Use the standard print API with dev_*() instead of the old house-baked
one.  It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-4-tiwai@suse.de

Use the standard print API with dev_*() instead of the old house-baked
one.  It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-3-tiwai@suse.de

Use the standard print API with dev_*() instead of the old house-baked
one.  It gives better information and allows dynamically control of
debug prints.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807133452.9424-2-tiwai@suse.de

The recent extension added a new ALSA sequencer port info flag bit
SNDRV_SEQ_PORT_FLG_IS_MIDI1, but it's not reported back when
inquired.  Fix it to report properly.

Fixes: 0079c9d1 ("ALSA: ump: Handle MIDI 1.0 Function Block in MIDI 2.0 protocol")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-7-tiwai@suse.de

When a sequencer port assigned to a UMP Group that is specific to MIDI
1.0 among MIDI 2.0 client, mark it explicitly in the proc output, so
that user can see it easily.  This is an exceptional case where the
message isn't converted to MIDI 1.0 even if the client is running in
MIDI 2.0 mode.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-6-tiwai@suse.de

When a FB is created from a GTB instead of UMP FB Info inquiry, we
missed the update of the corresponding UMP Group attributes.
Export the call of updater and let it be called from the USB driver.

Fixes: 0642a3c5 ("ALSA: ump: Update substream name from assigned FB names")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-5-tiwai@suse.de

When a MIDI 1.0 protocol is specified in a GTB entry while others are
set in MIDI 2.0, it should be seen as a legacy MIDI 1.0 port.  Since
recently we allow drivers to set a flag SNDRV_UMP_BLOCK_IS_MIDI1 to a
FB for that purpose.  This patch tries to set that flag when the
device shows such a configuration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-4-tiwai@suse.de

It's valid to give different protocols via multiple GTBs; e.g. a MIDI
1.0 port is embedded in a MIDI 2.0 device that talks with MIDI 2.0
protocol.  However, the current driver implementation assumes only a
single protocol over the whole Endpoint, and it can't handle such a
scenario.

This patch changes the driver's behavior to parse GTBs to accept
multiple protocols.  Instead of switching to the last given protocol,
it adds the protocol capability bits now.  Meanwhile, the default
protocol is chosen by the first given protocol in GTBs.

Practically seen, this should be a minor issue, as new devices should
specify the protocols properly via UMP Endpoint Info messages, so this
is rather just covering a corner case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-3-tiwai@suse.de

When the protocol capability bits are changed via Endpoint Info update
notification, we should check the validity of the current protocol and
reset it if needed, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-2-tiwai@suse.de

For an invalid input value that is out of the given range, currently
USB-audio driver corrects the value silently and accepts without
errors.  This is no wrong behavior, per se, but the recent kselftest
rather wants to have an error in such a case, hence a different
behavior is expected now.

This patch adds a sanity check at each control put for the standard
mixer types and returns an error if an invalid value is given.

Note that this covers only the standard mixer types.  The mixer quirks
that have own control callbacks would need different coverage.

Link: https://patch.msgid.link/20240806124651.28203-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The UMP v1.1 spec says in the section 6.2.1:
"If a UMP Endpoint declares MIDI 2.0 Protocol but a Function Block
represents a MIDI 1.0 connection, then may optionally be used for
messages to/from that Function Block."

It implies that the driver can (and should) keep MIDI 1.0 CVM
exceptionally for those FBs even if UMP Endpoint is running in MIDI
2.0 protocol, and the current driver lacks of it.

This patch extends the sequencer port info to indicate a MIDI 1.0
port, and tries to send/receive MIDI 1.0 CVM as is when this port is
the source or sink.  The sequencer port flag is set by the driver at
parsing FBs and GTBs although application can set it to its own
user-space clients, too.

Link: https://patch.msgid.link/20240806070024.14301-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

We already have snd_pcm_direction_name(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plqvk51y.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We already have snd_pcm_direction_name(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r0bbk528.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We already have snd_pcm_direction_name(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sevrk52f.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We already have snd_pcm_direction_name(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ttg7k52k.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We already have snd_pcm_direction_name(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v80nk52q.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent changes in IOMMU made the non-contiguous page allocations
as default, hence we can simply use the standard DMA allocation for
the S/G pages as well.  In this patch, we simplify the code by trying
the standard DMA allocation at first, instead of
dma_alloc_noncontiguous().

For the case without IOMMU, we still need to manage the S/G pages
manually, so we keep the same fallback routines like before.

The fallback types (SNDRV_DMA_TYPE_DEV_SG_FALLBACK & co) are dropped /
folded into SNDRV_DMA_TYPE_DEV_SG and co now.  The allocation via the
standard DMA call overrides the type accordingly, hence we don't have
to have extra fallback types any longer.  OTOH, SNDRV_DMA_TYPE_DEV_SG
is no longer an alias but became its own type back again.

Note that this patch requires another prerequisite fix for memmalloc
helper to use the DMA API for WC pages on x86.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240801064808.31205-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The memalloc helper used a house-made code for allocation of WC pages
on x86, since the standard DMA API doesn't cover it well.  Meanwhile,
the manually allocated pages won't work together with IOMMU, resulting
in faults, so we should switch to the DMA API in that case, instead.

This patch tries to switch back to DMA API for WC pages on x86, but
with some additional tweaks that are missing.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240801064808.31205-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

One snd_power_unref() was forgotten and left at __snd_ctl_elem_info()
in the previous change for reorganizing the locking order.

Fixes: fcc62b19 ("ALSA: control: Take power_ref lock primarily")
Link: https://github.com/thesofproject/linux/pull/5127
Link: https://patch.msgid.link/20240801064203.30284-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The code path for kcontrol accesses have often nested locks of both
card's controls_rwsem and power_ref, and applies in that order.
However, what could take much longer is the latter, power_ref; it
waits for the power state of the device, and it pretty much depends on
the user's action.

This patch swaps the locking order of those locks to a more natural
way, namely, power_ref -> controls_rwsem, in order to shorten the time
of possible nested locks.  For consistency, power_ref is taken always
in the top-level caller side (that is, *_user() functions and the
ioctl handler itself).

Link: https://patch.msgid.link/20240729160659.4516-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

We want sometimes to keep the runtime PM disabled persistently just
like we did for the PM deny-list in the previous change, e.g. for
testing some buggy device.  This patch enhances the existing
pm_blacklist option for achieving it easily.

The default behavior doesn't change -- the driver looks up the deny
list and disables the runtime PM if matches.  However, when
pm_blacklist=1 option is set, now the driver disables the runtime PM
completely, just like the deny-list does.

Update the documentation for this option, too.

Link: https://patch.msgid.link/20240729141519.18398-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

We have a runtime PM deny-list for the devices that show the problems
(typically click noises) at runtime suspend/resume, and when it
matches, the driver disables the default runtime PM.  However, we
still allow the runtime PM changed via power_save module option
dynamically, and the desktop system often tweaks it.  This ended up
with a re-enablement of the runtime PM that surprises users, suddenly
suffering from the noises.

This patch changes the driver behavior slightly: when the device is
listed in the deny-list, ignore the power_save option change and keep
the original (that is, off) runtime PM state.

Link: https://patch.msgid.link/20240729141519.18398-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

We had a nice name scheme in ALSA sequencer UMP binding for each
sequencer port referring to each assigned Function Block name, while
the legacy rawmidi refers only to the UMP Endpoint name.  It's better
to align both.

This patch moves the UMP Group attribute update functions into the
core UMP code from the sequencer binding code, and improve the
substream name of the legacy rawmidi.

Link: https://patch.msgid.link/20240729141315.18253-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

struct snd_kcontrol contains a flex array of snd_kcontrol_volatile
objects at its end, and the array size is stored in count field.
This can be annotated gracefully with __counted_by() for catching
possible array overflows.

One additional change is the order of the count field initialization;
The assignment of the count field is moved before assignment of vd[]
elements for avoiding false-positive warnings from compilers.

Link: https://patch.msgid.link/20240726152840.8629-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull 6.11-devel branch for further development.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST fixes combo jack detection and
limits the internal microphone boost that causes clipping on this model.
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240728123601.144017-1-mavchatz@protonmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix RPM package build error caused by an incorrect locale setup

 - Mark modules.weakdep as ghost in RPM package

 - Fix the odd combination of -S and -c in stack protector scripts,
   which is an error with the latest Clang

* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Fix '-S -c' in x86 stack protector scripts
  kbuild: rpm-pkg: ghost modules.weakdep file
  kbuild: rpm-pkg: Fix C locale setup

This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.

That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.

Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3a7e02c0 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.

The complexity of those macros stems from two issues:

 (a) trying to use them in situations that require a C constant
     expression (in static initializers and for array sizes)

 (b) the type sanity checking

and MIN_T/MAX_T avoids both of these issues.

Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.

But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.

However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.

This does exactly that.

Which in turn will then allow for much simpler implementations of
min_t()/max_t().  All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.

We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.

Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs

Pull UBI and UBIFS updates from Richard Weinberger:

 - Many fixes for power-cut issues by Zhihao Cheng

 - Another ubiblock error path fix

 - ubiblock section mismatch fix

 - Misc fixes all over the place

* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: Fix ubi_init() ubiblock_exit() section mismatch
  ubifs: add check for crypto_shash_tfm_digest
  ubifs: Fix inconsistent inode size when powercut happens during appendant writing
  ubi: block: fix null-pointer-dereference in ubiblock_create()
  ubifs: fix kernel-doc warnings
  ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
  mtd: ubi: Restore missing cleanup on ubi_init() failure path
  ubifs: dbg_orphan_check: Fix missed key type checking
  ubifs: Fix unattached inode when powercut happens in creating
  ubifs: Fix space leak when powercut happens in linking tmpfile
  ubifs: Move ui->data initialization after initializing security
  ubifs: Fix adding orphan entry twice for the same inode
  ubifs: Remove insert_dead_orphan from replaying orphan process
  Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
  ubifs: Don't add xattr inode into orphan area
  ubifs: Fix unattached xattr inode if powercut happens after deleting
  mtd: ubi: avoid expensive do_div() on 32-bit machines
  mtd: ubi: make ubi_class constant
  ubi: eba: properly rollback inside self_check_eba

After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:

  $ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
  clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]

This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.

'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.

All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.

Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317f ("x86: implement x86_32 stack protector")
Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Since ubiblock_exit() is now called from an init function,
the __exit section no longer makes sense.

Cc: Ben Hutchings <bwh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407131403.wZJpd8n2-lkp@intel.com/Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>

Pull turbostat updates from Len Brown:

 - Enable turbostat extensions to add both perf and PMT (Intel
   Platform Monitoring Technology) counters via the cmdline

 - Demonstrate PMT access with built-in support for Meteor Lake's
   Die C6 counter

* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: version 2024.07.26
  tools/power turbostat: Include umask=%x in perf counter's config
  tools/power turbostat: Document PMT in turbostat.8
  tools/power turbostat: Add MTL's PMT DC6 builtin counter
  tools/power turbostat: Add early support for PMT counters
  tools/power turbostat: Add selftests for added perf counters
  tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
  tools/power turbostat: Move verbose counter messages to level 2
  tools/power turbostat: Move debug prints from stdout to stderr
  tools/power turbostat: Fix typo in turbostat.8
  tools/power turbostat: Add perf added counter example to turbostat.8
  tools/power turbostat: Fix formatting in turbostat.8
  tools/power turbostat: Extend --add option with perf counters
  tools/power turbostat: Group SMI counter with APERF and MPERF
  tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
  tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
  tools/power turbostat: Remove anonymous union from rapl_counter_info_t
  tools/power/turbostat: Switch to new Intel CPU model defines

Pull CXL updates from Dave Jiang:
 "Core:

   - A CXL maturity map has been added to the documentation to detail
     the current state of CXL enabling.

     It provides the status of the current state of various CXL features
     to inform current and future contributors of where things are and
     which areas need contribution.

   - A notifier handler has been added in order for a newly created CXL
     memory region to trigger the abstract distance metrics calculation.

     This should bring parity for CXL memory to the same level vs
     hotplugged DRAM for NUMA abstract distance calculation. The
     abstract distance reflects relative performance used for memory
     tiering handling.

   - An addition for XOR math has been added to address the CXL DPA to
     SPA translation.

     CXL address translation did not support address interleave math
     with XOR prior to this change.

  Fixes:

   - Fix to address race condition in the CXL memory hotplug notifier

   - Add missing MODULE_DESCRIPTION() for CXL modules

   - Fix incorrect vendor debug UUID define

  Misc:

   - A warning has been added to inform users of an unsupported
     configuration when mixing CXL VH and RCH/RCD hierarchies

   - The ENXIO error code has been replaced with EBUSY for inject poison
     limit reached via debugfs and cxl-test support

   - Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
     unnecessary PCI config reads

   - A refactor to a common struct for DRAM and general media CXL
     events"

* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/core/pci: Move reading of control register to immediately before usage
  cxl: Remove defunct code calculating host bridge target positions
  cxl/region: Verify target positions using the ordered target list
  cxl: Restore XOR'd position bits during address translation
  cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
  cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
  cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
  cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
  cxl/core: Fix incorrect vendor debug UUID define
  Documentation: CXL Maturity Map
  cxl/region: Simplify cxl_region_nid()
  cxl/region: Support to calculate memory tier abstract distance
  cxl/region: Fix a race condition in memory hotplug notifier
  cxl: add missing MODULE_DESCRIPTION() macros
  cxl/events: Use a common struct for DRAM and General Media events

Pull unicode update from Gabriel Krisman Bertazi:
 "Two small fixes to silence the compiler and static analyzers tools
  from Ben Dooks and Jeff Johnson"

* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
  unicode: add MODULE_DESCRIPTION() macros
  unicode: make utf8 test count static

In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull more smb client updates from Steve French:

 - fix for potential null pointer use in init cifs

 - additional dynamic trace points to improve debugging of some common
   scenarios

 - two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
   mount parsing error)

* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: add dynamic trace point for session setup key expired failures
  smb3: add four dynamic tracepoints for copy_file_range and reflink
  smb3: add dynamic tracepoint for reflink errors
  cifs: mount with "unix" mount option for SMB1 incorrectly handled
  cifs: fix reconnect with SMB1 UNIX Extensions
  cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
     - Fix request without payloads cleanup  (Leon)
     - Use new protection information format (Francis)
     - Improved debug message for lost pci link (Bart)
     - Another apst quirk (Wang)
     - Use appropriate sysfs api for printing chars (Markus)

 - ublk async device deletion fix (Ming)

 - drbd kerneldoc fixups (Simon)

 - Fix deadlock between sd removal and release (Yang)

* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
  nvme-pci: add missing condition check for existence of mapped data
  ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
  block: fix deadlock between sd_remove & sd_release
  drbd: Add peer_device to Kernel doc
  nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
  nvme-pci: Fix the instructions for disabling power management
  nvme: remove redundant bdev local variable
  nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
  nvme/pci: Add APST quirk for Lenovo N60z laptop

Pull io_uring fixes from Jens Axboe:

 - Fix a syzbot issue for the msg ring cache added in this release. No
   ill effects from this one, but it did make KMSAN unhappy (me)

 - Sanitize the NAPI timeout handling, by unifying the value handling
   into all ktime_t rather than converting back and forth (Pavel)

 - Fail NAPI registration for IOPOLL rings, it's not supported (Pavel)

 - Fix a theoretical issue with ring polling and cancelations (Pavel)

 - Various little cleanups and fixes (Pavel)

* tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linux:
  io_uring/napi: pass ktime to io_napi_adjust_timeout
  io_uring/napi: use ktime in busy polling
  io_uring/msg_ring: fix uninitialized use of target_req->flags
  io_uring: align iowq and task request error handling
  io_uring: kill REQ_F_CANCEL_SEQ
  io_uring: simplify io_uring_cmd return
  io_uring: fix io_match_task must_hold
  io_uring: don't allow netpolling with SETUP_IOPOLL
  io_uring: tighten task exit cancellations