Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(),
there is no counterpart of_node_get() for it.

Fixes: d2b67744 ("pinctrl: bcm2835: implement hook for missing gpio-ranges")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-3-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The ->add_pin_ranges() is supposed to be called for the backward
compatiblity on Device Tree platforms or non-DT ones. Ensure that
by checking presense of the "gpio-ranges" property.

This allows to clean up a few existing drivers to avoid duplication
of the check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-2-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

linux/seq_file.h is included more than once.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301161545238948580@zte.com.cnSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The driver doesn't depend on the OF to be complied. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-2-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112185122.45216-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184923.80442-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184340.79606-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Replace mentioning of legacy API by the latest one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230112134849.59534-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-7-arinc.unal@arinc9.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-6-arinc.unal@arinc9.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-5-arinc.unal@arinc9.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-4-arinc.unal@arinc9.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-3-arinc.unal@arinc9.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

These variables define a list of functions which can be muxed to the pin
group which the name of the pin group was originally intended to be pointed
out on the name of the said variables.

Therefore, rename "func" to "grp" across all subdrivers where this applies.

Fixes: 18653d4b ("pinctrl: ralink: rename variable names for functions on MT7620 and MT7621")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-2-arinc.unal@arinc9.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-512-uwe@kleine-koenig.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Allow bias-bus-hold and input-enable properties (already used in SM8450):

  sm8450-qrd.dtb: pinctrl@3440000: dmic02-default-state: 'oneOf' conditional failed, one must be fixed:
    'pins' is a required property
    'function' is a required property
    'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
    'input-enable' does not match any of the regexes: 'pinctrl-[0-9]+'

Compact the properties which are just set to true for readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221222161420.172824-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The SM8450 has GPIOs from 0 to 209, so 210 in total:

  sm8450-sony-xperia-nagara-pdx223.dtb: pinctrl@f100000: gpio-line-names:
    ['NC', 'NC', 'NC', 'NC', 'WLC_I2C_SDA', 'WLC_I2C_SCL', ...
     'APPS_I2C_0_SDA', 'APPS_I2C_0_SCL', 'CCI_I2C3_SDA', 'CCI_I2C3_SCL'] is too long

Fixes: 9779ed30 ("dt-bindings: pinctrl: qcom,sm8450-pinctrl: add gpio-line-names")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221223132226.81340-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl_get_group_selector() prints an error message when group
is not found in the list. No need to repeat this in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230109132719.86009-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-511-uwe@kleine-koenig.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the general purpose clocks that are found on MSM8226.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Co-developed-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Link: https://lore.kernel.org/r/20230106114403.275865-3-matti.lehtimaki@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Document the general purpose clock functions that are found on MSM8226.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230106114403.275865-2-matti.lehtimaki@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The i.MX8MM/N/P/Q IOMUXC schemas are basically the same, it does not to
have four schemas for almost the same binding.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230104021430.3503497-1-peng.fan@oss.nxp.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550 & pmr735d
gpio controllers providing GPIO control over SPMI.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-spmi-v2-3-b839bf2d558a@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom,pmic-gpio: document pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550 & pmr735d

Document compatible, pin count & pin names for pm8550, pm8550b, pm8550ve,
pm8550vs, pmk8550 & pmr735d SPMI GPIO controllers.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-spmi-v2-2-b839bf2d558a@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

of_find_node_by_phandle() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: d3e51161 ("pinctrl: add pinctrl driver for Rockchip SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102112845.3982407-1-linmq006@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: d86f4d71 ("pinctrl: stm32: check irq controller availability at probe")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102082503.3944927-1-linmq006@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Adjust names of function for wcss pins, also fix third gpio in bt group.

Fixes: bcd11493 ("pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20221231164250.74550-1-a39.skl@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add pinctrl driver for TLMM block found in SM8550 SoC.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221230203637.2539900-3-abel.vesa@linaro.orgReviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add device tree binding Documentation details for Qualcomm SM8550
TLMM device
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221230203637.2539900-2-abel.vesa@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add pin control driver for the TLMM block found in the QDU1000
and QRU1000 SoC.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221216230852.21691-3-quic_molvera@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add device tree bindings for QDU1000 and QRU1000 TLMM devices.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221216230852.21691-2-quic_molvera@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add device tree bindings for the RZ/G2L Port Output Enable for GPT (POEG).
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221215213206.56666-2-biju.das.jz@bp.renesas.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

With the old SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, some configs result in a
build warning:

drivers/pinctrl/pinctrl-at91.c:1668:12: error: 'at91_gpio_resume' defined but not used [-Werror=unused-function]
 1668 | static int at91_gpio_resume(struct device *dev)
      |            ^~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-at91.c:1650:12: error: 'at91_gpio_suspend' defined but not used [-Werror=unused-function]
 1650 | static int at91_gpio_suspend(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/20221215164301.934805-1-arnd@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.

Here, expressions to convert pin configurations to booleans for pull-up,
voltage and mA are macro definitions that begin with "CONFIG".

To avoid defines prefixed with "CONFIG", rename these defines to begin with
"PIN_CONFIG" instead.

No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20221215092128.3954-1-lukas.bulwahn@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221213182322.962345-1-u.kleine-koenig@pengutronix.deSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221213182125.929303-1-u.kleine-koenig@pengutronix.deSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

GPIO registers include Bit 27 for WakeCntrlZ used to enable wake in
Z state. Hence add Z-state wake control bits to debugfs output to
debug and analyze Z-states problems.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Link: https://lore.kernel.org/r/20221208093704.1151928-1-Basavaraj.Natikar@amd.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>