- 10 May, 2021 40 commits
-
-
Dennis Li authored
Add shader codes to explicitly clear specific SGPRs, such as flat_scratch_lo, flat_scratch_hi and so on. And also correct the allocation size of SGPRs in PGM_RSRC1. Signed-off-by:
Dennis Li <Dennis.Li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Mukul Joshi authored
Enable TCP channel hashing to match DF hash settings for Aldebaran. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
Joseph Greathouse <Joseph.Greathouse@amd.com> Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Eric Huang authored
In NPS4 BIOS we need to find the closest numa node when creating topology io link between cpu and gpu, if PCI driver doesn't set it. Signed-off-by:
Eric Huang <jinhuieric.huang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Alex Deucher authored
Vangogh follows other APUs, but also allows core clock adjustments. Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Alex Deucher authored
APUs only support adjusting the SCLK domain. Reviewed-by:
-
Evan Quan authored
Available with 68.18.0 and later PMFWs. Signed-off-by:
-
Evan Quan authored
Supported by some latest ASICs. Signed-off-by:
-
Bas Nieuwenhuizen authored
The builtin size check isn't really the right thing for AMD modifiers due to a couple of reasons: 1) In the format structs we don't do set any of the tilesize / blocks etc. to avoid having format arrays per modifier/GPU 2) The pitch on the main plane is pixel_pitch * bytes_per_pixel even for tiled ... 3) The pitch for the DCC planes is really the pixel pitch of the main surface that would be covered by it ... Note that we only handle GFX9+ case but we do this after converting the implicit modifier to an explicit modifier, so on GFX9+ all framebuffers should be checked here. There is a TODO about DCC alignment, but it isn't worse than before and I'd need to dig a bunch into the specifics. Getting this out in a reasonable timeframe to make sure it gets the appropriate testing seemed more important. Finally as I've found that debugging addfb2 failures is a pita I was generous adding explicit error messages to every failure case. Fixes: f258907f ("drm/amdgpu: Verify bo size can fit framebuffer size on init.") Tested-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by:
-
Bas Nieuwenhuizen authored
Otherwise tiling modes that require the values form this field (In particular _*_X) would be corrupted upon video decode. Copied from the VCN v2 code. Fixes: 99541f39 ("drm/amdgpu: add mc resume DPG mode for VCN3.0") Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Alex Deucher authored
Change to 60s. This matches what we already do in virtualization. Infinite timeout can lead to deadlocks in the kernel. Reviewed-by:
Christian König <christian.koenig@amd.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Sathishkumar S authored
enable vcn mgcg flag for picasso. Signed-off-by:
Sathishkumar S <sathishkumar.sundararaju@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Acked-by:
-
Mike Li authored
The L1 cache information has been updated and the L2/L3 information has been added. The changes have been made for Vega10 and newer ASICs. There are no changes for the older ASICs before Vega10. Signed-off-by:
Mike Li <Tianxinmike.Li@amd.com> Signed-off-by:
-
Fabio M. De Francesco authored
drm_modeset_lock_all() is not needed here, so it is replaced with drm_modeset_lock(). The crtc list around which we are looping never changes, therefore the only lock we need is to protect access to crtc->state. Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Suggested-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by:
-
Tom Rix authored
Static analysis reports this problem amdgpu_pm.c:478:16: warning: The right operand of '<' is a garbage value for (i = 0; i < data.nums; i++) { ^ ~~~~~~~~~ In some cases data is not set. Initialize to 0 and flag not setting data as an error with the existing check. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Kees Cook authored
Avoid leaving a hanging pre-allocated clock_info if last mode is invalid, and avoid heap corruption if no valid modes are found. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537 Fixes: 6991b8f2 ("drm/radeon/kms: fix segfault in pm rework") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
An out of bounds write happens when setting the default power state. KASAN sees this as: [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 ================================================================== BUG: KASAN: slab-out-of-bounds in radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157 CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x239 kasan_report+0x170/0x1a8 radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] radeon_atombios_get_power_modes+0x144/0x1888 [radeon] radeon_pm_init+0x1019/0x1904 [radeon] rs690_init+0x76e/0x84a [radeon] radeon_device_init+0x1c1a/0x21e5 [radeon] radeon_driver_load_kms+0xf5/0x30b [radeon] drm_dev_register+0x255/0x4a0 [drm] radeon_pci_probe+0x246/0x2f6 [radeon] pci_device_probe+0x1aa/0x294 really_probe+0x30e/0x850 driver_probe_device+0xe6/0x135 device_driver_attach+0xc1/0xf8 __driver_attach+0x13f/0x146 bus_for_each_dev+0xfa/0x146 bus_add_driver+0x2b3/0x447 driver_register+0x242/0x2c1 do_one_initcall+0x149/0x2fd do_init_module+0x1ae/0x573 load_module+0x4dee/0x5cca __do_sys_finit_module+0xf1/0x140 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Without KASAN, this will manifest later when the kernel attempts to allocate memory that was stomped, since it collides with the inline slab freelist pointer: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 RIP: 0010:kfree+0x115/0x230 Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7 RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246 RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80 RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000 R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100 FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0 Call Trace: __free_fdtable+0x16/0x1f put_files_struct+0x81/0x9b do_exit+0x433/0x94d do_group_exit+0xa6/0xa6 __x64_sys_exit_group+0xf/0xf do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe80ef64bea Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0. RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0 R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0 Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ... Use a valid power_state index when initializing the "flags" and "misc" and "misc2" fields. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537Reported-by:
Erhard F. <erhard_f@mailbox.org> Fixes: a48b9b4e ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)") Fixes: 79daedc9 ("drm/radeon/kms: minor pm cleanups") Signed-off-by:
-
Alex Deucher authored
It's not needed here and has been added to the proper place in the previous patch. This aligns with what we do for sdma 5.2. Reviewed-by:
-
Alex Deucher authored
Add emit mem sync callback for sdma_v5_0 In amdgpu sync object test, three threads created jobs to send GFX IB and SDMA IB in sequence. After the first GFX thread joined, sometimes the third thread will reuse the same physical page to store the SDMA IB. There will be a risk that SDMA will read GFX IB in the previous physical page. So it's better to flush the cache before commit sdma IB. Acked-by:
-
Alex Deucher authored
Switch to gitlab. Fixes: 101c2fae ("MAINTAINERS: update radeon/amdgpu/amdkfd git trees") Cc: David Ward <david.ward@gatech.edu> Reviewed-by:
-
Lijo Lazar authored
Add debugfs interface to read region allocated for FW private buffer Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Suggested-by:
Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
-
Lijo Lazar authored
v1: Add new interface to get FW private buffer details v2: Drop domain check v3: Use amdgpu_bo_kmap to get cpu address Signed-off-by:
-
Jonathan Kim authored
To account for various PCIe and xGMI setups, check the no atomics settings for a device in relation to every direct peer. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
-
Aric Cyr authored
This version brings improvements across DP, eDP, DMUB, DSC, etc Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Wayne Lin <Wayne.Lin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Anthony Koo authored
Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Paul Wu authored
[Why] When hardware need to be reset, driver need to reset stream objects but dc_resource_state_destruct function omit resetting stream_count. It will lead page fault if some logic will touch stream object. [How] Set stream_count to 0 when dc_resource_state_destruct. Signed-off-by:
Paul Wu <paul.wu@amd.com> Reviewed-by:
-
George Shen authored
[Why] Per DP specification, YCbCr420 shall use VSC SDP. [How] For YCbCr420 timings, fail DP mode timing validation if DPCD caps do not indicate VSC SDP colorimetry support. Signed-off-by:
George Shen <george.shen@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Calvin Hou authored
[Why] Sometimes, such as sleep wake, the link->local sink pointer changed, but the dc_stream_state->sink pointer is not changed. The checking of timing_changed reports wrong result, lead to link tear down unexpected wrongly. [How] SST compare local sink, MST compare proper remote link. Signed-off-by:
Calvin Hou <Calvin.Hou@amd.com> Reviewed-by:
-
Dale Zhao authored
[Why] Per DP spec, for active protocol convertor adaptor, DP source should enable audio for DFP type is DP, HDMI or DP++. Current is_dp_active_dongle() checking is not precise, which treat branch device default as active dongle. As a result, we will mistakenly disable audio for DFP type is DP case. [How] Make is_dp_active_dongle() checking more precise for active dongle types. Rename active diongle type as SST branch device in case confusion. Signed-off-by:
Dale Zhao <dale.zhao@amd.com> Reviewed-by:
-
Jude Shih authored
[WHY] To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes. [How] 1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd with DCN and sends reply back in an outbox1 message triggering an outbox1 interrupt to driver. 2) In existing driver implementation, AUX commands are processed synchronously by configuring DCN reg. But in DMUB AUX, driver sends an inbox1 message and waits for a conditional variable (CV) which will be signaled by outbox1 ISR. 3) DM will retrieve Outbox1 message and send back reply to upper layer and complete the AUX command Signed-off-by:
Jude Shih <shenshih@amd.com> Reviewed-by:
Hanghong Ma <Hanghong.Ma@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
Paul Hsieh authored
[Why] The split pipe config is updated due to antoher stream bandwidth validataion. Driver doesn't reprogram the split pipe config to signle pipe cause SW use signel pipe but HW still use pipe split. [How] track global updates and update any hw that isn't related to current stream being updated. Signed-off-by:
Paul Hsieh <paul.hsieh@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Eric Yang authored
[Why & How] Add the field to HW params to allow DM dynamically pass down debug and boot options as needed. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
-
Aric Cyr authored
This reverts commit "dc: treat memory as a single-channel for asymmetric memory". Signed-off-by:
-
Mikita Lipski authored
[why] Currently the assumption is that we are using a single eDP connector so there will only be one backlight object. Need changes to allow brightness update and reading for multiple eDP connectors. [how] - register a single device - turn backlight link from a pointer to an array of pointers - update brightness of all eDP links at the same time when request is registered - read brightness level only of the primary eDP panel - turn current_backlight_pwm and targer_backlight_pwm debugfs enteries into per connector enteries. Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
Wayne Lin <waynelin@amd.com> Tested-by:
-
Stanley.Yang authored
Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Reviewed-by:
-
Nikola Cornij authored
[Why] Similar to SST branch, gpio conflict also needs to be avoided on MST. Without doing so, there is a chance that gpio conflict will occur if multiple gpio interrupts arrive simultaneously. [How] By mutex locking/unlocking &aconnector->hpd_lock, we won't get gpio conflict when handling hpd. Signed-off-by:
Zhan Liu <zhan.liu@amd.com> Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by:
-
Wenjing Liu authored
[why] Based on hardware team recommendation this additional dsc overhead is only required for DP DSC. [how] Add a check for is_dp and only apply the overhead if this flag is set. Signed-off-by:
Chris Park <Chris.Park@amd.com> Acked-by:
-
Roman Li authored
[Why] In gpu reset dc_lock acquired in dm_suspend(). Asynchronously handle_hpd_rx_irq can also be called through amdgpu_dm_irq_suspend->flush_work, which also tries to acquire dc_lock. That causes a deadlock. [How] Check if amdgpu executing reset before acquiring dc_lock. Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Signed-off-by:
Roman Li <Roman.Li@amd.com> Reviewed-by:
Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by:
-
Felix Kuehling authored
This function is only used in this source file. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Nirmoy Das authored
Fix below htmldocs build warning: "warning: Excess function parameter 'vm_context' description in 'amdgpu_vm_init'" Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
Philip Yang authored
To workaround the situation that vm retry fault keep coming after page table update. We are investigating the root cause, but once this issue happens, application will stuck and sometimes have to reboot to recover. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
