The main changes are PTP support for RTC, additional NVM error codes,
backing store v2 firmware APIs.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King says:

====================
net: stmmac/xpcs: modernise PCS support

This series updates xpcs and stmmac for the recent changes to phylink
to better support split PCS and to get rid of private MAC validation
functions.

This series is slightly more involved than other conversions as stmmac
has already had optional proper split PCS support.

The first six patches of this series were originally posted on 16th
December for CFT, and Wong Vee Khee reported his Intel Elkhart Lake
setup was fine the first six these. However, no tested-by was given.

The patches:

1) Provide a function to query the xpcs for the interface modes that
   are supported.

2) Populates the MAC capabilities and switches stmmac_validate() to use
   phylink_get_linkmodes(). We do not use phylink_generic_validate() yet
   as (a) we do not always have the supported interfaces populated, and
   (b) the existing code does not restrict based on interface. There
   should be no functional effect from this patch.

3) Populates phylink's supported interfaces from the xpcs when the xpcs
   is configured by firmware and also the firmware configured interface
   mode. Note: this will restrict stmmac to only supporting these
   interfaces modes - stmmac maintainers need to verify that this
   behaviour is acceptable.

4) stmmac_validate() tail-calls xpcs_validate(), but we don't need it to
   now that PCS have their own validation method. Convert stmmac and
   xpcs to use this method instead.

5) xpcs sets the poll field of phylink_pcs to true, meaning xpcs
   requires its status to be polled. There is no need to also set the
   phylink_config.pcs_poll. Remove this.

6) Switch to phylink_generic_validate(). This is probably the most
   contravertial change in this patch set as this will cause the MAC to
   restrict link modes based on the interface mode. From an inspection
   of the xpcs driver, this should be safe, as XPCS only further
   restricts the link modes to a subset of these (whether that is
   correct or not is not an issue I am addressing here.) For
   implementations that do not use xpcs, this is a more open question
   and needs feedback from stmmac maintainers.

7) Convert to use mac_select_pcs() rather than phylink_set_pcs() to set
   the PCS - the intention is to eventually remove phylink_set_pcs()
   once there are no more users of this.

v2: fix signoff and temporary warning in patch 4
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert stmmac to use the mac_select_pcs() interface rather than using
phylink_set_pcs(). The intention here is to unify the approach for PCS
and eventually to remove phylink_set_pcs().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert stmmac to use phylink_generic_validate() now that we have the
MAC capabilities and supported interfaces filled in, and we have the
PCS validation handled via the PCS operations.
Tested-by: Wong Vee Khee &lt;vee.khee.wong@linux.intel.com&gt; # Intel EHL            Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phylink will use PCS polling whenever the PCS's poll member is set, so
setting phylink_config.pcs_poll as well is redundant.
Tested-by: Wong Vee Khee &lt;vee.khee.wong@linux.intel.com&gt; # Intel EHL            Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac explicitly calls the xpcs driver to validate the ethtool
linkmodes. This is no longer necessary as phylink now supports
validation through a PCS method. Convert both drivers to use this
new mechanism.

Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fill in phylink's supported_interfaces bitmap with the PHY interface
modes which can be used to talk to the PHY.

We indicate that the PHY interface mode passed in platform data is
always supported, as this is the initial mode passed into phylink.
When there is no PCS specified, we assume that this is the only mode
that is supported - indeed, the driver appears not to support dynamic
switching of interface types at present.

When a xpcs is present, it defines the PHY interface modes that the
stmmac driver can support. Request the supported interfaces from the
xpcs driver, and pass them to phylink.
Tested-by: Wong Vee Khee &lt;vee.khee.wong@linux.intel.com&gt; # Intel EHL            Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the MAC speed, duplex and pause capabilities to the phylink_config
structure, and switch stmmac_validate() to use phylink_get_linkmodes()
to generate the mask of supported ethtool link modes.
Tested-by: Wong Vee Khee &lt;vee.khee.wong@linux.intel.com&gt; # Intel EHL            Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a function to the xpcs driver to retrieve the supported PHY
interface modes, which can be used by drivers to fill in phylink's
supported_interfaces mask.

We validate the interface bit index to ensure that it fits within the
bitmap as xpcs lists PHY_INTERFACE_MODE_MAX in an entry.
Tested-by: Wong Vee Khee &lt;vee.khee.wong@linux.intel.com&gt; # Intel EHL            Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Add RJ45 ports support

We are in the process of qualifying a new system that has RJ45 ports as
opposed to the transceiver modules (e.g., SFP, QSFP) present on all
existing systems.

This patchset adds support for these ports in mlxsw by adding a couple of
missing BaseT link modes and rejecting ethtool operations that are
specific to transceiver modules.

Patchset overview:

Patches #1-#3 are cleanups and preparations.

Patch #4 adds support for two new link modes.

Patches #5-#6 query and cache the port module's type (e.g., QSFP, RJ45)
during initialization.

Patches #7-#9 forbid ethtool operations that are invalid on RJ45 ports.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Transceiver module reset through 'rst' field in PMAOS register is not
supported on RJ45 ports, so module reset should be rejected.

Therefore, before trying to access this field, validate the port module
type that was queried during initialization and return an error to user
space in case the port module type is RJ45 (twisted pair).

Output example:

 # ethtool --reset swp11 phy
 ETHTOOL_RESET 0x40
 Cannot issue ETHTOOL_RESET: Invalid argument
 $ dmesg
 mlxsw_spectrum 0000:03:00.0 swp11: Reset module is not supported on port module type
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PMMP (Port Module Memory Map Properties) and MCION (Management Cable IO
and Notifications) registers are not supported on RJ45 ports, so setting
and getting power mode should be rejected.

Therefore, before trying to access those registers, validate the port
module type that was queried during initialization and return an error
to user space in case the port module type is RJ45 (twisted pair).

Set output example:

 # ethtool --set-module swp1 power-mode-policy auto
 netlink error: mlxsw_core: Power mode is not supported on port module type
 netlink error: Invalid argument

Get output example:

 $ ethtool --show-module swp11
 netlink error: mlxsw_core: Power mode is not supported on port module type
 netlink error: Invalid argument
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MCIA (Management Cable Info Access) register is not supported on RJ45
ports, so getting module EEPROM should be rejected.

Therefore, before trying to access this register, validate the port
module type that was queried during initialization and return an error
to user space in case the port module type is RJ45 (twisted pair).

Examples for output when trying to get EEPROM module:

Using netlink:

 # ethtool -m swp1
 netlink error: mlxsw_core: EEPROM is not equipped on port module type
 netlink error: Invalid argument

Using IOCTL:

 # ethtool -m swp1
 Cannot get module EEPROM information: Invalid argument
 $ dmesg
 mlxsw_spectrum 0000:03:00.0 swp1: EEPROM is not equipped on port module type
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Query and store port module's type during initialization so that it
could be later used to determine if certain configurations are allowed
based on the type.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the Port Module Type Mapping (PMTP) register. It will be used by
subsequent patches to query port module types and forbid certain
configurations based on the port module's type.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As part of a process for supporting a new system with RJ45 connectors,
100BaseT and 1000BaseT link modes need to be supported.

Add support for these two link modes by adding the two corresponding
bits in PTYS (Port Type and Speed) register.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The next patches will forbid querying the port module's EEPROM info when
its type is RJ45 as in this case no transceiver module can ever be
connected to the port.

Add netdev argument to mlxsw_env_get_module_info() so it could be used
to print an error to the kernel log via netdev_err().
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The number of modules can be resolved from the first argument, so do not
pass it.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the 'err' variable and simply return.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sk_gso_max_size is set based on the dst dev. Both users of it
adjust the value by the same offset - (MAX_TCP_HEADER + 1). Rather
than compute the same adjusted value on each call do the adjustment
once when set.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220125024511.27480-1-dsahern@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Variable new_csr6 is being initialized with a value that is never
read, it is being re-assigned later on. The assignment is redundant
and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220123183440.112495-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IPv6 GRO considers packets to belong to different flows when their
hop_limit is different. This seems counter-intuitive, the flow is
the same. hop_limit may vary because of various bugs or hacks but
that doesn't mean it's okay for GRO to reorder packets.

Practical impact of this problem on overall TCP performance
is unclear, but TCP itself detects this reordering and bumps
TCPSACKReorder resulting in user complaints.

Eric warns that there may be performance regressions in setups
which do packet spraying across links with similar RTT but different
hop count. To be safe let's target -next and not treat this
as a fix. If the packet spraying is using flow label there should
be no difference in behavior as flow label is checked first.

Note that the code plays an easy to miss trick by upcasting next_hdr
to a u16 pointer and compares next_hdr and hop_limit in one go.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.

Also, address the following sparse warnings:
drivers/net/ethernet/microsoft/mana/gdma_main.c:677:24: warning: using sizeof on a flexible structure

Link: https://github.com/KSPP/linux/issues/174Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is based on series [0] that extended the PM core. Now the compiler
can see the PM callbacks also on systems not defining CONFIG_PM.
The optimizer will remove the functions then in this case.

[0] https://lore.kernel.org/netdev/20211207002102.26414-1-paul@crapouillou.net/Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tobias Waldekranz says:

====================
net: dsa: Avoid cross-chip syncing of VLAN filtering

This bug has been latent in the source for quite some time, I suspect
due to the homogeneity of both typical configurations and hardware.

On singlechip systems, this would never be triggered. The only reason
I saw it on my multichip system was because not all chips had the same
number of ports, which means that the misdemeanor alien call turned
into a felony array-out-of-bounds access.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Changes to VLAN filtering are not applicable to cross-chip
notifications.

On a system like this:

.-----.   .-----.   .-----.
| sw1 +---+ sw2 +---+ sw3 |
'-1-2-'   '-1-2-'   '-1-2-'

Before this change, upon sw1p1 leaving a bridge, a call to
dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1.

In this scenario:

.---------.   .-----.   .-----.
|   sw1   +---+ sw2 +---+ sw3 |
'-1-2-3-4-'   '-1-2-'   '-1-2-'

When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be
called for sw2 and sw3 with a non-existing port - leading to array
out-of-bounds accesses and crashes on mv88e6xxx.

Fixes: d371b7c9 ("net: dsa: Unset vlan_filtering when ports leave the bridge")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most of dsa_switch_bridge_leave was, in fact, dealing with the syncing
of VLAN filtering for switches on which that is a global
setting. Separate the two phases to prepare for the cross-chip related
bugfix in the following commit.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
netns: speedup netns dismantles

netns are dismantled by a single thread, from cleanup_net()

On hosts with many TCP sockets, and/or many cpus, this thread
is spending too many cpu cycles, and can not keep up with some
workloads.

- Removing 3*num_possible_cpus() sockets per netns, for icmp and tcp protocols.
- Iterating over all TCP sockets to remove stale timewait sockets.

This patch series removes ~50% of cleanup_net() cpu costs on
hosts with 256 cpus. It also reduces per netns memory footprint.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP ipv4 uses per-cpu/per-netns ctl sockets in order to send
RST and some ACK packets (on behalf of TIMEWAIT sockets).

This adds memory and cpu costs, which do not seem needed.
Now typical servers have 256 or more cores, this adds considerable
tax to netns users.

tcp sockets are used from BH context, are not receiving packets,
and do not store any persistent state but the 'struct net' pointer
in order to be able to use IPv4 output functions.

Note that I attempted a related change in the past, that had
to be hot-fixed in commit bdbbb852 ("ipv4: tcp: get rid of ugly unicast_sock")

This patch could very well surface old bugs, on layers not
taking care of sk->sk_kern_sock properly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Back in linux-2.6.25 (commit 98c6d1b2 "[NETNS]: Make icmpv6_sk per namespace.",
we added private per-cpu/per-netns ipv6 icmp sockets.

This adds memory and cpu costs, which do not seem needed.
Now typical servers have 256 or more cores, this adds considerable
tax to netns users.

icmp sockets are used from BH context, are not receiving packets,
and do not store any persistent state but the 'struct net' pointer.

icmpv6_xmit_lock() already makes sure to lock the chosen per-cpu
socket.

This patch has a considerable impact on the number of netns
that the worker thread in cleanup_net() can dismantle per second,
because ip6mr_sk_done() is no longer called, meaning we no longer
acquire the rtnl mutex, competing with other threads adding new netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Back in linux-2.6.25 (commit 4a6ad7a1 "[NETNS]: Make icmp_sk per namespace."),
we added private per-cpu/per-netns ipv4 icmp sockets.

This adds memory and cpu costs, which do not seem needed.
Now typical servers have 256 or more cores, this adds considerable
tax to netns users.

icmp sockets are used from BH context, are not receiving packets,
and do not store any persistent state but the 'struct net' pointer.

icmp_xmit_lock() already makes sure to lock the chosen per-cpu
socket.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior patches in the series made sure tw_timer_handler()
can be fired after netns has been dismantled/freed.

We no longer have to scan a potentially big TCP ehash
table at netns dismantle.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We will soon get rid of inet_twsk_purge().

This means that tw_timer_handler() might fire after
a netns has been dismantled/freed.

Instead of adding a function (and data structure) to find a netns
from tw->tw_net_cookie, just update the SNMP counters
a bit earlier, when the netns is known to be alive.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We want to allow inet_twsk_kill() working even if netns
has been dismantled/freed, to get rid of inet_twsk_purge().

This patch adds tw->tw_bslot to cache the bind bucket slot
so that inet_twsk_kill() no longer needs to dereference twsk_net(tw)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: updates for stable FW recovery

Recent FW work has tightened up timings in its error recovery
handling and uncovered weaknesses in the driver's responses,
so this is a set of updates primarily for better handling of
the firmware's recovery mechanisms.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This (ab)use of a data buffer made some static code checkers
rather itchy, so we replace the a generic data buffer with
the union in the struct ionic_vf_setattr_cmd.

Fixes: fbb39807 ("ionic: support sr-iov operations")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver can be premature in detecting stalled firmware
when the heartbeat is not updated because the firmware can
occasionally take a long time (more than 2 seconds) to service
a request, and doesn't update the heartbeat during that time.

The firmware heartbeat is not necessarily a steady 1 second
periodic beat, but better described as something that should
progress at least once in every DECVMD_TIMEOUT period.
The single-threaded design in the FW means that if a devcmd
or adminq request launches a large internal job, it is stuck
waiting for that job to finish before it can get back to
updating the heartbeat.  Since all requests are "guaranteed"
to finish within the DEVCMD_TIMEOUT period, the driver needs
to less aggressive in checking the heartbeat progress.

We change our current 2 second window to something bigger than
DEVCMD_TIMEOUT which should take care of most of the issue.
We stop checking for the heartbeat while waiting for a request,
as long as we're still watching for the FW status.  Lastly,
we make sure our FW status is up to date before running a
devcmd request.

Once we do this, we need to not check the heartbeat on DEV
commands because it may be stalled while we're on the fw_down
path.  Instead, we can rely on the is_fw_running check.

Fixes: b2b9a8d7 ("ionic: avoid races in ionic_heartbeat_check")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dbid_inuse bitmap is not useful in this driver so remove it.

Fixes: 6461b446 ("ionic: Add interrupts and doorbells")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the driver is going through reset, it will eventually call
ionic_lif_init(), which does a lot of re-initialization. One
of the re-initialization steps is to setup the adminq and
enable napi for it.  If something breaks after this point
we can end up with a kernel NULL pointer dereference through
ionic_adminq_napi.

Fix this by making sure to call napi_disable() in the cleanup
path of ionic_lif_init().  This forces any pending napi contexts
to finish and prevents them from being recalled before deleting
the napi context.

Fixes: 77ceb68e ("ionic: Add notifyq support")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Buffer DMA mapping happens in ionic_tx_map_skb() and this function is
called from ionic_tx() and ionic_tx_tso(). If ionic_tx_map_skb()
succeeds, but a failure is encountered later in ionic_tx() or
ionic_tx_tso() we aren't unmapping the buffers. This can be fixed in
ionic_tx() by changing functions it calls to return void because they
always return 0. For ionic_tx_tso(), there's an actual possibility that
we leave the buffers mapped, so fix this by introducing the helper
function ionic_tx_desc_unmap_bufs(). This function is also re-used
in ionic_tx_clean().

Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>