IBSS needs to release the channel context when leaving
but I evidently missed that. Fix it.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Neil Brown reports that with libertas, my recent cfg80211
SME changes in commit ceca7b71
("cfg80211: separate internal SME implementation") broke
libertas suspend because it we now asked it to disconnect
while already disconnected.

The problematic change is in cfg80211_disconnect() as it
previously checked the SME state and now calls the driver
disconnect operation unconditionally.

Fix this by checking if there's a current_bss indicating
a connection, and do nothing if not.
Reported-and-tested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

There are a few places which check nl80211hdr_put() for an ERR_PTR
but actually it returns NULL on error and never error values.  In
nl80211_testmode_dump() the return wasn't checked at all so I have
added one.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[some whitespace changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In case the AP has different regulatory information than we do,
it can happen that we connect to an AP based on e.g. the world
roaming regulatory data, and then update our database with the
AP's country information disables the channel the AP is using.
If this happens on an HT AP, the bandwidth tracking code will
hit the WARN_ON() and disconnect. Since that's not very useful,
ignore the channel-disable flag in bandwidth tracking.

Cc: stable@vger.kernel.org
Reported-by: Chris Wright <chrisw@sous-sol.org>
Tested-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When a P2P GO interface goes down, cfg80211 doesn't properly
tear it down, leading to warnings later. Add the GO interface
type to the enumeration to tear it down like AP interfaces.
Otherwise, we leave it pending and mac80211's state can get
very confused, leading to warnings later.

Cc: stable@vger.kernel.org
Reported-by: Ilan Peer <ilan.peer@intel.com>
Tested-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

While we're connected, the AP shouldn't change the primary channel
in the HT information. We checked this, and dropped the connection
if it did change it.

Unfortunately, this is causing problems on some APs, e.g. on the
Netgear WRT610NL: the beacons seem to always contain a bad channel
and if we made a connection using a probe response (correct data)
we drop the connection immediately and can basically not connect
properly at all.

Work around this by ignoring the HT primary channel information in
beacons if we're already connected.

Also print out more verbose messages in the other situations to
help diagnose similar bugs quicker in the future.

Cc: stable@vger.kernel.org [3.10]
Acked-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

TX status notification can get lost, or the frames could
get stuck on the queue, so don't wait for the callback
from the driver forever and instead time out after half
a second.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Commit "3d9646d0 mac80211: fix channel selection bug" introduced a possible
infinite loop by moving the out target above the chandef_downgrade
while loop.  When we downgrade to NL80211_CHAN_WIDTH_20_NOHT, we jump
back up to re-run the while loop...indefinitely.  Replace goto with
break and carry on.  This may not be sufficient to connect to the AP,
but will at least keep the cpu from livelocking.  Thanks to Derek Atkins
as an extra pair of debugging eyes.

Cc: stable@kernel.org
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This is similar to the race Linus had reported, but in this case
it's an older bug: nl80211_prepare_wdev_dump() uses the wiphy
index in cb->args[0] as it is and thus parses the message over
and over again instead of just once because 0 is the first valid
wiphy index. Similar code in nl80211_testmode_dump() correctly
offsets the wiphy_index by 1, do that here as well.

Cc: stable@vger.kernel.org
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The current regdomain was not always set by the core. This causes
cards with a custom regulatory domain to ignore user initiated changes
if done before the card was registered.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Acked-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

My commit:

commit 12e7f517
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Thu Feb 28 10:55:26 2013 +0100

    mac80211: cleanup generic suspend/resume procedures

removed check for deleting MONITOR and AP_VLAN when suspend. That can
cause a crash (i.e. in iwlagn_mac_remove_interface()) since we remove
interface in the driver that we did not add before.

Reference:
http://marc.info/?l=linux-kernel&m=137391815113860&w=2Bisected-by: Ortwin Glück <odi@odi.ch>
Reported-and-tested-by: Ortwin Glück <odi@odi.ch>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This patch is intended to avoid the buffering to non-assoc mesh STA
and also to avoid the triggering of frame to non-assoc mesh STA which
could cause kernel panic in specific hw.

One of the examples, is kernel panic happens to ath9k if user space
inserts the mesh STA and not proceed with the SAE and AMPE, and later
the same mesh STA is detected again. The sta_state of the mesh STA remains
at IEEE80211_STA_NONE and if the ieee80211_sta_ps_deliver_wakeup is called
and subsequently the ath_tx_aggr_wakeup, the kernel panic due to
ath_tx_node_init is not called before to initialize the require data
structures.

This issue is reported by Cedric Voncken before.
http://www.spinics.net/lists/linux-wireless/msg106342.html

[<831ea6b4>] ath_tx_aggr_wakeup+0x44/0xcc [ath9k]
[<83084214>] ieee80211_sta_ps_deliver_wakeup+0xb8/0x208 [mac80211]
[<830b9824>] ieee80211_mps_sta_status_update+0x94/0x108 [mac80211]
[<83099398>] ieee80211_sta_ps_transition+0xc94/0x34d8 [mac80211]
[<8022399c>] nf_iterate+0x98/0x104
[<8309bb60>] ieee80211_sta_ps_transition+0x345c/0x34d8 [mac80211]
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When priv_sta == NULL, mi->prev_sample is dereferenced too early. Move
the assignment further down, after the rate_control_send_low call.
Reported-by: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The duplicate retransmission detection code in mac80211
erroneously attempts to do the check for every frame,
even frames that don't have a sequence control field or
that don't use it (QoS-Null frames.)

This is problematic because it causes the code to access
data beyond the end of the SKB and depending on the data
there will drop packets erroneously.

Correct the code to not do duplicate detection for such
frames.

I found this error while testing AP powersave, it lead
to retransmitted PS-Poll frames being dropped entirely
as the data beyond the end of the SKB was always zero.

Cc: stable@vger.kernel.org [all versions]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

RSSI threshold value used for mesh peering should be in
negative value. After range checks to mesh parameters is
introduced, this is not allowed. Fix this.
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>

As reported in https://bugzilla.kernel.org/show_bug.cgi?id=60514,
the station loop never initialises 'sinfo' and therefore adds up
a stack values, leaking stack information (the number of times it
adds values is easily obtained another way.)

Fix this by initialising the sinfo for each station to add.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>

The CCK group needs special treatment to set the right flags and rate
index. Add this missing check to prevent setting broken rates for tx
packets.

Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>

restore_regulatory_settings() requires the RTNL to be held,
add the missing locking in reg_timeout_work().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When splitting the SME implementation from the MLME code,
I introduced a few bugs:
 * association failures no longer sent a connect-failure event
 * getting disassociated from the AP caused deauth to be sent
   but state wasn't cleaned up, leading to warnings
 * authentication failures weren't cleaned up properly, causing
   new connection attempts to warn and fail

Fix these bugs.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>

These two events were sent to the default network
namespace.

This caused AP mode in a non-default netns to not
work correctly. Mgmt tx status was multicasted to
a different (default) netns instead of the one the
AP was in.

Cc: stable@vger.kernel.org
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pull slab update from Pekka Enberg:
 "Highlights:

  - Fix for boot-time problems on some architectures due to
    init_lock_keys() not respecting kmalloc_caches boundaries
    (Christoph Lameter)

  - CONFIG_SLUB_CPU_PARTIAL requested by RT folks (Joonsoo Kim)

  - Fix for excessive slab freelist draining (Wanpeng Li)

  - SLUB and SLOB cleanups and fixes (various people)"

I ended up editing the branch, and this avoids two commits at the end
that were immediately reverted, and I instead just applied the oneliner
fix in between myself.

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
  slub: Check for page NULL before doing the node_match check
  mm/slab: Give s_next and s_stop slab-specific names
  slob: Check for NULL pointer before calling ctor()
  slub: Make cpu partial slab support configurable
  slab: add kmalloc() to kernel API documentation
  slab: fix init_lock_keys
  slob: use DIV_ROUND_UP where possible
  slub: do not put a slab to cpu partial list when cpu_partial is 0
  mm/slub: Use node_nr_slabs and node_nr_objs in get_slabinfo
  mm/slub: Drop unnecessary nr_partials
  mm/slab: Fix /proc/slabinfo unwriteable for slab
  mm/slab: Sharing s_next and s_stop between slab and slub
  mm/slab: Fix drain freelist excessively
  slob: Rework #ifdeffery in slab.h
  mm, slab: moved kmem_cache_alloc_node comment to correct place

In the -rt kernel (mrg), we hit the following dump:

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180
PGD a2d39067 PUD b1641067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: sunrpc cpufreq_ondemand ipv6 tg3 joydev sg serio_raw pcspkr k8temp amd64_edac_mod edac_core i2c_piix4 e100 mii shpchp ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom sata_svw ata_generic pata_acpi pata_serverworks radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod
CPU 3
Pid: 20878, comm: hackbench Not tainted 3.6.11-rt25.14.el6rt.x86_64 #1 empty empty/Tyan Transport GT24-B3992
RIP: 0010:[<ffffffff811573f1>]  [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180
RSP: 0018:ffff8800a9b17d70  EFLAGS: 00010213
RAX: 0000000000000000 RBX: 0000000001200011 RCX: ffff8800a06d8000
RDX: 0000000004d92a03 RSI: 00000000000000d0 RDI: ffff88013b805500
RBP: ffff8800a9b17dc0 R08: ffff88023fd14d10 R09: ffffffff81041cbd
R10: 00007f4e3f06e9d0 R11: 0000000000000246 R12: ffff88013b805500
R13: ffff8801ff46af40 R14: 0000000000000001 R15: 0000000000000000
FS:  00007f4e3f06e700(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 00000000a2d3a000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process hackbench (pid: 20878, threadinfo ffff8800a9b16000, task ffff8800a06d8000)
Stack:
 ffff8800a9b17da0 ffffffff81202e08 ffff8800a9b17de0 000000d001200011
 0000000001200011 0000000001200011 0000000000000000 0000000000000000
 00007f4e3f06e9d0 0000000000000000 ffff8800a9b17e60 ffffffff81041cbd
Call Trace:
 [<ffffffff81202e08>] ? current_has_perm+0x68/0x80
 [<ffffffff81041cbd>] copy_process+0xdd/0x15b0
 [<ffffffff810a2125>] ? rt_up_read+0x25/0x30
 [<ffffffff8104369a>] do_fork+0x5a/0x360
 [<ffffffff8107c66b>] ? migrate_enable+0xeb/0x220
 [<ffffffff8100b068>] sys_clone+0x28/0x30
 [<ffffffff81527423>] stub_clone+0x13/0x20
 [<ffffffff81527152>] ? system_call_fastpath+0x16/0x1b
Code: 89 fc 89 75 cc 41 89 d6 4d 8b 04 24 65 4c 03 04 25 48 ae 00 00 49 8b 50 08 4d 8b 28 49 8b 40 10 4d 85 ed 74 12 41 83 fe ff 74 27 <48> 8b 00 48 c1 e8 3a 41 39 c6 74 1b 8b 75 cc 4c 89 c9 44 89 f2
RIP  [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180
 RSP <ffff8800a9b17d70>
CR2: 0000000000000000
---[ end trace 0000000000000002 ]---

Now, this uses SLUB pretty much unmodified, but as it is the -rt kernel
with CONFIG_PREEMPT_RT set, spinlocks are mutexes, although they do
disable migration. But the SLUB code is relatively lockless, and the
spin_locks there are raw_spin_locks (not converted to mutexes), thus I
believe this bug can happen in mainline without -rt features. The -rt
patch is just good at triggering mainline bugs ;-)

Anyway, looking at where this crashed, it seems that the page variable
can be NULL when passed to the node_match() function (which does not
check if it is NULL). When this happens we get the above panic.

As page is only used in slab_alloc() to check if the node matches, if
it's NULL I'm assuming that we can say it doesn't and call the
__slab_alloc() code. Is this a correct assumption?
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more vfs stuff from Al Viro:
 "O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including
  making simple_lookup() usable for filesystems with non-NULL s_d_op,
  which allows us to get rid of quite a bit of ugliness"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  sunrpc: now we can just set ->s_d_op
  cgroup: we can use simple_lookup() now
  efivarfs: we can use simple_lookup() now
  make simple_lookup() usable for filesystems that set ->s_d_op
  configfs: don't open-code d_alloc_name()
  __rpc_lookup_create_exclusive: pass string instead of qstr
  rpc_create_*_dir: don't bother with qstr
  llist: llist_add() can use llist_add_batch()
  llist: fix/simplify llist_add() and llist_add_batch()
  fput: turn "list_head delayed_fput_list" into llist_head
  fs/file_table.c:fput(): add comment
  Safer ABI for O_TMPFILE

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... and use d_hash_and_lookup() instead of open-coding it, for fsck sake...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

just pass the name
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull x86 platform driver updates from Matthew Garrett:
 "Nothing overly exciting here - a couple of new drivers that don't do a
  great deal, along with some miscellaneous fixes and a couple of small
  feature enablement patches"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  x86 platform drivers: fix gpio leak
  toshiba_acpi: Add dependency on SERIO_I8042
  asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. 1015E/U
  Add trivial driver to disable Intel Smart Connect
  Add support driver for Intel Rapid Start Technology
  hp-wmi: add supports for POST code error
  asus-wmi: control wlan-led only if wapf == 4
  drivers/platform/x86/intel_ips: Convert to module_pci_driver
  asus-nb-wmi: ignore ALS notification key code
  asus-wmi: append newline to messages
  x86: asus-laptop: fix invalid point access
  x86: msi-laptop: fix memleak
  amilo-rfkill: Add dependency on SERIO_I8042
  dell-laptop: fix error return code in dell_init()
  hp-wmi: Enable hotkeys on some systems

Pull second round of input updates from Dmitry Torokhov:
 "An update to Elantech driver to support hardware v7, fix to the new
  cyttsp4 driver to use proper addressing, ads7846 device tree support
  and nspire-keypad got a small cleanup."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: nspire-keypad - replace magic offset with define
  Input: elantech - fix for newer hardware versions (v7)
  Input: cyttsp4 - use 16bit address for I2C/SPI communication
  Input: ads7846 - add device tree bindings
  Input: ads7846 - make sure we do not change platform data

Pull networking fixes from David Miller:
 "Just a bunch of small fixes and tidy ups:

   1) Finish the "busy_poll" renames, from Eliezer Tamir.

   2) Fix RCU stalls in IFB driver, from Ding Tianhong.

   3) Linearize buffers properly in tun/macvtap zerocopy code.

   4) Don't crash on rmmod in vxlan, from Pravin B Shelar.

   5) Spinlock used before init in alx driver, from Maarten Lankhorst.

   6) A sparse warning fix in bnx2x broke TSO checksums, fix from Dmitry
      Kravkov.

   7) Dummy and ifb driver load failure paths can oops, fixes from Tan
      Xiaojun and Ding Tianhong.

   8) Correct MTU calculations in IP tunnels, from Alexander Duyck.

   9) Account all TCP retransmits in SNMP stats properly, from Yuchung
      Cheng.

  10) atl1e and via-rhine do not handle DMA mapping failures properly,
      from Neil Horman.

  11) Various equal-cost multipath route fixes in ipv6 from Hannes
      Frederic Sowa"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
  ipv6: only static routes qualify for equal cost multipathing
  via-rhine: fix dma mapping errors
  atl1e: fix dma mapping warnings
  tcp: account all retransmit failures
  usb/net/r815x: fix cast to restricted __le32
  usb/net/r8152: fix integer overflow in expression
  net: access page->private by using page_private
  net: strict_strtoul is obsolete, use kstrtoul instead
  drivers/net/ieee802154: don't use devm_pinctrl_get_select_default() in probe
  drivers/net/ethernet/cadence: don't use devm_pinctrl_get_select_default() in probe
  drivers/net/can/c_can: don't use devm_pinctrl_get_select_default() in probe
  net/usb: add relative mii functions for r815x
  net/tipc: use %*phC to dump small buffers in hex form
  qlcnic: Adding Maintainers.
  gre: Fix MTU sizing check for gretap tunnels
  pkt_sched: sch_qfq: remove forward declaration of qfq_update_agg_ts
  pkt_sched: sch_qfq: improve efficiency of make_eligible
  gso: Update tunnel segmentation to support Tx checksum offload
  inet: fix spacing in assignment
  ifb: fix oops when loading the ifb failed
  ...

Pull final round of SCSI updates from James Bottomley:
 "This is the remaining set of SCSI patches for the merge window.  It's
  mostly driver updates (scsi_debug, qla2xxx, storvsc, mp3sas).  There
  are also several bug fixes in fcoe, libfc, and megaraid_sas.  We also
  have a couple of core changes to try to make device destruction more
  deterministic"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
  [SCSI] scsi constants: command, sense key + additional sense strings
  fcoe: Reduce number of sparse warnings
  fcoe: Stop fc_rport_priv structure leak
  libfcoe: Fix meaningless log statement
  libfc: Differentiate echange timer cancellation debug statements
  libfc: Remove extra space in fc_exch_timer_cancel definition
  fcoe: fix the link error status block sparse warnings
  fcoe: Fix smatch warning in fcoe_fdmi_info function
  libfc: Reject PLOGI from nodes with incompatible role
  [SCSI] enable destruction of blocked devices which fail LUN scanning
  [SCSI] Fix race between starved list and device removal
  [SCSI] megaraid_sas: fix a bug for 64 bit arches
  [SCSI] scsi_debug: reduce duplication between prot_verify_read and prot_verify_write
  [SCSI] scsi_debug: simplify offset calculation for dif_storep
  [SCSI] scsi_debug: invalidate protection info for unmapped region
  [SCSI] scsi_debug: fix NULL pointer dereference with parameters dif=0 dix=1
  [SCSI] scsi_debug: fix incorrectly nested kmap_atomic()
  [SCSI] scsi_debug: fix invalid address passed to kunmap_atomic()
  [SCSI] mpt3sas: Bump driver version to v02.100.00.00
  [SCSI] mpt3sas: when async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed
  ...

Pull scheduler fix from Thomas Gleixner:
 "Fix a potential deadlock versus hrtimers"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix HRTICK

Pull irq updates from Thomas Gleixner:
 - core fix for missing round up in the generic irq chip implementation
 - new irq chip for MOXA SoCs
 - a few fixes and cleanups in the irqchip drivers

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Add support for MOXA ART SoCs
  genirq: generic chip: Use DIV_ROUND_UP to calculate numchips
  irqchip: nvic: Fix wrong num_ct argument for irq_alloc_domain_generic_chips()
  irqchip: sun4i: Staticize sun4i_irq_ack()
  irqchip: vt8500: Staticize local symbols

Pull timer updates from Thomas Gleixner:
 - watchdog fixes for full dynticks
 - improved debug output for full dynticks
 - remove an obsolete full dynticks check
 - two ARM SoC clocksource drivers for sharing across SoCs
 - tick broadcast fix for CPU hotplug

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick: broadcast: Check broadcast mode on CPU hotplug
  clocksource: arm_global_timer: Add ARM global timer support
  clocksource: Add Marvell Orion SoC timer
  nohz: Remove obsolete check for full dynticks CPUs to be RCU nocbs
  watchdog: Boot-disable by default on full dynticks
  watchdog: Rename confusing state variable
  watchdog: Register / unregister watchdog kthreads on sysctl control
  nohz: Warn if the machine can not perform nohz_full

Pull perf fixes from Thomas Gleixner:
 - fix for do_div() abuse on x86
 - locking fix in perf core
 - a pile of (build) fixes and cleanups in perf tools

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  perf/x86: Fix incorrect use of do_div() in NMI warning
  perf: Fix perf_lock_task_context() vs RCU
  perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario
  perf: Clone child context from parent context pmu
  perf script: Fix broken include in Context.xs
  perf tools: Fix -ldw/-lelf link test when static linking
  perf tools: Revert regression in configuration of Python support
  perf tools: Fix perf version generation
  perf stat: Fix per-socket output bug for uncore events
  perf symbols: Fix vdso list searching
  perf evsel: Fix missing increment in sample parsing
  perf tools: Update symbol_conf.nr_events when processing attribute events
  perf tools: Fix new_term() missing free on error path
  perf tools: Fix parse_events_terms() segfault on error path
  perf evsel: Fix count parameter to read call in event_format__new
  perf tools: fix a typo of a Power7 event name
  perf tools: Fix -x/--exclude-other option for report command
  perf evlist: Enhance perf_evlist__start_workload()
  perf record: Remove -f/--force option
  perf record: Remove -A/--append option
  ...

Pull core locking updates from Thomas Gleixner:
 "Header cleanup as requested by Linus"

(This is the "don't include support for ww_mutex in a header file that
everybody wants, when almost nobody wants the ww part" change)

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Move ww_mutex definitions to ww_mutex.h