPU endian, and it needs to be set for LE and clear for BE. RSB_SWAP1 must always be cleared for SYSTEMPORT Lite. With these settings, we have the Receive Status Block always match the host endian and we do not need to perform any conversion. Since there is not necessarily a CONFIG_CPU_LITTLE_ENDIAN option defined, we test for !CONFIG_CPU_BIG_ENDIAN which is guaranteed to be set. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The Starfigther 2 driver currently uses __raw_{read,write}l which means native I/O endian. This works correctly for an ARM LE kernel (default) but fails miserably on an ARM BE (BE8) kernel where registers are kept little endian, so replace uses with {read,write}l_relaxed here which is what we want because this is all performance sensitive code. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The SYSTEMPORT driver currently uses __raw_{read,write}l which means native I/O endian. This works correctly for an ARM LE kernel (default) but fails miserably on an ARM BE (BE8) kernel where registers are kept little endian, so replace uses with {read,write}l_relaxed here which is what we want because this is all performance sensitive code. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.14 rsi driver is getting a lot of new features lately, but as usual active development happening on iwlwifi as well as other drivers. I pulled wireless-drivers to fix multiple conflicts in iwlwifi and to make it easier further development. Major changes: ath10k * initial UBS bus support (no full support yet) * add tdls support for 10.4 firmware ath9k * add Dell Wireless 1802 wil6210 * support FW RSSI reporting rsi * support legacy power save, U-APSD, rf-kill and AP mode * RTS threshold configuration brcmfmac * support CYW4373 SDIO/USB chipset iwlwifi * some more code moved to a new directory * add new PCI ID for 7265D ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
clk_div_table are not supposed to change at runtime. meson8b_dwmac structure is working with const clk_div_table. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== XDP redirect tracepoints I feel this is as far as I can take the tracepoint infrastructure to assist XDP monitoring. Tracepoints comes with a base overhead of 25 nanosec for an attached bpf_prog, and 48 nanosec for using a full perf record. This is problematic for the XDP use-case, but it is very convenient to use the existing perf infrastructure. From a performance perspective, the real solution would be to attach another bpf_prog (that understand xdp_buff), but I'm not sure we want to introduce yet another bpf attach API for this. One thing left is to standardize the possible err return codes, to a limited set, to allow easier (and faster) mapping into a bpf map. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
This tool xdp_monitor demonstrate how to use the different xdp_redirect tracepoints xdp_redirect{,_map}{,_err} from a BPF program. The default mode is to only monitor the error counters, to avoid affecting the per packet performance. Tracepoints comes with a base overhead of 25 nanosec for an attached bpf_prog, and 48 nanosec for using a full perf record (with non-matching filter). Thus, default loading the --stats mode could affect the maximum performance. This version of the tool is very simple and count all types of errors as one. It will be natural to extend this later with the different types of errors that can occur, which should help users quickly identify common mistakes. Because the TP_STRUCT was kept in sync all the tracepoints loads the same BPF code. It would also be natural to extend the map version to demonstrate how the map information could be used. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
For supporting XDP_REDIRECT, a device driver must (obviously) implement the "TX" function ndo_xdp_xmit(). An additional requirement is you cannot TX out a device, unless it also have a xdp bpf program attached. This dependency is caused by the driver code need to setup XDP resources before it can ndo_xdp_xmit. Update bpf samples xdp_redirect and xdp_redirect_map to automatically attach a dummy XDP program to the configured ifindex_out device. Use the XDP flag XDP_FLAGS_UPDATE_IF_NOEXIST on the dummy load, to avoid overriding an existing XDP prog on the device. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Creating as specific xdp_redirect_map variant of the xdp tracepoints allow users to write simpler/faster BPF progs that get attached to these tracepoints. Goal is to still keep the tracepoints in xdp_redirect and xdp_redirect_map similar enough, that a tool can read the top part of the TP_STRUCT and produce similar monitor statistics. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
There is a need to separate the xdp_redirect tracepoint into two tracepoints, for separating the error case from the normal forward case. Due to the extreme speeds XDP is operating at, loading a tracepoint have a measurable impact. Single core XDP REDIRECT (ethtool tuned rx-usecs 25) can do 13.7 Mpps forwarding, but loading a simple bpf_prog at the tracepoint (with a return 0) reduce perf to 10.2 Mpps (CPU E5-1650 v4 @ 3.60GHz, driver: ixgbe) The overhead of loading a bpf-based tracepoint can be calculated to cost 25 nanosec ((1/13782002-1/10267937)*10^9 = -24.83 ns). Using perf record on the tracepoint event, with a non-matching --filter expression, the overhead is much larger. Performance drops to 8.3 Mpps, cost 48 nanosec ((1/13782002-1/8312497)*10^9 = -47.74)) Having a separate tracepoint for err cases, which should be less frequent, allow running a continuous monitor for errors while not affecting the redirect forward performance (this have also been verified by measurements). Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Given previous patch expose the map_id, it seems natural to also report the bpf prog id. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
To make sense of the map index, the tracepoint user also need to know that map we are talking about. Supply the map pointer but only expose the map->id. The 'to_index' is renamed 'to_ifindex'. In the xdp_redirect_map case, this is the result of the devmap lookup. The map lookup key is exposed as map_index, which is needed to troubleshoot in case the lookup failed. The 'to_ifindex' is placed after 'err' to keep TP_STRUCT as common as possible. This also keeps the TP_STRUCT similar enough, that userspace can write a monitor program, that doesn't need to care about whether bpf_redirect or bpf_redirect_map were used. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
Supplying the action argument XDP_REDIRECT to the tracepoint xdp_redirect is redundant as it is only called in-case this action was specified. Remove the argument, but keep "act" member of the tracepoint struct and populate it with XDP_REDIRECT. This makes it easier to write a common bpf_prog processing events. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Miscellany Here are a number of patches that make some changes/fixes and add a couple of extensions to AF_RXRPC for kernel services to use. The changes and fixes are: (1) Use time64_t rather than u32 outside of protocol or UAPI-representative structures. (2) Use the correct time stamp when loading a key from an XDR-encoded Kerberos 5 key. (3) Fix IPv6 support. (4) Fix some places where the error code is being incorrectly made positive before returning. (5) Remove some white space. And the extensions: (6) Add an end-of-Tx phase notification, thereby allowing kAFS to transition the state on its own call record at the correct point, rather than having to do it in advance and risk non-completion of the call in the wrong state. (7) Allow a kernel client call to be retried if it fails on a network error, thereby making it possible for kAFS to iterate over a number of IP addresses without having to reload the Tx queue and re-encrypt data each time. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Westphal says: ==================== addrlabel: don't use rtnl locking addrlabel doesn't appear to require rtnl lock as the addrlabel table uses a spinlock to serialize add/delete operations. Also, entries are reference counted so it should be safe to call the rtnl ops without the rtnl mutex. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
There appears to be no need to use rtnl, addrlabel entries are refcounted and add/delete is serialized by the addrlabel table spinlock. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Greg Kroah-Hartman authored
Now that the IRDA code has moved under drivers/staging/irda/, update the MAINTAINERS file with the new location. Reported-by:
Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
When bnxt VF-reps are not compiled in (CONFIG_BNXT_SRIOV is off) bnxt_tc.c needs a dummy definition of the routine bnxt_vf_rep_get_fid(). Reported-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: 2ae7408f ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by:
Sathya Perla <sathya.perla@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Howells authored
Allow a client call that failed on network error to be retried, provided that the Tx queue still holds DATA packet 1. This allows an operation to be submitted to another server or another address for the same server without having to repackage and re-encrypt the data so far processed. Two new functions are provided: (1) rxrpc_kernel_check_call() - This is used to find out the completion state of a call to guess whether it can be retried and whether it should be retried. (2) rxrpc_kernel_retry_call() - Disconnect the call from its current connection, reset the state and submit it as a new client call to a new address. The new address need not match the previous address. A call may be retried even if all the data hasn't been loaded into it yet; a partially constructed will be retained at the same point it was at when an error condition was detected. msg_data_left() can be used to find out how much data was packaged before the error occurred. Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
Add a callback to rxrpc_kernel_send_data() so that a kernel service can get a notification that the AF_RXRPC call has transitioned out the Tx phase and is now waiting for a reply or a final ACK. This is called from AF_RXRPC with the call state lock held so the notification is guaranteed to come before any reply is passed back. Further, modify the AFS filesystem to make use of this so that we don't have to change the afs_call state before sending the last bit of data. Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
Remove indentation from some blank lines. Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
call->error is stored as 0 or a negative error code. Don't negate this value (ie. make it positive) before returning it from a kernel function (though it should still be negated before passing to userspace through a control message). Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
Fix IPv6 support in AF_RXRPC in the following ways: (1) When extracting the address from a received IPv4 packet, if the local transport socket is open for IPv6 then fill out the sockaddr_rxrpc struct for an IPv4-mapped-to-IPv6 AF_INET6 transport address instead of an AF_INET one. (2) When sending CHALLENGE or RESPONSE packets, the transport length needs to be set from the sockaddr_rxrpc::transport_len field rather than sizeof() on the IPv4 transport address. (3) When processing an IPv4 ICMP packet received by an IPv6 socket, set up the address correctly before searching for the affected peer. Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
When an XDR-encoded Kerberos 5 ticket is added as an rxrpc-type key, the expiry time should be drawn from the k5 part of the token union (which was what was filled in), rather than the kad part of the union. Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David Howells <dhowells@redhat.com>
-
Baolin Wang authored
Since the 'expiry' variable of 'struct key_preparsed_payload' has been changed to 'time64_t' type, which is year 2038 safe on 32bits system. In net/rxrpc subsystem, we need convert 'u32' type to 'time64_t' type when copying ticket expires time to 'prep->expiry', then this patch introduces two helper functions to help convert 'u32' to 'time64_t' type. This patch also uses ktime_get_real_seconds() to get current time instead of get_seconds() which is not year 2038 safe on 32bits system. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
David Howells <dhowells@redhat.com>
-
Vitaly Kuznetsov authored
We probably don't want to enable code supporting particular hardware by default e.g. when someone does 'make defconfig'. Other ethernet modules don't do it. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 28 Aug, 2017 3 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Updates. Various changes including updated firmware interface, improved TX ring allocation scheme, improved out-of-memory logic in NAPI loop, reduced default rings on multi-port devices, new PCI IDs. Of particular note, CPU affinity hints from Vasundhara Volam. TC Flower eswitch support from Sathya Perla. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
This patch adds code to implement TC_CLSFLOWER_STATS TC-cmd and the required FW code to query the stats from the HW. Signed-off-by:
Sathya Perla <sathya.perla@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
This patch adds the hwrm_cfa_flow_alloc/free() routines that are needed to issue the FW cmds needed for TC flower offload. Signed-off-by:
Sathya Perla <sathya.perla@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-