- 14 Sep, 2022 5 commits
-
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220914133355.3779364-2-yangyingliang@huawei.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Yang Yingliang authored
dev_err/dev_dbg() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by:
-
Liang He authored
In eukrea_tlv320_probe(), we need to hold the reference returned from of_find_compatible_node() which has increased the refcount and then call of_node_put() with it when done. Fixes: 66f23290 ("ASoC: eukrea-tlv320: Add DT support.") Co-authored-by:
Kelin Wang <wangkelin2023@163.com> Signed-off-by:
Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220914134354.3995587-1-windhl@126.comSigned-off-by:
-
Judy Hsiao authored
Use regmap_read_poll_timeout to poll I2S_CLR. It also fixes the 'rockchip-i2s ff070000.i2s; fail to clear' when the read of I2S_CLR exceeds the retry limit. Fixes: 0ff9f8b9 ("ASoC: rockchip: i2s: Fix error code when fail to read I2S_CLR") Signed-off-by:
Judy Hsiao <judyhsiao@chromium.org> Reviewed-by:
Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20220914031234.2250298-1-judyhsiao@chromium.orgSigned-off-by:
-
Fabio Estevam authored
Since commit 2848d34c ("ASoC: tas2562: Fix mute/unmute") the following build warning is seen: sound/soc/codecs/tas2562.c:442:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Fix the warning by returning the 'ret' variable. Fixes: 2848d34c ("ASoC: tas2562: Fix mute/unmute") Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220913231706.516849-1-festevam@gmail.comSigned-off-by:
-
- 13 Sep, 2022 8 commits
-
-
David Lin authored
Add a property to control the driving of ADCOUT. Signed-off-by:
David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20220913120641.792502-2-CTLIN0@nuvoton.comSigned-off-by:
-
David Lin authored
Add a property to control the driving of ADCOUT. Signed-off-by:
-
Gaosheng Cui authored
In configurations with CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=n, gcc warns about an unused variable: sound/soc/intel/skylake/skl.c: In function ‘probe_codec’: sound/soc/intel/skylake/skl.c:729:18: error: unused variable ‘skl’ [-Werror=unused-variable] struct skl_dev *skl = bus_to_skl(bus); ^~~ cc1: all warnings being treated as errors Fixes: 3fd63658 ("ASoC: Intel: Drop hdac_ext usage for codec device creation") Signed-off-by:Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220822035133.2147381-1-cuigaosheng1@huawei.comSigned-off-by:
-
Mikhail Rudenko authored
In the case when a codec device is probed before codec analog controls, snd_soc_register_card() returns -EPROBE_DEFER, resulting in a misleading error message sun4i-codec 1c22c00.codec: Failed to register our card even if the device is probed successfully later. Use dev_err_probe() to demote the above error to a debug message. Signed-off-by:Mikhail Rudenko <mike.rudenko@gmail.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220911145713.55199-1-mike.rudenko@gmail.comSigned-off-by:
-
Krzysztof Kozlowski authored
qcom,q6afe is already documented in soc/qcom/qcom,apr.yaml. The version-based compatibles ("qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>") are not used (neither in upstream nor in downstream DTS). Signed-off-by:Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220910090856.49271-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Mark Brown authored
This reverts commit b3821f78 ("arm64: dts: mediatek: kukui: Remove i2s-share properties") which was mistakenly applied to the ASoC tree. Signed-off-by:
-
Shengjiu Wang authored
This patch fixup this warning when CONFIG_PM not defined linux/sound/soc/codecs/ak4458.c:631:13: error: 'ak4458_reset' defined but\ not used [-Werror=unused-function] 631 | static void ak4458_reset(struct ak4458_priv *ak4458, bool active) | ^~~~~~~~~~~~ cc1: all warnings being treated as errors Fixes: e9e7df88 ("ASoC: ak4458: Remove component probe() and remove()") Reported-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1663057594-29141-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Mark Brown authored
Linux 6.0-rc4 so we can test on BeagleBone again.
-
- 09 Sep, 2022 20 commits
-
-
Mark Brown authored
Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>: The i2s ports on MediaTek SoCs only support a single data lane. In order to achieve full-duplex operation thus two i2s ports, one for input and one for output, need to be used together and sharing a single clock from one of the ports. This clock sharing setting was previously read by the sound platform driver from the devicetree, but given that the input/output pairing is closely related to which codecs are connected to which ports, the machine sound driver can infer and set it, so that no DT property is required. At this point only mt8183-kukui was using the DT property, but given that this property was never documented, and that the API introduced in this series makes it obsolete, the undocumented DT property can safely be removed. This series adds a function to allow setting the i2s shared clocks, makes use of it in the machine drivers as required, and removes the no longer required DT properties and support for them in the drivers, for all of mt8192, mt8183 and mt8186. Nícolas F. R. A. Prado (10): ASoC: mediatek: mt8192: Allow setting shared clocks from machine driver ASoC: mediatek: mt8192-mt6359: Make i2s9 share the clock from i2s8 ASoC: mediatek: mt8192: Remove clock share parsing from DT ASoC: mediatek: mt8183: Allow setting shared clocks from machine driver ASoC: mediatek: mt8183: Configure shared clocks ASoC: mediatek: mt8183: Remove clock share parsing from DT arm64: dts: mediatek: kukui: Remove i2s-share properties ASoC: mediatek: mt8186: Allow setting shared clocks from machine driver ASoC: mediatek: mt8186: Configure shared clocks ASoC: mediatek: mt8186: Remove clock share parsing from DT .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 5 -- sound/soc/mediatek/mt8183/mt8183-afe-common.h | 3 ++ .../mediatek/mt8183/mt8183-da7219-max98357.c | 33 +++++++++++++ sound/soc/mediatek/mt8183/mt8183-dai-i2s.c | 45 ++++++++--------- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 33 +++++++++++++ sound/soc/mediatek/mt8186/mt8186-afe-common.h | 3 ++ sound/soc/mediatek/mt8186/mt8186-dai-i2s.c | 44 ++++++++--------- .../mt8186/mt8186-mt6366-da7219-max98357.c | 18 +++++++ .../mt8186/mt8186-mt6366-rt1019-rt5682s.c | 18 +++++++ sound/soc/mediatek/mt8192/mt8192-afe-common.h | 3 ++ sound/soc/mediatek/mt8192/mt8192-dai-i2s.c | 49 ++++++++----------- .../mt8192/mt8192-mt6359-rt1015-rt5682.c | 9 ++++ 12 files changed, 180 insertions(+), 83 deletions(-) -- 2.37.3 -
Shengjiu Wang authored
If the initialization is not finished, then filling input data to the FIFO may fail. So it is better to add initialization finishing check in the runtime resume for suspend & resume case. And consider the case of three instances working in parallel, increase the retry times to 50 for more initialization time. Signed-off-by:
Nicolin Chen <nicolinc@gmail.com> Link: https://lore.kernel.org/r/1662695098-24602-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Kuninori Morimoto authored
hdmi-codec.c is using kzalloc(), but we can replace it to devm_kzalloc() and then, we can remove .remove callback. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/874jxhmjgw.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Nícolas F. R. A. Prado authored
Now that the clock sharing for i2s ports can be configured from the sound machine driver, remove the logic that was used to parse the properties from the devicetree. Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220908161154.648557-11-nfraprado@collabora.comSigned-off-by:
-
Nícolas F. R. A. Prado authored
i2s0 and i2s1 are paired input/output connected to the same codec and should share the same clock. Likewise for i2s2 and i2s3. Set the clock sharing for each pair during the codec's initialization. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Add a new function to configure the shared clock between two i2s ports, and export it. This will allow the clock sharing to be set from the machine driver instead of the devicetree. Signed-off-by:
-
Nícolas F. R. A. Prado authored
The i2sN-share properties were never documented in the dt-binding and thus shouldn't be used. Now that the ASoC machine drivers are setting the I2S clock sharing internally, these properties are no longer needed, so remove them. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Now that the clock sharing for i2s ports can be configured from the sound machine driver, remove the logic that was used to parse the properties from the devicetree. Signed-off-by:
-
Nícolas F. R. A. Prado authored
i2s0 and i2s5 are paired input/output connected to the same codec and should share the same clock. Likewise for i2s2 and i2s3. Set the clock sharing for each pair during the DAI initialization. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Add a new function to configure the shared clock between two i2s ports, and export it. This will allow the clock sharing to be set from the machine driver instead of the devicetree. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Now that the clock sharing for i2s ports can be configured from the sound machine driver, remove the logic that was used to parse the properties from the devicetree. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Both i2s8 and i2s9 are connected to the rt5682 codec and should share the same clock to work in a full-duplex manner. Set the clock sharing during the initialization for rt5682. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Add a new function to configure the shared clock between two i2s ports, and export it. This will allow the clock sharing to be set from the machine driver instead of the devicetree. Signed-off-by:
-
Peter Ujfalusi authored
Set the mtrace type for platforms supported by IPC4. Note: currently only SOF_IPC4_MTRACE_INTEL_CAVS_2 type is supported by the ipc4-mtrace driver, which is used by CAVS 2.x platforms (ICL, TGL, ADL) and ACE (MTL). Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220909114332.31393-8-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Peter Ujfalusi authored
Add implementation of low level, platform dependent IPC4 message handling and set the DSP ops for IPC4 for ICL platform. Suggested-by:
-
Peter Ujfalusi authored
One of the debugging/logging features for an IPC4 based firmware is the use of the debug window to deliver log messages to host via the shared SRAM. The initial implementation of the mtrace supports only TGL/MTL style of logging, but can be extended to support other types, like APL, SKL, CNL, etc. The window is split into 16 'slots' where the first slot contains the descriptors for the remaining 15 slots. Each DSP core logs to a separate slot and the slot allocation is not fixed, we can not assume that the first slot is always used by core0 for example. The firmware sends LOG_BUFFER_STATUS message when new log batch is available from one of the cores (after it updated the write_ptr in the given slot). Host should update the read_ptr in the same slot when it has taken out log data. The patch also updates the sof_ipc4_fw_data struct with parameters needed for the mtrace to be enabled and used safely. Co-developed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Peter Ujfalusi authored
The debug window for IPC4 compatible firmware is always window #2, set the debug_box.offset accordingly. Signed-off-by:
-
Peter Ujfalusi authored
Instead of using the index number directly, add a define for the outbox window index. It is always window 1 with IPC4. Signed-off-by:
-
Peter Ujfalusi authored
The LOG_BUFFER_STATUS message includes the ID of the core which updated its log buffer. With IPC4 each core logs to a different slot in the debug window. Signed-off-by:
-
Peter Ujfalusi authored
Do not print messages when the SOF_DBG_PRINT_DMA_POSITION_UPDATE_LOGS flag is not set to reduce the amount of prints when the tracing is used. Signed-off-by:
-
- 08 Sep, 2022 6 commits
-
-
Mark Brown authored
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: These are remains of my previous cleanup patch-set.
-
Shengjiu Wang authored
Most function in ak4458_probe() and ak4458_remove() are duplicate with dai ops, so remove them and move dsd_path setting to dai ops. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/1662622316-23426-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
ye xingchen authored
Return the value regmap_write() and sti_sas_init_sas_registers() directly instead of storing it in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/20220908010304.342760-1-ye.xingchen@zte.com.cnSigned-off-by:
-
Steve Lee authored
The Amp is already control in userspace before trigger calibrate function. Remove unnecessary control in calibrate function and add condition to check calibration is ready. Signed-off-by:
Steve Lee <steve.lee.analog@gmail.com> Link: https://lore.kernel.org/r/20220908060359.13606-1-steve.lee.analog@gmail.comSigned-off-by:
-
Kuninori Morimoto authored
snd_soc_dai_link_event_pre_pmu() is using if/else for config->formats check, but "else" case is for just error. Unnecessary if/else is not good for readable code. this patch checks if config->formats was zero as error case. Moreover, we don't need to indicate config->formats value in error message, because it is zero. This patch tidyup it, too. => if (config->formats) { ... } else { dev_warn(w->dapm->dev, "ASoC: Invalid format %llx specified\n", => config->formats); ... } Link: https://lore.kernel.org/all/YxiDkDOwRsbXeZ17@sirena.org.uk/Signed-off-by: -
Kuninori Morimoto authored
snd_soc_dai_link_event_pre_pmu() is using kzalloc()/kfree() for params. It looks we don't need to use these, but are necessary. But, it is difficult to know why it is necessary without any comments. This patch adds the reasons via comment. Link: https://lore.kernel.org/all/Yxc2wzbZsSVZNf8Y@sirena.org.uk/Signed-off-by:
-
- 07 Sep, 2022 1 commit
-
-
Mark Brown authored
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>: This series fixes Sound Open Firmware support for MT8195 by making sure that the sound card driver is actually able to probe and IPC can finally happen. It is now possible to get DSP support for audio. Tested on MT8195 Tomato - Acer Chromebook Spin 513 CP513-2H (Pipewire).
-
