- 08 May, 2007 40 commits
-
-
Antonino A. Daplas authored
Since hecubafb's framebuffer is vmalloc'ed, use fb_sys_read(). Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Antonino A. Daplas authored
Since arcfb's framebuffer is vmalloc'ed, use the fb_sys_read(). Signed-off-by:
-
Antonino A. Daplas authored
The functions fb_read() and fb_write in fbmem.c assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using __raw_read/__raw_write (fb_readl/fb_writel) for these drivers is illegal, especially in other platforms. Create file read and write methods for these types of drivers. These are named fb_sys_read() and fb_sys_write(). Signed-off-by:
-
Antonino A. Daplas authored
It is unnecessary to pass struct file to fb_read() and fb_write() in struct fb_ops. For consistency with the other methods, pass struct fb_info instead. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Antonino A. Daplas authored
Since vfb's framebuffer is vmalloc'ed, use the sys_* drawing functions instead of cfb_*. Signed-off-by:
-
Antonino A. Daplas authored
Since hecubafb's framebuffer is vmalloc'ed, use the sys_* drawing functions instead of cfb_*. Signed-off-by:
-
Antonino A. Daplas authored
Since arcfb's framebuffer is vmalloc'ed, use the sys_* drawing functions instead of cfb_*. Signed-off-by:
-
Antonino A. Daplas authored
The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using _raw_read/write and family for these drivers (as used in the cfb* functions) is illegal, especially in other platforms. Create 3 new drawing functions, based almost entirely from the original except that the framebuffer memory is assumed to be in system RAM. These are named as sysimgblt, syscopyarea, and sysfillrect. Signed-off-by:
-
Antonino A. Daplas authored
Documentation error fixes. Signed-off-by:
-
Antonino A. Daplas authored
Add description to Documentation/kernel-parameters.txt on new options default_blue, default_grn, default_red, and default_utf8. Signed-off-by:
-
Antonino A. Daplas authored
Fix a long-standing bug. The mask used to detect a 100Mhz or 133Mhz chipset is incorrect. (The only side effect of this bug is that it will choose an incorrect watermark). Signed-off-by:
-
Antonino A. Daplas authored
The framebuffer memory is allocated from system RAM (vmalloc'ed). Add __force annotations. Signed-off-by:
-
Antonino A. Daplas authored
Add sparse annotations and use fb_read/fb_write and family to access the framebuffer. Signed-off-by:
-
Antonino A. Daplas authored
The framebuffer memory is allocated from system RAM (vmalloc'ed). Add __force annotations. Signed-off-by:
-
Antonino A. Daplas authored
Add sparse annotations and use fb_read/fb_write family to access the framebuffer. Signed-off-by:
-
Antonino A. Daplas authored
Kill the following in fb_defio.c: drivers/video/fb_defio.c:40:43: warning: incorrect type in argument 1 (different address spaces) drivers/video/fb_defio.c:40:43: expected void *addr drivers/video/fb_defio.c:40:43: got char [noderef] *screen_base<asn:2> The framebuffer memory of these types of devices are allocated from system RAM. Signed-off-by:
-
Antonino A. Daplas authored
Fix IO access, with the following sparse warnings: drivers/video/riva/fbdev.c:320:25: warning: dereference of noderef expression drivers/video/riva/fbdev.c:321:29: warning: dereference of noderef expression drivers/video/riva/fbdev.c:327:18: warning: dereference of noderef expression drivers/video/riva/fbdev.c:328:15: warning: dereference of noderef expression Signed-off-by:
-
Antonino A. Daplas authored
Fix the following sparse warning: drivers/video/nvidia/nv_setup.c:659:20: warning: dereference of noderef expression Signed-off-by:
-
Antonino A. Daplas authored
If the current framebuffer console is rotated (rotate != 0), doing an "fbset -a" will corrupt the current console. Fix by updating the current console only after all non-visible consoles have been updated. Signed-off-by:
-
Antonino A. Daplas authored
Instead of directly linking vgastate.o by individual drivers, create a Kconfig option VGASTATE which can be 'SELECT'ed by individual drivers instead. Signed-off-by:
-
Antonino A. Daplas authored
Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the VGA registers are linearly mapped to the MMIO space, MMIO access is used which is not limited to X86 platforms nor to the primary display device. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by:
-
Antonino A. Daplas authored
Use already defined VGAwCR/VGArCR functions to access the i2c bus. Signed-off-by:
-
Antonino A. Daplas authored
Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the non-linear mapping of the VGA registers to the MMIO space, this will be done only on X86 platforms where the device is the primary display. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by:
-
Roland Stigge authored
Fix error handling code Signed-off-by:
Roland Stigge <stigge@antcom.de> Signed-off-by:
-
Richard Knutsson authored
Convert to generic boolean. Signed-off-by:
Richard Knutsson <ricknu-0@student.ltu.se> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Robert P. J. Day authored
Following the programming advice laid down in the gcc manual, make sure the case "..." operator has spaces on either side. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Krzysztof Helt authored
This is mainly correction of types, typos and missing characters in the skeletonfb.c file found while trying to prepare a new fb driver. [adaplas] Additions on power management and fixes as per akpm Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Antonino A. Daplas authored
Use Read/WriteCrtc() to access CRTC registers in nv_i2c.c. These are safer because it uses the correct CRTC base (0x3bx or 0x3dx). Signed-off-by:
-
Antonino A. Daplas authored
- Ensure that CRTC registers are accessible by unlocking them on set_par(), otherwise i2c reading will fail. - The function nvidia_vga_protect(), does not protect the VGA registers, but turns off the screen. Rename it to nvidia_screen_off(). Signed-off-by:
-
Antonino A. Daplas authored
Fixed reversed DDC port so assignments are congruent with nvidiafb's and X's nv driver. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
Various cleanups to rivafb/nvidiafb's I2C code: * Drop useless par->bus. * Refactor I2C bus deletion code. * Drop useless variable initialization. * Remove unneeded include of <linux/i2c-id.h>. * Simplify +1/-1. * Add __devinit tags where possible. [adaplas] The varible initialization are not useless. However, rivafb must check if i2c bus are created properly before reading the EDID block. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
I2C bus creation may fail, let rivafb handle that case properly. Signed-off-by:
-
Jean Delvare authored
Let the hardware monitoring drivers probe the second rivafb/nvidiafb I2C bus for devices. Signed-off-by:
Jean Delvare <khali@linux-fr> Signed-off-by:
-
Antonino A. Daplas authored
It was always intended for the logo to be drawn only if both fbcon and the driver that is mapped to it are both compiled statically. Currently, if fbcon is loaded prior to the driver, the logo is not shown. Reverse the order, and the code may attempt to draw the logo which is __initdata. By accident, this bug is rarely seen because this method of loading the modules is not common and secondly, a code in fb_prepare_logo() that checks the height of the logo (now a random value) rarely succeeds. Fix by drawing the logo only if both fbcon and the driver are statically compiled. Signed-off-by:
-
Randy Dunlap authored
drivers/video/s3fb.c:1078: warning: ignoring return value of 'pci_enable_device', declared with attribute warn_unused_result Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
Create a variable, default_utf8, that defines the system-wide default UTF-8 setting. This variable can be altered via sysfs. If the variable is properly set, this should mimimize breakage of UTF-8 encoded consoles when doing a reset or echo -e '\033c' and of newly opened/allocated consoles. This is based from patches by Jan Engelhardt and Paul LeoNerd Evans. Signed-off-by:
-
Michal Januszewski authored
When the cursor and echo are disabled on the current console, pressing a key will cause a black rectangle to be painted in the cursor's position. Fix this by not touching the framebuffer in fbcon_cursor() when the cursor is off. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
WANG Cong authored
drivers/usb/misc/sisusbvga/sisusb_con.c:1436: warning: initialization from incompatible pointer type Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Andrew Morton authored
Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Jan Engelhardt authored
Add color support to the "underline" and "italic" attributes as in OpenBSD/NetBSD-style (vt220) and xterm. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Acked-by:
-
