So far, forwarding the hw_params of the input to output relied on the
.hw_params() callback of the cpu side of the codec2codec link to be called
first. This is a bit weak.

Instead, override the stream params of the codec2codec to link to set it up
correctly.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190729080139.32068-1-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Currently when we remove and reload driver we use previous ref_count
value to start iterating over skl->modules which leads to out of table
access. To fix this just inline the function and calculate indexes
everytime we parse UUID token.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190726090929.27946-2-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Currently in function snd_soc_dai_link_event_pre_pmu the error return
code in variable err is being set but this is not actually being returned,
the function just returns zero even when there are failures. Fix this by
returning the error return code.

Addresses-Coverity: ("Unused value")
Fixes: 3dcfb397 ("ASoC: codec2codec: deal with params when necessary")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190726123327.10467-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Address this rename:
	Documentation/devicetree/bindings/sound/{sun4i-i2s.txt -> allwinner,sun4i-a10-i2s.yaml}

Fixes: 0a0ca8e9 ("dt-bindings: sound: Convert Allwinner I2S binding to YAML")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/9932608f32030c886d906ea656eda8408c544776.1564140865.git.mchehab+samsung@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Implement custom snd_pcm_hw_rule to filter the available formats for the
second stream to make it symmetric and allow only formats which require
the same amount of bits on the bus as the running stream.

A simple constraint is not working correctly because for example:
the first stream is started with S24_LE

If we place 24 as constraint for the SAMPLE_BITS then the second stream
can not use S24_LE as it is physically 32bits.

If we would place 32 as constraint (physical width) then S32_LE would have
been allowed, but S24_3LE is not.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-3-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

The slot_width is a property for the bus while the constraint for
SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format.

Applying slot_width constraint to sample_bits works most of the time, but
it will blacklist valid formats in some cases.

With slot_width 24 we can support S24_3LE and S24_LE formats as they both
look the same on the bus, but a a 24 constraint on sample_bits would not
allow S24_LE as it is stored in 32bits in memory.

Implement a simple hw_rule function to allow all formats which require less
or equal number of bits on the bus as slot_width (if configured).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

This reverts commit db51707b.
Revert "ASoC: rockchip: i2s: Support mono capture"

Previous discussion in

https://patchwork.kernel.org/patch/10147153/

explains the issue of the patch.
While device is configured as 1-ch, hardware is still
generating a 2-ch stream.
When user space reads the data and assumes it is a 1-ch stream,
the rate will be slower by 2x.

Revert the change so 1-ch is not supported.
User space can selectively take one channel data out of two channel
if 1-ch is preferred.
Currently, both channels record identical data.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Fix some typo to have the filaname given in a comment match the real name
of the file.
Some 'acpi' have erroneously been written 'apci'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190725053523.16542-1-christophe.jaillet@wanadoo.frSigned-off-by: Mark Brown <broonie@kernel.org>

When running McASP as master capture alone will not record any audio unless
a parallel playback stream is running. As soon as the playback stops the
captured data is going to be silent again.

In McASP master mode we need to set the PDIR for the clock pins and fix
the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above
AMUTE.

This went unnoticed as most of the boards uses McASP as slave and neither
of these issues are visible (audible) in those setups.

Fixes: ca3d9433 ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

When there is an event on codec to codec dai_link, we only need to deal
with params if the event is SND_SOC_DAPM_PRE_PMU, when .hw_params() is
called. For the other events, it is useless.

Also, dealing with the codec to codec params just before calling
.hw_params() callbacks give change to either party on the link to alter
params content in .startup(), which might be useful in some cases
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-4-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

At the moment, codec to codec dai link widgets are named after the
cpu dai and the 1st codec valid on the link. This might be confusing
if there is multiple valid codecs on the link for one stream
direction.

Instead, use the dai link name and the stream direction to name the
the dai link widget
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-3-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

When handling dai_link events on codec to codec links, run all .startup()
callbacks on sinks and sources before running any .hw_params(). Same goes
for hw_free() and shutdown(). This is closer to the behavior of regular
dai links
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-2-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Adds the codec driver for the CS47L92 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.
Signed-off-by: Stuart Henderson <stuarth@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190725163931.24964-3-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Adds the codec driver for the CS47L15 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Jaswinder Jassal <jjassal@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190725163931.24964-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is no need for end drivers to add helper functions to allow the
bus error handler to be called, simply update the prototype so it can be
called directly.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190725163931.24964-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the proper module name. The objs assignments are already there.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>0
Link: https://lore.kernel.org/r/20190725133743.22145-1-perex@perex.czSigned-off-by: Mark Brown <broonie@kernel.org>

When multiple serializers are used we need to track the number of
serializers used by the other stream direction to avoid killing data lines
when the first stream used more serializers than the second would need.
We are still protected against the case when the second stream uses more
serializers which had affected the running stream as well.

To take advantage of the improved serializer logic we need to modify the
channel constraints rule as well to allow the use of multiple serializers
for the second stream as additional ones will not affect the FS/BCLK on
the bus.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083432.7419-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

The formater unit's rotation needs to be programmed differently for right
aligned bus format to have the data moved to the correct place.

Take the opportunity and simplify the formater unit setup code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083411.7211-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

If multi DIN/DOUT mode is selected (tdm_slots == 2) then configure the
channel constraint to allow all channels.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083321.6776-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

With removal of MCPS, CPS and CPC ambiguity, ibs and obs params for
struct skl_module_cfg have been left unused. Update struct declaration
by removing these two.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-8-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

As per FW Interface Modules Configuration, init instance IPC request
requires base initial module configuration. This configuration structure
is made of:
- cpc (chunks per cycle)
- ibs (input buffer size)
- obs (output buffer size)
- is_pages (memory pages required)
- audio_fmt (self explanatory)

Skylake topology accepts following tokens: MCPS, CPS and CPC. All of
these are directly connected. Moreover, assigning one of these allows
to calculate the remaining two. In simplest scenario and assuming 1ms
scheduling, following is true:

CPS = CPC times 1000
MCPS = CPS times 1000 000
Note: these calculations vary depending on scenario and scheduling
requirements.

Given the current implementation, userspace is allowed to provide
different values for all three causing informational chaos. On top of
that, struct skl_base_cfg which represents base module configuration,
incorrectly takes CPS param instead of CPC.

This ambiguity may lead to user unintentionally providing improper
values to DSP firmware and thus impacting module scheduling in
unexpected fashion. Fix by making MCPS and CPS topology params obsolete
and relying solely on CPC value.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-7-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

As per FW team recommendation we should not disable notifications.
By default, all notifications are enabled in DSP firmware. These
notifications provide a vital information whenever an error occurs.

Currently, driver disables them during boot sequences. By doing so,
Skylake may silently ignore severe stream errors.
Correct that by removing permissive code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-6-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current memory availability check is a stub, while actual memory
management takes place in firmware. Leave this task to firmware entirely
and remove redundant code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-5-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The entire logic for MCPS calculation and DSP scheduling is found
within DSP firmware. Currently driver implements simplistic, inaccurate
logic itself which may prevent pipeline creation despite firmware being
completely fine its parameters.

Remove that logic and leave the MCPS calculation to DSP alone.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-4-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

As both modules are core part of Skylake driver and none can live
without the other, combine snd_soc_skl_ipc and snd_soc_skl.

It's highly probable IPC module was to be treated as an interface for
platform specific code implementations e.g.: possibility of existence of
BXT specific code without SKL one. However, most funtionalities are
being inherited from one DSP firmware to another, and thus this
assumption fails.

skl-sst, bxt-sst and cnl-sst are not individuals pointing respectively
to SKL (cAVS 1.5), BXT (cAVS 1.5+) & CNL (cAVS 1.8) standalone
implementations. Code found within these is shared among all platforms
whenever necessary to avoid code duplication and reduce development
burden.

Merge also helps in cleaning up internal code in future changes.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-3-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Skylake driver is divided into two modules:
- snd_soc_skl
- snd_soc_skl_ipc

and nothing would be wrong if not for the fact that both cannot exist
without one another. IPC module is not some kind of extension, as it is
the case for snd_hda_ext_core which is separated from snd_hda_core -
legacy hda interface. It's as much core Skylake module as snd_soc_skl
is.

Statement backed up by existence of circular dependency between this
two. To eliminate said problem, struct skl_sst has been created. From
that very momment, Skylake has been plagued by header errors (incomplete
structs, unknown references etc.) whenever something new is to be added
or code is cleaned up.

As this design is being corrected, struct skl_sst is no longer needed,
so combine it with struct skl. To avoid ambiguity when searching for skl
stuff (struct skl *skl) it has also been renamed to skl_dev.

No functional changes.
Signed-off-by: Piotr Maziarz <piotrx.maziarz@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-2-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This should be 'wm8955_pll_factors()' instead.
Fix it and use it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190724052632.30476-1-christophe.jaillet@wanadoo.frSigned-off-by: Mark Brown <broonie@kernel.org>

If the DAI format setup fails, there is no valid communication format
between CPU and CODEC, so fail card instantiation, rather than continue
with a card that will most likely not function properly.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.20.1907241132350.6338@lnxricardw1.se.axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

snd_soc_dai_stream_valid() is function to check stream validity.
But, some code is using it, some code are checking stream->channels_min
directly. Doing samethings by different method is confusable.
This patch uses same funcntion for same purpose.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ftmyhmzz.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

ALSA SoC already has snd_soc_dai_digital_mute() for digital_mute,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ef2ihmzo.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_compress_new() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h87ehn1a.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_remvoe() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imruhn1x.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_probe() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k1cahn26.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_resume() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfwqhn2j.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_suspend() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87muh6hn2x.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_delay() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o91mhn3i.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_bespoke_trigger() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r26ihn3u.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_trigger() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgqyhn40.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_prepare() and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tvbehn46.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>