- 16 Dec, 2021 6 commits
-
-
Matthew Brost authored
Let's be paranoid and kick the G2H tasklet, which dequeues messages, if G2H credits are exhausted. Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Matthew Brost authored
Print CT state (H2G + G2H head / tail pointers, credits) on CT deadlock. v2: (John Harrison) - Add units to debug messages Reviewed-by:
-
John Harrison authored
While attempting to debug a CT deadlock issue in various CI failures (most easily reproduced with gem_ctx_create/basic-files), I was seeing CPU deadlock errors being reported. This were because the context destroy loop was blocking waiting on H2G space from inside an IRQ spinlock. There no was deadlock as such, it's just that the H2G queue was full of context destroy commands and GuC was taking a long time to process them. However, the kernel was seeing the large amount of time spent inside the IRQ lock as a dead CPU. Various Bad Things(tm) would then happen (heartbeat failures, CT deadlock errors, outstanding H2G WARNs, etc.). Re-working the loop to only acquire the spinlock around the list management (which is all it is meant to protect) rather than the entire destroy operation seems to fix all the above issues. v2: (John Harrison) - Fix typo in comment message Signed-off-by:
-
Matthew Brost authored
A full GT reset can race with the last context put resulting in the context ref count being zero but the destroyed bit not yet being set. Remove GEM_BUG_ON in scrub_guc_desc_for_outstanding_g2h that asserts the destroyed bit must be set in ref count is zero. Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Matthew Brost authored
Previously assigned whole guc_id structure (list, spin lock) which is incorrect, only assign the guc_id.id. Fixes: 0f797650 ("drm/i915/guc: Rework and simplify locking") Signed-off-by:
-
Matthew Brost authored
s/ce/cn/ when grabbing guc_state.lock before calling clr_context_registered. Fixes: 0f797650 ("drm/i915/guc: Rework and simplify locking") Signed-off-by:
-
- 14 Dec, 2021 6 commits
-
-
Lucas De Marchi authored
PAT can be disabled on boot with "nopat" in the command line. Replace one x86-ism with another, which is slightly more correct to prepare for supporting other architectures. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211202003048.1015511-1-lucas.demarchi@intel.com
-
Matthew Auld authored
We have a debugfs hook to directly call into i915_gem_shrink() with the fs_reclaim acquire annotations to simulate hitting direct reclaim. However we should also annotate this with memalloc_noreclaim, which will set PF_MEMALLOC for us on the current context, to ensure we can't re-enter direct reclaim(just like "real" direct reclaim does). This is an issue now that ttm_bo_validate could potentially be called here, which might try to allocate a tiny amount of memory to hold the new ttm_resource struct, as per the below splat: [ 2507.913844] WARNING: possible recursive locking detected [ 2507.913848] 5.16.0-rc4+ #5 Tainted: G U [ 2507.913853] -------------------------------------------- [ 2507.913856] gem_exec_captur/1825 is trying to acquire lock: [ 2507.913861] ffffffffb9df2500 (fs_reclaim){..}-{0:0}, at: kmem_cache_alloc_trace+0x30/0x390 [ 2507.913875] but task is already holding lock: [ 2507.913879] ffffffffb9df2500 (fs_reclaim){..}-{0:0}, at: i915_drop_caches_set+0x1c9/0x2c0 [i915] [ 2507.913962] other info that might help us debug this: [ 2507.913966] Possible unsafe locking scenario: [ 2507.913970] CPU0 [ 2507.913973] ---- [ 2507.913975] lock(fs_reclaim); [ 2507.913979] lock(fs_reclaim); [ 2507.913983] DEADLOCK *** [ 2507.913988] May be due to missing lock nesting notation [ 2507.913992] 4 locks held by gem_exec_captur/1825: [ 2507.913997] #0: ffff888101f6e460 (sb_writers#17){..}-{0:0}, at: ksys_write+0xe9/0x1b0 [ 2507.914009] #1: ffff88812d99e2b8 (&attr->mutex){..}-{3:3}, at: simple_attr_write+0xbb/0x220 [ 2507.914019] #2: ffffffffb9df2500 (fs_reclaim){..}-{0:0}, at: i915_drop_caches_set+0x1c9/0x2c0 [i915] [ 2507.914085] #3: ffff8881b4a11b20 (reservation_ww_class_mutex){..}-{3:3}, at: ww_mutex_trylock+0x43f/0xcb0 [ 2507.914097] stack backtrace: [ 2507.914102] CPU: 0 PID: 1825 Comm: gem_exec_captur Tainted: G U 5.16.0-rc4+ #5 [ 2507.914109] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [ 2507.914115] Call Trace: [ 2507.914118] <TASK> [ 2507.914121] dump_stack_lvl+0x59/0x73 [ 2507.914128] __lock_acquire.cold+0x227/0x3b0 [ 2507.914135] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 2507.914141] ? __lock_acquire+0x23ca/0x5000 [ 2507.914147] lock_acquire+0x19c/0x4b0 [ 2507.914152] ? kmem_cache_alloc_trace+0x30/0x390 [ 2507.914157] ? lock_release+0x690/0x690 [ 2507.914163] ? lock_is_held_type+0xe4/0x140 [ 2507.914170] ? ttm_sys_man_alloc+0x47/0xb0 [ttm] [ 2507.914178] fs_reclaim_acquire+0x11a/0x160 [ 2507.914183] ? kmem_cache_alloc_trace+0x30/0x390 [ 2507.914188] kmem_cache_alloc_trace+0x30/0x390 [ 2507.914192] ? lock_release+0x37f/0x690 [ 2507.914198] ttm_sys_man_alloc+0x47/0xb0 [ttm] [ 2507.914206] ttm_bo_pipeline_gutting+0x70/0x440 [ttm] [ 2507.914214] ? ttm_mem_io_free+0x150/0x150 [ttm] [ 2507.914221] ? lock_is_held_type+0xe4/0x140 [ 2507.914227] ttm_bo_validate+0x2fb/0x370 [ttm] [ 2507.914234] ? lock_acquire+0x19c/0x4b0 [ 2507.914239] ? ttm_bo_bounce_temp_buffer.constprop.0+0xf0/0xf0 [ttm] [ 2507.914246] ? lock_acquire+0x131/0x4b0 [ 2507.914251] ? lock_is_held_type+0xe4/0x140 [ 2507.914257] i915_ttm_shrinker_release_pages+0x2bc/0x490 [i915] [ 2507.914339] ? i915_ttm_swap_notify+0x130/0x130 [i915] [ 2507.914429] ? i915_gem_object_release_mmap_offset+0x32/0x250 [i915] [ 2507.914529] i915_gem_shrink+0xb14/0x1290 [i915] [ 2507.914616] ? ___i915_gem_object_make_shrinkable+0x3e0/0x3e0 [i915] [ 2507.914698] ? _raw_spin_unlock_irqrestore+0x2d/0x60 [ 2507.914705] ? track_intel_runtime_pm_wakeref+0x180/0x230 [i915] [ 2507.914777] i915_gem_shrink_all+0x4b/0x70 [i915] [ 2507.914857] i915_drop_caches_set+0x227/0x2c0 [i915] Reported-by:Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
-
Robert Beckett authored
ttm->num_pages is uint32_t which was causing very large buffers to only populate a truncated size. This fixes gem_create@create-clear igt test on large memory systems. Fixes: 7ae03459 ("drm/i915/ttm: add tt shmem backend") Signed-off-by:
Robert Beckett <bob.beckett@collabora.com> Reviewed-by:
-
Chris Wilson authored
This extends the previous sanitychecking of device memory to read/write all the memory on the device during the device probe, ala memtest86, as an optional module parameter: i915.memtest=1. This is not expected to be fast, but a reasonably thorough verfification that the device memory is accessible and doesn't return bit errors. v2: Rebased. Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211208153404.27546-4-ramalingam.c@intel.com
-
Chris Wilson authored
As we setup the memory regions for the device, give each a quick test to verify that we can read and write to the full iomem range. This ensures that our physical addressing for the device's memory is correct, and some reassurance that the memory is functional. v2: wrapper for memtest [Chris] v3: Removed the unused ptr i915 [Chris] v4: used the %pa for the resource_size_t. Signed-off-by:
-
Chris Wilson authored
Remove the portion of stolen memory reserved for private use from driver access. Signed-off-by:
-
- 13 Dec, 2021 6 commits
-
-
Thomas Hellström authored
When we recently converted the capture code to use vma snapshots, we forgot to free the struct i915_capture_list list items after use. Fix that by bringing back a kfree. Fixes: ff20afc4 ("drm/i915: Update error capture code to avoid using the current vma state") Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Some of the newer HW will use bigger RSA keys to authenticate the GuC binary. On those platforms the HW will read the key from memory instead of the RSA registers, so we need to copy it in a dedicated vma, like we do for the HuC. The address of the key is provided to the HW via the first RSA register. v2: clarify that the RSA behavior is hardcoded in the bootrom (Matt) Signed-off-by:
-
Michal Wajdeczko authored
Future GuC/HuC firmwares might be signed with different key sizes. Don't assume that it must be always 2048 bits long. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
The FAILURE state of uc_fw currently implies that the fw is loadable (i.e init completed), so we can't use it for init failures and instead need a dedicated error code. Note that this currently does not cause any issues because if we fail to init any of the firmwares we abort the load, but better be accurate anyway in case things change in the future. Signed-off-by:
-
Thomas Hellström authored
When updating the error capture code and introducing vma snapshots, we introduced code to hold the vma in memory while capturing it, calling i915_active_acquire_if_busy(). Now that function isn't relevant for perma-pinned vmas and caused important vmas to be dropped from the coredump. Like for example the GuC log. Fix this by instead requiring those vmas to be pinned while capturing. Tested by running the initial subtests of the gem_exec_capture igt test with GuC submission enabled and verifying that a GuC log blob appears in the output. Fixes: ff20afc4 ("drm/i915: Update error capture code to avoid using the current vma state") Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reported-by:
-
Sebastian Andrzej Siewior authored
This is a revert of commits d6773926 ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe") 6c69a454 ("drm/i915/gt: Mark context->active_count as protected by timeline->mutex") 6dcb85a0 ("drm/i915: Hold irq-off for the entire fake lock period") The existing code leads to a different behaviour depending on whether lockdep is enabled or not. Any following lock that is acquired without disabling interrupts (but needs to) will not be noticed by lockdep. This it not just a lockdep annotation but is used but an actual mutex_t that is properly used as a lock but in case of __timeline_mark_lock() lockdep is only told that it is acquired but no lock has been acquired. It appears that its purpose is just satisfy the lockdep_assert_held() check in intel_context_mark_active(). The other problem with disabling interrupts is that on PREEMPT_RT interrupts are also disabled which leads to problems for instance later during memory allocation. Add a CONTEXT_IS_PARKING bit to intel_engine_cs and set_bit/clear_bit it instead of mutex_acquire/mutex_release. Use test_bit in the two identified spots which relied on the lockdep annotation. Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
- 11 Dec, 2021 2 commits
-
-
John Harrison authored
If the GuC has failed to load for any reason and then the user pokes the debugfs GuC log interface, a BUG and/or null pointer deref can occur. Don't let that happen. Signed-off-by:
-
John Harrison authored
It is possible for platforms to require GuC but not HuC firmware. Also, the firmware versions for GuC and HuC advance independently. So split the macros up to allow the lists to be maintained separately. Signed-off-by:
-
- 09 Dec, 2021 6 commits
-
-
Umesh Nerlige Ramappa authored
GuC PMU busyness gets gt wakeref if awake, but fails to release the wakeref if a reset is in progress. Release the wakeref if it was acquried successfully. v2: Simplify the fix (Ashutosh) Fixes: 2a67b18e ("drm/i915/pmu: Fix synchronization of PMU callback with reset") Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Umesh Nerlige Ramappa authored
live_engine_busy_stats waits for busyness to start ticking before sampling busyness for the test sample duration. The wait accesses an MMIO register and the uncore call to read it takes up to 3 ms in the worst case. This can result in the wait timing out since the MMIO read itself consumes up the timeout of 500us. Increase the timeout to a larger value of 10ms to account for the MMIO read time. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4536 Fixes: 77cdd054 ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by:
-
Matthew Auld authored
If the device needs 64K minimum GTT pages for device local-memory, like on XEHPSDV, then we need to fail the allocation if we can't meet it, instead of falling back to 4K pages, otherwise we can't safely support the insertion of device local-memory pages for this vm, since the HW expects the correct physical alignment and size for every PTE, if we mark the page-table as 64K GTT mode. v2: s/userpsace/userspace [Thomas] Signed-off-by:
-
Matthew Auld authored
On some platforms the hw has dropped support for 4K GTT pages when dealing with LMEM, and due to the design of 64K GTT pages in the hw, we can only mark the *entire* page-table as operating in 64K GTT mode, since the enable bit is still on the pde, and not the pte. And since we we still need to allow 4K GTT pages for SMEM objects, we can't have a "normal" 4K page-table with scratch pointing to LMEM, since that's undefined from the hw pov. The simplest solution is to just move the 64K scratch page to SMEM on such platforms and call it a day, since that should work for all configurations. Signed-off-by:
-
Matthew Auld authored
Conditionally allocate LMEM with 64K granularity, since 4K page support for LMEM will be dropped on some platforms when using the PPGTT. v2: updated commit msg [Thomas] Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
-
Stuart Summers authored
Add a new platform flag, has_64k_pages, to mark the requirement of 64K GTT page sizes or larger for device local memory access. Also implies that we require or at least support the compact PT layout for the ppGTT when using 64K GTT pages. v2: More explanation for the flag [Thomas] Signed-off-by:
-
- 08 Dec, 2021 5 commits
-
-
Tejas Upadhyay authored
We need a way to reset engines by their reset domains. This change sets up way to fetch reset domains of each engine globally. Changes since V1: - Use static reset domain array - Ville and Tvrtko - Use BUG_ON at appropriate place - Tvrtko Signed-off-by:
Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Matthew Auld authored
Ensure we account for any object rounding due to min_page_size restrictions. Signed-off-by:
-
Matthew Auld authored
No need to insert PTEs for the PTE window itself, also foreach expects a length not an end offset, which could be gigantic here with a second engine. Signed-off-by:
-
Matthew Auld authored
Ensure we add the engine base only after we calculate the qword offset into the PTE window. Signed-off-by:
-
Matthew Auld authored
The scratch page might not be allocated in LMEM(like on DG2), so instead of using that as the deciding factor for where the paging structures live, let's just query the pt before mapping it. Signed-off-by:
-
- 07 Dec, 2021 2 commits
-
-
Bruce Chang authored
Follow up on below commit, to increase the timeout further on new platforms, to accomodate the additional time required for the completion of guc submissions for numerous requests created in loop. commit 5e076529 Author: Matthew Brost <matthew.brost@intel.com> Date: Mon Jul 26 20:17:03 2021 -0700 drm/i915/selftests: Increase timeout in i915_gem_contexts selftests Signed-off-by:
Bruce Chang <yu.bruce.chang@intel.com> Reviewed-by:
-
Michael Cheng authored
Certain functions within i915 uses macros that are defined for specific architectures by the mmu, such as _PAGE_RW and _PAGE_PRESENT (Some architectures don't even have these macros defined, like ARM64). Instead of re-using bits defined for the CPU, we should use bits defined for i915. This patch introduces two new 64 bit macros, GEN8_PAGE_PRESENT and GEN8_PAGE_RW, to check for bits 0 and 1 and, to replace all occurrences of _PAGE_RW and _PAGE_PRESENT within i915. v2(Michael Cheng): Use GEN8_ instead of I915_ Signed-off-by:
Michael Cheng <michael.cheng@intel.com> Reviewed-by:
-
- 03 Dec, 2021 4 commits
-
-
Dan Carpenter authored
Originally "out_fence" was set using out_fence = sync_file_create() but which returns NULL, but now it is set with out_fence = eb_requests_create() which returns error pointers. The error path needs to be modified to avoid an Oops in the "goto err_request;" path. Fixes: 544460c3 ("drm/i915: Multi-BB execbuf") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Raviteja Goud Talla authored
Bspec page says "Reset: BUS", Accordingly moving w/a's: Wa_1407352427,Wa_1406680159 to proper function icl_gt_workarounds_init() Which will resolve guc enabling error v2: - Previous patch rev2 was created by email client which caused the Build failure, This v2 is to resolve the previous broken series Reviewed-by:Raviteja Goud Talla <ravitejax.goud.talla@intel.com> Signed-off-by:
-
Ramalingam C authored
Invalidate IC cache through pipe control command as part of the ctx restore flow through indirect ctx pointer. v2: - Move pipe control from xcs indirect context to the rcs indirect context. We'll eventually need this on the CCS engines too, but support for those hasn't landed yet. Cc: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211116174818.2128062-5-matthew.d.roper@intel.com
-
Matt Roper authored
Coarse power gating for render should not be enabled on some DG2 steppings. Bspec: 52698 Signed-off-by:
-
- 01 Dec, 2021 3 commits
-
-
José Roberto de Souza authored
Those two workarounds needs to be implemented in UMD, KMD only needs to whitelist the registers, so here only adding the workaround number to facilitate future workaroud table checks. Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119140931.32791-2-jose.souza@intel.com
-
José Roberto de Souza authored
This workarounds are causing hangs, because I missed the fact that it needs to be enabled for all cases and disabled when doing a resolve pass. So KMD only needs to whitelist it and UMD will be the one setting it on per case. This reverts commit 28ec02c9. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4145Signed-off-by:
-
Thomas Hellström authored
With asynchronous migrations, the vma state may be several migrations ahead of the state that matches the request we're capturing. Address that by introducing an i915_vma_snapshot structure that can be used to snapshot relevant state at request submission. In order to make sure we access the correct memory, the snapshots take references on relevant sg-tables and memory regions. Also move the capture list allocation out of the fence signaling critical path and use the CONFIG_DRM_I915_CAPTURE_ERROR define to avoid compiling in members and functions used for error capture when they're not used. Finally, Introduce lockdep annotation. v4: - Break out the capture allocation mode change to a separate patch. v5: - Fix compilation error in the !CONFIG_DRM_I915_CAPTURE_ERROR case (kernel test robot) v6: - Use #if IS_ENABLED() instead of #ifdef to match driver style. - Move yet another change of allocation mode to the separate patch. - Commit message rework due to patch reordering. v7: - Adjust for removal of region refcounting. Signed-off-by:
-
