- 20 Sep, 2022 39 commits
-
-
Wojciech Drewek authored
Allow to offload L2TPv3 filters by adding flow_rule_match_l2tpv3. Drivers can extract L2TPv3 specific fields from now on. Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Wojciech Drewek authored
Add support for matching on L2TPv3 session ID. Session ID can be specified only when ip proto was set to IPPROTO_L2TP. Example filter: # tc filter add dev $PF1 ingress prio 1 protocol ip \ flower \ ip_proto l2tp \ l2tpv3_sid 1234 \ skip_sw \ action mirred egress redirect dev $VF1_PR Acked-by:Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Wojciech Drewek authored
Allow to dissect L2TPv3 specific field which is: - session ID (32 bits) L2TPv3 might be transported over IP or over UDP, this implementation is only about L2TPv3 over IP. IP protocol carries L2TPv3 when ip_proto is IPPROTO_L2TP (115). Acked-by:
-
Wojciech Drewek authored
IPPROTO_L2TP is currently defined in l2tp.h, but most of ip protocols are defined in in.h file. Move it there in order to keep code clean. Acked-by:
-
Jules Irenge authored
coccinelle reports a warning WARNING: casting value returned by memory allocation function to (struct octep_rx_buffer *) is useless. To fix this the useless cast is removed. Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Link: https://lore.kernel.org/r/Yx+sr9o0uylXVcOl@playgroundSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Nathan Huckleberry authored
All usages of the vport_ops struct have the .send field set to dev_queue_xmit or internal_dev_recv. Since most usages are set to dev_queue_xmit, the function hook should match the signature of dev_queue_xmit. The only call to vport_ops->send() is in net/openvswitch/vport.c and it throws away the return value. This mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. Reported-by:
Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220913230739.228313-1-nhuck@google.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of t7xx_ccmni_start_xmit should be changed from int to netdev_tx_t. Reported-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://lore.kernel.org/r/20220912214510.929070-1-nhuck@google.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of ipc_wwan_link_transmit should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of korina_send_packet should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of liteeth_start_xmit should be changed from int to netdev_tx_t. Reported-by:
Gabriel Somlo <gsomlo@gmail.com> Link: https://lore.kernel.org/r/20220912195307.812229-1-nhuck@google.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of emac_dev_xmit should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of dm9000_start_xmit should be changed from int to netdev_tx_t. Reported-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of ax88796c_start_xmit should be changed from int to netdev_tx_t. Reported-by:
Lukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20220912194031.808425-1-nhuck@google.comSigned-off-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - drop unused headers in trace.h, by Sven Eckelmann - drop initialization of flexible ethtool_link_ksettings, by Sven Eckelmann - remove unused struct definitions, by Marek Lindner * tag 'batadv-next-pullrequest-20220916' of git://git.open-mesh.org/linux-merge: batman-adv: remove unused struct definitions batman-adv: Drop initialization of flexible ethtool_link_ksettings batman-adv: Drop unused headers in trace.h batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20220916161454.1413154-1-sw@simonwunderlich.deSigned-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Adjust QOS tests for Spectrum-4 testing Amit writes: Quality Of Service tests create congestion and verify the switch behavior. To create congestion, they need to have more traffic than the port can handle, so some of them force 1Gbps speed. The tests assume that 1Gbps speed is supported. Spectrum-4 ASIC will not support this speed in all ports, so to be able to run QOS tests there, some adjustments are required. Patch set overview: Patch #1 adjusts qos_ets_strict, qos_mc_aware and sch_ets tests. Patch #2 adjusts RED tests. Patch #3 extends devlink_lib to support querying maximum pool size. Patch #4 adds a test which can be used instead of qos_burst and do not assume that 1Gbps speed is supported. Patch #5 removes qos_burst test. ==================== Link: https://lore.kernel.org/r/cover.1663152826.git.petrm@nvidia.comSigned-off-by:
-
Amit Cohen authored
The previous patch added a test which can be used instead of qos_burst.sh. Remove this test. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Add an equivalent test to qos_burst, the test's purpose is same, but the new test uses simpler topology and does not require forcing low speed. In addition, it can be run Spectrum-2 and not only Spectrum-3+. The idea is to use a shaper in order to limit the traffic and create congestion. qos_burst test uses small pool, sends many small packets, and verify that packets are not dropped, which means that many descriptors can be handled. This test should check the change that commit c864769a ("mlxsw: Configure descriptor buffers") pushed. Instead, the new test tries to use more than 85% of maximum supported descriptors. The idea is to use big pool (as much as the ASIC supports), such that the pool size does not limit the traffic, then send many small packets, which means that many descriptors are used, and check how many packets the switch can handle. The usage of shaper allows to run the test in all ASICs, regardless of the CPU abilities, as it is able to create the congestion with low rate of packets. Signed-off-by:
-
Amit Cohen authored
The maximum pool size is exposed via 'devlink sb' command. The next patch will add a test which increases some pools to the maximum size. Add a function to query the value. Signed-off-by:
-
Amit Cohen authored
QOS tests create congestion and verify the switch behavior. To create congestion, they need to have more traffic than the port can handle, so some of them force 1Gbps speed. The tests assume that 1Gbps speed is supported, otherwise, they will fail. Spectrum-4 ASIC will not support this speed in all ports, so to be able to run the tests there, some adjustments are required. Use shapers to limit the traffic instead of forcing speed. Note that for several ports, the speed configuration is just for autoneg issues, so shaper is not needed instead. The tests already use ETS qdisc as a root and RED qdiscs as children. Add a new TBF shaper to limit the rate of traffic, and use it as a root qdisc, then save the previous hierarchy of qdiscs under the new TBF root. In some ASICs, the shapers do not limit the traffic as accurately as forcing speed. To make the tests stable, allow the backlog size to be up to +-10% of the threshold. The aim of the tests is to make sure that with backlog << threshold, there are no drops, and that packets are dropped somewhere in vicinity of the configured threshold. Signed-off-by:
-
Amit Cohen authored
QOS tests create congestion and verify the switch behavior. To create congestion, they need to have more traffic than the port can handle, so some of them force 1Gbps speed. The tests assume that 1Gbps speed is supported, otherwise, they will fail. Spectrum-4 ASIC will not support this speed in all ports, so to be able to run QOS tests there, some adjustments are required. Use shapers to limit the traffic instead of forcing speed. Note that for several ports, the speed configuration is just for autoneg issues, so shaper is not needed instead. In tests that already use shapers, set the existing shaper to be a child of a new TBF shaper which is added as a root qdisc and acts as a port shaper. Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Remove label = "cpu" from DSA dt-bindings As explained in more detail in patch 1/3, label = "cpu" is not part of DSA's device tree bindings, yet we have some checks in the dt-schema for mt7530 which are written as if it was. Reformulate those checks, and remove all occurrences of this seemingly used, but actually unused, property from the binding examples. ==================== Link: https://lore.kernel.org/r/20220912175058.280386-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
This is not used by the DSA dt-binding, so remove it from all examples. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Vladimir Oltean authored
The common dsa-port.yaml does this (and more) since commit 2ec2fb83 ("dt-bindings: net: dsa: make phylink bindings required for CPU/DSA ports"). Signed-off-by:
-
Vladimir Oltean authored
The fact that some DSA device trees use 'label = "cpu"' for the CPU port is nothing but blind cargo cult copying. The 'label' property was never part of the DSA DT bindings for anything except the user ports, where it provided a hint as to what name the created netdevs should use. DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(), but this is only for non-OF code paths (platform data). The proper way to identify a CPU port is to look at whether the 'ethernet' phandle is present. Signed-off-by:
-
Xiu Jianfeng authored
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by:
Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220909091840.247946-1-xiujianfeng@huawei.comSigned-off-by:
-
Gaosheng Cui authored
rxrpc_max_call_lifetime has been removed since commit a158bdd3 ("rxrpc: Fix call timeouts"), so remove it. Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20220909064042.1149404-1-cuigaosheng1@huawei.comSigned-off-by:
-
Yang Yingliang authored
Use kmemdup() helper instead of open-coding to simplify the code when allocate dev_addr. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20220914140100.3795545-2-yangyingliang@huawei.comSigned-off-by:
-
Yang Yingliang authored
Add missing error code when mlx5e_macsec_fs_add_rule() or mlx5e_macsec_fs_init() fails. mlx5e_macsec_fs_init() don't return ERR_PTR(), so replace IS_ERR_OR_NULL() check with NULL pointer check. Fixes: e467b283 ("net/mlx5e: Add MACsec TX steering rules") Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Standardized ethtool counters for NXP ENETC This is another preparation patch for the introduction of MAC Merge Layer statistics, this time for the enetc driver (endpoint ports on the NXP LS1028A). The same set of stats groups is supported as in the case of the Felix DSA switch. ==================== Link: https://lore.kernel.org/r/20220909113800.55225-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Structure the code in such a way that it can be reused later for the pMAC statistics, by just changing the "mac" argument to 1. Usage: ethtool --include-statistics --show-pause eno2 ethtool -S eno0 --groups eth-mac ethtool -S eno0 --groups eth-ctrl ethtool -S eno0 --groups rmon Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The ENETC has counters for the eMAC and for the pMAC exactly 0x1000 apart from each other. The driver only contains definitions for PM0, the eMAC. Rather than duplicating everything for PM1, modify the register definitions such that they take the MAC as argument. Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Renesas Ethernet AVB (EtherAVB-IF) blocks on R-Car Gen4 SoCs (e.g. R-Car V4H) by matching on a family-specific compatible value. These are treated the same as EtherAVB on R-Car Gen3. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/2ee968890feba777e627d781128b074b2c43cddb.1662718171.git.geert+renesas@glider.beSigned-off-by:
-
Jakub Kicinski authored
Geert Uytterhoeven says: ==================== dt-bindings: net: renesas,etheravb: R-Car Gen4 updates This patch series contains two updates for the Renesas Ethernet AVB Device Tree bindings. ==================== Link: https://lore.kernel.org/r/cover.1662714607.git.geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
Document support for the Renesas Ethernet AVB (EtherAVB-IF) block in the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
-
Geert Uytterhoeven authored
Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence move its compatible value to the R-Car Gen4 section. Signed-off-by:
-
Divya Koppera authored
Support for Cable Diagnostics in lan8814 phy Signed-off-by:
Divya Koppera <Divya.Koppera@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220909083123.30134-1-Divya.Koppera@microchip.comSigned-off-by:
-
Jakub Kicinski authored
Wei Fang says: ==================== Add FEC support on s32v234 platform This series patches are to add FEC support on s32v234 platfom. 1. Add compatible string and quirks for fsl,s32v234 2. Update Kconfig to also check for ARCH_S32. ==================== Link: https://lore.kernel.org/r/20220907095649.3101484-1-wei.fang@nxp.comSigned-off-by:
-
Wei Fang authored
Update Kconfig to also check for ARCH_S32. Add compatible string and quirks for fsl,s32v234 Signed-off-by:
Wei Fang <wei.fang@nxp.com> Signed-off-by:
-
Wei Fang authored
Add fsl,s32v234-fec to compatible property to support s32v234 platform. Signed-off-by:
-
- 19 Sep, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdJakub Kicinski authored
Lee Jones says: ==================== Immutable branch between MFD, Net and Pinctrl due for the v6.0 merge window * tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: ocelot: Add support for the vsc7512 chip via spi dt-bindings: mfd: ocelot: Add bindings for VSC7512 resource: add define macro for register address resources pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration pinctrl: microchip-sgpio: allow sgpio driver to be used as a module pinctrl: ocelot: add ability to be used in a non-mmio configuration net: mdio: mscc-miim: add ability to be used in a non-mmio configuration mfd: ocelot: Add helper to get regmap from a resource ==================== Link: https://lore.kernel.org/r/YxrjyHcceLOFlT/c@google.comSigned-off-by:
-
