Skip to content

L
linux
Switch branch/tag
  1. 03 Sep, 2024 12 commits
  3. 02 Sep, 2024 2 commits
  5. 01 Sep, 2024 3 commits
  7. 30 Aug, 2024 9 commits
    • Luiz Augusto von Dentz's avatar
      Bluetooth: MGMT: Ignore keys being loaded with invalid type · 1e9683c9
      Luiz Augusto von Dentz authored 
      Due to 59b047bc there could be keys stored
with the wrong address type so this attempt to detect it and ignore them
instead of just failing to load all keys.

Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      1e9683c9
    • Luiz Augusto von Dentz's avatar
      Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE" · 532f8bcd
      Luiz Augusto von Dentz authored 
      This reverts commit 59b047bc which
breaks compatibility with commands like:

bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74  {0x0001} [hci0]
        Keys: 2
        BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd)
        Key type: Authenticated key from P-256 (0x03)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 6ed96089bd9765be2f2c971b0b95f624
        LE Address: D7:2A:DE:1E:73:A2 (Static)
        Key type: Unauthenticated key from P-256 (0x02)
        Central: 0x00
        Encryption size: 16
        Diversifier[2]: 0000
        Randomizer[8]: 0000000000000000
        Key[16]: 87dd2546ededda380ffcdc0a8faa4597
@ MGMT Event: Command Status (0x0002) plen 3                {0x0001} [hci0]
      Load Long Term Keys (0x0013)
        Status: Invalid Parameters (0x0d)

Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      532f8bcd
    • Luiz Augusto von Dentz's avatar
      Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT · 227a0cdf
      Luiz Augusto von Dentz authored 
      MGMT_OP_DISCONNECT can be called while mgmt_device_connected has not
been called yet, which will cause the connection procedure to be
aborted, so mgmt_device_disconnected shall still respond with command
complete to MGMT_OP_DISCONNECT and just not emit
MGMT_EV_DEVICE_DISCONNECTED since MGMT_EV_DEVICE_CONNECTED was never
sent.

To fix this MGMT_OP_DISCONNECT is changed to work similarly to other
command which do use hci_cmd_sync_queue and then use hci_conn_abort to
disconnect and returns the result, in order for hci_conn_abort to be
used from hci_cmd_sync context it now uses hci_cmd_sync_run_once.

Link: https://github.com/bluez/bluez/issues/932
Fixes: 12d4a3b2 ("Bluetooth: Move check for MGMT_CONNECTED flag into mgmt.c")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      227a0cdf
    • Luiz Augusto von Dentz's avatar
      Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once · c898f6d7
      Luiz Augusto von Dentz authored 
      This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like
hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when
already on hdev->cmd_sync_work context.
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      c898f6d7
    • Douglas Anderson's avatar
      Bluetooth: qca: If memdump doesn't work, re-enable IBS · 8ae22de9
      Douglas Anderson authored 
      On systems in the field, we are seeing this sometimes in the kernel logs:
  Bluetooth: qca_controller_memdump() hci0: hci_devcd_init Return:-95

This means that _something_ decided that it wanted to get a memdump
but then hci_devcd_init() returned -EOPNOTSUPP (AKA -95).

The cleanup code in qca_controller_memdump() when we get back an error
from hci_devcd_init() undoes most things but forgets to clear
QCA_IBS_DISABLED. One side effect of this is that, during the next
suspend, qca_suspend() will always get a timeout.

Let's fix it so that we clear the bit.

Fixes: 06d3fdfc ("Bluetooth: hci_qca: Add qcom devcoredump support")
Reviewed-by: default avatarGuenter Roeck <groeck@chromium.org>
Reviewed-by: default avatarStephen Boyd <swboyd@chromium.org>
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      8ae22de9
    • Martin Jocic's avatar
      can: kvaser_pciefd: Use a single write when releasing RX buffers · dd885d90
      Martin Jocic authored 
      Kvaser's PCIe cards uses the KCAN FPGA IP block which has dual 4K
buffers for incoming messages shared by all (currently up to eight)
channels. While the driver processes messages in one buffer, new
incoming messages are stored in the other and so on.

The design of KCAN is such that a buffer must be fully read and then
released. Releasing a buffer will make the FPGA switch buffers. If the
other buffer contains at least one incoming message the FPGA will also
instantly issue a new interrupt, if not the interrupt will be issued
after receiving the first new message.

With IRQx interrupts, it takes a little time for the interrupt to
happen, enough for any previous ISR call to do it's business and
return, but MSI interrupts are way faster so this time is reduced to
almost nothing.

So with MSI, releasing the buffer HAS to be the very last action of
the ISR before returning, otherwise the new interrupt might be
"masked" by the kernel because the previous ISR call hasn't returned.
And the interrupts are edge-triggered so we cannot loose one, or the
ping-pong reading process will stop.

This is why this patch modifies the driver to use a single write to
the SRB_CMD register before returning.
Signed-off-by: default avatarMartin Jocic <martin.jocic@kvaser.com>
Reviewed-by: default avatarVincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20240830153113.2081440-1-martin.jocic@kvaser.com
Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      dd885d90
    • Cong Wang's avatar
      tcp_bpf: fix return value of tcp_bpf_sendmsg() · fe1910f9
      Cong Wang authored 
      When we cork messages in psock->cork, the last message triggers the
flushing will result in sending a sk_msg larger than the current
message size. In this case, in tcp_bpf_send_verdict(), 'copied' becomes
negative at least in the following case:

468         case __SK_DROP:
469         default:
470                 sk_msg_free_partial(sk, msg, tosend);
471                 sk_msg_apply_bytes(psock, tosend);
472                 *copied -= (tosend + delta); // <==== HERE
473                 return -EACCES;

Therefore, it could lead to the following BUG with a proper value of
'copied' (thanks to syzbot). We should not use negative 'copied' as a
return value here.

  ------------[ cut here ]------------
  kernel BUG at net/socket.c:733!
  Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 UID: 0 PID: 3265 Comm: syz-executor510 Not tainted 6.11.0-rc3-syzkaller-00060-gd07b4328 #0
  Hardware name: linux,dummy-virt (DT)
  pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
  pc : sock_sendmsg_nosec net/socket.c:733 [inline]
  pc : sock_sendmsg_nosec net/socket.c:728 [inline]
  pc : __sock_sendmsg+0x5c/0x60 net/socket.c:745
  lr : sock_sendmsg_nosec net/socket.c:730 [inline]
  lr : __sock_sendmsg+0x54/0x60 net/socket.c:745
  sp : ffff800088ea3b30
  x29: ffff800088ea3b30 x28: fbf00000062bc900 x27: 0000000000000000
  x26: ffff800088ea3bc0 x25: ffff800088ea3bc0 x24: 0000000000000000
  x23: f9f00000048dc000 x22: 0000000000000000 x21: ffff800088ea3d90
  x20: f9f00000048dc000 x19: ffff800088ea3d90 x18: 0000000000000001
  x17: 0000000000000000 x16: 0000000000000000 x15: 000000002002ffaf
  x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
  x11: 0000000000000000 x10: ffff8000815849c0 x9 : ffff8000815b49c0
  x8 : 0000000000000000 x7 : 000000000000003f x6 : 0000000000000000
  x5 : 00000000000007e0 x4 : fff07ffffd239000 x3 : fbf00000062bc900
  x2 : 0000000000000000 x1 : 0000000000000000 x0 : 00000000fffffdef
  Call trace:
   sock_sendmsg_nosec net/socket.c:733 [inline]
   __sock_sendmsg+0x5c/0x60 net/socket.c:745
   ____sys_sendmsg+0x274/0x2ac net/socket.c:2597
   ___sys_sendmsg+0xac/0x100 net/socket.c:2651
   __sys_sendmsg+0x84/0xe0 net/socket.c:2680
   __do_sys_sendmsg net/socket.c:2689 [inline]
   __se_sys_sendmsg net/socket.c:2687 [inline]
   __arm64_sys_sendmsg+0x24/0x30 net/socket.c:2687
   __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
   invoke_syscall+0x48/0x110 arch/arm64/kernel/syscall.c:49
   el0_svc_common.constprop.0+0x40/0xe0 arch/arm64/kernel/syscall.c:132
   do_el0_svc+0x1c/0x28 arch/arm64/kernel/syscall.c:151
   el0_svc+0x34/0xec arch/arm64/kernel/entry-common.c:712
   el0t_64_sync_handler+0x100/0x12c arch/arm64/kernel/entry-common.c:730
   el0t_64_sync+0x19c/0x1a0 arch/arm64/kernel/entry.S:598
  Code: f9404463 d63f0060 3108441f 54fffe81 (d4210000)
  ---[ end trace 0000000000000000 ]---

Fixes: 4f738adb ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Reported-by: syzbot+58c03971700330ce14d8@syzkaller.appspotmail.com
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: default avatarCong Wang <cong.wang@bytedance.com>
Reviewed-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Acked-by: default avatarMartin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20240821030744.320934-1-xiyou.wangcong@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      fe1910f9
    • Jeongjun Park's avatar
      net/smc: prevent NULL pointer dereference in txopt_get · 98d4435e
      Jeongjun Park authored 
      Since smc_inet6_prot does not initialize ipv6_pinfo_offset, inet6_create()
copies an incorrect address value, sk + 0 (offset), to inet_sk(sk)->pinet6.

In addition, since inet_sk(sk)->pinet6 and smc_sk(sk)->clcsock practically
point to the same address, when smc_create_clcsk() stores the newly
created clcsock in smc_sk(sk)->clcsock, inet_sk(sk)->pinet6 is corrupted
into clcsock. This causes NULL pointer dereference and various other
memory corruptions.

To solve this problem, you need to initialize ipv6_pinfo_offset, add a
smc6_sock structure, and then add ipv6_pinfo as the second member of
the smc_sock structure.
Reported-by: default avatarsyzkaller <syzkaller@googlegroups.com>
Fixes: d25a92cc ("net/smc: Introduce IPPROTO_SMC")
Signed-off-by: default avatarJeongjun Park <aha310510@gmail.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98d4435e
    • Jakub Kicinski's avatar
      Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · 1bb3c548
      Jakub Kicinski authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-08-28 (igb, ice)

This series contains updates to igb and ice drivers.

Daiwei Li restores writing the TSICR (TimeSync Interrupt Cause)
register on 82850 devices to workaround a hardware issue for igb.

Dawid detaches netdev device for reset to avoid ethtool accesses during
reset causing NULL pointer dereferences on ice.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Add netif_device_attach/detach into PF reset flow
  igb: Fix not clearing TimeSync interrupts for 82580
====================

Link: https://patch.msgid.link/20240828225444.645154-1-anthony.l.nguyen@intel.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1bb3c548
  9. 29 Aug, 2024 14 commits
    • Jakub Kicinski's avatar
      MAINTAINERS: exclude bluetooth and wireless DT bindings from netdev ML · b57d643a
      Jakub Kicinski authored 
      We exclude wireless drivers from the netdev@ traffic, to delegate
it to linux-wireless@, and avoid overwhelming netdev@.
Bluetooth drivers are implicitly excluded because they live under
drivers/bluetooth, not drivers/net.

In both cases DT bindings sit under Documentation/devicetree/bindings/net/
and aren't excluded. So if a patch series touches DT bindings
netdev@ ends up getting CCed, and these are usually fairly boring
series.
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240828175821.2960423-1-kuba@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      b57d643a
    • Linus Torvalds's avatar
      Merge tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 0dd5dd63
      Linus Torvalds authored 
      Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth, wireless and netfilter.

  No known outstanding regressions.

  Current release - regressions:

   - wifi: iwlwifi: fix hibernation

   - eth: ionic: prevent tx_timeout due to frequent doorbell ringing

  Previous releases - regressions:

   - sched: fix sch_fq incorrect behavior for small weights

   - wifi:
      - iwlwifi: take the mutex before running link selection
      - wfx: repair open network AP mode

   - netfilter: restore IP sanity checks for netdev/egress

   - tcp: fix forever orphan socket caused by tcp_abort

   - mptcp: close subflow when receiving TCP+FIN

   - bluetooth: fix random crash seen while removing btnxpuart driver

  Previous releases - always broken:

   - mptcp: more fixes for the in-kernel PM

   - eth: bonding: change ipsec_lock from spin lock to mutex

   - eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response

  Misc:

   - documentation: drop special comment style for net code"

* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  nfc: pn533: Add poll mod list filling check
  mailmap: update entry for Sriram Yagnaraman
  selftests: mptcp: join: check re-re-adding ID 0 signal
  mptcp: pm: ADD_ADDR 0 is not a new address
  selftests: mptcp: join: validate event numbers
  mptcp: avoid duplicated SUB_CLOSED events
  selftests: mptcp: join: check re-re-adding ID 0 endp
  mptcp: pm: fix ID 0 endp usage after multiple re-creations
  mptcp: pm: do not remove already closed subflows
  selftests: mptcp: join: no extra msg if no counter
  selftests: mptcp: join: check re-adding init endp with != id
  mptcp: pm: reset MPC endp ID when re-added
  mptcp: pm: skip connecting to already established sf
  mptcp: pm: send ACK on an active subflow
  selftests: mptcp: join: check removing ID 0 endpoint
  mptcp: pm: fix RM_ADDR ID for the initial subflow
  mptcp: pm: reuse ID 0 after delete and re-add
  net: busy-poll: use ktime_get_ns() instead of local_clock()
  sctp: fix association labeling in the duplicate COOKIE-ECHO case
  mptcp: pr_debug: add missing \n at the end
  ...
      0dd5dd63
    • Aleksandr Mishin's avatar
      nfc: pn533: Add poll mod list filling check · febccb39
      Aleksandr Mishin authored 
      In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.

Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
  nfc_start_poll()
    ->start_poll()
    pn533_start_poll()

Add poll mod list filling check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: dfccd0f5 ("NFC: pn533: Add some polling entropy")
Signed-off-by: default avatarAleksandr Mishin <amishin@t-argos.ru>
Acked-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ruSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      febccb39
    • Paolo Abeni's avatar
      Merge tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf · 0240bceb
      Paolo Abeni authored 
      Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes
payload from netdev/egress by subtracting skb_network_offset() when
validating IPv4 packet length, otherwise 'meta l4proto udp' never
matches.

Patch #2 subtracts skb_network_offset() when validating IPv6 packet
length for netdev/egress.

netfilter pull request 24-08-28

* tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation
  netfilter: nf_tables: restore IP sanity checks for netdev/egress
====================

Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.orgSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      0240bceb
    • Sriram Yagnaraman's avatar
      mailmap: update entry for Sriram Yagnaraman · 6213dcc7
      Sriram Yagnaraman authored 
      Link my old est.tech address to my active mail address
Signed-off-by: default avatarSriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Reviewed-by: Kurt Kanzenbach's avatarKurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/20240828072417.4111996-1-sriram.yagnaraman@ericsson.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      6213dcc7
    • Paolo Abeni's avatar
      Merge branch 'mptcp-more-fixes-for-the-in-kernel-pm' · b666a651
      Paolo Abeni authored 
      Matthieu Baerts says:

====================
mptcp: more fixes for the in-kernel PM

Here is a new batch of fixes for the MPTCP in-kernel path-manager:

Patch 1 ensures the address ID is set to 0 when the path-manager sends
an ADD_ADDR for the address of the initial subflow. The same fix is
applied when a new subflow is created re-using this special address. A
fix for v6.0.

Patch 2 is similar, but for the case where an endpoint is removed: if
this endpoint was used for the initial address, it is important to send
a RM_ADDR with this ID set to 0, and look for existing subflows with the
ID set to 0. A fix for v6.0 as well.

Patch 3 validates the two previous patches.

Patch 4 makes the PM selecting an "active" path to send an address
notification in an ACK, instead of taking the first path in the list. A
fix for v5.11.

Patch 5 fixes skipping the establishment of a new subflow if a previous
subflow using the same pair of addresses is being closed. A fix for
v5.13.

Patch 6 resets the ID linked to the initial subflow when the linked
endpoint is re-added, possibly with a different ID. A fix for v6.0.

Patch 7 validates the three previous patches.

Patch 8 is a small fix for the MPTCP Join selftest, when being used with
older subflows not supporting all MIB counters. A fix for a commit
introduced in v6.4, but backported up to v5.10.

Patch 9 avoids the PM to try to close the initial subflow multiple
times, and increment counters while nothing happened. A fix for v5.10.

Patch 10 stops incrementing local_addr_used and add_addr_accepted
counters when dealing with the address ID 0, because these counters are
not taking into account the initial subflow, and are then not
decremented when the linked addresses are removed. A fix for v6.0.

Patch 11 validates the previous patch.

Patch 12 avoids the PM to send multiple SUB_CLOSED events for the
initial subflow. A fix for v5.12.

Patch 13 validates the previous patch.

Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it
in order to re-create the initial subflow if it has been closed, even if
the limit for *new* addresses -- not taking into account the address of
the initial subflow -- has been reached. A fix for v5.10.

Patch 15 validates the previous patch.
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
---
Matthieu Baerts (NGI0) (15):
      mptcp: pm: reuse ID 0 after delete and re-add
      mptcp: pm: fix RM_ADDR ID for the initial subflow
      selftests: mptcp: join: check removing ID 0 endpoint
      mptcp: pm: send ACK on an active subflow
      mptcp: pm: skip connecting to already established sf
      mptcp: pm: reset MPC endp ID when re-added
      selftests: mptcp: join: check re-adding init endp with != id
      selftests: mptcp: join: no extra msg if no counter
      mptcp: pm: do not remove already closed subflows
      mptcp: pm: fix ID 0 endp usage after multiple re-creations
      selftests: mptcp: join: check re-re-adding ID 0 endp
      mptcp: avoid duplicated SUB_CLOSED events
      selftests: mptcp: join: validate event numbers
      mptcp: pm: ADD_ADDR 0 is not a new address
      selftests: mptcp: join: check re-re-adding ID 0 signal

 net/mptcp/pm.c                                  |   4 +-
 net/mptcp/pm_netlink.c                          |  87 ++++++++++----
 net/mptcp/protocol.c                            |   6 +
 net/mptcp/protocol.h                            |   5 +-
 tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++----
 tools/testing/selftests/net/mptcp/mptcp_lib.sh  |   4 +
 6 files changed, 209 insertions(+), 50 deletions(-)
---
base-commit: 3a0504d5
change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817

Best regards,
====================

Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.orgSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      b666a651
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: check re-re-adding ID 0 signal · f18fa2ab
      Matthieu Baerts (NGI0) authored 
      This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      f18fa2ab
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: ADD_ADDR 0 is not a new address · 57f86203
      Matthieu Baerts (NGI0) authored 
      The ADD_ADDR 0 with the address from the initial subflow should not be
considered as a new address: this is not something new. If the host
receives it, it simply means that the address is available again.

When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider
it as new by not incrementing the 'add_addr_accepted' counter. But the
'accept_addr' might not be set if the limit has already been reached:
this can be bypassed in this case. But before, it is important to check
that this ADD_ADDR for the ID 0 is for the same address as the initial
subflow. If not, it is not something that should happen, and the
ADD_ADDR can be ignored.

Note that if an ADD_ADDR is received while there is already a subflow
opened using the same address, this ADD_ADDR is ignored as well. It
means that if multiple ADD_ADDR for ID 0 are received, there will not be
any duplicated subflows created by the client.

Fixes: d0876b22 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      57f86203
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: validate event numbers · 20ccc7c5
      Matthieu Baerts (NGI0) authored 
      This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.

A new helper has been introduced to easily check these events. The
missing events have been added to the lib.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: b911c97c ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      20ccc7c5
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: avoid duplicated SUB_CLOSED events · d82809b6
      Matthieu Baerts (NGI0) authored 
      The initial subflow might have already been closed, but still in the
connection list. When the worker is instructed to close the subflows
that have been marked as closed, it might then try to close the initial
subflow again.

 A consequence of that is that the SUB_CLOSED event can be seen twice:

  # ip mptcp endpoint
  1.1.1.1 id 1 subflow dev eth0
  2.2.2.2 id 2 subflow dev eth1

  # ip mptcp monitor &
  [         CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
  [     ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
  [  SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9

  # ip mptcp endpoint delete id 1
  [       SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
  [       SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9

The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the
second one from __mptcp_close_subflow().

To avoid doing the post-closed processing twice, the subflow is now
marked as closed the first time.

Note that it is not enough to check if we are dealing with the first
subflow and check its sk_state: the subflow might have been reset or
closed before calling mptcp_close_ssk().

Fixes: b911c97c ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Tested-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      d82809b6
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: check re-re-adding ID 0 endp · d397d724
      Matthieu Baerts (NGI0) authored 
      This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.

Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      d397d724
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: fix ID 0 endp usage after multiple re-creations · 9366922a
      Matthieu Baerts (NGI0) authored 
      'local_addr_used' and 'add_addr_accepted' are decremented for addresses
not related to the initial subflow (ID0), because the source and
destination addresses of the initial subflows are known from the
beginning: they don't count as "additional local address being used" or
"ADD_ADDR being accepted".

It is then required not to increment them when the entrypoint used by
the initial subflow is removed and re-added during a connection. Without
this modification, this entrypoint cannot be removed and re-added more
than once.
Reported-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512
Fixes: 3ad14f54 ("mptcp: more accurate MPC endpoint tracking")
Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com
Cc: stable@vger.kernel.org
Tested-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      9366922a
    • Matthieu Baerts (NGI0)'s avatar
      mptcp: pm: do not remove already closed subflows · 58e1b66b
      Matthieu Baerts (NGI0) authored 
      It is possible to have in the list already closed subflows, e.g. the
initial subflow has been already closed, but still in the list. No need
to try to close it again, and increments the related counters again.

Fixes: 0ee4261a ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMat Martineau <martineau@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      58e1b66b
    • Matthieu Baerts (NGI0)'s avatar
      selftests: mptcp: join: no extra msg if no counter · 76a2d839
      Matthieu Baerts (NGI0) authored 
      The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.

While at it, fix the indentation around, which is wrong since the same
commit.

Fixes: 47867f0a ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarGeliang Tang <geliang@kernel.org>
Signed-off-by: default avatarMatthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      76a2d839
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7