- 14 Oct, 2008 40 commits
-
-
Frédéric Weisbecker authored
Now that the nop tracer is used as the default tracer by replacing the "none" tracer, tracing engine depends on it. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Noonan <steven@uplinklabs.net> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Frédéric Weisbecker authored
If nop tracer is selected, some old entries from the previous tracer could still be enqueued. Tracing have to be reset. Signed-off-by:
-
Steven Noonan authored
The functions are already 'extern' anyway, so there's no problem with linkage. Removing these ifdefs also helps find any potential compiler errors. Suggested by Andrew Morton. Signed-off-by:
Steven Noonan <steven@uplinklabs.net> Signed-off-by:
-
Steven Noonan authored
When CONFIG_DYNAMIC_FTRACE isn't used, neither is mcount_addr. This patch eliminates that warning. Signed-off-by:
-
Steven Noonan authored
A no-op tracer which can serve two purposes: 1. A template for development of a new tracer. 2. A convenient way to see ftrace_printk() calls without an irrelevant trace making the output messy. [ mingo@elte.hu: resolved conflicts ] Signed-off-by: -
Pekka Paalanen authored
Allow a user to inject a marker (TRACE_PRINT entry) into the trace ring buffer. The related file operations are derived from code by Frédéric Weisbecker <fweisbec@gmail.com>. Signed-off-by:
Pekka Paalanen <pq@iki.fi> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Pekka Paalanen authored
Signed-off-by:
-
Pekka Paalanen authored
Also make trace_seq_print_cont() non-static, and add a newline if the seq buffer can't hold all data. Signed-off-by:
-
Pekka Paalanen authored
Offer mmiotrace users a function to inject markers from inside the kernel. This depends on the trace_vprintk() patch. Signed-off-by:
-
Pekka Paalanen authored
trace_vprintk() for easier implementation of tracer specific *_printk functions. Add check check for no_tracer, and implement __ftrace_printk() as a wrapper. Signed-off-by:
-
Pekka Paalanen authored
Moves the mmiotrace specific functions from trace.c to trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(), and tracing_generic_entry_update() are therefore made available outside trace.c. Signed-off-by:
-
Pekka Paalanen authored
Signed-off-by:
-
Steven Rostedt authored
This must be brown paper bag week for Steven Rostedt! While working on ftrace for PPC, I discovered that the hash locking done when CONFIG_FTRACE_MCOUNT_RECORD is not set, is totally incorrect. With a cut and paste error, I had the hash lock macro to lock for both hash_lock _and_ hash_unlock! This bug did not affect x86 since this bug was introduced when CONFIG_FTRACE_MCOUNT_RECORD was added to x86. Signed-off-by:
Steven Rostedt <srostedt@redhat.com> Signed-off-by:
-
Steven Rostedt authored
ftrace_release is necessary for all uses of dynamic ftrace and not just the archs that have CONFIG_FTRACE_MCOUNT_RECORD defined. Signed-off-by:
-
Ingo Molnar authored
make most of the tracers depend on DEBUG_KERNEL - that's their intended purpose. (most distributions have DEBUG_KERNEL enabled anyway so this is not a practical limitation - but it simplifies the tracing menu in the normal case) Signed-off-by: -
Peter Zijlstra authored
While profiling the smp behaviour of the scheduler it was needed to know to which cpu a task got woken. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Peter Zijlstra authored
Currently ftrace_printk only works with the ftrace tracer, switch it to an iter_ctrl setting so we can make us of them with other tracers too. [rostedt@redhat.com: tweak to the disable condition] Signed-off-by:
-
Steven Rostedt authored
An item in the trace buffer that is bigger than one entry may be split up using the TRACE_CONT entry. This makes it a virtual single entry. The current code increments the iterator index even while traversing TRACE_CONT entries, making it look like the iterator is further than it actually is. This patch adds code to not increment the iterator index while skipping over TRACE_CONT entries. Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Steven Rostedt authored
Peter Zijlstra provided me with a nice brown paper bag while letting me know that I was doing a logical AND and not a binary one, making a condition true more often than it should be. Luckily, a false true is handled by the calling function and no harm is done. But this needs to be fixed regardless. Signed-off-by:
-
Michael Ellerman authored
Currently some of the ftrace output goes skewiff if you have more than 9 cpus, and some if you have more than 99. Twiddle with the headers and format strings to make up to 999 cpus display without causing spacing problems. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Steven Rostedt authored
This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: -
Steven Rostedt authored
The warning messages about old objcopy and local functions spam the user quite drastically. Remove the warning until we can find a nicer way of tell the user to upgrade their objcopy. Signed-off-by:
-
Steven Rostedt authored
The mcount record method of ftrace scans objdump for references to mcount. Using mcount as the reference to test if the calls to mcount being replaced are indeed calls to mcount, this use of mcount was also caught as a location to change. Using a variable that points to the mcount address moves this reference into the data section that is not scanned, and we do not use a false location to try and modify. The warn on code was what was used to detect this bug. Signed-off-by:
-
Steven Rostedt authored
This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by:
-
Andrew Morton authored
CHK include/linux/version.h CHK include/linux/utsrelease.h CC scripts/mod/empty.o /bin/sh: /usr/src/25/scripts/recordmcount.pl: Permission denied We shouldn't assume that files have their `x' bits set. There are various ways in which file permissions get lost, including use of patch(1). It might not be correct to assume that perl lives in $PATH? Signed-off-by:
-
Steven Rostedt authored
The --globalize-symbols option came out in objcopy version 2.17. If the kernel is being compiled on a system with a lower version of objcopy, then we can not use the globalize / localize trick to link to symbols pointing to local functions. This patch tests the version of objcopy and will only use the trick if the version is greater than or equal to 2.17. Otherwise, if an object has only local functions within a section, it will give a nice warning and recommend the user to upgrade their objcopy. Leaving the symbols unrecorded is not that big of a deal, since the mcount record method changes the actual mcount code to be a simple "ret" without recording registers or anything. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Ingo Molnar authored
enclose the argument in parenthesis. (especially since we cast it, which is a high prio operation) Signed-off-by: -
Stephen Rothwell authored
After disabling FTRACE_MCOUNT_RECORD via a patch, a dormant build failure surfaced: kernel/trace/ftrace.c: In function 'ftrace_record_ip': kernel/trace/ftrace.c:416: error: incompatible type for argument 1 of '_spin_lock_irqsave' kernel/trace/ftrace.c:433: error: incompatible type for argument 1 of '_spin_lock_irqsave' Introduced by commit 6dad8e07f4c10b17b038e84d29f3ca41c2e55cd0 ("ftrace: add necessary locking for ftrace records"). Signed-off-by: -
Steven Rostedt authored
The modification of code is performed either by kstop_machine, before SMP starts, or on module code before the module is executed. There is no reason to do the modifications from assembly. The copy to and from user functions are sufficient and produces cleaner and easier to read code. Thanks to Benjamin Herrenschmidt for suggesting the idea. Signed-off-by:
-
Steven Rostedt authored
During tests and checks, I've discovered that there were failures to convert mcount callers into nops. Looking deeper into these failures, code that was attempted to be changed was not an mcount caller. The current code only updates if the code being changed is what it expects, but I still investigate any time there is a failure. What was happening is that a weak symbol was being used as a reference for other mcount callers. That weak symbol was also referenced elsewhere so the offsets were using the strong symbol and not the function symbol that it was referenced from. This patch changes the setting up of the mcount_loc section to search for a global function that is not weak. It will pick a local over a weak but if only a weak is found in a section, a warning is printed and the mcount location is not recorded (just to be safe). Signed-off-by:
-
Steven Rostedt authored
I'm trying to keep all the arch changes in recordmcount.pl in one place. I moved your code into that area, by adding the flags to the commands that were passed in. Signed-off-by:
-
Jeremy Fitzhardinge authored
I'm seeing when I use separate src/build dirs: make[3]: *** [arch/x86/kernel/time_32.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory make[3]: *** [arch/x86/kernel/irq_32.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory make[3]: *** [arch/x86/kernel/ldt.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory make[3]: *** [arch/x86/kernel/i8259.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory This fixes it. Signed-off-by: -
Huang Ying authored
This patch fixes incorrect comment style of __ftrace_enabled_save(). Signed-off-by:
Huang Ying <ying.huang@intel.com> Signed-off-by:
-
Steven Rostedt authored
The new design of pre-recorded mcounts and updating the code outside of kstop_machine has changed the way the records themselves are protected. This patch uses the ftrace_lock to protect the records. Note, the lock still does not need to be taken within calls that are only called via kstop_machine, since the that code can not run while the spin lock is held. Also removed the hash_lock needed for the daemon when MCOUNT_RECORD is configured. Also did a slight cleanup of an unused variable. Signed-off-by:
-
Steven Rostedt authored
If one of the self tests of ftrace has disabled the function tracer, do not run the code to convert the mcount calls in modules. Signed-off-by:
-
Frédéric Weisbecker authored
This patch fixes some mistakes on the tracer in warning messages when debugfs fails to create tracing files. Signed-off-by:
-
Ingo Molnar authored
hack around: ld: Relocatable linking with relocations from format elf32-i386 (init/.tmp_gl_calibrate.o) to format elf64-x86-64 (init/.tmp_mx_calibrate.o) i CC arch/x86/mm/extable.o objcopy: 'init/.tmp_mx_calibrate.o': No such file rm: cannot remove `init/.tmp_mx_calibrate.o': No such file or directory ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/extable.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_extable.o) is not supported mv: cannot stat `arch/x86/mm/.tmp_mx_extable.o': No such file or directory ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/fault.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_fault.o) is not supported Signed-off-by: -
Ingo Molnar authored
fix: kernel/built-in.o: In function `ftrace_dump': (.text+0x2e2ea): undefined reference to `ftrace_kill_atomic' Signed-off-by: -
Ingo Molnar authored
fix: In file included from init/main.c:65: include/linux/ftrace.h:166: error: expected ‘,' or ‘;' before ‘{' token make[1]: *** [init/main.o] Error 1 make: *** [init/main.o] Error 2 Signed-off-by:
-
