- 04 Aug, 2015 29 commits
-
-
Liang, Kan authored
When disabling a PEBS event, we need to drain the buffer. Doing so requires a correct cpuc->pebs_active mask. The current code clears the pebs_active bit before draining the buffer. Fix that. Signed-off-by:
"Liang, Kan" <kan.liang@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver<vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/37D7C6CF3E00A74B8858931C1DB2F07701885A65@SHSMSX103.ccr.corp.intel.com [ Fixed the SOB. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Andy Lutomirski authored
This patch adds an MSR PMU to support free running MSR counters. Such as time and freq related counters includes TSC, IA32_APERF, IA32_MPERF and IA32_PPERF, but also SMI_COUNT. The events are exposed in sysfs for use by perf stat and other tools. The files are under /sys/devices/msr/events/ Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Kan Liang authored
The uncore subsystem for Broadwell-DE is similar to Haswell-EP. There are some differences in pci device IDs, box number and constraints. Please refer to the public document: http://www.intel.com/content/www/us/en/processors/xeon/xeon-d-1500-uncore-performance-monitoring.htmlSigned-off-by:
-
Andi Kleen authored
The next patch adds a new perf extra register where 0x1ff is not a valid value. Use 0x11 instead. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Andi Kleen authored
merge_attr() allows to merge two sysfs attribute tables. Export it to be usable by other files too. Next patch is going to use that to extend the sysfs format attributes for a CPU. Signed-off-by:
-
Andi Kleen authored
In callstack mode the LBR is not a ring buffer, but a stack that grows up and down. This means in this case we don't need to access all LBRs, only the ones up to TOS. Do this optimization for the normal LBR read, and the context switch save/restore code. For save/restore it can be done unconditionally, as it only runs when call stack mode is active. This recovers some of the cost of going to 32 LBRs on Skylake. Signed-off-by:
-
Andi Kleen authored
Use the correct index to save/restore the LBR_INFO_x MSR in callstack mode. This is more a cleanup, as even with the wrong index the register was correctly saved/restored, and also LBR callgraph mode in perf tools do not really need anything in LBR_INFO. But still better to use the right index. Signed-off-by:
-
Andi Kleen authored
Add perf core PMU support for future Intel Skylake CPU cores. The code is based on Haswell/Broadwell. There is a new cache event list, based on the updated Haswell event list. Skylake has removed most counter constraints on basic events, so the basic constraints table now only has a single entry (plus the fixed counters). TSX support and various other setups are all shared with Haswell. Skylake has 32 LBR entries. Add a new LBR init function to set this up. The filters are all the same as Haswell. It also has a new LBR format with a separate LBR_INFO_* MSR, but that has been already added earlier. Signed-off-by:
-
Andi Kleen authored
In Arch perfmon v4 the GLOBAL_STATUS reset automatically unfreezes LBRs. So no need to do it manually in the LBR code. Add a check to skip it. v2: Move test up to beginning of function. Signed-off-by:
-
Andi Kleen authored
With Arch Perfmon v4 the PMU ack unfreezes the LBRs. So we need to do the PMU ack after the LBR reading, otherwise the LBRs would be polluted by the PMI handler. This is a minimal change. In principle the ACK could be moved much later. Signed-off-by:
-
Andi Kleen authored
ArchPerfmon v4 has some new status bits in GLOBAL_STATUS. These need to be ignored when deciding whether a NMI was an NMI, to avoid eating all NMIs when they stay set, see: b292d7a1 ("perf/x86/intel: ignore CondChgd bit to avoid false NMI handling") This patch ignores the new ASIF bit, which indicates that SGX interfered with the PMU, and also the new LBR freezing bits, which are set when the LBRs get frozen, plus the existing CondChange (set by JTAG debuggers and some buggy BIOSes) Signed-off-by: -
Andi Kleen authored
Add support for the new LBRv5 format used on Intel Skylake CPUs. The flags for mispredict, abort, in_tx etc. moved to range of separate LBR_INFO_* MSRs. Teach the LBR code to read those. The original LBR registers stay the same, except they have full sign extension now. LBR_INFO also reports a cycle count to the last branch. Report the cycle information using the new "cycles" branch_info output field. In addition we have to context switch and clear the new INFO MSRs to avoid any information leaks. Signed-off-by:
-
Andi Kleen authored
Intel Skylake supports reporting the time in cycles a branch in the LBR took, to give a rough indication of the basic block performance. Export the cycle information in the branch_info structure. This can be done by just reusing some currently zero padding. This is just the generic header change. The architecture still needs to fill it in. There's no attempt to convert to real time, as we really want cycles here. Signed-off-by:
-
Andi Kleen authored
Add new MSRs (LBR_INFO) and some new MSR bits used by the Intel Skylake PMU driver. Signed-off-by:
-
Andi Kleen authored
With PEBSv3 the PEBS record contains a time stamp. That means we can allow free-running PEBS without a PMI even if the user program requested a time stamp. This avoids the need to use -T to get free running PEBS, and also avoids any problems with mis-identifying MMAPs later. Move the free_running_flags state into a variable in x86_pmu and use it. This only works when no explicit clock_id is set. Signed-off-by:
-
Andi Kleen authored
PEBSv3 is the same as the existing PEBSv2 used on Haswell, but it adds a new TSC field. Add support to the generic PEBS handler to handle the new format, and overwrite the perf time stamp using the new native_sched_clock_from_tsc(). Right now the time stamp is just slightly more accurate, as it is nearer the actual event trigger point. With the PEBS threshold > 1 patchkit it will be much more accurate, avoid the problems with MMAP mismatches earlier. The accurate time stamping is only implemented for the default trace clock for now. v2: Use _skl prefix. Check for default clock_id. Signed-off-by:
-
Andi Kleen authored
PEBSv3 has a raw TSC time stamp in its memory buffer that later needs to to be converted to perf_clock. Add a native_sched_clock_from_tsc() that works the same as native_sched_clock(), but starts with an already given TSC value. Paravirt is ignored, it will just get the native clock. But there isn't a para virtualized PEBS anyway. Signed-off-by:
-
Alexander Shishkin authored
Intel PT chapter in the new Intel Architecture SDM adds several packets corresponding enable bits and registers that control packet generation. Also, additional bits in the Intel PT CPUID leaf were added to enumerate presence and parameters of these new packets and features. The packets and enables are: * CYC: cycle accurate mode, provides the number of cycles elapsed since previous CYC packet; its presence and available threshold values are enumerated via CPUID; * MTC: mini time counter packets, used for tracking TSC time between full TSC packets; its presence and available resolution options are enumerated via CPUID; * PSB packet period is now configurable, available period values are enumerated via CPUID. This patch adds corresponding bit and register definitions, pmu driver capabilities based on CPUID enumeration, new attribute format bits for the new featurens and extends event configuration validation function to take these into account. Signed-off-by:Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Alexander Shishkin authored
Currently, the PT driver zeroes out the status register every time before starting the event. However, all the writable bits are already taken care of in pt_handle_status() function, except the new PacketByteCnt field, which in new versions of PT contains the number of packet bytes written since the last sync (PSB) packet. Zeroing it out before enabling PT forces a sync packet to be written. This means that, with the existing code, a sync packet (PSB and PSBEND, 18 bytes in total) will be generated every time a PT event is scheduled in. To avoid these unnecessary syncs and save a WRMSR in the fast path, this patch changes the default behavior to not clear PacketByteCnt field, so that the sync packets will be generated with the period specified as "psb_period" attribute config field. This has little impact on the trace data as the other packets that are normally sent within PSB+ (between PSB and PSBEND) have their own generation scenarios which do not depend on the sync packets. One exception where we do need to force PSB like this when tracing starts, so that the decoder has a clear sync point in the trace. For this purpose we aready have hw::itrace_started flag, which we are currently using to output PERF_RECORD_ITRACE_START. This patch moves setting itrace_started from perf core to the pmu::start, where it should still be 0 on the very first run. Signed-off-by:
-
Andy Lutomirski authored
The check looked wrong, although I think it was actually safe. TASK_SIZE is unnecessarily small for compat tasks, and it wasn't possible to make a range breakpoint so large it started in user space and ended in kernel space. Nonetheless, let's fix up the check for the benefit of future readers. A breakpoint is in the kernel if either end is in the kernel. Signed-off-by:
-
Andy Lutomirski authored
Range breakpoints will do the wrong thing if the address isn't aligned. While we're there, add comments about why it's safe for instruction breakpoints. Signed-off-by:
-
Andy Lutomirski authored
Code on the kprobe blacklist doesn't want unexpected int3 exceptions. It probably doesn't want unexpected debug exceptions either. Be safe: disallow breakpoints in nokprobes code. On non-CONFIG_KPROBES kernels, there is no kprobe blacklist. In that case, disallow kernel breakpoints entirely. It will be particularly important to keep hw breakpoints out of the entry and NMI code once we move debug exceptions off the IST stack. Signed-off-by:
-
Kan Liang authored
AVG_LATENCY(bit 38) is only available on MSR_OFFCORE_RSP0. So the bit should be removed from RSP1 valid_mask. Since RSP0 and RSP1 may have different valid_mask, intel_alt_er should validate the config on the alternate offcore reg before replacing it. Signed-off-by:
-
Alexander Shishkin authored
The x86_lbr_exclusive commit (48070342 "perf/x86: Mark Intel PT and LBR/BTS as mutually exclusive") mistakenly moved intel_pmu_needs_lbr_smpl() to perf_event.h, while another commit (a46a2300 "perf: Simplify the branch stack check") removed it in favor of needs_branch_stack(). This patch gets rid of intel_pmu_needs_lbr_smpl() for good. Signed-off-by:
-
Alexander Shishkin authored
Both intel_pmu_enable_bts() and intel_pmu_disable_bts() are in perf_event.h header file, no need to have them declared again in the driver. Signed-off-by:
-
Andi Kleen authored
Haswell and Broadwell have the same uncore CBOX/ARB PMU as Sandy Bridge. Add the respective model numbers to enable the SNB uncore PMU. Signed-off-by:
-
Andi Kleen authored
Add a new "ARB" uncore PMU that is used to monitor the uncore queue arbiter. This is useful to measure uncore queue occupancy and similar statistics. The registers all have the same format as the existing CBOX PMU. Also move the event constraints from the CBOX to ARB. The 0x80+ events are ARB events and cannot be scheduled on a CBOX PMU. Signed-off-by:
-
Vaishali Thakkar authored
The DEFINE_PCI_DEVICE_TABLE() macro is deprecated. Use 'struct pci_device_id' instead of DEFINE_PCI_DEVICE_TABLE(), with the goal of getting rid of this macro completely. This Coccinelle semantic patch performs this transformation: @@ identifier a; declarer name DEFINE_PCI_DEVICE_TABLE; initializer i; @@ - DEFINE_PCI_DEVICE_TABLE(a) + const struct pci_device_id a[] = i; Signed-off-by:
Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by:
-
Dasaratharaman Chandramouli authored
Knights Landing DRAM RAPL supports PKG and DRAM RAPL domains. DRAM RAPL has a different fixed energy unit (2^-16J) similar to that of HSW. Signed-off-by:
Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by:
Stephane Eranian <eranian@google.com> Acked-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jacob Pan Jun <jacob.jun.pan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nikhil Rao <nikhil.rao@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/aa63b4a3af3160152fea1a10c807f4200527280c.1432665809.git.dasaratharaman.chandramouli@intel.comSigned-off-by:
-
- 31 Jul, 2015 11 commits
-
-
Oleg Nesterov authored
The xol_free_insn_slot()->waitqueue_active() check is buggy. We need mb() after we set the conditon for wait_event(), or xol_take_insn_slot() can miss the wakeup. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pratyush Anand <panand@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134036.GA4799@redhat.comSigned-off-by:
-
Oleg Nesterov authored
Change xol_add_vma() to use _install_special_mapping(), this way we can name the vma installed by uprobes. Currently it looks like private anonymous mapping, this is confusing and complicates the debugging. With this change /proc/$pid/maps reports "[uprobes]". As a side effect this will cause core dumps to include the XOL vma and I think this is good; this can help to debug the problem if the app crashed because it was probed. Signed-off-by:
-
Oleg Nesterov authored
install_special_mapping(pages) expects that "pages" is the zero- terminated array while xol_add_vma() passes &area->page, this means that special_mapping_fault() can wrongly use the next member in xol_area (vaddr) as "struct page *". Fortunately, this area is not expandable so pgoff != 0 isn't possible (modulo bugs in special_mapping_vmops), but still this does not look good. Signed-off-by:
-
Oleg Nesterov authored
The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by:Pratyush Anand <panand@redhat.com> Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.comSigned-off-by:
-
Oleg Nesterov authored
arch/x86 doesn't care (so far), but as Pratyush Anand pointed out other architectures might want why arch_uretprobe_is_alive() was called and use different checks depending on the context. Add the new argument to distinguish 2 callers. Tested-by:
-
Oleg Nesterov authored
Change prepare_uretprobe() to flush the !arch_uretprobe_is_alive() return_instance's. This is not needed correctness-wise, but can help to avoid the failure caused by MAX_URETPROBE_DEPTH. Note: in this case arch_uretprobe_is_alive() can be false positive, the stack can grow after longjmp(). Unfortunately, the kernel can't 100% solve this problem, but see the next patch. Tested-by:
-
Oleg Nesterov authored
Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; void func_2(void) { longjmp(jmp, 1); } void func_1(void) { if (setjmp(jmp)) return; func_2(); printf("ERR!! I am running on the caller's stack\n"); } int main(void) { func_1(); return 0; } fails if you probe func_1() and func_2() because handle_trampoline() assumes that the probed function should must return and hit the bp installed be prepare_uretprobe(). But in this case func_2() does not return, so when func_1() returns the kernel uses the no longer valid return_instance of func_2(). Change handle_trampoline() to unwind ->return_instances until we know that the next chain is alive or NULL, this ensures that the current chain is the last we need to report and free. Alternatively, every return_instance could use unique trampoline_vaddr, in this case we could use it as a key. And this could solve the problem with sigaltstack() automatically. But this approach needs more changes, and it puts the "hard" limit on MAX_URETPROBE_DEPTH. Plus it can not solve another problem partially fixed by the next patch. Note: this change has no effect on !x86, the arch-agnostic version of arch_uretprobe_is_alive() just returns "true". TODO: as documented by the previous change, arch_uretprobe_is_alive() can be fooled by sigaltstack/etc. Tested-by: -
Oleg Nesterov authored
Add the x86 specific version of arch_uretprobe_is_alive() helper. It returns true if the stack frame mangled by prepare_uretprobe() is still on stack. So if it returns false, we know that the probed function has already returned. We add the new return_instance->stack member and change the generic code to initialize it in prepare_uretprobe, but it should be equally useful for other architectures. TODO: this assumes that the probed application can't use multiple stacks (say sigaltstack). We will try to improve this logic later. Tested-by: -
Oleg Nesterov authored
Add the new "weak" helper, arch_uretprobe_is_alive(), used by the next patches. It should return true if this return_instance is still valid. The arch agnostic version just always returns true. The patch exports "struct return_instance" for the architectures which want to override this hook. We can also cleanup prepare_uretprobe() if we pass the new return_instance to arch_uretprobe_hijack_return_addr(). Tested-by:
-
Oleg Nesterov authored
No functional changes, preparation. Add the new helper, find_next_ret_chain(), which finds the first !chained entry and returns its ->next. Yes, it is suboptimal. We probably want to turn ->chained into ->start_of_this_chain pointer and avoid another loop. But this needs the boring changes in dup_utask(), so lets do this later. Change the main loop in handle_trampoline() to unwind the stack until ri is equal to the pointer returned by this new helper. Tested-by:
-
Oleg Nesterov authored
Turn the last pr_warn() in uprobes.c into uprobe_warn(). While at it: - s/kzalloc/kmalloc, we initialize every member of 'ri' - remove the pointless comment above the obvious code Tested-by:
-
