bnxt_ptp_init() calls bnxt_ptp_init_rtc() which will acquire the ptp_lock
spinlock.  The spinlock is not initialized until later.  Move the
bnxt_ptp_init_rtc() call after the spinlock is initialized.

Fixes: 24ac1ecd ("bnxt_en: Add driver support to use Real Time Counter for PTP")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_open() can fail in this code path, especially on a VF when
it fails to reserve default rings:

bnxt_open()
  __bnxt_open_nic()
    bnxt_clear_int_mode()
    bnxt_init_dflt_ring_mode()

RX rings would be set to 0 when we hit this error path.

It is possible for a subsequent bnxt_open() call to potentially succeed
with a code path like this:

bnxt_open()
  bnxt_hwrm_if_change()
    bnxt_fw_init_one()
      bnxt_fw_init_one_p3()
        bnxt_set_dflt_rfs()
          bnxt_rfs_capable()
            bnxt_hwrm_reserve_rings()

On older chips, RFS is capable if we can reserve the number of vnics that
is equal to RX rings + 1.  But since RX rings is still set to 0 in this
code path, we may mistakenly think that RFS is supported for 0 RX rings.

Later, when the default RX rings are reserved and we try to enable
RFS, it would fail and cause bnxt_open() to fail unnecessarily.

We fix this in 2 places.  bnxt_rfs_capable() will always return false if
RX rings is not yet set.  bnxt_init_dflt_ring_mode() will call
bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not
supported.

Fixes: 20d7d1c5 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC
LAN911x Ethernet chip, so the networking on them must have been broken by
commit 965b2aa7 ("net/smsc911x: fix irq resource allocation failure")
which filtered out 0 as well as the negative error codes -- it was kinda
correct at the time, as platform_get_irq() could return 0 on of_irq_get()
failure and on the actual 0 in an IRQ resource.  This issue was fixed by
me (back in 2016!), so we should be able to fix this driver to allow IRQ0
usage again...

When merging this to the stable kernels, make sure you also merge commit
e330b9a6 ("platform: don't return 0 from platform_get_irq[_byname]()
on error") -- that's my fix to platform_get_irq() for the DT platforms...

Fixes: 965b2aa7 ("net/smsc911x: fix irq resource allocation failure")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.

This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.

Change from v1: removal of erroneous return statment (Andrew Lunn)
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot is reporting use-after-free read in tcp_retransmit_timer() [1],
for TCP socket used by RDS is accessing sock_net() without acquiring a
refcount on net namespace. Since TCP's retransmission can happen after
a process which created net namespace terminated, we need to explicitly
acquire a refcount.

Link: https://syzkaller.appspot.com/bug?extid=694120e1002c117747ed [1]
Reported-by: syzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com>
Fixes: 26abe143 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Fixes: 8a681736 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/a5fb1fc4-2284-3359-f6a0-e4e390239d7b@I-love.SAKURA.ne.jpSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The program uses CLOCK_TAI as default clock since it was added to the
Linux repo. In commit:
| 04080634 ("selftests/net: so_txtime multi-host support")
a help text stating the wrong default clock was added.

This patch fixes the help text.

Fixes: 04080634 ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-3-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This patch fixes the parsing of the cmd line supplied start time on 32
bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot
hold a timestamp in nano second resolution.

Fixes: 04080634 ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-2-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.

When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.

Fix this by taking br1 down and bringing it back up when it is fully
configured.

With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).

Fixes: 239e754a ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Radhey Shyam Pandey says:

====================
emaclite: improve error handling and minor cleanup

This patchset does error handling for of_address_to_resource() and also
removes "Don't advertise 1000BASE-T" and auto negotiation.

Changes for v3:
- Resolve git apply conflicts for 2/2 patch.

Changes for v2:
- Added Andrew's reviewed by tag in 1/2 patch.
- Move ret to down to align with reverse xmas tree style in 2/2 patch.
- Also add fixes tag in 2/2 patch.
- Specify tree name in subject prefix.
====================

Link: https://lore.kernel.org/r/1651476470-23904-1-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

check the return value of of_address_to_resource() and also add
missing of_node_put() for np and npp nodes.

Fixes: e0a3bc65 ("net: emaclite: Support multiple phys connected to one MDIO bus")
Addresses-Coverity: Event check_return value.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Convert B53 to use phylink_pcs for the serdes rather than hooking it
into the MAC-layer callbacks.

Fixes: 81c1681c ("net: dsa: b53: mark as non-legacy")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

with the usage of this function in nic_mbx_intr_handler().

Cache the Linux interrupt numbers in struct nicpf and use that cache in the
interrupt handler to select the mailbox.

Fixes: 495c66ac ("genirq/msi: Convert to new functions")
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2041772Signed-off-by: David S. Miller <davem@davemloft.net>

Duoming Zhou says:

====================
Replace improper checks and fix bugs in nfc subsystem

The first patch is used to replace improper checks in netlink related
functions of nfc core, the second patch is used to fix bugs in
nfcmrvl driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are destructive operations such as nfcmrvl_fw_dnld_abort and
gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware,
gpio and so on could be destructed while the upper layer functions such as
nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads
to double-free, use-after-free and null-ptr-deref bugs.

There are three situations that could lead to double-free bugs.

The first situation is shown below:

   (Thread 1)                 |      (Thread 2)
nfcmrvl_fw_dnld_start         |
 ...                          |  nfcmrvl_nci_unregister_dev
 release_firmware()           |   nfcmrvl_fw_dnld_abort
  kfree(fw) //(1)             |    fw_dnld_over
                              |     release_firmware
  ...                         |      kfree(fw) //(2)
                              |     ...

The second situation is shown below:

   (Thread 1)                 |      (Thread 2)
nfcmrvl_fw_dnld_start         |
 ...                          |
 mod_timer                    |
 (wait a time)                |
 fw_dnld_timeout              |  nfcmrvl_nci_unregister_dev
   fw_dnld_over               |   nfcmrvl_fw_dnld_abort
    release_firmware          |    fw_dnld_over
     kfree(fw) //(1)          |     release_firmware
     ...                      |      kfree(fw) //(2)

The third situation is shown below:

       (Thread 1)               |       (Thread 2)
nfcmrvl_nci_recv_frame          |
 if(..->fw_download_in_progress)|
  nfcmrvl_fw_dnld_recv_frame    |
   queue_work                   |
                                |
fw_dnld_rx_work                 | nfcmrvl_nci_unregister_dev
 fw_dnld_over                   |  nfcmrvl_fw_dnld_abort
  release_firmware              |   fw_dnld_over
   kfree(fw) //(1)              |    release_firmware
                                |     kfree(fw) //(2)

The firmware struct is deallocated in position (1) and deallocated
in position (2) again.

The crash trace triggered by POC is like below:

BUG: KASAN: double-free or invalid-free in fw_dnld_over
Call Trace:
  kfree
  fw_dnld_over
  nfcmrvl_nci_unregister_dev
  nci_uart_tty_close
  tty_ldisc_kill
  tty_ldisc_hangup
  __tty_hangup.part.0
  tty_release
  ...

What's more, there are also use-after-free and null-ptr-deref bugs
in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or
set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev,
then, we dereference firmware, gpio or the members of priv->fw_dnld in
nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen.

This patch reorders destructive operations after nci_unregister_device
in order to synchronize between cleanup routine and firmware download
routine.

The nci_unregister_device is well synchronized. If the device is
detaching, the firmware download routine will goto error. If firmware
download routine is executing, nci_unregister_device will wait until
firmware download routine is finished.

Fixes: 3194c687 ("NFC: nfcmrvl: add firmware download support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device_is_registered() in nfc core is used to check whether
nfc device is registered in netlink related functions such as
nfc_fw_download(), nfc_dev_up() and so on. Although device_is_registered()
is protected by device_lock, there is still a race condition between
device_del() and device_is_registered(). The root cause is that
kobject_del() in device_del() is not protected by device_lock.

   (cleanup task)         |     (netlink task)
                          |
nfc_unregister_device     | nfc_fw_download
 device_del               |  device_lock
  ...                     |   if (!device_is_registered)//(1)
  kobject_del//(2)        |   ...
 ...                      |  device_unlock

The device_is_registered() returns the value of state_in_sysfs and
the state_in_sysfs is set to zero in kobject_del(). If we pass check in
position (1), then set zero in position (2). As a result, the check
in position (1) is useless.

This patch uses bool variable instead of device_is_registered() to judge
whether the nfc device is registered, which is well synchronized.

Fixes: 3e256b8f ("NFC: add nfc subsystem core")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation
of Split Header (SPH) feature is not supported for Ipv4 fragmented packet.
This SPH limitation will cause ping failure when the packets size exceed
the MTU size. For example, the issue happens once the basic ping packet
size is larger than the configured MTU size and the data is lost inside
the fragmented packet, replaced by zeros/corrupted values, and leads to
ping fail.

So, disable the Split Header for Intel platforms.

v2: Add fixes tag in commit message.

Fixes: 67afd6d1("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Ong, Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whenever RCU protected list replaces an object,
the pointer to the new object needs to be updated
_before_ the call to kfree_rcu() or call_rcu()

Also ip6_mc_msfilter() needs to update the pointer
before releasing the mc_lock mutex.

Note that linux-5.13 was supporting kfree_rcu(NULL, rcu),
so this fix does not need the conditional test I was
forced to use in the equivalent patch for IPv4.

Fixes: 882ba1f7 ("mld: convert ipv6_mc_socklist->sflist to RCU")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported an UAF in ip_mc_sf_allow() [1]

Whenever RCU protected list replaces an object,
the pointer to the new object needs to be updated
_before_ the call to kfree_rcu() or call_rcu()

Because kfree_rcu(ptr, rcu) got support for NULL ptr
only recently in commit 12edff04 ("rcu: Make kfree_rcu()
ignore NULL pointers"), I chose to use the conditional
to make sure stable backports won't miss this detail.

if (psl)
    kfree_rcu(psl, rcu);

net/ipv6/mcast.c has similar issues, addressed in a separate patch.

[1]
BUG: KASAN: use-after-free in ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655
Read of size 4 at addr ffff88807d37b904 by task syz-executor.5/908

CPU: 0 PID: 908 Comm: syz-executor.5 Not tainted 5.18.0-rc4-syzkaller-00064-g8f4dd166 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
 print_report mm/kasan/report.c:429 [inline]
 kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
 ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655
 raw_v4_input net/ipv4/raw.c:190 [inline]
 raw_local_deliver+0x4d1/0xbe0 net/ipv4/raw.c:218
 ip_protocol_deliver_rcu+0xcf/0xb30 net/ipv4/ip_input.c:193
 ip_local_deliver_finish+0x2ee/0x4c0 net/ipv4/ip_input.c:233
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ip_local_deliver+0x1b3/0x200 net/ipv4/ip_input.c:254
 dst_input include/net/dst.h:461 [inline]
 ip_rcv_finish+0x1cb/0x2f0 net/ipv4/ip_input.c:437
 NF_HOOK include/linux/netfilter.h:307 [inline]
 NF_HOOK include/linux/netfilter.h:301 [inline]
 ip_rcv+0xaa/0xd0 net/ipv4/ip_input.c:556
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519
 netif_receive_skb_internal net/core/dev.c:5605 [inline]
 netif_receive_skb+0x13e/0x8e0 net/core/dev.c:5664
 tun_rx_batched.isra.0+0x460/0x720 drivers/net/tun.c:1534
 tun_get_user+0x28b7/0x3e30 drivers/net/tun.c:1985
 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2015
 call_write_iter include/linux/fs.h:2050 [inline]
 new_sync_write+0x38a/0x560 fs/read_write.c:504
 vfs_write+0x7c0/0xac0 fs/read_write.c:591
 ksys_write+0x127/0x250 fs/read_write.c:644
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f3f12c3bbff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 99 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 cc fd ff ff 48
RSP: 002b:00007f3f13ea9130 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f3f12d9bf60 RCX: 00007f3f12c3bbff
RDX: 0000000000000036 RSI: 0000000020002ac0 RDI: 00000000000000c8
RBP: 00007f3f12ce308d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000036 R11: 0000000000000293 R12: 0000000000000000
R13: 00007fffb68dd79f R14: 00007f3f13ea9300 R15: 0000000000022000
 </TASK>

Allocated by task 908:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:436 [inline]
 ____kasan_kmalloc mm/kasan/common.c:515 [inline]
 ____kasan_kmalloc mm/kasan/common.c:474 [inline]
 __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524
 kasan_kmalloc include/linux/kasan.h:234 [inline]
 __do_kmalloc mm/slab.c:3710 [inline]
 __kmalloc+0x209/0x4d0 mm/slab.c:3719
 kmalloc include/linux/slab.h:586 [inline]
 sock_kmalloc net/core/sock.c:2501 [inline]
 sock_kmalloc+0xb5/0x100 net/core/sock.c:2492
 ip_mc_source+0xba2/0x1100 net/ipv4/igmp.c:2392
 do_ip_setsockopt net/ipv4/ip_sockglue.c:1296 [inline]
 ip_setsockopt+0x2312/0x3ab0 net/ipv4/ip_sockglue.c:1432
 raw_setsockopt+0x274/0x2c0 net/ipv4/raw.c:861
 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 753:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free+0x13d/0x180 mm/kasan/common.c:328
 kasan_slab_free include/linux/kasan.h:200 [inline]
 __cache_free mm/slab.c:3439 [inline]
 kmem_cache_free_bulk+0x69/0x460 mm/slab.c:3774
 kfree_bulk include/linux/slab.h:437 [inline]
 kfree_rcu_work+0x51c/0xa10 kernel/rcu/tree.c:3318
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298

Last potentially related work creation:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 __kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348
 kvfree_call_rcu+0x74/0x990 kernel/rcu/tree.c:3595
 ip_mc_msfilter+0x712/0xb60 net/ipv4/igmp.c:2510
 do_ip_setsockopt net/ipv4/ip_sockglue.c:1257 [inline]
 ip_setsockopt+0x32e1/0x3ab0 net/ipv4/ip_sockglue.c:1432
 raw_setsockopt+0x274/0x2c0 net/ipv4/raw.c:861
 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Second to last potentially related work creation:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 __kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348
 call_rcu+0x99/0x790 kernel/rcu/tree.c:3074
 mpls_dev_notify+0x552/0x8a0 net/mpls/af_mpls.c:1656
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:84
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1938
 call_netdevice_notifiers_extack net/core/dev.c:1976 [inline]
 call_netdevice_notifiers net/core/dev.c:1990 [inline]
 unregister_netdevice_many+0x92e/0x1890 net/core/dev.c:10751
 default_device_exit_batch+0x449/0x590 net/core/dev.c:11245
 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298

The buggy address belongs to the object at ffff88807d37b900
 which belongs to the cache kmalloc-64 of size 64
The buggy address is located 4 bytes inside of
 64-byte region [ffff88807d37b900, ffff88807d37b940)

The buggy address belongs to the physical page:
page:ffffea0001f4dec0 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88807d37b180 pfn:0x7d37b
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 ffff888010c41340 ffffea0001c795c8 ffff888010c40200
raw: ffff88807d37b180 ffff88807d37b000 000000010000001f 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x342040(__GFP_IO|__GFP_NOWARN|__GFP_COMP|__GFP_HARDWALL|__GFP_THISNODE), pid 2963, tgid 2963 (udevd), ts 139732238007, free_ts 139730893262
 prep_new_page mm/page_alloc.c:2441 [inline]
 get_page_from_freelist+0xba2/0x3e00 mm/page_alloc.c:4182
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5408
 __alloc_pages_node include/linux/gfp.h:587 [inline]
 kmem_getpages mm/slab.c:1378 [inline]
 cache_grow_begin+0x75/0x350 mm/slab.c:2584
 cache_alloc_refill+0x27f/0x380 mm/slab.c:2957
 ____cache_alloc mm/slab.c:3040 [inline]
 ____cache_alloc mm/slab.c:3023 [inline]
 __do_cache_alloc mm/slab.c:3267 [inline]
 slab_alloc mm/slab.c:3309 [inline]
 __do_kmalloc mm/slab.c:3708 [inline]
 __kmalloc+0x3b3/0x4d0 mm/slab.c:3719
 kmalloc include/linux/slab.h:586 [inline]
 kzalloc include/linux/slab.h:714 [inline]
 tomoyo_encode2.part.0+0xe9/0x3a0 security/tomoyo/realpath.c:45
 tomoyo_encode2 security/tomoyo/realpath.c:31 [inline]
 tomoyo_encode+0x28/0x50 security/tomoyo/realpath.c:80
 tomoyo_realpath_from_path+0x186/0x620 security/tomoyo/realpath.c:288
 tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
 tomoyo_path_perm+0x21b/0x400 security/tomoyo/file.c:822
 security_inode_getattr+0xcf/0x140 security/security.c:1350
 vfs_getattr fs/stat.c:157 [inline]
 vfs_statx+0x16a/0x390 fs/stat.c:232
 vfs_fstatat+0x8c/0xb0 fs/stat.c:255
 __do_sys_newfstatat+0x91/0x110 fs/stat.c:425
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1356 [inline]
 free_pcp_prepare+0x549/0xd20 mm/page_alloc.c:1406
 free_unref_page_prepare mm/page_alloc.c:3328 [inline]
 free_unref_page+0x19/0x6a0 mm/page_alloc.c:3423
 __vunmap+0x85d/0xd30 mm/vmalloc.c:2667
 __vfree+0x3c/0xd0 mm/vmalloc.c:2715
 vfree+0x5a/0x90 mm/vmalloc.c:2746
 __do_replace+0x16b/0x890 net/ipv6/netfilter/ip6_tables.c:1117
 do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline]
 do_ip6t_set_ctl+0x90d/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1026
 tcp_setsockopt+0x136/0x2520 net/ipv4/tcp.c:3696
 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Memory state around the buggy address:
 ffff88807d37b800: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
 ffff88807d37b880: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>ffff88807d37b900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                   ^
 ffff88807d37b980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff88807d37ba00: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc

Fixes: c85bb41e ("igmp: fix ip_mc_sf_allow race [v5]")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

AF_RXRPC doesn't currently enable IPv6 UDP Tx checksums on the transport
socket it opens and the checksums in the packets it generates end up 0.

It probably should also enable IPv6 UDP Rx checksums and IPv4 UDP
checksums.  The latter only seem to be applied if the socket family is
AF_INET and don't seem to apply if it's AF_INET6.  IPv4 packets from an
IPv6 socket seem to have checksums anyway.

What seems to have happened is that the inet_inv_convert_csum() call didn't
get converted to the appropriate udp_port_cfg parameters - and
udp_sock_create() disables checksums unless explicitly told not too.

Fix this by enabling the three udp_port_cfg checksum options.

Fixes: 1a9b86c9 ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Vadim Fedorenko <vfedorenko@novek.ru>
cc: David S. Miller <davem@davemloft.net>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>

'tmp_node' need be put before returning from cpsw_probe_dt(),
so add missing of_node_put() in error path.

Fixes: ed3525ed ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The node pointer returned by of_get_child_by_name() with refcount incremented,
so add of_node_put() after using it.

Fixes: 634db83b ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220428095716.540452-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add of_node_put() if of_get_phy_mode() fails in mt7530_setup()

Fixes: 0c65b2b9 ("net: of_get_phy_mode: Change API to solve int/unit warnings")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220428095317.538829-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch limits the sniffing to only one port during the mirror add.
And during the mirror_del it checks for all the ports using the sniff,
if and only if no other ports are referring, sniffing is disabled.
The code is updated based on the review comments of LAN937x port mirror
patch.

Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210422094257.1641396-8-prasanna.vengateshan@microchip.com/
Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20220428070709.7094-1-arun.ramadoss@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If wq has only one page, we need to check wqe rolling over page by
compare end_idx and curr_idx, and then copy wqe to shadow wqe to
avoid out of bound access.
This work has been done in hinic_get_wqe, but missed for hinic_read_wqe.
This patch fixes it, and removes unnecessary MASKED_WQE_IDX().

Fixes: 7dd29ee1 ("hinic: add sriov feature support")
Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com>
Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com>
Link: https://lore.kernel.org/r/282817b0e1ae2e28fdf3ed8271a04e77f57bf42e.1651148587.git.mqaio@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Error values inside the probe function must be < 0. The ENOMEM return
value has the wrong sign: it is positive instead of negative.
Add a minus sign.

Fixes: e2397567 ("net: mdio: Add BCM6368 MDIO mux bus controller")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220428211931.8130-1-dossche.niels@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The node pointer returned by of_parse_phandle() with refcount incremented,
so add of_node_put() after using it in mtk_sgmii_init().

Fixes: 9ffee4a8 ("net: ethernet: mediatek: Extend SGMII related functions")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220428062543.64883-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Hangbin Liu says:

====================
selftests: net: add missing tests to Makefile

When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile. The missing tests are generated
by command:
$ for f in $(ls *.sh); do grep -q $f Makefile || echo $f; done
====================

Link: https://lore.kernel.org/r/20220428044511.227416-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile, e.g.

  make -C tools/testing/selftests/ install \
  	TARGETS="net/forwarding" INSTALL_PATH=/tmp/kselftests
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile, e.g.

  make -C tools/testing/selftests/ install \
  	TARGETS="net" INSTALL_PATH=/tmp/kselftests
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-5.18-20220429' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-04-29

The first patch is by Oliver Hartkopp and removes the ability to
re-binding bounds sockets from the ISOTP. It turned out to be not
needed and brings unnecessary complexity.

The last 4 patches all target the grcan driver. Duoming Zhou's patch
fixes a potential dead lock in the grcan_close() function. Daniel
Hellstrom's patch fixes the dma_alloc_coherent() to use the correct
device. Andreas Larsson's 1st patch fixes a broken system id check,
the 2nd patch fixes the NAPI poll budget usage.

* tag 'linux-can-fixes-for-5.18-20220429' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: grcan: only use the NAPI poll budget for RX
  can: grcan: grcan_probe(): fix broken system id check for errata workaround needs
  can: grcan: use ofdev->dev when allocating DMA memory
  can: grcan: grcan_close(): fix deadlock
  can: isotp: remove re-binding of bound socket
====================

Link: https://lore.kernel.org/r/20220429125612.1792561-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The previous split budget between TX and RX made it return not using
the entire budget but at the same time not having calling called
napi_complete. This sometimes led to the poll to not be called, and at
the same time having TX and RX interrupts disabled resulting in the
driver getting stuck.

Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Link: https://lore.kernel.org/all/20220429084656.29788-4-andreas@gaisler.com
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The systemid property was checked for in the wrong place of the device
tree and compared to the wrong value.

Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Link: https://lore.kernel.org/all/20220429084656.29788-3-andreas@gaisler.com
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Use the device of the device tree node should be rather than the
device of the struct net_device when allocating DMA buffers.

The driver got away with it on sparc32 until commit 53b7670e
("sparc: factor the dma coherent mapping into helper") after which the
driver oopses.

Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Link: https://lore.kernel.org/all/20220429084656.29788-2-andreas@gaisler.com
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

There are deadlocks caused by del_timer_sync(&priv->hang_timer) and
del_timer_sync(&priv->rr_timer) in grcan_close(), one of the deadlocks
are shown below:

   (Thread 1)              |      (Thread 2)
                           | grcan_reset_timer()
grcan_close()              |  mod_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | grcan_initiate_running_reset()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold priv->lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler also need
priv->lock in position (2) of thread 2. As a result, grcan_close()
will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain the
needed lock.

Link: https://lore.kernel.org/all/20220425042400.66517-1-duoming@zju.edu.cn
Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

As a carry over from the CAN_RAW socket (which allows to change the CAN
interface while mantaining the filter setup) the re-binding of the
CAN_ISOTP socket needs to take care about CAN ID address information and
subscriptions. It turned out that this feature is so limited (e.g. the
sockopts remain fix) that it finally has never been needed/used.

In opposite to the stateless CAN_RAW socket the switching of the CAN ID
subscriptions might additionally lead to an interrupted ongoing PDU
reception. So better remove this unneeded complexity.

Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/20220422082337.1676-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, bpf and netfilter.

  Current release - new code bugs:

   - bridge: switchdev: check br_vlan_group() return value

   - use this_cpu_inc() to increment net->core_stats, fix preempt-rt

  Previous releases - regressions:

   - eth: stmmac: fix write to sgmii_adapter_base

  Previous releases - always broken:

   - netfilter: nf_conntrack_tcp: re-init for syn packets only,
     resolving issues with TCP fastopen

   - tcp: md5: fix incorrect tcp_header_len for incoming connections

   - tcp: fix F-RTO may not work correctly when receiving DSACK

   - tcp: ensure use of most recently sent skb when filling rate samples

   - tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT

   - virtio_net: fix wrong buf address calculation when using xdp

   - xsk: fix forwarding when combining copy mode with busy poll

   - xsk: fix possible crash when multiple sockets are created

   - bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
     bpf_xmit lwt hook

   - sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event

   - wireguard: device: check for metadata_dst with skb_valid_dst()

   - netfilter: update ip6_route_me_harder to consider L3 domain

   - gre: make o_seqno start from 0 in native mode

   - gre: switch o_seqno to atomic to prevent races in collect_md mode

  Misc:

   - add Eric Dumazet to networking maintainers

   - dt: dsa: realtek: remove realtek,rtl8367s string

   - netfilter: flowtable: Remove the empty file"

* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
  tcp: fix F-RTO may not work correctly when receiving DSACK
  Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
  net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
  ixgbe: ensure IPsec VF<->PF compatibility
  MAINTAINERS: Update BNXT entry with firmware files
  netfilter: nft_socket: only do sk lookups when indev is available
  net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
  bnx2x: fix napi API usage sequence
  tls: Skip tls_append_frag on zero copy size
  Add Eric Dumazet to networking maintainers
  netfilter: conntrack: fix udp offload timeout sysctl
  netfilter: nf_conntrack_tcp: re-init for syn packets only
  net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
  net: Use this_cpu_inc() to increment net->core_stats
  Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
  Bluetooth: hci_event: Fix creating hci_conn object on error status
  Bluetooth: hci_event: Fix checking for invalid handle on error status
  ice: fix use-after-free when deinitializing mailbox snapshot
  ice: wait 5 s for EMP reset after firmware flash
  ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
  ...

Pull thermal control fixes from Rafael Wysocki:
 "These take back recent chages that started to confuse users and fix up
  an attr.show callback prototype in a driver.

  Specifics:

   - Stop warning about deprecation of the userspace thermal governor
     and cooling device status interface, because there are cases in
     which user space has to drive thermal management with the help of
     them (Daniel Lezcano)

   - Fix attr.show callback prototype in the int340x thermal driver
     (Kees Cook)"

* tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/governor: Remove deprecated information
  Revert "thermal/core: Deprecate changing cooling device state from userspace"
  thermal: int340x: Fix attr.show callback prototype

Pull power management fixes from Rafael Wysocki:
 "These fix up recent intel_idle driver changes and fix some ARM cpufreq
  driver issues.

  Specifics:

   - Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov,
     Vladimir Zapolskiy).

   - Fix memory leak with the Sun501 driver (Xiaobing Luo).

   - Make intel_idle enable C1E promotion on all CPUs when C1E is
     preferred to C1 (Artem Bityutskiy).

   - Make C6 optimization on Sapphire Rapids added recently work as
     expected if both C1E and C1 are "preferred" (Artem Bityutskiy)"

* tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: Fix SPR C6 optimization
  intel_idle: Fix the 'preferred_cstates' module parameter
  cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
  cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
  cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms
  cpufreq: qcom-hw: provide online/offline operations
  cpufreq: qcom-hw: fix the opp entries refcounting
  cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
  cpufreq: qcom-hw: drop affinity hint before freeing the IRQ

Pull ACPI fixes from Rafael WysockiL
 "These fix up the ACPI processor driver after a change made during the
  5.16 cycle that inadvertently broke falling back to shallower C-states
  when C3 cannot be used.

  Specifics:

   - Make the ACPI processor driver avoid falling back to C3 type of
     C-states when C3 cannot be requested (Ville Syrjälä)

   - Revert a quirk that is not necessary any more after fixing the
     underlying issue properly (Ville Syrjälä)"

* tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40"
  ACPI: processor: idle: Avoid falling back to C3 type C-states