Skip to content

L
linux
Switch branch/tag
  1. 01 Nov, 2021 4 commits
  3. 30 Oct, 2021 1 commit
  5. 29 Oct, 2021 1 commit
  7. 27 Oct, 2021 13 commits
    • Robin H. Johnson's avatar
      tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together · e531e90b
      Robin H. Johnson authored 
      Running endpoint security solutions like Sentinel1 that use perf-based
tracing heavily lead to this repeated dump complaining about dockerd.
The default value of 2048 is nowhere near not large enough.

Using the prior patch "tracing: show size of requested buffer", we get
"perf buffer not large enough, wanted 6644, have 6144", after repeated
up-sizing (I did 2/4/6/8K). With 8K, the problem doesn't occur at all,
so below is the trace for 6K.

I'm wondering if this value should be selectable at boot time, but this
is a good starting point.

```
------------[ cut here ]------------
perf buffer not large enough, wanted 6644, have 6144
WARNING: CPU: 1 PID: 4997 at kernel/trace/trace_event_perf.c:402 perf_trace_buf_alloc+0x8c/0xa0
Modules linked in: [..]
CPU: 1 PID: 4997 Comm: sh Tainted: G                T 5.13.13-x86_64-00039-gb3959163488e #63
Hardware name: LENOVO 20KH002JUS/20KH002JUS, BIOS N23ET66W (1.41 ) 09/02/2019
RIP: 0010:perf_trace_buf_alloc+0x8c/0xa0
Code: 80 3d 43 97 d0 01 00 74 07 31 c0 5b 5d 41 5c c3 ba 00 18 00 00 89 ee 48 c7 c7 00 82 7d 91 c6 05 25 97 d0 01 01 e8 22 ee bc 00 <0f> 0b 31 c0 eb db 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 55 89
RSP: 0018:ffffb922026b7d58 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9da5ee012000 RCX: 0000000000000027
RDX: ffff9da881657828 RSI: 0000000000000001 RDI: ffff9da881657820
RBP: 00000000000019f4 R08: 0000000000000000 R09: ffffb922026b7b80
R10: ffffb922026b7b78 R11: ffffffff91dda688 R12: 000000000000000f
R13: ffff9da5ee012108 R14: ffff9da8816570a0 R15: ffffb922026b7e30
FS:  00007f420db1a080(0000) GS:ffff9da881640000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 00000002504a8006 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 kprobe_perf_func+0x11e/0x270
 ? do_execveat_common.isra.0+0x1/0x1c0
 ? do_execveat_common.isra.0+0x5/0x1c0
 kprobe_ftrace_handler+0x10e/0x1d0
 0xffffffffc03aa0c8
 ? do_execveat_common.isra.0+0x1/0x1c0
 do_execveat_common.isra.0+0x5/0x1c0
 __x64_sys_execve+0x33/0x40
 do_syscall_64+0x6b/0xc0
 ? do_syscall_64+0x11/0xc0
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f420dc1db37
Code: ff ff 76 e7 f7 d8 64 41 89 00 eb df 0f 1f 80 00 00 00 00 f7 d8 64 41 89 00 eb dc 0f 1f 84 00 00 00 00 00 b8 3b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 01 43 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd4e8b4e38 EFLAGS: 00000246 ORIG_RAX: 000000000000003b
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f420dc1db37
RDX: 0000564338d1e740 RSI: 0000564338d32d50 RDI: 0000564338d28f00
RBP: 0000564338d28f00 R08: 0000564338d32d50 R09: 0000000000000020
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000564338d28f00
R13: 0000564338d32d50 R14: 0000564338d1e740 R15: 0000564338d28c60
---[ end trace 83ab3e8e16275e49 ]---
```

Link: https://lkml.kernel.org/r/20210831043723.13481-2-robbat2@gentoo.orgSigned-off-by: default avatarRobin H. Johnson <robbat2@gentoo.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      e531e90b
    • Robin H. Johnson's avatar
      tracing: Show size of requested perf buffer · a90afe8d
      Robin H. Johnson authored 
      If the perf buffer isn't large enough, provide a hint about how large it
needs to be for whatever is running.

Link: https://lkml.kernel.org/r/20210831043723.13481-1-robbat2@gentoo.orgSigned-off-by: default avatarRobin H. Johnson <robbat2@gentoo.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      a90afe8d
    • Steven Rostedt (VMware)'s avatar
      bootconfig: Initialize ret in xbc_parse_tree() · 39d9c1c1
      Steven Rostedt (VMware) authored 
      The do while loop continues while ret is zero, but ret is never
initialized. The check for ret in the loop at the while should always be
initialized, but if an empty string were to be passed in, q would be NULL
and p would be '\0', and it would break out of the loop without ever
setting ret.

Set ret to zero, and then xbc_verify_tree() would be called and catch that
it is an empty tree and report the proper error.

Link: https://lkml.kernel.org/r/20211027105753.6ab9da5f@gandalf.local.home

Fixes: bdac5c2b ("bootconfig: Allocate xbc_data inside xbc_init()")
Reported-by: default avatarkernel test robot <lkp@intel.com>
Reported-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Acked-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      39d9c1c1
    • 王贇's avatar
      ftrace: do CPU checking after preemption disabled · d33cc657
      王贇 authored 
      With CONFIG_DEBUG_PREEMPT we observed reports like:

  BUG: using smp_processor_id() in preemptible
  caller is perf_ftrace_function_call+0x6f/0x2e0
  CPU: 1 PID: 680 Comm: a.out Not tainted
  Call Trace:
   <TASK>
   dump_stack_lvl+0x8d/0xcf
   check_preemption_disabled+0x104/0x110
   ? optimize_nops.isra.7+0x230/0x230
   ? text_poke_bp_batch+0x9f/0x310
   perf_ftrace_function_call+0x6f/0x2e0
   ...
   __text_poke+0x5/0x620
   text_poke_bp_batch+0x9f/0x310

This telling us the CPU could be changed after task is preempted, and
the checking on CPU before preemption will be invalid.

Since now ftrace_test_recursion_trylock() will help to disable the
preemption, this patch just do the checking after trylock() to address
the issue.

Link: https://lkml.kernel.org/r/54880691-5fe2-33e7-d12f-1fa6136f5183@linux.alibaba.com

CC: Steven Rostedt <rostedt@goodmis.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Reported-by: default avatarAbaci <abaci@linux.alibaba.com>
Signed-off-by: default avatarMichael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      d33cc657
    • 王贇's avatar
      ftrace: disable preemption when recursion locked · ce5e4803
      王贇 authored 
      As the documentation explained, ftrace_test_recursion_trylock()
and ftrace_test_recursion_unlock() were supposed to disable and
enable preemption properly, however currently this work is done
outside of the function, which could be missing by mistake.

And since the internal using of trace_test_and_set_recursion()
and trace_clear_recursion() also require preemption disabled, we
can just merge the logical.

This patch will make sure the preemption has been disabled when
trace_test_and_set_recursion() return bit >= 0, and
trace_clear_recursion() will enable the preemption if previously
enabled.

Link: https://lkml.kernel.org/r/13bde807-779c-aa4c-0672-20515ae365ea@linux.alibaba.com

CC: Petr Mladek <pmladek@suse.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Miroslav Benes <mbenes@suse.cz>
Reported-by: default avatarAbaci <abaci@linux.alibaba.com>
Suggested-by: default avatarPeter Zijlstra <peterz@infradead.org>
Signed-off-by: default avatarMichael Wang <yun.wang@linux.alibaba.com>
[ Removed extra line in comment - SDR ]
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      ce5e4803
    • Kalesh Singh's avatar
      tracing/histogram: Document expression arithmetic and constants · 2d2f6d4b
      Kalesh Singh authored 
      Histogram expressions now support division, and multiplication in
addition to the already supported subtraction and addition operators.

Numeric constants can also be used in a hist trigger expressions
or assigned to a variable and used by refernce in an expression.

Link: https://lkml.kernel.org/r/20211025200852.3002369-9-kaleshsingh@google.comSigned-off-by: default avatarKalesh Singh <kaleshsingh@google.com>
Reviewed-by: default avatarNamhyung Kim <namhyung@kernel.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      2d2f6d4b
    • Kalesh Singh's avatar
      tracing/histogram: Optimize division by a power of 2 · 722eddaa
      Kalesh Singh authored 
      The division is a slow operation. If the divisor is a power of 2, use a
shift instead.

Results were obtained using Android's version of perf (simpleperf[1]) as
described below:

1. hist_field_div() is modified to call 2 test functions:
   test_hist_field_div_[not]_optimized(); passing them the
   same args. Use noinline and volatile to ensure these are
   not optimized out by the compiler.
2. Create a hist event trigger that uses division:
      events/kmem/rss_stat$ echo 'hist:keys=common_pid:x=size/<divisor>'
         >> trigger
      events/kmem/rss_stat$ echo 'hist:keys=common_pid:vals=$x'
         >> trigger
3. Run Android's lmkd_test[2] to generate rss_stat events, and
   record CPU samples with Android's simpleperf:
      simpleperf record -a --exclude-perf --post-unwind=yes -m 16384 -g
         -f 2000 -o perf.data

== Results ==

Divisor is a power of 2 (divisor == 32):

   test_hist_field_div_not_optimized  | 8,717,091 cpu-cycles
   test_hist_field_div_optimized      | 1,643,137 cpu-cycles

If the divisor is a power of 2, the optimized version is ~5.3x faster.

Divisor is not a power of 2 (divisor == 33):

   test_hist_field_div_not_optimized  | 4,444,324 cpu-cycles
   test_hist_field_div_optimized      | 5,497,958 cpu-cycles

If the divisor is not a power of 2, as expected, the optimized version is
slightly slower (~24% slower).

[1] https://android.googlesource.com/platform/system/extras/+/master/simpleperf/doc/README.md
[2] https://cs.android.com/android/platform/superproject/+/master:system/memory/lmkd/tests/lmkd_test.cpp

Link: https://lkml.kernel.org/r/20211025200852.3002369-7-kaleshsingh@google.comSigned-off-by: default avatarKalesh Singh <kaleshsingh@google.com>
Suggested-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      722eddaa
    • Kalesh Singh's avatar
      tracing/histogram: Covert expr to const if both operands are constants · f47716b7
      Kalesh Singh authored 
      If both operands of a hist trigger expression are constants, convert the
expression to a constant. This optimization avoids having to perform the
same calculation multiple times and also saves on memory since the
merged constants are represented by a single struct hist_field instead
or multiple.

Link: https://lkml.kernel.org/r/20211025200852.3002369-6-kaleshsingh@google.comSigned-off-by: default avatarKalesh Singh <kaleshsingh@google.com>
Suggested-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      f47716b7
    • Kalesh Singh's avatar
      tracing/histogram: Simplify handling of .sym-offset in expressions · c5eac6ee
      Kalesh Singh authored 
      The '-' in .sym-offset can confuse the hist trigger arithmetic
expression parsing. Simplify the handling of this by replacing the
'sym-offset' with 'symXoffset'. This allows us to correctly evaluate
expressions where the user may have inadvertently added a .sym-offset
modifier to one of the operands in an expression, instead of bailing
out. In this case the .sym-offset has no effect on the evaluation of the
expression. The only valid use of the .sym-offset is as a hist key
modifier.

Link: https://lkml.kernel.org/r/20211025200852.3002369-5-kaleshsingh@google.comSigned-off-by: default avatarKalesh Singh <kaleshsingh@google.com>
Suggested-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      c5eac6ee
    • Kalesh Singh's avatar
      tracing: Fix operator precedence for hist triggers expression · 9710b2f3
      Kalesh Singh authored 
      The current histogram expression evaluation logic evaluates the
expression from right to left. This can lead to incorrect results
if the operations are not associative (as is the case for subtraction
and, the now added, division operators).
	e.g. 16-8-4-2 should be 2 not 10 --> 16-8-4-2 = ((16-8)-4)-2
	     64/8/4/2 should be 1 not 16 --> 64/8/4/2 = ((64/8)/4)/2

Division and multiplication are currently limited to single operation
expression due to operator precedence support not yet implemented.

Rework the expression parsing to support the correct evaluation of
expressions containing operators of different precedences; and fix
the associativity error by evaluating expressions with operators of
the same precedence from left to right.

Examples:
        (1) echo 'hist:keys=common_pid:a=8,b=4,c=2,d=1,w=$a-$b-$c-$d' \
                  >> event/trigger
        (2) echo 'hist:keys=common_pid:x=$a/$b/3/2' >> event/trigger
        (3) echo 'hist:keys=common_pid:y=$a+10/$c*1024' >> event/trigger
        (4) echo 'hist:keys=common_pid:z=$a/$b+$c*$d' >> event/trigger

Link: https://lkml.kernel.org/r/20211025200852.3002369-4-kaleshsingh@google.comSigned-off-by: default avatarKalesh Singh <kaleshsingh@google.com>
Reviewed-by: default avatarNamhyung Kim <namhyung@kernel.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      9710b2f3
    • Kalesh Singh's avatar
      tracing: Add division and multiplication support for hist triggers · bcef0441
      Kalesh Singh authored 
      Adds basic support for division and multiplication operations for
hist trigger variable expressions.

For simplicity this patch only supports, division and multiplication
for a single operation expression (e.g. x=$a/$b), as currently
expressions are always evaluated right to left. This can lead to some
incorrect results:

	e.g. echo 'hist:keys=common_pid:x=8-4-2' >> event/trigger

	     8-4-2 should evaluate to 2 i.e. (8-4)-2
	     but currently x evaluate to  6 i.e. 8-(4-2)

Multiplication and division in sub-expressions will work correctly, once
correct operator precedence support is added (See next patch in this
series).

For the undefined case of division by 0, the histogram expression
evaluates to (u64)(-1). Since this cannot be detected when the
expression is created, it is the responsibility of the user to be
aware and account for this possibility.

Examples:
	echo 'hist:keys=common_pid:a=8,b=4,x=$a/$b' \
                   >> event/trigger

	echo 'hist:keys=common_pid:y=5*$b' \
                   >> event/trigger

Link: https://lkml.kernel.org/r/20211025200852.3002369-3-kaleshsingh@google.comSigned-off-by: default avatarKalesh Singh <kaleshsingh@google.com>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      bcef0441
    • Kalesh Singh's avatar
      tracing: Add support for creating hist trigger variables from literal · 52cfb373
      Kalesh Singh authored 
      Currently hist trigger expressions don't support the use of numeric
literals:
	e.g. echo 'hist:keys=common_pid:x=$y-1234'
		--> is not valid expression syntax

Having the ability to use numeric constants in hist triggers supports
a wider range of expressions for creating variables.

Add support for creating trace event histogram variables from numeric
literals.

	e.g. echo 'hist:keys=common_pid:x=1234,y=size-1024' >> event/trigger

A negative numeric constant is created, using unary minus operator
(parentheses are required).

	e.g. echo 'hist:keys=common_pid:z=-(2)' >> event/trigger

Constants can be used with division/multiplication (added in the
next patch in this series) to implement granularity filters for frequent
trace events. For instance we can limit emitting the rss_stat
trace event to when there is a 512KB cross over in the rss size:

  # Create a synthetic event to monitor instead of the high frequency
  # rss_stat event
  echo 'rss_stat_throttled unsigned int mm_id; unsigned int curr;
	int member; long size' >> tracing/synthetic_events

  # Create a hist trigger that emits the synthetic rss_stat_throttled
  # event only when the rss size crosses a 512KB boundary.
  echo 'hist:keys=keys=mm_id,member:bucket=size/0x80000:onchange($bucket)
      .rss_stat_throttled(mm_id,curr,member,size)'
        >> events/kmem/rss_stat/trigger

A use case for using constants with addition/subtraction is not yet
known, but for completeness the use of constants are supported for all
operators.

Link: https://lkml.kernel.org/r/20211025200852.3002369-2-kaleshsingh@google.comSigned-off-by: default avatarKalesh Singh <kaleshsingh@google.com>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      52cfb373
    • Masami Hiramatsu's avatar
      selftests/ftrace: Stop tracing while reading the trace file by default · 25b95138
      Masami Hiramatsu authored 
      Stop tracing while reading the trace file by default, to prevent
the test results while checking it and to avoid taking a long time
to check the result.
If there is any testcase which wants to test the tracing while reading
the trace file, please override this setting inside the test case.

This also recovers the pause-on-trace when clean it up.

Link: https://lkml.kernel.org/r/163529053143.690749.15365238954175942026.stgit@devnote2Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      25b95138
  9. 26 Oct, 2021 17 commits
  11. 22 Oct, 2021 4 commits
    • Masami Hiramatsu's avatar
      ARM: Recover kretprobe modified return address in stacktrace · fed240d9
      Masami Hiramatsu authored 
      Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, arm unwinder shows it
instead of the correct return address.

This finds the correct return address from the per-task
kretprobe_instances list and verify it is in between the
caller fp and callee fp.

Note that this supports both GCC and clang if CONFIG_FRAME_POINTER=y
and CONFIG_ARM_UNWIND=n. For the ARM unwinder, this is still
not working correctly.
Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      fed240d9
    • Masami Hiramatsu's avatar
      ARM: kprobes: Make a frame pointer on __kretprobe_trampoline · 7e9bf33b
      Masami Hiramatsu authored 
      Currently kretprobe on ARM just fills r0-r11 of pt_regs, but
that is not enough for the stacktrace. Moreover, from the user
kretprobe handler, stacktrace needs a frame pointer on the
__kretprobe_trampoline.

This adds a frame pointer on __kretprobe_trampoline for both gcc
and clang case. Those have different frame pointer so we need
different but similar stack on pt_regs.

Gcc makes the frame pointer (fp) to point the 'pc' address of
the {fp, ip (=sp), lr, pc}, this means {r11, r13, r14, r15}.
Thus if we save the r11 (fp) on pt_regs->r12, we can make this
set on the end of pt_regs.

On the other hand, Clang makes the frame pointer to point the
'fp' address of {fp, lr} on stack. Since the next to the
pt_regs->lr is pt_regs->sp, I reused the pair of pt_regs->fp
and pt_regs->ip.
So this stores the 'lr' on pt_regs->ip and make the fp to point
pt_regs->fp.

For both cases, saves __kretprobe_trampoline address to
pt_regs->lr, so that the stack tracer can identify this frame
pointer has been made by the __kretprobe_trampoline.

Note that if the CONFIG_FRAME_POINTER is not set, this keeps
fp as is.
Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      7e9bf33b
    • Masami Hiramatsu's avatar
      ARM: clang: Do not rely on lr register for stacktrace · b3ea5d56
      Masami Hiramatsu authored 
      Currently the stacktrace on clang compiled arm kernel uses the 'lr'
register to find the first frame address from pt_regs. However, that
is wrong after calling another function, because the 'lr' register
is used by 'bl' instruction and never be recovered.

As same as gcc arm kernel, directly use the frame pointer (r11) of
the pt_regs to find the first frame address.

Note that this fixes kretprobe stacktrace issue only with
CONFIG_UNWINDER_FRAME_POINTER=y. For the CONFIG_UNWINDER_ARM,
we need another fix.
Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      b3ea5d56
    • Masami Hiramatsu's avatar
      arm64: Recover kretprobe modified return address in stacktrace · cd9bc2c9
      Masami Hiramatsu authored 
      Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, stack unwinder shows it
instead of the correct return address.

This checks whether the next return address is the
__kretprobe_trampoline(), and if so, try to find the correct
return address from the kretprobe instance list. For this purpose
this adds 'kr_cur' loop cursor to memorize the current kretprobe
instance.

With this fix, now arm64 can enable
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE, and pass the
kprobe self tests.
Signed-off-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: default avatarWill Deacon <will@kernel.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      cd9bc2c9
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7