1. 09 Jan, 2013 3 commits
    • Daniel Schaal's avatar
      Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k. · 2c262b2a
      Daniel Schaal authored
      T:  Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#=  4 Spd=12   MxCh= 0
      D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
      P:  Vendor=04ca ProdID=3006 Rev= 0.02
      C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
      I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
      E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
      I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
      I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
      I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
      I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
      I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
      Signed-off-by: default avatarDaniel Schaal <farbing@web.de>
      Signed-off-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
      2c262b2a
    • AceLan Kao's avatar
      Bluetooth: Add support for IMC Networks [13d3:3393] · eed307e2
      AceLan Kao authored
      Add support for the AR9462 chip
      
      T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
      D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
      P:  Vendor=13d3 ProdID=3393 Rev=00.01
      C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
      I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
      Signed-off-by: default avatarAceLan Kao <acelan.kao@canonical.com>
      Signed-off-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
      eed307e2
    • Szymon Janc's avatar
      Bluetooth: Fix sending HCI commands after reset · dbccd791
      Szymon Janc authored
      After sending reset command wait for its command complete event before
      sending next command. Some chips sends CC event for command received
      before reset if reset was send before chip replied with CC.
      
      This is also required by specification that host shall not send
      additional HCI commands before receiving CC for reset.
      
      < HCI Command: Reset (0x03|0x0003) plen 0                              [hci0] 18.404612
      > HCI Event: Command Complete (0x0e) plen 4                            [hci0] 18.405850
            Write Extended Inquiry Response (0x03|0x0052) ncmd 1
              Status: Success (0x00)
      < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0      [hci0] 18.406079
      > HCI Event: Command Complete (0x0e) plen 4                            [hci0] 18.407864
            Reset (0x03|0x0003) ncmd 1
              Status: Success (0x00)
      < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0      [hci0] 18.408062
      > HCI Event: Command Complete (0x0e) plen 12                           [hci0] 18.408835
      Signed-off-by: default avatarSzymon Janc <szymon.janc@tieto.com>
      Cc: stable@vger.kernel.org
      Acked-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
      Signed-off-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
      dbccd791
  2. 07 Jan, 2013 4 commits
  3. 04 Jan, 2013 6 commits
  4. 03 Jan, 2013 10 commits
  5. 02 Jan, 2013 17 commits