- delete redundant error messages
 - convert various code to bch2_trans_run
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

the error message here dated from when backpointers could be stored in
alloc keys; now, we should always print the full key.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Using drop_locks_do() ensures that every unlock() is paired with a
relock(), with proper error checking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It's possible to see a -BCH_ERR_ENOSPC_disk_reservation here, and that's
fine.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

 - getline() output includes a newline, without stripping that we were
   just looping

 - Make the prompt clearer
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

More work to avoid allocating memory with btree locks held.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add two new helpers for allocating memory with btree locks held: The
idea is to first try the allocation with GFP_NOWAIT|__GFP_NOWARN, then
if that fails - unlock, retry with GFP_KERNEL, and then call
trans_relock().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The promote path had a BUG_ON() for unknown error type, which we're now
seeing: change it to a WARN_ON() - because we're curious what this is -
and otherwise handle it in the normal error path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

GFP_NOFS doesn't ever make sense. If we're allocatingc memory it should
be GFP_NOWAIT if btree locks are held, GFP_KERNEL otherwise.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When allocating memory, gfp flags should generally be

 - GFP_NOWAIT|__GFP_NOWARN if btree locks are held
 - GFP_NOFS if in the IO path or otherwise holding resources needed for
   IO submission
 - GFP_KERNEL otherwise
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a new helper for the common pattern of:
 - trans_unlock()
 - do something
 - trans_relock()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

GFP_NOIO dates from the bcache days, when we operated under the block
layer. Now, GFP_NOFS is more appropriate, so switch all GFP_NOIO uses to
GFP_NOFS.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Fix a bug where bch2_btree_node_get() might call bch2_trans_unlock() (in
fill) without calling bch2_trans_relock(); this is a bug when it's done
in the core btree code.

Also, twea bch2_btree_node_mem_alloc() to drop btree locks before doing
a blocking memory allocation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We've been using __GFP_NOFAIL for allocating struct bch_folio, our
private per-folio state.

However, that struct is variable size - it holds state for each sector
in the folio, and folios can be quite large now, which means it's
possible for bch_folio to be larger than PAGE_SIZE now.

__GFP_NOFAIL allocations are undesirable in normal circumstances, but
particularly so at >= PAGE_SIZE, and warnings are emitted for that.

So, this patch adds proper error paths and eliminates most uses of
__GFP_NOFAIL. Also, do some more cleanup of gfp flags w.r.t. btree node
locks: we can use GFP_KERNEL, but only if we're not holding btree locks,
and if we are holding btree locks we should be using GFP_NOWAIT.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When partially overwriting an extent in an older snapshot, the existing
extent has to be split.

If the existing extent was overwritten in a different (sibling)
snapshot, we have to ensure that the split won't be visible in the
sibling snapshot.

data_update.c already has code for this,
bch2_insert_snapshot_writeouts() - we just need to move it into
btree_update_leaf.c and change bch2_trans_update_extent() to use it as
well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

As with previous conversions, replace -ENOENT uses with more informative
private error codes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_btree_trans_to_text() is used on btree_trans objects that are owned
by different threads - when printing out deadlock cycles - so we need a
safe version of trans_for_each_path(), else we race with seeing a
btree_path that was just allocated and not fully initialized:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_fs_quota_read() could see an inode that's been deleted
(KEY_TYPE_inode_generation) - bch2_fs_quota_read_inode() needs to check
for that instead of erroring.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

fail counters need to be events, not numbers of sectors - or the
calculations the tests use for determining if we've had too many
slowpath events don't work.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We've been seeing difficult to debug "missing indirect extent" bugs,
that fsck doesn't seem to find.

One possibility is that there was a missing indirect extent, but then a
new indirect extent was created at the location of the previous indirect
extent.

This patch eliminates that possibility by always creating new indirect
extents right after the last one, at the end of the reflink btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

abs() is in math.h
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add some more tests that test conventional and weighted mean
simultaneously, and with a table of values that represents events that
we'll be using this to look for so we can verify-by-eyeball that the
output looks sane.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When running in userspace, we currently don't have a real percpu
implementation available - at least in bcachefs-tools, which is where
this code is currently used in userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This switches to a newer cmpxchg variant which updates @old for us on
failure, simplifying the cmpxchg loops a bit and supposedly generating
better code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In the conversion to atomic_t, six_lock_slowpath() ended up calling
six_lock_wakeup() in the failure path with a state variable that was
never initialized - whoops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Since we're not generating different versions of the lock functions for
each lock type, the constant propagation we were trying to do before is
no longer useful - this is now a small code size decrease.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This deletes the crazy cast-atomic-to-unsigned-long, and replaces them
with atomic_and() and atomic_or().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

lock->state.seq is shortly being moved out of lock->state, to kill the
depedency on atomic64; in preparation for that, we change the write
locking bit to write locked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The next patch is going to move lock->seq out of lock->state. This
replaces six_relock() with a much simpler implementation based on
trylock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

 - Expanded and revamped overview documentation in six.h, giving an
   overview of all features
 - docbook-comments for all external interfaces
 - Rename some functions for simplicity, i.e.
   six_lock_ip_type() -> six_lock_ip()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

As suggested by Linus, this drops the six_lock_state union in favor of
raw bitmasks.

On the one hand, bitfields give more type-level structure to the code.
However, a significant amount of the code was working with
six_lock_state as a u64/atomic64_t, and the conversions from the
bitfields to the u64 were deemed a bit too out-there.

More significantly, because bitfield order is poorly defined (#ifdef
__LITTLE_ENDIAN_BITFIELD can be used, but is gross), incrementing the
sequence number would overflow into the rest of the bitfield if the
compiler didn't put the sequence number at the high end of the word.

The new code is a bit saner when we're on an architecture without real
atomic64_t support - all accesses to lock->state now go through
atomic64_*() operations.

On architectures with real atomic64_t support, we additionally use
atomic bit ops for setting/clearing individual bits.

Text size: 7467 bytes -> 4649 bytes - compilers still suck at
bitfields.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Originally, we used inlining/flattening to cause the compiler to
generate different versions of lock/trylock/relock/unlock for each lock
type - read, intent, and write. This made the individual functions
smaller and let the compiler eliminate table lookups: however, as the
code has gotten more complicated these optimizations have gotten less
worthwhile, and all the tricky inlining and dispatching made the code
less readable.

Text size: 11015 bytes -> 7467 bytes, and benchmarks show no loss of
performance.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Originally, the waiting bit was always set by trylock() on failure:
however, it's now set by __six_lock_type_slowpath(), with wait_lock held
- which is the more correct place to do it.

That made setting the waiting bit in trylock redundant, so this patch
deletes that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>