This patch adds a structure which will be used by 64bit-resize interface.
Two functions which allocate and destroy the structure respectively are
added.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

This patch adds a function named ext4_add_new_descs() which adds one
or more new group descriptors to a fs and whose code is copied from
ext4_group_add().

The function will be used by new resize implementation.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

This patch added a function named ext4_group_extend_no_check() whose code
is copied from ext4_group_extend().  ext4_group_extend_no_check() assumes
the parameter is valid and has been checked by caller.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
ext4.  Only two ext4_{set,clear}_bit() calls check the return value.  The
rest of calls ignore the return value and they can be replaced with
__{set,clear}_bit_le().

This changes ext4_{set,clear}_bit() from __test_and_{set,clear}_bit_le()
to __{set,clear}_bit_le() and introduces ext4_test_and_{set,clear}_bit()
for the two places where old bit needs to be returned.

This ext4_{set,clear}_bit() change is considered safe, because if someone
uses these macros without noticing the change, new ext4_{set,clear}_bit
don't have return value and causes compiler errors where the return value
is used.

This also removes unused ext4_find_first_zero_bit().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The functions ext4_block_truncate_page() and ext4_block_zero_page_range()
are no longer used, so remove them.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Fix ext4_debug format in ext4_ext_handle_uninitialized_extents() and
ext4_end_io_dio().
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Currently, we clear revoked flag only when a block is reused.  However,
this can tigger a false journal error.  Consider a situation when a block
is used as a meta block and is deleted(revoked) in ordered mode, then the
block is allocated as a data block to a file.  At this moment, user changes
the file's journal mode from ordered to journaled and truncates the file.
The block will be considered re-revoked by journal because it has revoked
flag still pending from the last transaction and an assertion triggers.

We fix the problem by keeping the revoked status more uptodate - we clear
revoked flag when switching revoke tables to reflect there is no revoked
buffers in current transaction any more.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

It's necessary to flush the journal when switching away from
data=journal mode.  This is because there are no revoke records when
data blocks are journalled, but revoke records are required in the
other journal modes.

However, it is not necessary to flush the journal when switching into
data=journal mode, and flushing the journal is expensive.  So let's
avoid it in that case.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

delalloc blocks should be allocated before changing journal mode,
otherwise they can not be allocated and even more truncate on
delalloc blocks could triggre BUG by flushing delalloc buffers.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

In the code to support EXT4_IOC_MOVE_EXT, ext4_ioctl calls
file_remove_suid() after the call to ext4_move_extents() if any
extents has been moved.  There are at least three things wrong with
this.  First, file_remove_suid() should be called with i_mutex down,
which is not here.  Second, it should be called before the donor file
has been modified, to avoid a potential race condition.  Third, and
most importantly, it's pointless, because ext4_file_extents() already
checks if the donor file has the setuid or setgid bit set, and will
return an error in that case.  So the first two objections don't
really matter, since file_remove_suid() will never need to modify the
inode in any case.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

We found performance regression when using bigalloc with "nodelalloc"
(1MB cluster size):

1. mke2fs -C 1048576 -O ^has_journal,bigalloc /dev/sda
2. mount -o nodelalloc /dev/sda /test/
3. time dd if=/dev/zero of=/test/io bs=1048576 count=1024

The "dd" will cost about 2 seconds to finish, but if we mke2fs without
"bigalloc", "dd" will only cost less than 1 second.

The reason is: when using ext4 with "nodelalloc", it will call
ext4_find_delalloc_cluster() nearly everytime it call
ext4_ext_map_blocks(), and ext4_find_delalloc_range() will also scan
all pages in cluster because no buffer is "delayed".  A cluster has
256 pages (1MB cluster), so it will scan 256 * 256k pags when creating
a 1G file. That severely hurts the performance.

Therefore, we return immediately from ext4_find_delalloc_range() in
nodelalloc mode, since by definition there can't be any delalloc
pages.
Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

In get_implied_cluster_alloc(), rr_cluster_end was being
defined and set, but was never used.  Removed this.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

When insert_inode_locked() fails in ext4_new_inode() it most likely means inode
bitmap got corrupted and we allocated again inode which is already in use. Also
doing unlock_new_inode() during error recovery is wrong since the inode does
not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:)
which declares filesystem error and does not call unlock_new_inode().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

pa_inode in group_pa is set NULL in ext4_mb_new_group_pa, so
pa_inode should be not referenced.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

This reverts commit eb1711bb.

It blows up the i915 seqno tracking, resulting in the

	BUG_ON(seqno == 0);

in i915_wait_request() triggering, which will cause lock-ups.

See for example
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/903010
  https://lkml.org/lkml/2011/12/14/395Reported-requested-and-tested-by: Dirk Hohndel <dirk@hohndel.org>
Reported-by: Richard Eames <Richard.Eames@flinders.edu.au>
Reported-by: Rocko Requin <rockorequin@hotmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Keith Packard <keithp@keithp.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: Be less strict in matching %lo part of relocation.
  sbus: convert drivers/sbus/char/* to use module_platform_driver()
  bbc_i2c: Remove unneeded err variable
  sparc: Use kmemdup rather than duplicating its implementation

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow().
  sch_gred: should not use GFP_KERNEL while holding a spinlock
  ipip, sit: copy parms.name after register_netdevice
  ipv6: Fix for adding multicast route for loopback device automatically.
  ssb: fix init regression with SoCs
  rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition
  mac80211: fix another race in aggregation start
  fsl_pq_mdio: Clean up tbi address configuration
  ppp: fix pptp double release_sock in pptp_bind()
  net/fec: fix the use of pdev->id
  ath9k: fix check for antenna diversity support
  batman-adv: delete global entry in case of roaming
  batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM
  Bluetooth: Correct version check in hci_setup
  btusb: fix a memory leak in btusb_send_frame()
  Bluetooth: bnep: Fix module reference
  Bluetooth: cmtp: Fix module reference
  Bluetooth: btmrvl: support Marvell Bluetooth device SD8797

Merge branches 'for-linus' and 'for-linus-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: unplug every once and a while
  Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code
  Btrfs: only set cache_generation if we setup the block group
  Btrfs: don't panic if orphan item already exists
  Btrfs: fix leaked space in truncate
  Btrfs: fix how we do delalloc reservations and how we free reservations on error
  Btrfs: deal with enospc from dirtying inodes properly
  Btrfs: fix num_workers_starting bug and other bugs in async thread
  BTRFS: Establish i_ops before calling d_instantiate
  Btrfs: add a cond_resched() into the worker loop
  Btrfs: fix ctime update of on-disk inode
  btrfs: keep orphans for subvolume deletion
  Btrfs: fix inaccurate available space on raid0 profile
  Btrfs: fix wrong disk space information of the files
  Btrfs: fix wrong i_size when truncating a file to a larger size
  Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror

* 'for-linus-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: lower the dirty balance poll interval

* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux:
  drm/i915/dp: Dither down to 6bpc if it makes the mode fit
  drm/i915: enable semaphores on per-device defaults
  drm/i915: don't set unpin_work if vblank_get fails
  drm/i915: By default, enable RC6 on IVB and SNB when reasonable
  iommu: Export intel_iommu_enabled to signal when iommu is in use
  drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
  drm/i915: prevent division by zero when asking for chipset power
  drm/i915: add PCH info to i915_capabilities
  drm/i915: set the right SDVO transcoder for CPT
  drm/i915: no-lvds quirk for ASUS AT5NM10T-I
  drm/i915: Treat pre-gen4 backlight duty cycle value consistently
  drm/i915: Hook up Ivybridge eDP
  drm/i915: add multi-threaded forcewake support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: HDA: Use LPIB Position fix for Intel SCH Poulsbo
  ALSA: hda: fix mute led polarity for HP laptops with buggy BIOS
  ALSA: HDA: Set position fix to LPIB for an Atom/Poulsbo based device
  ASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card fails
  ASoC: WM8958: correctly show firmware magic on mismatch
  ASoC: mxs: Add appropriate MODULE_ALIAS()
  ASoC: mxs: Add missing MODULE_LICENSE("GPL")
  ASoC: Fix WM8996 24.576MHz clock operation
  ASoC: Include linux/module.h for smdk2443_wm9710
  ASoC: Fix a typo in jive_wm8750
  ASoC: Fix build dependency for SND_SOC_JZ4740_CODEC
  ASoC: Include linux/io.h for jz4740 codec

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio: Fix DA9052 GPIO build errors.
  gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121
  gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chip
  gpio-ml-ioh: fix a bug in the interrupt handler
  gpio: pl061: drop extra check for NULL platform_data

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP: rx51: fix USB
  ARM: OMAP: mcbsp: Fix possible memory corruption
  arm/imx: fix power button on imx51 babbage board
  ARM: imx: fix cpufreq build errors
  ARM: mx5: add __initconst for fec pdata
  MXC PWM: should active during DOZE/WAIT/DBG mode
  ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS
  ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep
  ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210
  ARM: SAMSUNG: remove duplicated header include

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: don't kick empty queue in blk_drain_queue()
  block/swim3: Locking fixes
  loop: Fix discard_alignment default setting
  cfq-iosched: fix cfq_cic_link() race confition
  cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails
  cciss: fix flush cache transfer length
  cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler
  loop: fix loop block driver discard and encryption comment
  block: initialize request_queue's numa node during

Tests show that the original large intervals can easily make the dirty
limit exceeded on 100 concurrent dd's. So adapt to as large as the
next check point selected by the dirty throttling algorithm.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Some active adaptors (VGA usually) only have two lanes at 2.7GHz.
That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc.

Fixes Asus UX31 panel being black at startup due to no valid modes since
dc22ee6f.

v2: Rebased to current code, resulting in the fix applying to EDP panels as
    well.  Also changed from spatio-temporal to just spatial dithering on
    pre-ironlake, to be conssitent (and less visual flicker)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Eric Anholt <eric@anholt.net>
Tested-by: Dirk Hohndel <hohndel@infradead.org>
Signed-off-by: Keith Packard <keithp@keithp.com>

This adds a default setting for semaphores parameter, and enables
semaphores by default on IVB.

For now, as semaphores interaction with VTd causes random issues on
SNB, we do not enable them by default. But they can still be enabled
via the semaphores=1 kernel parameter.

v2: enables semaphores on SNB when IO remapping is disabled, with base
on Keith Packard patch.

CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: Ben Widawsky <ben@bwidawsk.net>
CC: Keith Packard <keithp@keithp.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42696
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40564
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38862Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

This fixes a race where we may try to finish a page flip and decrement
the refcount even if our vblank_get failed and we ended up with a
spurious flip pending interrupt.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=34211.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>

RC6 should always work on IVB, and should work on SNB whenever IO
remapping is disabled. RC6 never works on Ironlake. Make the default
value for the parameter follow these guidelines. Setting the value
to either 0 or 1 will force the specified behavior.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567
Cc: Ted Phelps <phelps@gnusto.com>
Cc: Peter <pab1612@gmail.com>
Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz>
Cc: Andrew Lutomirski <luto@mit.edu>

In i915 driver, we do not enable either rc6 or semaphores on SNB when dmar
is enabled. The new 'intel_iommu_enabled' variable signals when the
iommu code is in operation.

Cc: Ted Phelps <phelps@gnusto.com>
Cc: Peter <pab1612@gmail.com>
Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz>
Cc: Andrew Lutomirski <luto@mit.edu>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

We were checking whether the supplied edid matched the connector it was
read from. We do this in case a DDC read returns an EDID for another
device on a multifunction or otherwise interesting card. However, we
failed to include LVDS as a digital device and so rejecting an otherwise
valid EDID.

Fixes the detection of the secondary SDVO LVDS panel on the Libretto
W105.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39216Signed-off-by: Keith Packard <keithp@keithp.com>

This prevents an in-kernel division by zero which happens when we are
asking for i915_chipset_val too quickly, or within a race condition
between the power monitoring thread and userspace accesses via debugfs.

The issue can be reproduced easily via the following command:
while ``; do cat /sys/kernel/debug/dri/0/i915_emon_status; done

This is particularly dangerous because it can be triggered by
a non-privileged user by just reading the debugfs entry.

This issue was also found independently by Konstantin Belousov
<kostikbel@gmail.com>, who proposed a similar patch.
Reported-by: Konstantin Belousov <kostikbel@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

v2: add a CPT-specific macro, make code cleaner
v3: fix commit message

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41272
Cc: stable@kernel.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>

https://bugzilla.redhat.com/show_bug.cgi?id=750006Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

Merge branch 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  ibft: Fix finding IBFT ACPI table on UEFI