- 22 Jun, 2020 40 commits
-
-
Michael Ellerman authored
commit 912c0a7f upstream. At boot the FSCR is initialised via one of two paths. On most systems it's set to a hard coded value in __init_FSCR(). On newer skiboot systems we use the device tree CPU features binding, where firmware can tell Linux what bits to set in FSCR (and HFSCR). In both cases the value that's configured at boot is not propagated into the init_task.thread.fscr value prior to the initial fork of init (pid 1), which means the value is not used by any processes other than swapper (the idle task). For the __init_FSCR() case this is OK, because the value in init_task.thread.fscr is initialised to something sensible. However it does mean that the value set in __init_FSCR() is not used other than for swapper, which is odd and confusing. The bigger problem is for the device tree CPU features case it prevents firmware from setting (or clearing) FSCR bits for use by user space. This means all existing kernels can not have features enabled/disabled by firmware if those features require setting/clearing FSCR bits. We can handle both cases by saving the FSCR value into init_task.thread.fscr after we have initialised it at boot. This fixes the bug for device tree CPU features, and will allow us to simplify the initialisation for the __init_FSCR() case in a future patch. Fixes: 5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200527145843.2761782-3-mpe@ellerman.id.auSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit 993e3d96 upstream. The device tree CPU features binding includes FSCR bit numbers which Linux is instructed to set by firmware. Whether that's a good idea or not, in the case of the DSCR the Linux implementation has a hard requirement that the FSCR_DSCR bit not be set by default. We use it to track when a process reads/writes to DSCR, so it must be clear to begin with. So if firmware tells us to set FSCR_DSCR we must ignore it. Currently this does not cause a bug in our DSCR handling because the value of FSCR that the device tree CPU features code establishes is only used by swapper. All other tasks use the value hard coded in init_task.thread.fscr. However we'd like to fix that in a future commit, at which point this will become necessary. Fixes: 5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
-
Michael Ellerman authored
commit 93900337 upstream. create_cpu_loop() calls smu_sat_get_sdb_partition() which does kmalloc() and returns the allocated buffer. In fact it's called twice, and neither buffer is freed. This results in a memory leak as reported by Erhard: unreferenced object 0xc00000047081f840 (size 32): comm "kwindfarm", pid 203, jiffies 4294880630 (age 5552.877s) hex dump (first 32 bytes): c8 06 02 7f ff 02 ff 01 fb bf 00 41 00 20 00 00 ...........A. .. 00 07 89 37 00 a0 00 00 00 00 00 00 00 00 00 00 ...7............ backtrace: [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat] [<000000003010fcb7>] .pm112_wf_notify+0x104c/0x13bc [windfarm_pm112] [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180 [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90 [<00000000131d8149>] .wf_thread_func+0x114/0x1a0 [<000000000d54838d>] .kthread+0x13c/0x190 [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64 unreferenced object 0xc0000004737089f0 (size 16): comm "kwindfarm", pid 203, jiffies 4294880879 (age 5552.050s) hex dump (first 16 bytes): c4 04 01 7f 22 11 e0 e6 ff 55 7b 12 ec 11 00 00 ...."....U{..... backtrace: [<0000000083f0a65c>] .smu_sat_get_sdb_partition+0xc4/0x2d0 [windfarm_smu_sat] [<00000000b94ef7e1>] .pm112_wf_notify+0x1294/0x13bc [windfarm_pm112] [<00000000b958b2dd>] .notifier_call_chain+0xa8/0x180 [<0000000070490868>] .blocking_notifier_call_chain+0x64/0x90 [<00000000131d8149>] .wf_thread_func+0x114/0x1a0 [<000000000d54838d>] .kthread+0x13c/0x190 [<00000000669b72bc>] .ret_from_kernel_thread+0x58/0x64 Fix it by rearranging the logic so we deal with each buffer separately, which then makes it easy to free the buffer once we're done with it. Fixes: ac171c46 ("[PATCH] powerpc: Thermal control for dual core G5s") Cc: stable@vger.kernel.org # v2.6.16+ Reported-by:
Erhard F. <erhard_f@mailbox.org> Signed-off-by:
-
Jonathan Bakker authored
commit 869d42e6 upstream. SDHCI1 is connected to a BCM4329 WiFi/BT chip which requires power to be kept over suspend. As the surrounding hardware supports this, mark it as such. This fixes WiFi after a suspend/resume cycle. Fixes: 17064246 ("ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones") Cc: <stable@vger.kernel.org> Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Ludovic Desroches authored
commit baa998ae upstream. The gpio property for the vbus pin doesn't match the pinctrl and is not correct. Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: 42ed5355 "ARM: dts: at91: introduce the sama5d2 ptc ek board" Cc: stable@vger.kernel.org # 4.19 and later Link: https://lore.kernel.org/r/20200401221947.41502-1-ludovic.desroches@microchip.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marek Szyprowski authored
commit 8807d356 upstream. GPIO lines for the CM36651 sensor I2C bus use the normal not the inverted polarity. This bug has been there since adding the CM36651 sensor by commit 85cb4e0b ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2"), but went unnoticed because the "i2c-gpio" driver ignored the GPIO polarity specified in the device-tree. The recent conversion of "i2c-gpio" driver to the new, descriptor based GPIO API, automatically made it the DT-specified polarity aware, what broke the CM36651 sensor operation. Fixes: 85cb4e0b ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2") CC: stable@vger.kernel.org # 4.16+ Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Dmitry Osipenko authored
commit 35509737 upstream. The PL310 Auxiliary Control Register shouldn't have the "Full line of zero" optimization bit being set before L2 cache is enabled. The L2X0 driver takes care of enabling the optimization by itself. This patch fixes a noisy error message on Tegra20 and Tegra30 telling that cache optimization is erroneously enabled without enabling it for the CPU: L2C-310: enabling full line of zeros but not enabled in Cortex-A9 Cc: <stable@vger.kernel.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
Nicolas Chauvet <kwizart@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Douglas Anderson authored
commit b5945214 upstream. cpu_pm_notify() is basically a wrapper of notifier_call_chain(). notifier_call_chain() doesn't initialize *nr_calls to 0 before it starts incrementing it--presumably it's up to the callers to do this. Unfortunately the callers of cpu_pm_notify() don't init *nr_calls. This potentially means you could get too many or two few calls to CPU_PM_ENTER_FAILED or CPU_CLUSTER_PM_ENTER_FAILED depending on the luck of the stack. Let's fix this. Fixes: ab10023e ("cpu_pm: Add cpu power management notifiers") Cc: stable@vger.kernel.org Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200504104917.v6.3.I2d44fc0053d019f239527a4e5829416714b7e299@changeidSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Mikulas Patocka authored
commit 54505a1e upstream. The commits cd0e00c1 and 92d7223a broke boot on the Alpha Avanti platform. The patches move memory barriers after a write before the write. The result is that if there's iowrite followed by ioread, there is no barrier between them. The Alpha architecture allows reordering of the accesses to the I/O space, and the missing barrier between write and read causes hang with serial port and real time clock. This patch makes barriers confiorm to the specification. 1. We add mb() before readX_relaxed and writeX_relaxed - memory-barriers.txt claims that these functions must be ordered w.r.t. each other. Alpha doesn't order them, so we need an explicit barrier. 2. We add mb() before reads from the I/O space - so that if there's a write followed by a read, there should be a barrier between them. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Fixes: cd0e00c1 ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering") Fixes: 92d7223a ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering #2") Cc: stable@vger.kernel.org # v4.17+ Acked-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Eric Biggers authored
commit 64611a15 upstream. queue_limits::logical_block_size got changed from unsigned short to unsigned int, but it was forgotten to update crypt_io_hints() to use the new type. Fix it. Fixes: ad6bf88a ("block: fix an integer overflow in logical block size") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Al Viro authored
commit 142cd252 upstream. We do need access_process_vm() to access the target's reg_window. However, access to caller's memory (storing the result in genregs32_get(), fetching the new values in case of genregs32_set()) should be done by normal uaccess primitives. Fixes: ad4f9576 ([SPARC64]: Fix user accesses in regset code.) Cc: stable@kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit cf51e129 upstream. It needs access_process_vm() if the traced process does not share mm with the caller. Solution is similar to what sparc64 does. Note that genregs32_set() is only ever called with pos being 0 or 32 * sizeof(u32) (the latter - as part of PTRACE_SETREGS handling). Cc: stable@kernel.org Signed-off-by:
-
Wei Yongjun authored
commit 43d7ce70 upstream. Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. This avoids a use-after-free in case the driver is later unbound. Fixes: d2efbbd1 ("gnss: add driver for sirfstar-based receivers") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> [ johan: amend commit message; mention potential use-after-free ] Cc: stable <stable@vger.kernel.org> # 4.19 Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jonathan Bakker authored
commit f354157a upstream. Currently, for EINT_TYPE GPIOs, the CON and FLTCON registers are saved and restored over a suspend/resume cycle. However, the EINT_MASK registers are not. On S5PV210 at the very least, these registers are not retained over suspend, leading to the interrupts remaining masked upon resume and therefore no interrupts being triggered for the device. There should be no effect on any SoCs that do retain these registers as theoretically we would just be re-writing what was already there. Fixes: 7ccbc60c ("pinctrl: exynos: Handle suspend/resume of GPIO EINT registers") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jonathan Bakker authored
commit b577a279 upstream. Commit a8be2af0 ("pinctrl: samsung: Write external wakeup interrupt mask") started writing the eint wakeup mask from the pinctrl driver. Unfortunately, it made the assumption that the private retention data was always a regmap while in the case of s5pv210 it is a raw pointer to the clock base (as the eint wakeup mask not in the PMU as with newer Exynos platforms). Fixes: a8be2af0 ("pinctrl: samsung: Write external wakeup interrupt mask") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Anders Roxell authored
commit 73174acc upstream. Make sure that the POWER_RESET_VEXPRESS driver won't have bind/unbind attributes available via the sysfs, so lets be explicit here and use ".suppress_bind_attrs = true" to prevent userspace from doing something silly. Link: https://lore.kernel.org/r/20200527112608.3886105-2-anders.roxell@linaro.org Cc: stable@vger.kernel.org Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Kai-Heng Feng authored
commit 165ae7a8 upstream. igb device gets runtime suspended when there's no link partner. We can't get correct speed under that state: $ cat /sys/class/net/enp3s0/speed 1000 In addition to that, an error can also be spotted in dmesg: [ 385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost Since device can only be runtime suspended when there's no link partner, we can skip reading register and let the following logic set speed and duplex with correct status. The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks. However, for this particular issue, begin() calls igb_runtime_resume() , which tries to rtnl_lock() while the lock is already hold by upper ethtool layer. So let's take this approach until the igb_runtime_resume() no longer needs to hold rtnl_lock. CC: stable <stable@vger.kernel.org> Suggested-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Tomi Valkeinen authored
commit bfcba38d upstream. v4l2_ctrl_handler_free() uses hdl->lock, which in ov5640 driver is set to sensor's own sensor->lock. In ov5640_remove(), the driver destroys the sensor->lock first, and then calls v4l2_ctrl_handler_free(), resulting in the use of the destroyed mutex. Fix this by calling moving the mutex_destroy() to the end of the cleanup sequence, as there's no need to destroy the mutex as early as possible. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # v4.14+ Reviewed-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Larry Finger authored
commit 6a29d134 upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43legacy did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43legacy will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200526155909.5807-3-Larry.Finger@lwfinger.netSigned-off-by:
-
Larry Finger authored
commit 75d057bd upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43 did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43 will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Reported-and-tested-by:
Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by:
-
Larry Finger authored
commit ec4d3e3a upstream. This patch fixes commit 75388acd ("add mac80211-based driver for legacy BCM43xx devices") In https://bugzilla.kernel.org/show_bug.cgi?id=207093, a defect in b43legacy is reported. Upon testing, thus problem exists on PPC and X86 platforms, is present in the oldest kernel tested (3.2), and has been present in the driver since it was first added to the kernel. The problem is a corrupted channel status received from the device. Both the internal card in a PowerBook G4 and the PCMCIA version (Broadcom BCM4306 with PCI ID 14e4:4320) have the problem. Only Rev, 2 (revision 4 of the 802.11 core) of the chip has been tested. No other devices using b43legacy are available for testing. Various sources of the problem were considered. Buffer overrun and other sources of corruption within the driver were rejected because the faulty channel status is always the same, not a random value. It was concluded that the faulty data is coming from the device, probably due to a firmware bug. As that source is not available, the driver must take appropriate action to recover. At present, the driver reports the error, and them continues to process the bad packet. This is believed that to be a mistake, and the correct action is to drop the correpted packet. Fixes: 75388acd ("add mac80211-based driver for legacy BCM43xx devices") Cc: Stable <stable@vger.kernel.org> Signed-off-by:
-
Michał Mirosław authored
commit 81bd5d0c upstream. When BT module can't be initialized, but it has an IRQ, unloading the driver WARNs when trying to free not-yet-requested IRQ. Fix it by noting whether the IRQ was requested. WARNING: CPU: 2 PID: 214 at kernel/irq/devres.c:144 devm_free_irq+0x49/0x4ca [...] WARNING: CPU: 2 PID: 214 at kernel/irq/manage.c:1746 __free_irq+0x8b/0x27c Trying to free already-free IRQ 264 Modules linked in: hci_uart(-) btbcm bluetooth ecdh_generic ecc libaes CPU: 2 PID: 214 Comm: rmmod Tainted: G W 5.6.1mq-00044-ga5f9ea098318-dirty #928 [...] [<b016aefb>] (devm_free_irq) from [<af8ba1ff>] (bcm_close+0x97/0x118 [hci_uart]) [<af8ba1ff>] (bcm_close [hci_uart]) from [<af8b736f>] (hci_uart_unregister_device+0x33/0x3c [hci_uart]) [<af8b736f>] (hci_uart_unregister_device [hci_uart]) from [<b035930b>] (serdev_drv_remove+0x13/0x20) [<b035930b>] (serdev_drv_remove) from [<b037093b>] (device_release_driver_internal+0x97/0x118) [<b037093b>] (device_release_driver_internal) from [<b0370a0b>] (driver_detach+0x2f/0x58) [<b0370a0b>] (driver_detach) from [<b036f855>] (bus_remove_driver+0x41/0x94) [<b036f855>] (bus_remove_driver) from [<af8ba8db>] (bcm_deinit+0x1b/0x740 [hci_uart]) [<af8ba8db>] (bcm_deinit [hci_uart]) from [<af8ba86f>] (hci_uart_exit+0x13/0x30 [hci_uart]) [<af8ba86f>] (hci_uart_exit [hci_uart]) from [<b01900bd>] (sys_delete_module+0x109/0x1d0) [<b01900bd>] (sys_delete_module) from [<b0101001>] (ret_fast_syscall+0x1/0x5a) [...] Cc: stable@vger.kernel.org Fixes: 6cc4396c ("Bluetooth: hci_bcm: Add wake-up capability") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Chuhong Yuan authored
commit 9453264e upstream. go7007_snd_init() misses a snd_card_free() in an error path. Add the missed call to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Salvatore Bonaccorso <carnil@debian.org> Signed-off-by:
-
Christian Lamparter authored
commit b14fba7e upstream. This patch follows up on a bug-report by Frank Schäfer that discovered P2P GO wasn't working with wpa_supplicant. This patch removes part of the broken P2P GO support but keeps the vif switchover code in place. Cc: <stable@vger.kernel.org> Link: <https://lkml.kernel.org/r/3a9d86b6-744f-e670-8792-9167257edef8@googlemail.com> Reported-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Punit Agrawal authored
commit d601afca upstream. It's an error if the value of the RX/TX tail descriptor does not match what was written. The error condition is true regardless the duration of the interference from ME. But the driver only performs the reset if E1000_ICH_FWSM_PCIM2PCI_COUNT (2000) iterations of 50us delay have transpired. The extra condition can lead to inconsistency between the state of hardware as expected by the driver. Fix this by dropping the check for number of delay iterations. While at it, also make __ew32_prepare() static as it's not used anywhere else. CC: stable <stable@vger.kernel.org> Signed-off-by:
Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by:
-
Kai-Heng Feng authored
commit f2980103 upstream. Commit b10effb9 ("e1000e: fix buffer overrun while the I219 is processing DMA transactions") imposes roughly 30% performance penalty. The commit log states that "Disabling TSO eliminates performance loss for TCP traffic without a noticeable impact on CPU performance", so let's disable TSO by default to regain the loss. CC: stable <stable@vger.kernel.org> Fixes: b10effb9 ("e1000e: fix buffer overrun while the I219 is processing DMA transactions") BugLink: https://bugs.launchpad.net/bugs/1802691Signed-off-by:
-
Ashok Raj authored
commit aa0ce96d upstream. Root Complex Integrated Endpoints (RCiEPs) do not have an upstream bridge, so pci_configure_mps() previously ignored them, which may result in reduced performance. Instead, program the Max_Payload_Size of RCiEPs to the maximum supported value (unless it is limited for the PCIE_BUS_PEER2PEER case). This also affects the subsequent programming of Max_Read_Request_Size because Linux programs MRRS based on the MPS value. Fixes: 9dae3a97 ("PCI: Move MPS configuration check to pci_configure_device()") Link: https://lore.kernel.org/r/1585343775-4019-1-git-send-email-ashok.raj@intel.comTested-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Roberto Sassu authored
[ Upstream commit 6cc7c266 ] If the template field 'd' is chosen and the digest to be added to the measurement entry was not calculated with SHA1 or MD5, it is recalculated with SHA1, by using the passed file descriptor. However, this cannot be done for boot_aggregate, because there is no file descriptor. This patch adds a call to ima_calc_boot_aggregate() in ima_eventdigest_init(), so that the digest can be recalculated also for the boot_aggregate entry. Cc: stable@vger.kernel.org # 3.13.x Fixes: 3ce1217d ("ima: define template fields library and new helpers") Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Filipe Manana authored
[ Upstream commit e2c8e92d ] If an error happens while running dellaloc in COW mode for a range, we can end up calling extent_clear_unlock_delalloc() for a range that goes beyond our range's end offset by 1 byte, which affects 1 extra page. This results in clearing bits and doing page operations (such as a page unlock) outside our target range. Fix that by calling extent_clear_unlock_delalloc() with an inclusive end offset, instead of an exclusive end offset, at cow_file_range(). Fixes: a315e68f ("Btrfs: fix invalid attempt to free reserved space on failure to cow range") CC: stable@vger.kernel.org # 4.14+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Omar Sandoval authored
[ Upstream commit 6d3113a1 ] In btrfs_submit_direct_hook(), if a direct I/O write doesn't span a RAID stripe or chunk, we submit orig_bio without cloning it. In this case, we don't increment pending_bios. Then, if btrfs_submit_dio_bio() fails, we decrement pending_bios to -1, and we never complete orig_bio. Fix it by initializing pending_bios to 1 instead of incrementing later. Fixing this exposes another bug: we put orig_bio prematurely and then put it again from end_io. Fix it by not putting orig_bio. After this change, pending_bios is really more of a reference count, but I'll leave that cleanup separate to keep the fix small. Fixes: e65e1535 ("btrfs: fix panic caused by direct IO") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Abhishek Sahu authored
[ Upstream commit a17beb1a ] Although not allowed by the PCI specs, some multi-function devices have power dependencies between the functions. For example, function 1 may not work unless function 0 is in the D0 power state. The existing quirk_gpu_hda() adds a device link to express this dependency for GPU and HDA devices, but it really is not specific to those device types. Generalize it and rename it to pci_create_device_link() so we can create dependencies between any "consumer" and "producer" functions of a multi-function device, where the consumer is only functional if the producer is in D0. This reorganization should not affect any functionality. Link: https://lore.kernel.org/lkml/20190606092225.17960-2-abhsahu@nvidia.comSigned-off-by:
Abhishek Sahu <abhsahu@nvidia.com> [bhelgaas: commit log, reword diagnostic] Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 7cf2cba4 ] Most of the ACS quirks have a similar pattern of: acs_flags &= ~( <controls provided by this device> ); return acs_flags ? 0 : 1; Pull this out into a helper function to simplify the quirks slightly. The helper function is also a convenient place for comments about what the list of ACS controls means. No functional change intended. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit c8de8ed2 ] The ACS quirks differ in needless ways, which makes them look more different than they really are. Reorder the ACS flags in order of definitions in the spec: PCI_ACS_SV Source Validation PCI_ACS_TB Translation Blocking PCI_ACS_RR P2P Request Redirect PCI_ACS_CR P2P Completion Redirect PCI_ACS_UF Upstream Forwarding PCI_ACS_EC P2P Egress Control PCI_ACS_DT Direct Translated P2P (PCIe r5.0, sec 7.7.8.2) and use similar code structure in all. No functional change intended. Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 62a7f300 ] Move the IDs to pci_ids.h so it can be used by next patch. Link: https://lore.kernel.org/r/20200508065343.32751-1-kai.heng.feng@canonical.comSigned-off-by:
-
Tiezhu Yang authored
[ Upstream commit 9acb9fe1 ] Add the Loongson vendor ID to pci_ids.h to be used by the controller driver in the future. The Loongson vendor ID can be found at the following link: https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/tree/pci.idsSigned-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Yazen Ghannam authored
[ Upstream commit b3f79ae4 ] Add the new PCI Device 18h IDs for AMD Family 19h systems. Note that Family 19h systems will not have a new PCI root device ID. Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200110015651.14887-4-Yazen.Ghannam@amd.comSigned-off-by:
-
Jon Derrick authored
[ Upstream commit ec11e5c2 ] This patch adds support for this VMD device which supports the bus restriction mode. Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Jonathan Chocron authored
[ Upstream commit 4a36a60c ] Add Amazon's Annapurna Labs vendor ID to pci_ids.h. Signed-off-by:
Jonathan Chocron <jonnyc@amazon.com> Signed-off-by:
Andrew Murray <andrew.murray@arm.com> Acked-by:
-
Ben Chuang authored
[ Upstream commit 4460d68f ] Add the Genesys Logic, Inc. vendor ID to pci_ids.h. Signed-off-by:
Ben Chuang <ben.chuang@genesyslogic.com.tw> Co-developed-by:
Michael K Johnson <johnsonm@danlj.org> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Tim Blechmann authored
[ Upstream commit 789492f0 ] The pci express variant of the digigram lx6464es card has a different device ID, but works without changes to the driver. Thanks to Nikolas Slottke for reporting and testing. Signed-off-by:
Tim Blechmann <tim@klingt.org> Link: https://lore.kernel.org/r/20190906082119.40971-1-tim@klingt.orgSigned-off-by:
-
