- 10 Feb, 2021 1 commit
-
-
Jaroslav Kysela authored
Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Acked-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210210083713.1034201-1-perex@perex.czSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 08 Feb, 2021 12 commits
-
-
Hans de Goede authored
The kernel has 2 drivers for the Low Power Engine audio-block on Bay- and Cherry-Trail SoCs. The old SST driver and the new SOF driver. If both drivers are enabled then the kernel will default to using the old SST driver, unless told otherwise through the snd_intel_dspcfg.dsp_driver module-parameter. Add a boolean SND_INTEL_BYT_PREFER_SOF Kconfig option, which when set to Y will make the kernel default to the new SOF driver instead. The option defaults to n, preserving the current behavior. Making this configurable will help distributions such as Fedora: https://fedoraproject.org/w/index.php?title=Changes/SofDefaultForIntelLpe to test using SOF on BYT/CHT during the transition phase where we have both drivers (eventually the old driver and this option will be removed). Note that this drops the acpi_config_table[] containing 2 entries per ACPI hardware-id if both drivers are enabled. snd_intel_acpi_dsp_find_config() will always return the first hit, so we only need a single entry with the flags value set depending on the Kconfig settings. Suggested-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210208135919.135600-1-hdegoede@redhat.comSigned-off-by:
-
Takashi Iwai authored
There are a few places doing the same loop iterating all PCM substreams belonging to the PCM object. Introduce a local helper macro, for_each_pcm_substream(), to simplify the code. Link: https://lore.kernel.org/r/20210206203656.15959-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The PCM stop operation sets the stop_operating flag for indicating the sync_stop post-process. This flag is, however, set unconditionally even if the PCM trigger weren't issued. This may lead to inconsistency in the driver side. Correct the code to set stop_operating flag only after the trigger STOP is actually called. Fixes: 1e850bee ("ALSA: pcm: Add the support for sync-stop operation") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210206203656.15959-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The current PCM code calls the sync_stop at the resume action due to the analogy to the PCM prepare call pattern. But, it makes little sense, as the sync should have been done rather at the suspend time, not at the resume time. This patch corrects the sync_stop call at suspend/resume to assure the sync before finishing the suspend. Fixes: 1e850bee ("ALSA: pcm: Add the support for sync-stop operation") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210206203656.15959-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The PCM core should perform the sync for the pending stop operations at disconnection. Otherwise it may lead to unexpected access. Currently the old user of sync_stop, USB-audio driver, has its own sync, so this isn't needed, but it's better to guarantee the sync in the PCM core level. This patch adds the missing sync_stop call at PCM disconnection callback. It also assures the IRQ sync if it's specified in the card. snd_pcm_sync_stop() is slightly modified to be called also for any PCM substream object now. Fixes: 1e850bee ("ALSA: pcm: Add the support for sync-stop operation") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210206203656.15959-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
In the later patch, we're going to issue the PCM sync_stop calls at disconnection. But currently the USB-audio driver can't handle it because it has a check of shutdown flag for stopping the URBs. This is basically superfluous (the stopping URBs are safe at disconnection state), so let's drop the check. Fixes: dc5eafe7 ("ALSA: usb-audio: Support PCM sync_stop") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210206203052.15606-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The endpoint management has bit flags to indicate the current state, and we're dealing two things: the running bit and the stopping bit. There is a thin window in transition from the running to the stopping in stop_urbs(), and as long as the bit flags are used, it's difficult to plug. This patch modifies the state management code to use the atomic int and follow the explicit three states, STOPPED, RUNNING and STOPPING. The state change is done via atomic_cmpxhg() for avoiding possible races, and check the state change more strictly. The unexpected state change is now handled as an error. Fixes: d0f09d1e ("ALSA: usb-audio: Refactoring endpoint URB deactivation") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210206203052.15606-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
When we stop an endpoint in release_urbs(), it ignores the inconsistent endpoint state and tries to release the resources. This shouldn't happen in theory, but it's still safer to abort the release and let the caller proper error handling. Also, stop_and_unlink_urbs() called from release_urbs() does two step works, and it's more straightforward to split this to two functions again, so that the call from the PCM trigger won't take the path with sleeping. This patch modifies the EP management code to adapt two points above. Fixes: d0f09d1e ("ALSA: usb-audio: Refactoring endpoint URB deactivation") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210206203052.15606-2-tiwai@suse.deSigned-off-by:
-
Takashi Sakamoto authored
Fireface UCX, UFX, and FF802 are categorized for latter protocol of the series. Current support for FF802 (and UFX) includes failure to parse sync status register and results in EIO. Further investigation figures out that the content of register differs depending on models. This commit adds tables specific to FF802 and UFX to fix it. Fixes: 062bb452 ("ALSA: fireface: add support for RME FireFace 802") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210207154736.229551-1-o-takashi@sakamocchi.jpSigned-off-by:
-
Kai Vehmanen authored
The i915 display power is requested both by controller (for init and link reset) as well as by codec driver (for codec control). There's an additional constraint that on some platforms frequent changes to display power state may cause visible flicker. To avoid this, the SOF hda controller requests display power whenever it is active and only releases it when runtime suspended. This patch utilizes the new hdac_bus link_power op to plug into HDA link state changes. By monitoring link state changes, we can keep the controller side display power wakeref until the codec driver has completed its work, and only release the wakeref when codec driver is suspended. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Acked-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210205184630.1938761-4-kai.vehmanen@linux.intel.comSigned-off-by:
-
Kai Vehmanen authored
Opt-in to use snd_hdac_ext_bus_link_power() to manage HDA link power up/down events. This allows to reduce power consumption in cases where some HDA codecs are suspended, but other child devices (HDA or non-HDA codecs) remain active and controller itself remains in active state. By using snd_hdac_ext_bus_link_power(), the individual HDA links can be powered off and if all HDA codecs are powered down, the command DMA can also be shut down. Signed-off-by:
-
Kai Vehmanen authored
The extended HDA bus (hdac_ext) provides interfaces for more fine-grained control of individual links than what plain HDA provides for. Links can be powered off when they are not used and if all links are released, controller can shut down the command DMA. These interfaces are currently not used by common HDA codec drivers. When a HDA codec is runtime suspended, it calls snd_hdac_codec_link_down(), but there is no link to the HDA extended bus, and on controller side the links are shut down only when all codecs are suspended. This patch adds link_power() to hdac_bus ops. Controllers using the HDA extended core, can use this to plug in snd_hdac_ext_bus_link_power() to implement more fine-grained control of link power. No change is needed for plain HDA controllers nor to existing HDA codec drivers. Co-developed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
- 07 Feb, 2021 1 commit
-
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./sound/pci/azt3328.c:2451:2-16: WARNING: Assignment of 0/1 to bool variable. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/1612681361-63404-1-git-send-email-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
- 05 Feb, 2021 4 commits
-
-
Fabian Lesniak authored
This commit adds mixer quirks for the Pioneer DJM-900NXS2 mixer. This device has 6 capture channels, 5 of them allow setting the signal source. This adds controls for these, similar to the DJM-250Mk2. However, playpack channels are not controllable via software like on the 250Mk2, as they can only be set manually on the mixing console. Read-only controls showing the currently selected playback channels are omitted. Signed-off-by:
Fabian Lesniak <fabian@lesniak-it.de> Link: https://lore.kernel.org/r/20210205215116.258724-2-fabian@lesniak-it.deSigned-off-by:
-
Olivia Mackintosh authored
This allows for N different devices to use the pioneer mixer quirk for setting capture/record type and recording level. The impementation has not changed much with the exception of an additional mask on private_value to allow storing of a device index: DEVICE MASK 0xff000000 GROUP_MASK 0x00ff0000 VALUE_MASK 0x0000ffff This could be improved by changing the arrays of wValues for each channel to contain named definitions (e.g. SND_DJM_CAP_LINE). It would improve readability and perhaps would allow using the same array for multiple channels. The channel number can be specified on the control next to the wIndex. Feedback is very much appreciated as I'm not the most proficient C programmer but am learning as I go. Signed-off-by:
Olivia Mackintosh <livvy@base.nu> Link: https://lore.kernel.org/r/20210205184256.10201-2-livvy@base.nuSigned-off-by:
-
Takashi Iwai authored
The commit f274baa4 ("ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffers") introduced the mode to allocate coherent pages for PCM buffers, and it used bus->controller device as its DMA device. It turned out, however, that bus->sysdev is a more appropriate device to be used for DMA mapping in HCD code. This patch corrects the device reference accordingly. Note that, on most platforms, both point to the very same device, hence this patch doesn't change anything practically. But on platforms like xhcd-plat hcd, the change becomes effective. Fixes: f274baa4 ("ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffers") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210205144559.29555-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The kerndoc comment for the new function snd_usb_endpoint_free_all() had a typo wrt the argument name. Fix it. Fixes: 00272c61 ("ALSA: usb-audio: Avoid unnecessary interface re-setup") Reported-by:
-
- 02 Feb, 2021 8 commits
-
-
Takashi Iwai authored
The commit 2d670ea2 ("ALSA: jack: implement software jack injection via debugfs") introduced a debugfs root for each sound card object. The debugfs entry gets removed at the card removal, too, but it turned out that debugfs_remove() is called at a wrong place; it's after the card object gets freed, hence it leads to use-after-free. Fix it by moving the debugfs_remove() at the right place, the destructor of the card device. Fixes: 2d670ea2 ("ALSA: jack: implement software jack injection via debugfs") Reported-and-tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://lore.kernel.org/r/161228343605.1150.8862281636043446562@build.alporthouse.com Link: https://lore.kernel.org/r/20210202225629.1965-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
As the runtime PM issue was addressed by the recent fix 4961167b ("ALSA: hda/via: Apply the workaround generically for Clevo machines") for VIA codecs, we need no longer to keep the Clevo device off from the power saving as default. Drop the deny list entry accordingly. Depends: 4961167b ("ALSA: hda/via: Apply the workaround generically for Clevo machines") Link: https://lore.kernel.org/r/20210202092744.20321-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Back-merge the 5.11 devel branch for further patching. Signed-off-by: -
Olivia Mackintosh authored
As with most Pioneer devices, the device descriptor is vendor specific and as such, the number of channels, the PCM format, endpoints and sample rate need to be specified. This device has 8 inputs and 8 outputs and a sample rate of 48000 only. The PCM format is S24_3LE like other devices. There seems to be an appetite for reducing duplication amongs these Pioneer patches but again, I feel this is a step to be taken after support has been added as it's not completely clear where the commonalities are. Signed-off-by:
-
Olivia Mackintosh authored
Like the DJM-750, ensure that the format control message is passed to the device when opening a stream. It seems as though fmt->sync_ep is not always set when this function is called hence the passing of the value at the call site. If this can be fixed, fmt->sync_up should be used as the wvalue. There doesn't seem to be a "cpu_to_le24" type function defined hence for the open code but I did see a similar thing done in Bluez lib. Perhaps we can get these definitions defined in byteorder.h. See hci_cpu_to_le24 in include/net/bluetooth/hci.h:2543 for similar usage. Signed-off-by:
-
Hui Wang authored
This change adds audio jack injection feature through debugfs, with this feature, we could validate alsa userspace changes by injecting plugin or plugout events to the non-phantom audio jacks. With this change, the sound core will build the folders $debugfs_mount_dir/sound/cardN if SND_DEBUG and DEBUG_FS are enabled. And if users also enable the SND_JACK_INJECTION_DEBUG, the jack injection nodes will be built in the folder cardN like below: $tree $debugfs_mount_dir/sound $debugfs_mount_dir/sound ├── card0 │ ├── HDMI_DP_pcm_10_Jack │ │ ├── jackin_inject │ │ ├── kctl_id │ │ ├── mask_bits │ │ ├── status │ │ ├── sw_inject_enable │ │ └── type ... │ └── HDMI_DP_pcm_9_Jack │ ├── jackin_inject │ ├── kctl_id │ ├── mask_bits │ ├── status │ ├── sw_inject_enable │ └── type └── card1 ├── HDMI_DP_pcm_5_Jack │ ├── jackin_inject │ ├── kctl_id │ ├── mask_bits │ ├── status │ ├── sw_inject_enable │ └── type ... ├── Headphone_Jack │ ├── jackin_inject │ ├── kctl_id │ ├── mask_bits │ ├── status │ ├── sw_inject_enable │ └── type └── Headset_Mic_Jack ├── jackin_inject ├── kctl_id ├── mask_bits ├── status ├── sw_inject_enable └── type The nodes kctl_id, mask_bits, status and type are read-only, users could check jack or jack_kctl's information through them. The nodes sw_inject_enable and jackin_inject are directly used for injection. The sw_inject_enable is read-write, users could check if software injection is enabled or not on this jack, and users could echo 1 or 0 to enable or disable software injection on this jack. Once the injection is enabled, the jack will not change by hardware events anymore, once the injection is disabled, the jack will restore the last reported hardware events to the jack. The jackin_inject is write-only, if the injection is enabled, users could echo 1 or 0 to this node to inject plugin or plugout events to this jack. For the detailed usage information on these nodes, please refer to Documentation/sound/designs/jack-injection.rst. Reviewed-by:Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210127085639.74954-2-hui.wang@canonical.comSigned-off-by:
-
Jasmin Fazlic authored
Output loopback is a feature where you can record what you hear. The HDSP series of the RME interfaces provides this functionality at the hardware level and this patch exposes controls to enable or disable it per output (playback) channel. This probably works on other cards but due to a lack of hardware it is only tested and enabled for the HDSP9632 card with this patch. Should this patch be accepted a separate patch will be posted to https://github.com/alsa-project/alsa-tools/tree/master/hdspmixer which adds "LPBK" buttons to each output in the playback strip for the user to be able to control this feature from the user land. Users from Windows tool TotalMixFX should be familiar with this. Signed-off-by:
Jasmin Fazlic <superfassl@gmail.com> Link: https://lore.kernel.org/r/95cb3117-e85a-51a6-c2ce-bf736e70fc4c@gmail.comSigned-off-by:
-
PeiSen Hou authored
Modify 0x20 index 7 bit 5 to 1, make the 0x15 EAPD the same as 0x14. Signed-off-by:
PeiSen Hou <pshou@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/e62c5058957f48d8b8953e97135ff108@realtek.comSigned-off-by:
-
- 01 Feb, 2021 1 commit
-
-
Dinghao Liu authored
When device_type == DEVICE_ALI, we should also check the return value of pci_iomap() to avoid potential null pointer dereference. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20210131100916.7915-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
- 31 Jan, 2021 2 commits
-
-
Rikard Falkeborn authored
The only usage of hdac_dev_attr_group is to put its address in an array of pointers to const attribute_group structs. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20210131001241.2278-3-rikard.falkeborn@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
The only usage of ac97_adapter_attr_group is to put its address in an array of pointers to const attribute_group structs. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
- 26 Jan, 2021 10 commits
-
-
Takashi Iwai authored
We've got another report indicating a similar problem wrt the power-saving behavior with VIA codec on Clevo machines. Let's apply the existing workaround generically to all Clevo devices with VIA codecs to cover all in once. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1181330 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210126165603.11683-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.11-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.11 More fixes for v5.11, almost all driver specific issues including new device IDs - there's one error handling fix for the topology stuff too.
-
Takashi Iwai authored
isa: Make the remove callback for isa drivers return void Link: https://lore.kernel.org/r/20210122092449.426097-1-uwe@kleine-koenig.orgSigned-off-by:
-
Uwe Kleine-König authored
The driver core ignores the return value of the remove callback, so don't give isa drivers the chance to provide a value. Adapt all isa_drivers with a remove callbacks accordingly; they all return 0 unconditionally anyhow. Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c Acked-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/ Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/ Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/ Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.orgSigned-off-by:
-
Uwe Kleine-König authored
Instead of an unconditional return 0, return no value. One of the two callers ignored the return value already before. This simplifies the next patch. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/r/20210122092449.426097-3-uwe@kleine-koenig.orgSigned-off-by:
-
Uwe Kleine-König authored
If pcwd_isa_probe() succeeded pcwd_private.io_addr cannot be NULL. (And if pcwd_isa_probe() failed, pcwd_isa_remove() isn't called.) Acked-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
-
Dmitry Osipenko authored
The "chip" can't be NULL in hda_tegra_runtime_resume() because code would crash otherwise. Let's remove the unnecessary check in order to clean up code a tad. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested Suggested-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210120003154.26749-4-digetx@gmail.comSigned-off-by:
-
Dmitry Osipenko authored
Reset hardware on RPM-resume in order to bring it into a predictable state. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested Signed-off-by:
-
Dmitry Osipenko authored
Use clk_bulk helpers to make code cleaner. Note that this patch changed the order in which clocks are enabled to make code look nicer, but this doesn't matter in terms of hardware. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested Acked-by:
-
Takashi Sakamoto authored
Drivers in ALSA firewire stack supports eventing to userspace applications via ALSA hwdep interface. All of the drivers supports stream lock events. Some of them supports their unique events according to specification of target device. ALSA bebob driver supports the stream lock event only. In the case, it's enough to check condition only in loop with process blocking. However, current implementation check it again after breaking the loop. This commit removes the redundant check. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 25 Jan, 2021 1 commit
-
-
Mark Brown authored
Merge series "ASoC: SOF: partial fix to Kconfig issues" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: We've had several reports of broken dependencies. The 'right' fix is to revisit the module dependencies as suggested by Arnd Bergmann. This is WIP at https://github.com/thesofproject/linux/pull/2683. Since this is taking longer than expected, I am only sharing quick fixes for now. Pierre-Louis Bossart (2): ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies ASoC: SOF: SND_INTEL_DSP_CONFIG dependency sound/soc/sof/intel/Kconfig | 3 ++- sound/soc/sof/sof-acpi-dev.c | 11 ++++++----- sound/soc/sof/sof-pci-dev.c | 10 ++++++---- 3 files changed, 14 insertions(+), 10 deletions(-) -- 2.25.1
-
