User can specify injected instances by the mask. For backward
compatibility, the mask value is incorporated into sub block index
without interface change of RAS TA.
User uses logical mask and driver should convert it to physical value
before sending it to RAS TA.

v2: update parameter name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Convert instance mask for the convenience of RAS TA.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch enables IH CAM on GFX9.4.3 ASIC.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Current calculation only works for NPS4/QPX mode, correct it for
NPS4/CPX mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Rename smv_migrate_init to a better name kgd2kfd_init_zone_device
because it setup zone devive pgmap for page migration and keep it in
kfd_migrate.c to access static functions svm_migrate_pgmap_ops. Call it
only once in amdgpu_device_ip_init after adev ip blocks are initialized,
but before amdgpu_amdkfd_device_init initialize kfd nodes which enable
SVM support based on pgmap.

svm_range_set_max_pages is called by kgd2kfd_device_init everytime after
switching compute partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

During XCP init, unlike the primary device, there is no amdgpu_device
attached to each XCP's drm_device

In case that user trying to open/close the primary node of XCP drm_device
this rerouting is to solve the NULL pointer issue causing by referring
to any member of the amdgpu_device

 BUG: unable to handle page fault for address: 0000000000020c80
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 Oops: 0002 [#1] PREEMPT SMP NOPTI
 Call Trace:
  <TASK>
  lock_timer_base+0x6b/0x90
  try_to_del_timer_sync+0x2b/0x80
  del_timer_sync+0x29/0x40
  flush_delayed_work+0x1c/0x50
  amdgpu_driver_open_kms+0x2c/0x280 [amdgpu]
  drm_file_alloc+0x1b3/0x260 [drm]
  drm_open+0xaa/0x280 [drm]
  drm_stub_open+0xa2/0x120 [drm]
  chrdev_open+0xa6/0x1c0
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

svm_migrate_init set the max svm range pages based on the KFD nodes
partition size. APU mode don't init pgmap because there is no migration.

kgd2kfd_device_init calls svm_migrate_init after KFD nodes allocation
and initialization.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch fixes memory reporting on the GFX 9.4.3 APU and dGPU
by reporting available memory on a per partition basis. If its an
APU, available and used memory calculations take into account
system and TTM memory.

v2: squash in fix ("drm/amdkfd: Fix array out of bound warning")
    squash in fix ("drm/amdgpu: Update memory reporting for GFX9.4.3")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need to track memory usage on a per partition basis. To do
that, store the local memory information in KFD node instead
of kfd device.

v2: squash in fix ("amdkfd: Use mem_id to access mem_partition info")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Find xcp_id from amdgpu_fpriv, use it for amdgpu_gem_object_create.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

kfd_ioctl_get_dmabuf use the amdgpu bo xcp_id to get the gpu_id of the
KFD node from the exported dmabuf_adev, and then create kfd bo on the
correct adev and KFD node when importing the amdgpu bo to KFD.

Remove function kfd_device_by_adev, it is not needed as it is the same
result as dmabuf_adev->kfd.dev->nodes[0]->id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For memory accounting per compute partition and export drm amdgpu bo and
then import to KFD, we need the xcp id to account the memory usage or
find the KFD node of the original amdgpu bo to create the KFD bo on the
correct adev KFD node.

Set xcp_id_plus1 of amdgpu_bo_param to create bo and store xcp_id to
amddgpu bo. Add helper macro to get the mem_id from adev and xcp_id.

v2: squash in fix ("drm/amdgpu: Fix BO creation failure on GFX 9.4.3 dGPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

TTM place lpfn is exclusive used as end (start + size) in drm and buddy
allocator, adev->gmc memory partition range lpfn is inclusive (start +
size - 1), should plus 1 to set TTM place lpfn.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Alloc kernel mode page table bo uses the amdgpu_vm->mem_id + 1 as bp
mem_id_plus1 parameter. For APU mode, select the correct TTM pool to
alloc page from the corresponding memory partition, this will be the
closest NUMA node. For dGPU mode, select the correct address range for
vram manager.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use MTYPE RW/MTYPE_CC for mapping system memory or VRAM to KFD node
within the same memory partition, use MTYPE_NC for mapping on KFD node
from the far memory partition of the same socket or from another socket
on same XGMI hive.

On NPS4 or 4P system, MTYPE will be overridden per page depending on
the memory NUMA node id and vm->mem_id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dGPU mode uses VRAM manager to validate bo, amdgpu bo placement use the
mem_id  to get the allocation range first, last page frame number
from xcp manager, pass to drm buddy allocator as the allowed range.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pass kfd node->xcp->mem_id to amdgpu bo create parameter mem_id_plus1 to
allocate new svm_bo on the specified memory partition.

This is only for dGPU mode as we don't migrate with APU mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For dGPU mode VRAM allocation, create amdgpu_bo from amdgpu_vm->mem_id,
to alloc from the correct memory range.

For APU mode VRAM allocation, set alloc domain to GTT, and set
bp->mem_id_plus1 from amdgpu_vm->mem_id + 1 to create amdgpu_bo, to
allocate system memory from correct NUMA node.

For GTT allocation, use mem_id -1 to allocate system memory from any
NUMA nodes.

Remove amdgpu_ttm_tt_set_mem_pool, to avoid the confusion that memory
maybe allocated from different mem_id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add mem_id_plus1 parameter to amdgpu_gem_object_create and pass it to
amdgpu_bo_create. For dGPU mode allocation, mem_id is used by VRAM
manager to get the memory partition fpfn, lpfn from xcp manager. For APU
native mode allocation, mem_id is used to get NUMA node id from xcp
manager, then pass to TTM as numa pool id to alloc memory from the
specific NUMA node. mem_id -1 means for entire VRAM or any NUMA nodes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Show KFD node memory partition id and size, add helper function
KFD_XCP_MEMORY_SIZE to get kfd node memory size, will be used
later to support memory accounting per partition.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If xcp_mgr is initialized, add mem_id to amdgpu_vm structure to store
memory partition number when creating amdgpu_vm for the xcp. The xcp
number is decided when opening the render device, for example
/dev/dri/renderD129 is xcp_id 0, /dev/dri/renderD130 is xcp_id 1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

From KFD topology, application will find kfd node with the corresponding
drm device node minor number, for example if partition drm node starts
from /dev/dri/renderD129, then KFD node 0 with store drm node minor
number 129. Application will open drm node /dev/dri/renderD129 to create
amdgpu vm for kfd node 0 with the correct vm->mem_id to indicate the
memory partition.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Used by KFD to check memory limit accounting.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update ref_cnt before ctx free.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Run partition schedule if it is supported during ctx init entity.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement partition schedule for GC(9, 4, 3).
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Keep amdgpu_ctx_mgr in ctx structure to track fpriv.

v2: add missing fpriv declaration lost in rebase
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add partition scheduler list update in late init
and xcp partition mode switch.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update header to support partition scheduling.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Keep track partition ID in ring.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Find partition ID when open device from render device minor.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-and-tested-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support partition drm devices on GC_HWIP IP_VERSION(9, 4, 3).

This is a temporary solution and will be superceded.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-and-tested-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update mtype_local module parameter to use MTYPE_RW by default.

0: MTYPE_RW (default)
1: MTYPE_NC
2: MTYPE_CC
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Selects the MTYPE to be used for local memory,
(0 = MTYPE_CC (default), 1 = MTYPE_NC, 2 = MTYPE_RW)

v2: squash in build fix (Alex)
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On GFXv9.4.3 NUMA APUs, system memory locality must be determined per
page to choose the correct MTYPE. This patch adds a GMC callback that
can provide this per-page override and implements it for native mode.

Carve-out mode is not yet supported and will use the safe default
(remote) MTYPE for system memory.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Treat system memory on NUMA systems as remote by default. Overriding with
a more efficient MTYPE per page will be implemented in the next patch.

No need for a special case for APP APUs. System memory is handled the same
for carve-out and native mode. And VRAM doesn't exist in native mode.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

By default, set use_mtype_cc_wa to 1 to set PTE coherence flag MTYPE_CC
instead of MTYPE_RW by default. This is required for the time being to
mitigate a bug causing XCCs to hit stale data due to TCC marking fully
dirty lines as exclusive.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Invalidate TLBs via a legacy flush request (flush_type=0) prior to the
heavyweight flush requests (flush_type=2) in gmc_v9_0.c. This is
temporarily required to mitigate a bug causing CPC UTCL1 to return stale
translations after invalidation requests in address range mode.

v2: squash in long term fix "drm/amdgpu: disable extra gfx943 legacy flush on rev1+"
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For GFX 9.4.3 APP APU VRAM is allocated in GTT domain. While freeing
memory check for GTT domain instead of VRAM if it is APP APU
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

CPX compute mode is valid mode for NPS4 memory partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>