Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - introduce power_supply_show_enum_with_available() helper
   - change usb_types from an array into a bitmask
   - fix early usage of power_supply_property_is_writeable() resulting
     in sysfs files not being writable
   - fix missing temp1_max_alarm attribute in power-supply's hwmon
     devices

  Drivers:
   - max1720x: expose nvmem device
   - brcmstb: cleanup driver to use latest APIs
   - max77693: expose input and charging current limit
   - max17042_battery: fix state of charge reading for devices without
     current sensing
   - axp20x_battery: add AXP717 support
   - axp20x_battery: fix min/max voltage properties
   - axp20x_usb_power: add AXP717 support
   - axp20x_usb_power: add DT based input current limit

  Documentation updates

  Misc minor cleanups and fixes"

* tag 'for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
  power: supply: hwmon: Fix missing temp1_max_alarm attribute
  power: supply: Drop use_cnt check from power_supply_property_is_writeable()
  power: supply: ab8500: Constify struct kobj_type
  power: supply: max1720x: fix a double free on error in probe()
  power: supply: axp20x_battery: add support for AXP717
  power: supply: axp20x_usb_power: Add support for AXP717
  dt-bindings: power: supply: axp20x: Add AXP717 compatible
  dt-bindings: power: supply: axp20x: Add AXP717 compatible
  power: supply: axp20x_usb_power: Fix spelling mistake "reqested" -> "requested"
  power: supply: Change usb_types from an array into a bitmask
  power: supply: sysfs: Move power_supply_show_enum_with_available() up
  power: supply: sysfs: Add power_supply_show_enum_with_available() helper
  power: supply: rt9467-charger: Remove "usb_type" property write support
  power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
  power: supply: "usb_type" property may be written to
  power: supply: max1720x: add read support for nvmem
  mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  power: supply: core: constify psy_tzd_ops
  power: reset: brcmstb: Do not go into infinite loop if reset fails
  power: reset: brcmstb: Use devm_register_sys_off_handler()
  ...

Pull HSI update from Sebastian Reichel:

 - omap-ssi: remove unnecessary debugfs_create_dir() error check

* tag 'hsi-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap-ssi: Remove unnecessary debugfs_create_dir() error check

Pull slab updates from Vlastimil Babka:
 "This time it's mostly refactoring and improving APIs for slab users in
  the kernel, along with some debugging improvements.

   - kmem_cache_create() refactoring (Christian Brauner)

     Over the years have been growing new parameters to
     kmem_cache_create() where most of them are needed only for a small
     number of caches - most recently the rcu_freeptr_offset parameter.

     To avoid adding new parameters to kmem_cache_create() and adjusting
     all its callers, or creating new wrappers such as
     kmem_cache_create_rcu(), we can now pass extra parameters using the
     new struct kmem_cache_args. Not explicitly initialized fields
     default to values interpreted as unused.

     kmem_cache_create() is for now a wrapper that works both with the
     new form: kmem_cache_create(name, object_size, args, flags) and the
     legacy form: kmem_cache_create(name, object_size, align, flags,
     ctor)

   - kmem_cache_destroy() waits for kfree_rcu()'s in flight (Vlastimil
     Babka, Uladislau Rezki)

     Since SLOB removal, kfree() is allowed for freeing objects
     allocated by kmem_cache_create(). By extension kfree_rcu() as
     allowed as well, which can allow converting simple call_rcu()
     callbacks that only do kmem_cache_free(), as there was never a
     kmem_cache_free_rcu() variant. However, for caches that can be
     destroyed e.g. on module removal, the cache owners knew to issue
     rcu_barrier() first to wait for the pending call_rcu()'s, and this
     is not sufficient for pending kfree_rcu()'s due to its internal
     batching optimizations. Ulad has provided a new
     kvfree_rcu_barrier() and to make the usage less error-prone,
     kmem_cache_destroy() calls it. Additionally, destroying
     SLAB_TYPESAFE_BY_RCU caches now again issues rcu_barrier()
     synchronously instead of using an async work, because the past
     motivation for async work no longer applies. Users of custom
     call_rcu() callbacks should however keep calling rcu_barrier()
     before cache destruction.

   - Debugging use-after-free in SLAB_TYPESAFE_BY_RCU caches (Jann Horn)

     Currently, KASAN cannot catch UAFs in such caches as it is legal to
     access them within a grace period, and we only track the grace
     period when trying to free the underlying slab page. The new
     CONFIG_SLUB_RCU_DEBUG option changes the freeing of individual
     object to be RCU-delayed, after which KASAN can poison them.

   - Delayed memcg charging (Shakeel Butt)

     In some cases, the memcg is uknown at allocation time, such as
     receiving network packets in softirq context. With
     kmem_cache_charge() these may be now charged later when the user
     and its memcg is known.

   - Misc fixes and improvements (Pedro Falcato, Axel Rasmussen,
     Christoph Lameter, Yan Zhen, Peng Fan, Xavier)"

* tag 'slab-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
  mm, slab: restore kerneldoc for kmem_cache_create()
  io_uring: port to struct kmem_cache_args
  slab: make __kmem_cache_create() static inline
  slab: make kmem_cache_create_usercopy() static inline
  slab: remove kmem_cache_create_rcu()
  file: port to struct kmem_cache_args
  slab: create kmem_cache_create() compatibility layer
  slab: port KMEM_CACHE_USERCOPY() to struct kmem_cache_args
  slab: port KMEM_CACHE() to struct kmem_cache_args
  slab: remove rcu_freeptr_offset from struct kmem_cache
  slab: pass struct kmem_cache_args to do_kmem_cache_create()
  slab: pull kmem_cache_open() into do_kmem_cache_create()
  slab: pass struct kmem_cache_args to create_cache()
  slab: port kmem_cache_create_usercopy() to struct kmem_cache_args
  slab: port kmem_cache_create_rcu() to struct kmem_cache_args
  slab: port kmem_cache_create() to struct kmem_cache_args
  slab: add struct kmem_cache_args
  slab: s/__kmem_cache_create/do_kmem_cache_create/g
  memcg: add charging of already allocated slab objects
  mm/slab: Optimize the code logic in find_mergeable()
  ...

Pull memory model doc updates from Paul McKenney:
 "lkmm: Add documentation and mailing list

  This contains documentation updates from Andrea Parri and Akira
  Yokosawa. Also, there is now an lkmm@lists.linux.dev, and Boqun Feng's
  update adds this to the LKMM MAINTAINERS entry.

  Not included are a couple of more commits from Puranjay Mohan adding
  more atomic operations to LKMM, but these await a herdtools7 release
  that includes tool-side support for this functionality. With luck, I
  will send a separate pull request for these later in the merge window"

* tag 'lkmm.2024.09.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  MAINTAINERS: Add the dedicated maillist info for LKMM
  docs/memory-barriers.txt: Remove left-over references to "CACHE COHERENCY"
  tools/memory-model: simple.txt: Fix stale reference to recipes-pairs.txt
  tools/memory-model: Add locking.txt and glossary.txt to README
  tools/memory-model: Document herd7 (abstract) representation

Pull core dump update from Paul McKenney:
 "Sleep at TASK_IDLE when waiting for application core dump

  This causes the coredump_task_exit() function to sleep at TASK_IDLE,
  thus preventing task-blocked splats in case of large core dumps to
  slow devices"

* tag 'misc.2024.09.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  exit: Sleep at TASK_IDLE when waiting for application core dump

Pull kcsan update from Paul McKenney:
 "Use min() to fix Coccinelle warning.

  Courtesy of Thorsten Blum"

* tag 'kcsan.2024.09.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: Use min() to fix Coccinelle warning

Pull RCU updates from Neeraj Upadhyay:
 "Context tracking:
   - rename context tracking state related symbols and remove references
     to "dynticks" in various context tracking state variables and
     related helpers
   - force context_tracking_enabled_this_cpu() to be inlined to avoid
     leaving a noinstr section

  CSD lock:
   - enhance CSD-lock diagnostic reports
   - add an API to provide an indication of ongoing CSD-lock stall

  nocb:
   - update and simplify RCU nocb code to handle (de-)offloading of
     callbacks only for offline CPUs
   - fix RT throttling hrtimer being armed from offline CPU

  rcutorture:
   - remove redundant rcu_torture_ops get_gp_completed fields
   - add SRCU ->same_gp_state and ->get_comp_state functions
   - add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
     polled grace periods
   - add CFcommon.arch for arch-specific Kconfig options
   - print number of update types in rcu_torture_write_types()
   - add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
   - add a stall_cpu_repeat module parameter to test repeated CPU stalls
   - add argument to limit number of CPUs a guest OS can use in
     torture.sh

  rcustall:
   - abbreviate RCU CPU stall warnings during CSD-lock stalls
   - Allow dump_cpu_task() to be called without disabling preemption
   - defer printing stall-warning backtrace when holding rcu_node lock

  srcu:
   - make SRCU gp seq wrap-around faster
   - add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
     ->reschedule_count which are used in heuristics governing
     auto-expediting of normal SRCU grace periods and
     grace-period-state-machine delays
   - mark idle SRCU-barrier callbacks to help identify stuck
     SRCU-barrier callback

  rcu tasks:
   - remove RCU Tasks Rude asynchronous APIs as they are no longer used
   - stop testing RCU Tasks Rude asynchronous APIs
   - fix access to non-existent percpu regions
   - check processor-ID assumptions during chosen CPU calculation for
     callback enqueuing
   - update description of rtp->tasks_gp_seq grace-period sequence
     number
   - add rcu_barrier_cb_is_done() to identify whether a given
     rcu_barrier callback is stuck
   - mark idle Tasks-RCU-barrier callbacks
   - add *torture_stats_print() functions to print detailed diagnostics
     for Tasks-RCU variants
   - capture start time of rcu_barrier_tasks*() operation to help
     distinguish a hung barrier operation from a long series of barrier
     operations

  refscale:
   - add a TINY scenario to support tests of Tiny RCU and Tiny
     SRCU
   - optimize process_durations() operation

  rcuscale:
   - dump stacks of stalled rcu_scale_writer() instances and
     grace-period statistics when rcu_scale_writer() stalls
   - mark idle RCU-barrier callbacks to identify stuck RCU-barrier
     callbacks
   - print detailed grace-period and barrier diagnostics on
     rcu_scale_writer() hangs for Tasks-RCU variants
   - warn if async module parameter is specified for RCU implementations
     that do not have async primitives such as RCU Tasks Rude
   - make all writer tasks report upon hang
   - tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
   - use special allocator for rcu_scale_writer()
   - NULL out top-level pointers to heap memory to avoid double-free
     bugs on modprobe failures
   - maintain per-task instead of per-CPU callbacks count to avoid any
     issues with migration of either tasks or callbacks
   - constify struct ref_scale_ops

  Fixes:
   - use system_unbound_wq for kfree_rcu work to avoid disturbing
     isolated CPUs

  Misc:
   - warn on unexpected rcu_state.srs_done_tail state
   - better define "atomic" for list_replace_rcu() and
     hlist_replace_rcu() routines
   - annotate struct kvfree_rcu_bulk_data with __counted_by()"

* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
  rcu: Defer printing stall-warning backtrace when holding rcu_node lock
  rcu/nocb: Remove superfluous memory barrier after bypass enqueue
  rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
  rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
  rcu/nocb: Simplify (de-)offloading state machine
  context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
  context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
  rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
  rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
  rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
  rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
  rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
  rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
  rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
  rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
  rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
  rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
  context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
  context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
  refscale: Constify struct ref_scale_ops
  ...

Pull workqueue updates from Tejun Heo:
 "Nothing major:

   - workqueue.panic_on_stall boot param added

   - alloc_workqueue_lockdep_map() added (used by DRM)

   - Other cleanusp and doc updates"

* tag 'wq-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  kernel/workqueue.c: fix DEFINE_PER_CPU_SHARED_ALIGNED expansion
  workqueue: Fix another htmldocs build warning
  workqueue: fix null-ptr-deref on __alloc_workqueue() error
  workqueue: Don't call va_start / va_end twice
  workqueue: Fix htmldocs build warning
  workqueue: Add interface for user-defined workqueue lockdep map
  workqueue: Change workqueue lockdep map to pointer
  workqueue: Split alloc_workqueue into internal function and lockdep init
  Documentation: kernel-parameters: add workqueue.panic_on_stall
  workqueue: add cmdline parameter workqueue.panic_on_stall

Pull cgroup updates from Tejun Heo:

 - cpuset isolation improvements

 - cpuset cgroup1 support is split into its own file behind the new
   config option CONFIG_CPUSET_V1. This makes it the second controller
   which makes cgroup1 support optional after memcg

 - Handling of unavailable v1 controller handling improved during
   cgroup1 mount operations

 - union_find applied to cpuset. It makes code simpler and more
   efficient

 - Reduce spurious events in pids.events

 - Cleanups and other misc changes

 - Contains a merge of cgroup/for-6.11-fixes to receive cpuset fixes
   that further changes build upon

* tag 'cgroup-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (34 commits)
  cgroup: Do not report unavailable v1 controllers in /proc/cgroups
  cgroup: Disallow mounting v1 hierarchies without controller implementation
  cgroup/cpuset: Expose cpuset filesystem with cpuset v1 only
  cgroup/cpuset: Move cpu.h include to cpuset-internal.h
  cgroup/cpuset: add sefltest for cpuset v1
  cgroup/cpuset: guard cpuset-v1 code under CONFIG_CPUSETS_V1
  cgroup/cpuset: rename functions shared between v1 and v2
  cgroup/cpuset: move v1 interfaces to cpuset-v1.c
  cgroup/cpuset: move validate_change_legacy to cpuset-v1.c
  cgroup/cpuset: move legacy hotplug update to cpuset-v1.c
  cgroup/cpuset: add callback_lock helper
  cgroup/cpuset: move memory_spread to cpuset-v1.c
  cgroup/cpuset: move relax_domain_level to cpuset-v1.c
  cgroup/cpuset: move memory_pressure to cpuset-v1.c
  cgroup/cpuset: move common code to cpuset-internal.h
  cgroup/cpuset: introduce cpuset-v1.c
  selftest/cgroup: Make test_cpuset_prs.sh deal with pre-isolated CPUs
  cgroup/cpuset: Account for boot time isolated CPUs
  cgroup/cpuset: remove use_parent_ecpus of cpuset
  cgroup/cpuset: remove fetch_xcpus
  ...

Pull sound updates from Takashi Iwai:
 "A fairly big update at this time, both in core and driver sides.

  The core received rewrites in PCM buffer allocation handling and
  locking optimizations, PCM rate updates followed by lots of cleanups.

  In ASoC side, the legacy Intel drivers have been deprecated by AVS
  drivers which leaded to the significant amount of code reduction.
  SoundWire driver updates and other cleanups contributed more code
  reduction, too.

  USB-audio driver received a large cleanup of its big quirk table, and
  the old snd_print*() API usages in many legacy drivers are replaced
  with the standard print API.

  Here are some highlights:

  Core:
   - More optimized locking in ALSA control code
   - Rewrites of memalloc helpers for better DMA API usage
   - Drop of obsoleted vmalloc PCM buffer helper API
   - Continued MIDI2 UMP updates
   - Support of a new user-space driven timer instance
   - Update for more PCM support rates and cleanups
   - Xrun counter report in the proc files

  ASoC:
   - Continued simplification and cleanup works for ASoC
   - Extensive cleanups and refactoring of the Soundwire drivers
   - Removal of Intel machine support obsoleted by the AVS driver
   - Lots of DT schema conversions
   - Machine support for many AMD and Intel x86 platforms
   - Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek
     RTL1320 SoundWire and rev C, and Texas Instruments TAS2563

  USB-audio:
   - Add support of multiple control interfaces
   - A large rewrite of quirk table with macros
   - Support for RME Digiface USB

  HD-audio:
   - Cleanup of quirk code for Samsung Galaxy laptops
   - Clean up of detection of Cirrus codecs
   - C-Media CM9825 HD-audio codec support

  Others:
   - Rewrites to standard print API in a lot of legacy drivers"

* tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits)
  ASoC: topology: Fix redundant logical jump
  ASoC: tas2781: Add Calibration Kcontrols for Chromebook
  ASoC: amd: acp: refactor SoundWire machine driver code
  ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions
  ASoC: sdw_util/intel: move soundwire endpoint and dai link structures
  ASoC: intel: sof_sdw: rename soundwire parsing helper functions
  ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures
  ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls
  ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE)
  ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message
  ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations
  ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations
  ALSA: usb-audio: Add logitech Audio profile quirk
  ASoc: mediatek: mt8365: Remove unneeded assignment
  ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards.
  ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL.
  ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv
  ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv
  ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv
  ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links
  ...

Merge tag 'linux_kselftest-kunit-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit updates from Shuah Khan:

 - a new int_pow test suite

 - documentation update to clarify filename best practices

 - kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT

 - change to build compile_commands.json automatically instead of
   requiring a manual build

* tag 'linux_kselftest-kunit-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  lib/math: Add int_pow test suite
  kunit: tool: Build compile_commands.json
  kunit: Fix kernel-doc for EXPORT_SYMBOL_IF_KUNIT
  Documentation: KUnit: Update filename best practices

Merge tag 'linux_kselftest-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:

 - test coverage for dup_fd() failure handling in unshare_fd()

 - new selftest for the acct() syscall

 - basic uprobe testcase

 - several small fixes and cleanups to existing tests

 - user and strscpy removal as they became kunit tests

 - fixes to build failures and warnings

* tag 'linux_kselftest-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
  selftests: kselftest: Use strerror() on nolibc
  selftests/timers: Remove unused NSEC_PER_SEC macro
  selftests:resctrl: Fix build failure on archs without __cpuid_count()
  selftests/ftrace: Fix eventfs ownership testcase to find mount point
  selftests: filesystems: fix warn_unused_result build warnings
  selftests:core: test coverage for dup_fd() failure handling in unshare_fd()
  selftests/ftrace: Fix test to handle both old and new kernels
  kselftest: timers: Fix const correctness
  selftests/ftrace: Add required dependency for kprobe tests
  selftests: rust: config: disable GCC_PLUGINS
  selftests: rust: config: add trailing newline
  tracing/selftests: Run the ownership test twice
  selftests/uprobes: Add a basic uprobe testcase
  selftests: harness: rename __constructor_order for clarification
  selftests: harness: remove unneeded __constructor_order_last()
  selftest: acct: Add selftest for the acct() syscall
  selftests: lib: remove strscpy test
  selftests: user: remove user suite
  kselftest: cpufreq: Add RTC wakeup alarm
  selftests/exec: Fix grammar in an error message.
  ...

Merge tag 'linux_kselftest-nolibc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull nolibc updates from Shuah Khan:
 "Highlights:

   - Clang support (including LTO)

  Other Changes:

   - stdbool.h support

   - argc/argv/envp arguments for constructors

   - Small #include ordering fix"

* tag 'linux_kselftest-nolibc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
  tools/nolibc: x86_64: use local label in memcpy/memmove
  tools/nolibc: stackprotector: mark implicitly used symbols as used
  tools/nolibc: crt: mark _start_c() as used
  selftests/nolibc: run-tests.sh: allow building through LLVM
  selftests/nolibc: use correct clang target for s390/systemz
  selftests/nolibc: don't use libgcc when building with clang
  selftests/nolibc: run-tests.sh: avoid overwriting CFLAGS_EXTRA
  selftests/nolibc: add cc-option compatible with clang cross builds
  selftests/nolibc: add support for LLVM= parameter
  selftests/nolibc: determine $(srctree) first
  selftests/nolibc: avoid passing NULL to printf("%s")
  selftests/nolibc: report failure if no testcase passed
  tools/nolibc: compiler: use attribute((naked)) if available
  tools/nolibc: move entrypoint specifics to compiler.h
  tools/nolibc: compiler: introduce __nolibc_has_attribute()
  tools/nolibc: powerpc: limit stack-protector workaround to GCC
  tools/nolibc: mips: load current function to $t9
  tools/nolibc: arm: use clang-compatible asm syntax
  tools/nolibc: pass argc, argv and envp to constructors
  tools/nolibc: add stdbool.h header
  ...

Pull documentation update from Jonathan Corbet:
 "Another relatively mundane cycle for docs:

   - The beginning of an EEVDF scheduler document

   - More Chinese translations

   - A rethrashing of our bisection documentation

  ...plus the usual array of smaller fixes, and more than the usual
  number of typo fixes"

* tag 'docs-6.12' of git://git.lwn.net/linux: (48 commits)
  Remove duplicate "and" in 'Linux NVMe docs.
  docs:filesystems: fix spelling and grammar mistakes
  docs:filesystem: fix mispelled words on autofs page
  docs:mm: fixed spelling and grammar mistakes on vmalloc kernel stack page
  Documentation: PCI: fix typo in pci.rst
  docs/zh_CN: add the translation of kbuild/gcc-plugins.rst
  docs/process: fix typos
  docs:mm: fix spelling mistakes in heterogeneous memory management page
  accel/qaic: Fix a typo
  docs/zh_CN: update the translation of security-bugs
  docs: block: Fix grammar and spelling mistakes in bfq-iosched.rst
  Documentation: Fix spelling mistakes
  Documentation/gpu: Fix typo in Documentation/gpu/komeda-kms.rst
  scripts: sphinx-pre-install: remove unnecessary double check for $cur_version
  Loongarch: KVM: Add KVM hypercalls documentation for LoongArch
  Documentation: Document the kernel flag bdev_allow_write_mounted
  docs: scheduler: completion: Update member of struct completion
  docs: kerneldoc-preamble.sty: Suppress extra spaces in CJK literal blocks
  docs: submitting-patches: Advertise b4
  docs: update dev-tools/kcsan.rst url about KTSAN
  ...

Pull m68k updates from Geert Uytterhoeven:

 - Use swap() helper for __arch_xchg()

 - Fix kernel_clone_args.flags in m68k_clone()

 - defconfig updates

* tag 'm68k-for-v6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v6.11-rc1
  m68k: Fix kernel_clone_args.flags in m68k_clone()
  m68k: cmpxchg: Use swap() to improve code

Pull x86 timer updates from Thomas Gleixner:

 - Use the topology information of number of packages for making the
   decision about TSC trust instead of using the number of online nodes
   which is not reflecting the real topology.

 - Stop the PIT timer 0 when its not in use as to stop pointless
   emulation in the VMM.

 - Fix the PIT timer stop sequence for timer 0 so it truly stops both
   real hardware and buggy VMM emulations.

* tag 'x86-timers-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Check for sockets instead of CPUs to make code match comment
  clockevents/drivers/i8253: Fix stop sequence for timer 0
  x86/i8253: Disable PIT timer 0 when not in use
  x86/tsc: Use topology_max_packages() to get package number

Pull misc x86 updates from Thomas Gleixner:

 - Rework kcpuid to handle the the autogenerated CSV file correctly and
   update the CSV file to cover the whole zoo of CPUID.

 - Avoid memcpy() for ia32 syscall_get_arguments() and use direct
   assignments as fortified memcpy() is unhappy about writing/reading
   beyond the end of the addresses destination/source struct member

 - A few new PCI IDs for AMD

 - Update MAINTAINERS to cover x86 specific selftests

* tag 'x86-misc-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add selftests/x86 entry
  x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h-70h
  x86/syscall: Avoid memcpy() for ia32 syscall_get_arguments()
  MAINTAINERS: Add x86 cpuid database entry
  tools/x86/kcpuid: Introduce a complete cpuid bitfields CSV file
  tools/x86/kcpuid: Parse subleaf ranges if provided
  tools/x86/kcpuid: Recognize all leaves with subleaves
  tools/x86/kcpuid: Strip bitfield names leading/trailing whitespace
  tools/x86/kcpuid: Protect against faulty "max subleaf" values
  tools/x86/kcpuid: Set max possible subleaves count to 64
  tools/x86/kcpuid: Properly align long-description columns
  tools/x86/kcpuid: Remove unused variable
  x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h

Pull x86 platform update from Thomas Gleixner:
 "Remove a stale declaration from the UV platform code"

* tag 'x86-platform-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Remove unused declaration uv_irq_2_mmr_info()

Pull x86 memory management updates from Thomas Gleixner:

 - Make LAM enablement safe vs. kernel threads using a process mm
   temporarily as switching back to the process would not update CR3 and
   therefore not enable LAM causing faults in user space when using
   tagged pointers. Cure it by synchronizing LAM enablement via IPIs to
   all CPUs which use the related mm.

 - Cure a LAM harmless inconsistency between CR3 and the state during
   context switch. It's both confusing and prone to lead to real bugs

 - Handle alt stack handling for threads which run with a non-zero
   protection key. The non-zero key prevents the kernel to access the
   alternate stack. Cure it by temporarily enabling all protection keys
   for the alternate stack setup/restore operations.

 - Provide a EFI config table identity mapping for kexec kernel to
   prevent kexec fails because the new kernel cannot access the config
   table array

 - Use GB pages only when a full GB is mapped in the identity map as
   otherwise the CPU can speculate into reserved areas after the end of
   memory which causes malfunction on UV systems.

 - Remove the noisy and pointless SRAT table dump during boot

 - Use is_ioremap_addr() for iounmap() address range checks instead of
   high_memory. is_ioremap_addr() is more precise.

* tag 'x86-mm-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioremap: Improve iounmap() address range checks
  x86/mm: Remove duplicate check from build_cr3()
  x86/mm: Remove unused NX related declarations
  x86/mm: Remove unused CR3_HW_ASID_BITS
  x86/mm: Don't print out SRAT table information
  x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
  x86/kexec: Add EFI config table identity mapping for kexec kernel
  selftests/mm: Add new testcases for pkeys
  x86/pkeys: Restore altstack access in sigreturn()
  x86/pkeys: Update PKRU to enable all pkeys before XSAVE
  x86/pkeys: Add helper functions to update PKRU on the sigframe
  x86/pkeys: Add PKRU as a parameter in signal handling functions
  x86/mm: Cleanup prctl_enable_tagged_addr() nr_bits error checking
  x86/mm: Fix LAM inconsistency during context switch
  x86/mm: Use IPIs to synchronize LAM enablement

Pull x86 FRED updates from Thomas Gleixner:

 - Enable FRED right after init_mem_mapping() because at that point the
   early IDT fault handler is replaced by the real fault handler. The
   real fault handler retrieves the faulting address from the stack
   frame and not from CR2 when the FRED feature is set. But that
   obviously only works when FRED is enabled in the CPU as well.

 - Set SS to __KERNEL_DS when enabling FRED to prevent a corner case
   where ERETS can observe a SS mismatch and raises a #GP.

* tag 'x86-fred-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Set FRED RSP0 on return to userspace instead of context switch
  x86/msr: Switch between WRMSRNS and WRMSR with the alternatives mechanism
  x86/entry: Test ti_work for zero before processing individual bits
  x86/fred: Set SS to __KERNEL_DS when enabling FRED
  x86/fred: Enable FRED right after init_mem_mapping()
  x86/fred: Move FRED RSP initialization into a separate function
  x86/fred: Parse cmdline param "fred=" in cpu_parse_early_param()

Pull x86 fpu updates from Thomas Gleixner:
 "Provide FPU buffer layout in core dumps:

  Debuggers have guess the FPU buffer layout in core dumps, which is
  error prone. This is because AMD and Intel layouts differ.

  To avoid buggy heuristics add a ELF section which describes the buffer
  layout which can be retrieved by tools"

* tag 'x86-fpu-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/elf: Add a new FPU buffer layout info to x86 core files

Pull x86 core update from Thomas Gleixner:
 "Enable UBSAN traps for x86, which provides better reporting through
  metadata encodeded into UD1"

* tag 'x86-core-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/traps: Enable UBSAN traps on x86

Pull x86 APIC updates from Thomas Gleixner:

 - Handle an allocation failure in the IO/APIC code gracefully instead
   of crashing the machine.

 - Remove support for APIC local destination mode on 64bit

   Logical destination mode of the local APIC is used for systems with
   up to 8 CPUs. It has an advantage over physical destination mode as
   it allows to target multiple CPUs at once with IPIs. That advantage
   was definitely worth it when systems with up to 8 CPUs were state of
   the art for servers and workstations, but that's history.

   In the recent past there were quite some reports of new laptops
   failing to boot with logical destination mode, but they work fine
   with physical destination mode. That's not a suprise because physical
   destination mode is guaranteed to work as it's the only way to get a
   CPU up and running via the INIT/INIT/STARTUP sequence. Some of the
   affected systems were cured by BIOS updates, but not all OEMs provide
   them.

   As the number of CPUs keep increasing, logical destination mode
   becomes less used and the benefit for small systems, like laptops, is
   not really worth the trouble. So just remove logical destination mode
   support for 64bit and be done with it.

 - Code and comment cleanups in the APIC area.

* tag 'x86-apic-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Fix comment on IRQ vector layout
  x86/apic: Remove unused extern declarations
  x86/apic: Remove logical destination mode for 64-bit
  x86/apic: Remove unused inline function apic_set_eoi_cb()
  x86/ioapic: Cleanup remaining coding style issues
  x86/ioapic: Cleanup line breaks
  x86/ioapic: Cleanup bracket usage
  x86/ioapic: Cleanup comments
  x86/ioapic: Move replace_pin_at_irq_node() to the call site
  iommu/vt-d: Cleanup apic_printk()
  x86/mpparse: Cleanup apic_printk()s
  x86/ioapic: Cleanup guarded debug printk()s
  x86/ioapic: Cleanup apic_printk()s
  x86/apic: Cleanup apic_printk()s
  x86/apic: Provide apic_printk() helpers
  x86/ioapic: Use guard() for locking where applicable
  x86/ioapic: Cleanup structs
  x86/ioapic: Mark mp_alloc_timer_irq() __init
  x86/ioapic: Handle allocation failures gracefully

Pull x86 cleanups from Thomas Gleixner:
 "A set of cleanups across x86:

   - Use memremap() for the EISA probe instead of ioremap(). EISA is
     strictly memory and not MMIO

   - Cleanups and enhancement all over the place"

* tag 'x86-cleanups-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/EISA: Dereference memory directly instead of using readl()
  x86/extable: Remove unused declaration fixup_bug()
  x86/boot/64: Strip percpu address space when setting up GDT descriptors
  x86/cpu: Clarify the error message when BIOS does not support SGX
  x86/kexec: Add comments around swap_pages() assembly to improve readability
  x86/kexec: Fix a comment of swap_pages() assembly
  x86/sgx: Fix a W=1 build warning in function comment
  x86/EISA: Use memremap() to probe for the EISA BIOS signature
  x86/mtrr: Remove obsolete declaration for mtrr_bp_restore()
  x86/cpu_entry_area: Annotate percpu_setup_exception_stacks() as __init

Pull x86 build updates from Thomas Gleixner:
 "Updates for KCOV instrumentation on x86:

   - Prevent spurious KCOV coverage in common_interrupt()

   - Fixup the KCOV Makefile directive which got stale due to a source
     file rename

   - Exclude stack unwinding from KCOV as it creates large amounts of
     uninteresting coverage

   - Provide a self test to validate that KCOV coverage of the interrupt
     handling code starts not before preempt count got updated"

* tag 'x86-build-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Ignore stack unwinding in KCOV
  module: Fix KCOV-ignored file name
  kcov: Add interrupt handling self test
  x86/entry: Remove unwanted instrumentation in common_interrupt()

Pull SoC ARM platform updates from Arnd Bergmann:
 "Most of these updates are for removing dead code on the Samsung S3C,
  NXP i.MX, TI OMAP and TI DaVinci platforms, though this appears to be
  a coincidence.

  There are also cleanups for the Marvell Orion family and the Arm
  integrator series and a Kconfig change for Broadcom"

* tag 'soc-arm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dove: Drop a write-only variable
  ARM: orion5x: Switch to new sys-off handler API
  ARM: mvebu: Warn about memory chunks too small for DDR training
  ARM: imx: Annotate imx7d_enet_init() as __init
  ARM: OMAP1: Remove unused declarations in arch/arm/mach-omap1/pm.h
  ARM: s3c: remove unused s3c2410_cpu_suspend() declaration
  ARM: s3c: remove unused declarations for s3c6400
  ARM: s3c: Remove unused s3c_init_uart_irqs() declaration
  ARM: davinci: remove unused cpuidle code
  ARM: davinci: remove unused davinci_init_ide() declaration
  ARM: davinci: remove unused davinci_cfg_reg_list() declaration
  ARM: mach-imx: imx6sx: Remove Ethernet refclock setting
  MAINTAINERS: Add entry for Samsung Exynos850 SoC
  ARM: bcm: Select ARM_GIC_V3 for ARCH_BRCMSTB
  ARM: omap2: Switch to use kmemdup_array()
  ARM: omap1: Remove unused struct 'dma_link_info'
  ARM: s3c: Drop explicit initialization of struct i2c_device_id::driver_data to 0

Pull SoC defconfig updates from Arnd Bergmann:
 "The updates to the defconfig files are fairly small, enabling drivers
  for eight of the arm and riscv based platforms"

* tag 'soc-defconfig-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: defconfig: enable mt8365 sound
  riscv: defconfig: Enable pinctrl support for CV18XX Series SoC
  arm64: defconfig: Enable ADP5585 GPIO and PWM drivers
  arm64: defconfig: Enable Tegra194 PCIe Endpoint
  arm64: defconfig: Enable E5010 JPEG Encoder
  riscv: defconfig: sophgo: enable clks for sg2042
  arm64: defconfig: build CONFIG_REGULATOR_QCOM_REFGEN as module
  ARM: configs: at91: enable config flags for sam9x7 SoC family
  arm64: defconfig: Enable R-Car Ethernet-TSN support
  ARM: shmobile: defconfig: Enable slab hardening and kmalloc buckets
  arm64: defconfig: Enable AK4619 codec support

Pull SoC driver updates from Arnd Bergmann:
 "The driver updates seem larger this time around, with changes is many
  of the SoC specific drivers, both the custom drivers/soc ones and the
  closely related subsystems (memory, bus, firmware, reset, ...).

  The at91 platform gains support for sam9x7 chips in the soc and power
  management code. This is the latest variant of one of the oldest still
  supported SoC families, using the ARM9 (ARMv5) core.

  As usual, the qualcomm snapdragon platform gets a ton of updates in
  many of their drivers to add more features and additional SoC support.
  Most of these are somewhat firmware related as the platform has a
  number of firmware based interfaces to the kernel. A notable addition
  here is the inclusion of trace events to two of these drivers.

  Herve Codina and Christophe Leroy are now sending updates for
  drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
  and Arm specific platforms and has previously been problematic to
  maintain. The first update here contains support for newer PowerPC
  variants and some cleanups.

  The turris mox firmware driver has a number of updates, mostly
  cleanups.

  The Arm SCMI firmware driver gets a major rework to modularize the
  existing code into separately loadable drivers for the various
  transports, the addition of custom NXP i.MX9 interfaces and a number
  of smaller updates.

  The Arm FF-A firmware driver gets a feature update to support the v1.2
  version of the specification.

  The reset controller drivers have some smaller cleanups and a newly
  added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.

  The memory controller drivers get some cleanups and refactoring for
  Tegra, TI, Freescale/NXP and a couple more platforms.

  Finally there are lots of minor updates to firmware (raspberry pi,
  tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
  amlogic, mediatek) drivers and their DT bindings"

* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
  firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
  platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
  bus: sunxi-rsb: Simplify code with dev_err_probe()
  soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
  soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
  dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
  soc: fsl: qbman: Remove redundant warnings
  soc: fsl: qbman: Use iommu_paging_domain_alloc()
  MAINTAINERS: Add QE files related to the Freescale QMC controller
  soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
  soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
  soc: fsl: qe: Add missing PUSHSCHED command
  soc: fsl: qe: Add resource-managed muram allocators
  soc: fsl: cpm1: qmc: Introduce qmc_version
  soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
  soc: fsl: cpm1: qmc: Handle RPACK initialization
  soc: fsl: cpm1: qmc: Rename qmc_chan_command()
  soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
  soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
  soc: fsl: cpm1: qmc: Re-order probe() operations
  ...

Pull SoC devicetree updates from Arnd Bergmann:
 "New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
  R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
  of these are variants of already supported chips, in particular the
  last one is almost identical to MSM8939.

  Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
  STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
  and T-HEAD.

  The added Qualcomm platform support once again dominates the changes,
  with seven phones and three laptops getting added in addition to many
  new features on existing machines. The Snapdragon X1E support
  specifically keeps improving.

  The other new machines are:

   - eight new machines using various 64-bit Rockchips SoCs, both on the
     consumer/gaming side and developer boards

   - three industrial boards with 64-bit i.MX, which is a very low
     number for them.

   - four more servers using a 32-bit Speed BMC

   - three boards using STM32MP1 SoCs

   - one new machine each using allwinner, amlogic, broadcom and renesas
     chips"

* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
  arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
  arm64: dts: mediatek: add audio support for mt8365-evk
  arm64: dts: mediatek: add afe support for mt8365 SoC
  arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
  arm64: dts: mediatek: mt8186: Add svs node
  arm64: dts: mediatek: mt8186: Add power domain for DPI
  arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
  arm64: dts: mt8183: add dpi node to mt8183
  arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
  arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
  arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
  arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
  arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
  arm64: dts: nuvoton: Add syscon to the system-management node
  ARM: dts: Fix undocumented LM75 compatible nodes
  arm64: dts: toshiba: Fix pl011 and pl022 clocks
  ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: Add MECIO1 and MECT1S board variants
  ...

Pull spi updates from Mark Brown:
 "This is quite a quiet release for SPI. The one new core feature here
  is support for configuring the state of the MOSI pin when the bus is
  idle, there are some devices which are very fragile in this regard
  even when the chip select signal is not asserted. Otherwise we have
  some new driver support, a bunch of small fixes and some general
  cleanup work.

   - Support for configuring the state of the MOSI pin when the the bus
     is idle

   - Add the Elgin JG0309-01 in spidev

   - Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
     i.MX8ULP, and Rockchip RK3576 controllers

  I also accidentally pulled in an IIO DT bindings update due to a typo
  when applying the MOSI idle state patches"

* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
  spi: geni-qcom: Use devm functions to simplify code
  spi: remove spi_controller_is_slave() and spi_slave_abort()
  platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
  spi: slave-mt27xx: switch to use target_abort
  spi: spidev: switch to use spi_target_abort()
  spi: slave-system-control: switch to use spi_target_abort()
  spi: slave-time: switch to use spi_target_abort()
  spi: switch to use spi_controller_is_target()
  spi: fspi: add support for imx8ulp
  spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
  dt-bindings: spi: nxp-fspi: add imx8ulp support
  spi: spidev_fdx: Fix the wrong format specifier
  spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
  spi: dt-bindings: Add rockchip,rk3576-spi compatible
  spi: Revert "spi: Insert the missing pci_dev_put()before return"
  spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
  spi: ppc4xx: Sort headers
  spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
  spi: zynqmp-gqspi: Simplify with dev_err_probe()
  spi: zynqmp-gqspi: Use devm_spi_alloc_host()
  ...

Pull regulator updates from Mark Brown:
 "This release is almost all cleanup work of various kinds, while the
  diffstat for the core is quite large this is almost all cleanups and
  documentation improvments with some small fixes rather than any new
  feature work. We do have support for a couple of new devices but these
  are small additions to existing drivers rather than new drivers.

   - Removal of the SM5703 driver which does not have it's dependencies
     available.

   - Support for Allwinner AXP717, and Qualcomm WCN6855.

  The Allwinner support shares some commits with the MFD tree"

* tag 'regulator-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (66 commits)
  regulator: sm5703: Remove because it is unused and fails to build
  regulator: Split up _regulator_get()
  regulator: update some comments ([gs]et_voltage_vsel vs [gs]et_voltage_sel)
  regulator: max8973: Use irq_get_trigger_type() helper
  regulator: core: fix the broken behavior of regulator_dev_lookup()
  regulator: max77650: Use container_of and constify static data
  regulator: hi6421v530: Use container_of and constify static data
  regulator: hi6421v530: Drop unused 'eco_microamp'
  regulator: qcom-refgen: Constify static data
  regulator: pfuze100: Constify static data
  regulator: pcap: Constify static data
  regulator: mtk-dvfsrc: Constify static data
  regulator: max77826: Constify static data
  regulator: max77826: Drop unused 'rdesc' in 'struct max77826_regulator_info'
  regulator: tps65023: Constify static data
  regulator: hi6421v600: Constify static data
  regulator: hi6421: Constify static data
  regulator: da9121: Constify static data
  regulator: da9063: Constify static data
  regulator: da9055: Constify static data
  ...

Pull regmap updates from Mark Brown:
 "The main update here is Matti's work allowing regmap irqdomains to be
  given custom names (allowing multiple interrupt controllers associatd
  with a single struct device), this pulls in some commits from Thomas'
  tree which it depends on.

  Otherwise there's a bit of work on improving handling of regmaps
  protected with spinlocks when used with complex cache types, fixing
  some valid but harmless lockdep reports seen with some new driver
  work"

* tag 'regmap-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: kunit: Add coverage of spinlocked regmaps
  regcache: use map->alloc_flags also for allocating cache
  regmap: Use locking during kunit tests
  regmap: Hold the regmap lock when allocating and freeing the cache
  regmap: Allow setting IRQ domain name suffix

Pull printk updates from Petr Mladek:
 "This is the "last" part of the support for the new nbcon consoles.
  Where "nbcon" stays for "No Big console lock CONsoles" aka not under
  the console_lock.

  New callbacks are added to struct console:

   - write_thread() for flushing nbcon consoles in task context.

   - write_atomic() for flushing nbcon consoles in atomic context,
     including NMI.

   - con->device_lock() and device_unlock() for taking the driver
     specific lock, for example, port->lock.

  New printk-specific kthreads are created:

   - per-console kthreads which get responsible for flushing normal
     priority messages on nbcon consoles.

   - thread which gets responsible for flushing normal priority messages
     on all consoles when CONFIG_RT enabled.

  The new callbacks are called under a special per-console lock which
  has already been added back in v6.7. It allows to distinguish three
  severities: normal, emergency, and panic. A context with a higher
  priority could take over the ownership when it is safe even in the
  middle of handling a record. The panic context could do it even when
  it is not safe. But it is allowed only for the final desperate flush
  before entering the infinite loop.

  The new lock helps to flush the messages directly in emergency and
  panic contexts. But it is not enough in all situations:

   - console_lock() is still need for synchronization against boot
     consoles.

   - con->device_lock() is need for synchronization against other
     operations on the same HW, e.g. serial port speed setting,
     non-printk related read/write.

  The dependency on con->device_lock() is mutual. Any code taking the
  driver specific lock has to acquire the related nbcon console context
  as well. For example, see the new uart_port_lock() API. It provides
  the necessary synchronization against emergency and panic contexts
  where the messages are flushed only under the new per-console lock.

  Maybe surprisingly, a quite tricky part is the decision how to flush
  the consoles in various situations. It has to take into account:

   - message priority:    normal, emergency, panic

   - scheduling context:  task, atomic, deferred_legacy

   - registered consoles: boot, legacy, nbcon

   - threads are running: early boot, suspend, shutdown, panic

   - caller:              printk(), pr_flush(), printk_flush_in_panic(),
                          console_unlock(), console_start(), ...

  The primary decision is made in printk_get_console_flush_type(). It
  creates a hint what the caller should do:

   - flush nbcon consoles directly or via the kthread

   - call the legacy loop (console_unlock()) directly or via irq_work

  The existing behavior is preserved for the legacy consoles. The only
  exception is that they are not longer flushed directly from printk()
  in panic() before CPUs are stopped. But this blocking happens only
  when at least one nbcon console is registered. The motivation is to
  increase a chance to produce the crash dump. They legacy consoles
  might create a deadlock in compare with nbcon consoles. The nbcon
  console should allow to see the messages even when the crash dump
  fails.

  There are three possible ways how nbcon consoles are flushed:

   - The per-nbcon-console kthread is responsible for flushing messages
     added with the normal priority. This is the default mode.

   - The legacy loop, aka console_unlock(), is used when there is still
     a boot console registered. There is no easy way how to match an
     early console driver with a nbcon console driver. And the
     console_lock() provides the only reliable serialization at the
     moment.

     The legacy loop uses either con->write_atomic() or
     con->write_thread() callbacks depending on whether it is allowed to
     schedule. The atomic variant has to be used from printk().

   - In other situations, the messages are flushed directly using
     write_atomic() which can be called in any context, including NMI.
     It is primary needed during early boot or shutdown, in emergency
     situations, and panic.

  The emergency priority is used by a code called within
  nbcon_cpu_emergency_enter()/exit(). At the moment, it is used in four
  situations: WARN(), Oops, lockdep, and RCU stall reports.

  Finally, there is no nbcon console at the moment. It means that the
  changes should _not_ modify the existing behavior. The only exception
  is CONFIG_RT which would force offloading the legacy loop, for normal
  priority context, into the dedicated kthread"

* tag 'printk-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (54 commits)
  printk: Avoid false positive lockdep report for legacy printing
  printk: nbcon: Assign nice -20 for printing threads
  printk: Implement legacy printer kthread for PREEMPT_RT
  tty: sysfs: Add nbcon support for 'active'
  proc: Add nbcon support for /proc/consoles
  proc: consoles: Add notation to c_start/c_stop
  printk: nbcon: Show replay message on takeover
  printk: Provide helper for message prepending
  printk: nbcon: Rely on kthreads for normal operation
  printk: nbcon: Use thread callback if in task context for legacy
  printk: nbcon: Relocate nbcon_atomic_emit_one()
  printk: nbcon: Introduce printer kthreads
  printk: nbcon: Init @nbcon_seq to highest possible
  printk: nbcon: Add context to usable() and emit()
  printk: Flush console on unregister_console()
  printk: Fail pr_flush() if before SYSTEM_SCHEDULING
  printk: nbcon: Add function for printers to reacquire ownership
  printk: nbcon: Use raw_cpu_ptr() instead of open coding
  printk: Use the BITS_PER_LONG macro
  lockdep: Mark emergency sections in lockdep splats
  ...

Pull debugobjects updates from Thomas Gleixner:

 - Use the threshold to check for the pool refill condition and not the
   run time recorded all time low fill value, which is lower than the
   threshold and therefore causes refills to be delayed.

 - KCSAN annotation updates and simplification of the fill_pool() code.

* tag 'core-debugobjects-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Remove redundant checks in fill_pool()
  debugobjects: Fix conditions in fill_pool()
  debugobjects: Fix the compilation attributes of some global variables

Pull timer updates from Thomas Gleixner:
 "Core:

   - Overhaul of posix-timers in preparation of removing the workaround
     for periodic timers which have signal delivery ignored.

   - Remove the historical extra jiffie in msleep()

     msleep() adds an extra jiffie to the timeout value to ensure
     minimal sleep time. The timer wheel ensures minimal sleep time
     since the large rewrite to a non-cascading wheel, but the extra
     jiffie in msleep() remained unnoticed. Remove it.

   - Make the timer slack handling correct for realtime tasks.

     The procfs interface is inconsistent and does neither reflect
     reality nor conforms to the man page. Show the correct 0 slack for
     real time tasks and enforce it at the core level instead of having
     inconsistent individual checks in various timer setup functions.

   - The usual set of updates and enhancements all over the place.

  Drivers:

   - Allow the ACPI PM timer to be turned off during suspend

   - No new drivers

   - The usual updates and enhancements in various drivers"

* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  ntp: Make sure RTC is synchronized when time goes backwards
  treewide: Fix wrong singular form of jiffies in comments
  cpu: Use already existing usleep_range()
  timers: Rename next_expiry_recalc() to be unique
  platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
  clocksource/drivers/jcore: Use request_percpu_irq()
  clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
  clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
  clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
  clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
  platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
  clocksource: acpi_pm: Add external callback for suspend/resume
  clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
  dt-bindings: timer: rockchip: Add rk3576 compatible
  timers: Annotate possible non critical data race of next_expiry
  timers: Remove historical extra jiffie for timeout in msleep()
  hrtimer: Use and report correct timerslack values for realtime tasks
  hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
  timers: Add sparse annotation for timer_sync_wait_running().
  signal: Replace BUG_ON()s
  ...

Pull irq updates from Thomas Gleixner:
 "Core:

   - Remove a global lock in the affinity setting code

     The lock protects a cpumask for intermediate results and the lock
     causes a bottleneck on simultaneous start of multiple virtual
     machines. Replace the lock and the static cpumask with a per CPU
     cpumask which is nicely serialized by raw spinlock held when
     executing this code.

   - Provide support for giving a suffix to interrupt domain names.

     That's required to support devices with subfunctions so that the
     domain names are distinct even if they originate from the same
     device node.

   - The usual set of cleanups and enhancements all over the place

  Drivers:

   - Support for longarch AVEC interrupt chip

   - Refurbishment of the Armada driver so it can be extended for new
     variants.

   - The usual set of cleanups and enhancements all over the place"

* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  genirq: Use cpumask_intersects()
  genirq/cpuhotplug: Use cpumask_intersects()
  irqchip/apple-aic: Only access system registers on SoCs which provide them
  irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
  irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
  dt-bindings: apple,aic: Document A7-A11 compatibles
  irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
  genirq/msi: Use kmemdup_array() instead of kmemdup()
  genirq/proc: Change the return value for set affinity permission error
  genirq/proc: Use irq_move_pending() in show_irq_affinity()
  genirq/proc: Correctly set file permissions for affinity control files
  genirq: Get rid of global lock in irq_do_set_affinity()
  genirq: Fix typo in struct comment
  irqchip/loongarch-avec: Add AVEC irqchip support
  irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
  irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
  LoongArch: Architectural preparation for AVEC irqchip
  LoongArch: Move irqchip function prototypes to irq-loongson.h
  irqchip/loongson-pch-msi: Switch to MSI parent domains
  softirq: Remove unused 'action' parameter from action callback
  ...

Pull clocksource watchdog updates from Thomas Gleixner:

 - Make the uncertainty margin handling more robust to prevent false
   positives

 - Clarify comments

* tag 'timers-clocksource-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Set cs_watchdog_read() checks based on .uncertainty_margin
  clocksource: Fix comments on WATCHDOG_THRESHOLD & WATCHDOG_MAX_SKEW
  clocksource: Improve comments for watchdog skew bounds

Pull CPU hotplug updates from Thomas Gleixner:

 - Prepare the core for supporting parallel hotplug on loongarch

 - A small set of cleanups and enhancements

* tag 'smp-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp: Mark smp_prepare_boot_cpu() __init
  cpu: Fix W=1 build kernel-doc warning
  cpu/hotplug: Provide weak fallback for arch_cpuhp_init_parallel_bringup()
  cpu/hotplug: Make HOTPLUG_PARALLEL independent of HOTPLUG_SMT

Pull lsm updates from Paul Moore:

 - Move the LSM framework to static calls

   This transitions the vast majority of the LSM callbacks into static
   calls. Those callbacks which haven't been converted were left as-is
   due to the general ugliness of the changes required to support the
   static call conversion; we can revisit those callbacks at a future
   date.

 - Add the Integrity Policy Enforcement (IPE) LSM

   This adds a new LSM, Integrity Policy Enforcement (IPE). There is
   plenty of documentation about IPE in this patches, so I'll refrain
   from going into too much detail here, but the basic motivation behind
   IPE is to provide a mechanism such that administrators can restrict
   execution to only those binaries which come from integrity protected
   storage, e.g. a dm-verity protected filesystem. You will notice that
   IPE requires additional LSM hooks in the initramfs, dm-verity, and
   fs-verity code, with the associated patches carrying ACK/review tags
   from the associated maintainers. We couldn't find an obvious
   maintainer for the initramfs code, but the IPE patchset has been
   widely posted over several years.

   Both Deven Bowers and Fan Wu have contributed to IPE's development
   over the past several years, with Fan Wu agreeing to serve as the IPE
   maintainer moving forward. Once IPE is accepted into your tree, I'll
   start working with Fan to ensure he has the necessary accounts, keys,
   etc. so that he can start submitting IPE pull requests to you
   directly during the next merge window.

 - Move the lifecycle management of the LSM blobs to the LSM framework

   Management of the LSM blobs (the LSM state buffers attached to
   various kernel structs, typically via a void pointer named "security"
   or similar) has been mixed, some blobs were allocated/managed by
   individual LSMs, others were managed by the LSM framework itself.

   Starting with this pull we move management of all the LSM blobs,
   minus the XFRM blob, into the framework itself, improving consistency
   across LSMs, and reducing the amount of duplicated code across LSMs.
   Due to some additional work required to migrate the XFRM blob, it has
   been left as a todo item for a later date; from a practical
   standpoint this omission should have little impact as only SELinux
   provides a XFRM LSM implementation.

 - Fix problems with the LSM's handling of F_SETOWN

   The LSM hook for the fcntl(F_SETOWN) operation had a couple of
   problems: it was racy with itself, and it was disconnected from the
   associated DAC related logic in such a way that the LSM state could
   be updated in cases where the DAC state would not. We fix both of
   these problems by moving the security_file_set_fowner() hook into the
   same section of code where the DAC attributes are updated. Not only
   does this resolve the DAC/LSM synchronization issue, but as that code
   block is protected by a lock, it also resolve the race condition.

 - Fix potential problems with the security_inode_free() LSM hook

   Due to use of RCU to protect inodes and the placement of the LSM hook
   associated with freeing the inode, there is a bit of a challenge when
   it comes to managing any LSM state associated with an inode. The VFS
   folks are not open to relocating the LSM hook so we have to get
   creative when it comes to releasing an inode's LSM state.
   Traditionally we have used a single LSM callback within the hook that
   is triggered when the inode is "marked for death", but not actually
   released due to RCU.

   Unfortunately, this causes problems for LSMs which want to take an
   action when the inode's associated LSM state is actually released; so
   we add an additional LSM callback, inode_free_security_rcu(), that is
   called when the inode's LSM state is released in the RCU free
   callback.

 - Refactor two LSM hooks to better fit the LSM return value patterns

   The vast majority of the LSM hooks follow the "return 0 on success,
   negative values on failure" pattern, however, there are a small
   handful that have unique return value behaviors which has caused
   confusion in the past and makes it difficult for the BPF verifier to
   properly vet BPF LSM programs. This includes patches to
   convert two of these"special" LSM hooks to the common 0/-ERRNO pattern.

 - Various cleanups and improvements

   A handful of patches to remove redundant code, better leverage the
   IS_ERR_OR_NULL() helper, add missing "static" markings, and do some
   minor style fixups.

* tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (40 commits)
  security: Update file_set_fowner documentation
  fs: Fix file_set_fowner LSM hook inconsistencies
  lsm: Use IS_ERR_OR_NULL() helper function
  lsm: remove LSM_COUNT and LSM_CONFIG_COUNT
  ipe: Remove duplicated include in ipe.c
  lsm: replace indirect LSM hook calls with static calls
  lsm: count the LSMs enabled at compile time
  kernel: Add helper macros for loop unrolling
  init/main.c: Initialize early LSMs after arch code, static keys and calls.
  MAINTAINERS: add IPE entry with Fan Wu as maintainer
  documentation: add IPE documentation
  ipe: kunit test for parser
  scripts: add boot policy generation program
  ipe: enable support for fs-verity as a trust provider
  fsverity: expose verified fsverity built-in signatures to LSMs
  lsm: add security_inode_setintegrity() hook
  ipe: add support for dm-verity as a trust provider
  dm-verity: expose root hash digest and signature data to LSMs
  block,lsm: add LSM blob and new LSM hooks for block devices
  ipe: add permissive toggle
  ...

Pull selinux updates from Paul Moore:

 - Ensure that both IPv4 and IPv6 connections are properly initialized

   While we always properly initialized IPv4 connections early in their
   life, we missed the necessary IPv6 change when we were adding IPv6
   support.

 - Annotate the SELinux inode revalidation function to quiet KCSAN

   KCSAN correctly identifies a race in __inode_security_revalidate()
   when we check to see if an inode's SELinux has been properly
   initialized. While KCSAN is correct, it is an intentional choice made
   for performance reasons; if necessary, we check the state a second
   time, this time with a lock held, before initializing the inode's
   state.

 - Code cleanups, simplification, etc.

   A handful of individual patches to simplify some SELinux kernel
   logic, improve return code granularity via ERR_PTR(), follow the
   guidance on using KMEM_CACHE(), and correct some minor style
   problems.

* tag 'selinux-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix style problems in security/selinux/include/audit.h
  selinux: simplify avc_xperms_audit_required()
  selinux: mark both IPv4 and IPv6 accepted connection sockets as labeled
  selinux: replace kmem_cache_create() with KMEM_CACHE()
  selinux: annotate false positive data race to avoid KCSAN warnings
  selinux: refactor code to return ERR_PTR in selinux_netlbl_sock_genattr
  selinux: Streamline type determination in security_compute_sid