- 12 Dec, 2018 9 commits
-
-
Olof Johansson authored
Merge tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX7D PICO boards update for 4.21: - It contains a series from Otavio Salvador that improves i.MX7D PICO SoM, and then adds Hobbit baseboard support on top of the improvement. * tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7d-pico: Add the imx7d-pico-hobbit variant ARM: dts: imx7d-pico-pi: Extend peripherals support ARM: dts: imx7d-pico: Extend peripherals support ARM: dts: imx7d-pico: Improve WiFi regulator name ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIO ARM: dts: imx7d-pico: Pass the USBOTG1_PWR pinctrl ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsi ARM: dts: imx7d-pico: Switch to SPDX identifier ARM: dts: imx7d-pico: Do not harcode the memory size ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock ARM: imx: update the cpu power up timing setting on i.mx6sx ARM: dts: imx7d-pico: Describe the Wifi clock ARM: dts: imx51-zii-rdu1: Remove EEPROM node Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX device tree update for 4.21: - New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board. - Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature for flexcan, and enable devices on a few i.MX6 NXP boards. - Enable AUO G101EVN010 lcd panel and Goodix touch support for imx6ul-ccimx6ulsbcpro board. - Enable sensors support for imx6qdl-sabresd board: egalax touch, light, magnetometer and accelerometer sensor. - Switch more boards to use SPDX identifier. - Fix memory node duplication in i.MX device tree sources. - Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs. - Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid incorrect device matching. - Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which are now supported by the freedreno driver. - Add DCP device support for i.MX6ULL, which requires explicit clock enabling. - Add '#thermal-sensor-cells' for thermal device and '#cooling-cells' for cooling devices. - Add missing clock information for EPIT on i.MX25 SoC. - Add PWM and qdma devices for LS1021A SoC. - Update cooling maps of LS1021A SoC to include all devices affected by individual trip points. - Random device addition and cleanup on various boards. * tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (82 commits) ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1 ARM: dts: imx6ul: Remove extra space between node name and brace ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators ARM: dts: imx6ul: add flexcan support ARM: dts: imx5: add gpu nodes ARM: dts: imx6qdl-sabresd: add accelerometer sensor support ARM: dts: imx6qdl-sabresd: add magnetometer sensor support ARM: dts: imx6qdl-sabresd: add light sensor support ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus" ARM: dts: imx6qdl: Fix memory node duplication ARM: dts: imx6dl-mamoj: Add a memory node ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication ARM: dts: vf610-zii-scu4-aib: Add HI8435 support ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus ARM: dts: imx7s: Add flexcan stop mode wakeup support ARM: dts: imx6ul: Add flexcan stop mode wakeup support ARM: dts: imx6qdl: Add flexcan stop mode wakeup support ARM: dts: imx6sx: Add flexcan stop mode wakeup support ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variant ARM: dts: imx6ul-pico-hobbit: Extend peripherals support ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'v4.20-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt mt8173: add node for the command queue device * tag 'v4.20-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8173: Add GCE node Signed-off-by:
-
Olof Johansson authored
Merge tag 'samsung-dt64-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DTS ARM64 changes for v4.21 1. Update DWC3 hardware modules to Exynos5433 specific variant. 2. Update cooling maps to include all CPU devices in multiple DTS files. * tag 'samsung-dt64-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add all CPUs in cooling maps arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs Signed-off-by:
-
Olof Johansson authored
Merge tag 'samsung-dt-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DTS ARM changes for v4.21 1. Add missing properties and nodes for PMIC clocks in multiple DTS files. 2. Add UHS-I bus speed support to Odroid XU3/XU4/HC SD card and bump the maximum clock frequency to 200 MHz for SD and eMMC. 3. Update cooling maps to include all CPU devices in multiple DTS files. 4. Enable quirks for Exynos3250 DWC. 5. Add JPEG CODEC node to S5Pv210. 6. Add opp-suspend to devfreq OPPs on Exynos4 boards to fix resuming from suspend to RAM. 7. Remove eDP from Arndale board as it does not work and breaks also DSI. * tag 'samsung-dt-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: remove display-port node from Arndale ARM: dts: exynos: Add opp-suspend to DMC and leftbus devfreq OPPs on Exynos4 ARM: dts: s5pv210: Add s5p-jpeg codec node. ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module ARM: dts: exynos: Add all CPUs in cooling maps ARM: dts: exynos: Clarify comment explaining purpose of Odroid XU3 DTSI ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU3/XU4/HC1 ARM: dts: exynos: Update maximum frequency for eMMC to 200MHz on Odroid XU3/XU4 ARM: dts: exynos: Update maximum frequency for SD card to 200MHz on Odroid XU3/XU4/HC1 ARM: dts: exynos: Fix LDO13 min values on Odroid XU3/XU4/HC1 ARM: dts: exynos: Add UHS-I bus speed support to Odroid XU3/XU4/HC1 ARM: dts: exynos: Add missing clocks to RTC node for Arndale board ARM: dts: exynos: Add compatible for s5m8767 clocks node on Itop Core ARM: dts: exynos: Add compatible for s2mps11 clocks node on Exynos542x Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu dt64 for 4.21 (part 1) - complete the description of the clearfog-gt-8k board (Armada 8040 based board) - declare eMMC on espressobin (Armada 3720 based board) which still need to be enable by the bootloader as it is not present on all the board. - add a new version of the Macchiatobin (Armada 8040 based board): the Single Shot (without the 10G 3310 PHYs). * tag 'mvebu-dt64-4.21-1' of git://git.infradead.org/linux-mvebu: arm64: dts: clearfog-gt-8k: describe mini-PCIe CON2 USB arm64: dts: add support for Macchiatobin Single Shot board arm64: dts: marvell: armada-37xx: Enable emmc on espressobin arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl definition arm64: dts: clearfog-gt-8k: enable mini-PCIe CON2 USB arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal arm64: dts: clearfog-gt-8k: fix USB regulator gpio polarity Signed-off-by:
-
Olof Johansson authored
Merge tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm ARM64 Updates for v4.21 Part 2 * Switch to use dwc3-qcom glue driver on MSM8996 * Fix issue with xo clk name on MSM8998 * Add cooling maps on MSM8916 * Add UART nodes on SDM845 * Add camera subsystem support on MSM8996 and MSM8916 * tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: msm8996: Use dwc3-qcom glue driver for USB arm64: dts: qcom: msm8998: Fixup clock to use xo_board arm64: dts: qcom: sdm845: Add UART nodes arm64: dts: qcom: msm8996: Add CAMSS support arm64: dts: qcom: msm8996: Add VFE SMMU node arm64: dts: qcom: Add pinctrls for camera sensors arm64: dts: qcom: Add Camera Control Interface pinctrls arm64: dts: qcom: msm8916: Add CAMSS support arm64: dts: qcom: msm8916: Add IOMMU sub-node for VFE context bank arm64: dts: msm8916: Add all CPUs in cooling maps Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner arm64 DT changes for 4.21 Our usual set of arm64 DT changes, with the biggest additions being: - Support for the video decoding engine in the A64 - Support for the audio codec in the A64 - USB Support in the H6 - HDMI Support in the H6 - EMAC Support in the H6 - New board: Orange Pi Lite2 * tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits) arm64: dts: allwinner: a64: Fix up RTC device node and clock references arm64: dts: allwinner: a64: Add Video Engine node arm64: dts: allwinner: a64: Add support for the SRAM C1 section arm64: dts: allwinner: a64: pinebook: enable power supplies arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies arm64: dts: allwinner: axp803: add AC and battery power supplies arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec arm64: dts: allwinner: a64: enable sound on Pinebook arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine arm64: dts: allwinner: a64: add nodes necessary for analog sound support arm64: dts: allwinner: h6: orangepi: Add device nodes for LEDs arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 host and OTG ports arm64: dts: allwinner: h6: orangepi: Add board-wide 5V regulator arm64: dts: allwinner: h6: fix EMAC compatible string sequence arm64: dts: allwinner: a64: Add device node for Mali-400 GPU dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali arm64: dts: allwinner: h6: enable USB2 on Pine H64 arm64: dts: allwinner: h6: add USB Vbus regulator for Pine H64 arm64: dts: allwinner: h6: add USB2-related device nodes arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner DT changes for 4.21 This is a quite big pull request this time, with a huge number of changes (and patches) due to us fixing the vast majority of the DTC warnings our DT had. We also have a bunch of other good, more meaningful, changes: - Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5) SoCs - AXP803 PMIC AC Power supply support - Rework of the oscillators tree - Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano Plus a few enhancements here and there. * tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits) ARM: dts: sunxi: Fix PMU compatible strings ARM: dts: sun8i: r40: Add RTC device node ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references ARM: dts: sun8i: a23/a33: Fix up RTC device node ARM: dts: sun8i: r40: Add clock accuracy for external oscillators ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs ARM: dts: sun8i: h3: Remove unnecessary reserved memory node ARM: dts: sun8i: a33: Remove unnecessary reserved memory node ARM: dts: suniv: Add device tree for Lichee Pi Nano ARM: dts: suniv: add initial DTSI file for F1C100s ARM: dts: axp81x: add AC power supply subnode ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses ARM: dts: sun8i: BPI-M2M: Remove i2c nodes ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers ARM: dts: sunxi: reference: Move the muxing back to the common DTSI ... Signed-off-by:
-
- 11 Dec, 2018 8 commits
-
-
Olof Johansson authored
Merge tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt arm64: tegra: Device tree change for v4.21-rc1 These changes add a bunch of features for Tegra194 and Tegra186, such as wake events, on-die RTC, temperature sensors, HDA for audio over HDMI and fan support on Jetson Xavier to allow cooling of the device. * tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (29 commits) arm64: tegra: Set reg property for display-hub on Tegra194 arm64: tegra: Set reg property for display-hub on Tegra186 arm64: dts: tegra186: Enable IOMMU for SDHCI arm64: tegra: Enable HDA controller on Jetson TX1 arm64: tegra: Add CEC controller on Tegra194 arm64: tegra: Enable HDA on Jetson Xavier arm64: tegra: Add HDA controller on Tegra194 arm64: tegra: Add CEC controller on Tegra186 arm64: tegra: Enable HDA on Jetson TX2 arm64: tegra: Add HDA controller on Tegra186 arm64: tegra: Add temperature sensor on P2888 arm64: tegra: Add gpio-keys on Jetson Xavier arm64: tegra: Add AON GPIO controller on Tegra194 arm64: tegra: p2888: Enable on-die RTC arm64: tegra: Add RTC support on Tegra194 arm64: tegra: Enable PMC wake events on Tegra194 arm64: tegra: p3310: Enable on-die RTC arm64: tegra: Add RTC support on Tegra186 arm64: tegra: Enable PMC wake events on Tegra186 arm64: tegra: Fix power key interrupt type on Jetson TX2 ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Device tree changes for v4.21-rc1 These changes add the external memory controller on Tegra20 as well as the VIC on Tegra124. * tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Add VIC on Tegra124 ARM: dts: tegra20: Add clock entry to External Memory Controller ARM: dts: tegra20: Add interrupt entry to External Memory Controller Signed-off-by:
-
Olof Johansson authored
Merge tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt dt-bindings: Changes for v4.21-rc1 This contains a few cleanups of and additions to existing device tree bindings, such as XUSB, EMC, PMC and thermal. * tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: tegra186-pmc: Add interrupt controller properties dt-bindings: thermal: tegra-bpmp: Add Tegra194 support dt: bindings: Move tegra20-emc binding to memory-controllers directory dt: bindings: tegra20-emc: Document clock property dt: bindings: tegra20-emc: Document interrupt property dt-bindings: usb: xhci-tegra: Add power-domain details Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM Based SoC DT Bindings Updates for v4.21 * Move 'renesas,prr' binding to its own document - Prepration for converting board-level bindings to json-schema * Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM * tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board dt-bindings: arm: renesas: Document iWave RZ/G1N SOM Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.21 * RZ/G1N (r8a7744) SoC - Describe in DT: SYS-DMAC, GPIO, Ethernet AVB, SMP, [H]SCIF{A|B}, I2C, USB 2.0 and 3.0 hosts, USB-DMAC, HSUSB, RWDT, Audio, CAN, IRQC, thermal, CMT, VIN, VSP, IPMMU, PMU, TPU, QSPI MSIOF, and PCIE - iWave G20D-Q7 board - Initial support - Enable eMMC, SDHI and SPIO NOR support - Add camera daughterboard * RZ/G1M (r8a7743) SoC - Remove legacy "renesas,rcar-thermal" compatibility * tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits) ARM: dts: r8a7744-iwg20m: Add SPI NOR support ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM ARM: dts: r8a7744: Add PCIe Controller device node ARM: dts: r8a7744: Add xhci support ARM: dts: r8a7744: Add MSIOF[012] support ARM: dts: r8a7744: Add QSPI support ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB ARM: dts: r8a7744: Add TPU support ARM: dts: r8a7744: Add PWM SoC support ARM: dts: r8a7744: Add IPMMU DT nodes ARM: dts: r8a7744: Add VSP support ARM: dts: r8a7744: add VIN dt support ARM: dts: r8a7744: Add CMT SoC specific support ARM: dts: r8a7744: Add thermal device to DT ARM: dts: r8a7744: Add IRQC support ARM: dts: r8a7744: Add CAN support ARM: dts: r8a7744: Add audio support ARM: dts: r8a7744: Add RWDT node ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes ARM: dts: r8a7744: USB 2.0 host support ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM64 Based SoC DT Updates for v4.21 * R-Car D3 (r8a77995) SoC based Draak board - Add the backlight device for the LVDS1 output * R-Car H3 (r8a7795) ES1.0 SoC - Add missing power domains to IPMMU nodes * R-Car M3-N (r8a77965) SoC - Remove non-existent IPMMU-IR * tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a77995: draak: Add backlight arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR Signed-off-by:
-
Olof Johansson authored
Merge tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt ASPEED device tree updates for 4.20 - New machine: Facebook Backpack-CMM BMC and flash layout - OpenPower reference systems (Palmetto P8, Romulus P9) move to the ColdFire based FSI driver - Misc device tree updates from the OpenBMC project * tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add Facebook Backpack-CMM BMC ARM: dts: Add Facebook BMC flash layout ARM: dts: aspeed: wspoon: Enable iio-hwmon battery ARM: dts: aspeed: romulus: Enable iio-hwmon-battery ARM: dts: aspeed: Enable VHUB on Romulus ARM: dts: aspeed-palmetto: Add LPC control node ARM: dts: aspeed: Palmetto system can use coprocessor for FSI ARM: dts: aspeed: Romulus system can use coprocessor for FSI Signed-off-by:
-
https://github.com/rjarzmik/linuxOlof Johansson authored
This device-tree pxa update brings : - various fixes from Daniel (W=12 issues mainly) - support for the first pxa3xx devicetree pxa board * tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux: ARM: dts: pxa3xx: Add Raumfeld DTS files ARM: dts: pxa: clean up USB controller nodes ARM: dts: pxa3xx: clean up pxa3xx clock controller node name ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus ARM: dts: pxa2xx: fix hwuart memory range ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus ARM: dts: pxa3xx: add gcu node Signed-off-by:
-
- 10 Dec, 2018 23 commits
-
-
Fabio Estevam authored
The imx7d-pico-hobbit contains a imx7d-pico SoM and a hobbit baseboard. Add support for it. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Otavio Salvador <otavio@ossystems.com.br> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
This adds following peripherals for the imx7d-pico-pi as: - LED - Touchscreen - GPIO Signed-off-by:
-
Fabio Estevam authored
This extends the peripherals supported by the imx7d-pico.dtsi. It adds: - I2C2 - Flexcan (flexcan1 and flexcan2 ports) - USDHC1 - UART (6 and 7 ports) - PWM (4 ports) - eCSPI3 Signed-off-by:
-
Otavio Salvador authored
There are different models of WiFi being used in the SoM and the handle name was too restrictive. This reworks it to a more generic and meaningful name. Signed-off-by:
-
Fabio Estevam authored
Pass the "phy-reset-gpios" property in order to describe the GPIO that performs the Ethernet PHY reset. Signed-off-by:
-
Fabio Estevam authored
Pass the USBOTG1_PWR pinctrl description in the USBOTG GPIO controlled regulator. Signed-off-by:
-
Fabio Estevam authored
imx7d-pico-pi board contains: - One SoM board (imx7d pico) - One base board (pi). In order to make it easier for adding support for other board variants, move the commom SoM part to the imx7d-pico.dtsi file. Signed-off-by:
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by:
-
Fabio Estevam authored
Currently the memory size described in dts is 2GB, which is incorrect. There are 512MB and 1GB versions of imx7d-pico boards, so remove the hardcoded memory size and let the bootloader pass the correct value to the kernel. Signed-off-by:
-
Shawn Guo authored
i.MX fixes for 4.20, round 3: - A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct the description of the Wifi clock. - Change SW2ISO count to get a safer ARM LDO ramp-up time, so that different boards can be covered. This fixes the ARM LDO failure seen on some customer boards.
-
Andrey Smirnov authored
TPA6130A2 SD pin on RDU1 is not really controlled by SoC and instead is only meant to notify the system that audio was "muted" by external actors. To accommodate that, drop "power-gpio" property of hpa1 node as well as specify a name for that GPIO so that userspace can access it. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Leonard Crestez authored
Fixes: 7d1cd297 ("ARM: dts: imx6ul: add gpmi support") Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
-
Fabio Estevam authored
Passing GPIO_ACTIVE_HIGH as GPIO flags for the GPIO controlled regulator improves the readability, so use it instead of the hardcoded number. Signed-off-by:
-
Dong Aisheng authored
Add flexcan support for i.MX6UL board. Change the place of CAN node delete due to i.MX6ULZ include i.MX6UL dts but not support flexcan. Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Jonathan Marek authored
This adds the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, now supported by the freedreno driver. The compatible for the iMX51 uses a patchid of 1, which is used by drm/msm driver to identify the smaller 128KiB GMEM size. Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Reviewed-by:
-
Anson Huang authored
Add accelerometer sensor mma8451 support on i2c1 bus. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
-
Anson Huang authored
Add magnetometer sensor mag3110 support on i2c3 bus. Signed-off-by:
-
Anson Huang authored
Add isl29023 light sensor support on i2c3 bus, the light sensor's power is controlled by a fixed regulator, since the isl29023 driver and most of other sensors on same board like mag3110 and mma8451 do NOT support regulator operation currently, they are all controlled by this regulator, so this patch also adds the fixed regulator support and make it always on. Signed-off-by:
-
Fabio Estevam authored
It is not recommended to place regulators inside "simple-bus", so move them out to make it cleaner the addition of new regulators. Signed-off-by:
-
Marco Franchi authored
Boards based on imx6qdl have duplicate memory nodes: - One coming from the board device tree file: memory@ - One coming from the imx6qdl.dtsi file. Fix the duplication by removing the memory node from the imx6qdl.dtsi file and by adding 'device_type = "memory";' in the board Device Tree. Converted using the following command: perl -p0777i -e 's/memory\@10000000 \{\n/memory\@10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"`` Reported-by:Rob Herring <robh@kernel.org> Signed-off-by:
Marco Franchi <marco.franchi@nxp.com> Reviewed-by:
-
Fabio Estevam authored
Add a memory node, with an empty memory size, which will be filled by the bootloader. This is done in preparation for removing the memory node from imx6qdl.dtsi. Reported-by:
-
Fabio Estevam authored
imx53-voipac-dmm-668 has two memory nodes, but the correct representation would be to use a single one with two reg entries - one for each RAM chip select, so fix it accordingly. Reported-by:
-
Fabio Estevam authored
On the vf610-zii-scu4-aib board there is a hi8435 (32-channel discrete-to-digital SPI sensor device) in the DSPI0 bus. Add support for it. Signed-off-by:
-
