- 16 Nov, 2022 4 commits
-
-
Felix Fietkau authored
- pass the tag to DSA via metadata dst - disabled on 7986 for now, since it's not working yet - disabled if a MAC is enabled that does not use DSA This improves performance by bypassing the DSA tag driver and avoiding extra skb data mangling Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Felix Fietkau authored
Keep the vlan rx offload feature in sync across all netdevs belonging to the device, since the feature is global and can't be turned off per MAC Signed-off-by:
-
Felix Fietkau authored
Use the id from the DMA descriptor instead of hardcoding 802.1q Signed-off-by:
-
Felix Fietkau authored
If a metadata dst is present with the type METADATA_HW_PORT_MUX on a dsa cpu port netdev, assume that it carries the port number and that there is no DSA tag present in the skb data. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 15 Nov, 2022 6 commits
-
-
Daniel Machon authored
This patch fixes a frame size warning, reported by kernel test robot. >> net/dcb/dcbnl.c:1230:1: warning: the frame size of 1244 bytes is >> larger than 1024 bytes [-Wframe-larger-than=] The getapptrust part of dcbnl_ieee_fill is moved to a separate function, and the selector array is now dynamically allocated, instead of stack allocated. Tested on microchip sparx5 driver. Fixes: 6182d587 ("net: dcb: add new apptrust attribute") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20221114092950.2490451-1-daniel.machon@microchip.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jamie Bainbridge authored
The SYN flood message prints the listening port number, but with many processes bound to the same port on different IPs, it's impossible to tell which socket is the problem. Add the listen IP address to the SYN flood message. For IPv6 use "[IP]:port" as per RFC-5952 and to provide ease of copy-paste to "ss" filters. For IPv4 use "IP:port" to match. Each protcol's "any" address and a host address now look like: Possible SYN flooding on port 0.0.0.0:9001. Possible SYN flooding on port 127.0.0.1:9001. Possible SYN flooding on port [::]:9001. Possible SYN flooding on port [fc00::1]:9001. Signed-off-by:
Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/4fedab7ce54a389aeadbdc639f6b4f4988e9d2d7.1668386107.git.jamie.bainbridge@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Thomas Gleixner says: ==================== genirq/msi: Treewide cleanup of pointless linux/msi.h includes While working on per device MSI domains I noticed that quite some files include linux/msi.h just because. The top level comment in the header file clearly says: Regular device drivers have no business with any of these functions.... and actually none of the drivers needs anything from msi.h. ==================== Link: https://lore.kernel.org/r/20221113201935.776707081@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
Nothing in these files needs anything from linux/msi.h Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: oss-drivers@corigine.com Acked-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Thomas Gleixner authored
Nothing in these file needs anything from linux/msi.h Signed-off-by:
-
Yoshihiro Shimoda authored
If CONFIG_PTP_1588_CLOCK_OPTIONAL=m and CONFIG_RENESAS_ETHER_SWITCH=y, the following build error happened: aarch64-linux-ld: DWARF error: could not find abbrev number 60 drivers/net/ethernet/renesas/rswitch.o: in function `rswitch_get_ts_info': rswitch.c:(.text+0x408): undefined reference to `ptp_clock_index' aarch64-linux-ld: DWARF error: could not find abbrev number 1190123 drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_register': rcar_gen4_ptp.c:(.text+0x4dc): undefined reference to `ptp_clock_register' aarch64-linux-ld: drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_unregister': rcar_gen4_ptp.c:(.text+0x584): undefined reference to `ptp_clock_unregister' To fix the issue, add "depends on PTP_1588_CLOCK_OPTIONAL" into the Kconfig. Reported-by:Arnd Bergmann <arnd@arndb.de> Fixes: 6c6fa1a0 ("net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP support") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221110012720.3552060-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
- 14 Nov, 2022 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2022-11-12 Misc updates to mlx5 driver 1) Support enhanced CQE compression, on ConnectX6-Dx Reduce irq rate, cpu utilization and latency. 2) Connection tracking: Optimize the pre_ct table lookup for rules installed on chain 0. 3) implement ethtool get_link_ext_stats for PHY down events 4) Expose device vhca_id to debugfs 5) misc cleanups and trivial changes ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Shenwei Wang authored
Added xdp and page pool statistics. In order to make the implementation simple and compatible, the patch uses the 32bit integer to record the XDP statistics. Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Reported-by:
-
David S. Miller authored
Steen Hegelund says: ==================== net: Add support for sorted VCAP rules in Sparx5 This provides support for adding Sparx5 VCAP rules in sorted order, VCAP rule counters and TC filter matching on ARP frames. It builds on top of the initial IS2 VCAP support found in these series: https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/ https://lore.kernel.org/all/20221109114116.3612477-1-steen.hegelund@microchip.com/ Functionality ============= When a new VCAP rule is added the driver will now ensure that the rule is inserted in sorted order, and when a rule is removed, the remaining rules will be moved to keep the sorted order and remove any gaps in the VCAP address space. A VCAP rule is ordered using these 3 values: - Rule size: the count of VCAP addresses used by the rule. The largest rule have highest priority - Rule User: The rules are ordered by the user enumeration - Priority: The priority provided in the flower filter. The lowest value has the highest priority. A VCAP instance may contain the counter as part of the VCAP cache area, and this counter may be one or more bits in width. This type of counter automatically increments its value when the rule is hit. Other VCAP instances have a dedicated counter area outside of the VCAP and in this case the rule must contain the counter id to be able to locate the counter value and cause the counter to be incremented. In this case there must also be a VCAP rule action that sets the counter id. The Sparx5 IS2 VCAP uses a dedicated counter area with 32bit counters. This series adds support for getting VCAP rule counters and provide these via the TC statistic interface. This only support packet counters, not byte counters. Finally the series adds support for the ARP frame dissector and configures the Sparx5 IS2 VCAP to generate the ARP keyset when ARP traffic is received. Delivery: ========= This is current plan for delivering the full VCAP feature set of Sparx5: - DebugFS support for inspecting rules - TC protocol all support - Sparx5 IS0 VCAP support - TC policer and drop action support (depends on the Sparx5 QoS support upstreamed separately) - Sparx5 ES0 VCAP support - TC flower template support - TC matchall filter support for mirroring and policing ports - TC flower filter mirror action support - Sparx5 ES2 VCAP support ==================== Signed-off-by:
-
Steen Hegelund authored
This tests the insert, move and deleting of rules and checks that the unused VCAP addresses are initialized correctly. Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by:
-
Steen Hegelund authored
This provides flower filter packet statistics (bytes are not supported) via the dedicated IS2 counter feature. All rules having the same TC cookie will contribute to the packet statistics for the filter as they are considered to be part of the same TC flower filter. Signed-off-by:
-
Steen Hegelund authored
This adds API methods to set and get a rule counter. A VCAP instance may contain the counter as part of the VCAP cache area, and this counter may be one or more bits in width. This type of counter automatically increments it value when the rule is hit. Other VCAP instances have a dedicated counter area outside of the VCAP and in this case the rule must contain the counter id to be able to locate the counter value. In this case there must also be a rule action that updates the counter using the rule id when the rule is hit. The Sparx5 IS2 VCAP uses a dedicated counter area. Signed-off-by:
-
Steen Hegelund authored
This adds a sorting criteria to rule insertion and deletion. The criteria is (in the listed order): - Rule size (largest size first) - User (based on an enumerated user value) - Priority (highest priority first, aka lowest value) When a rule is deleted the other rules may need to be moved to fill the gap to use the available VCAP address space in the best possible way. Signed-off-by:
-
Steen Hegelund authored
This add support for Sparx5 for dissecting TC ARP flower filter keys and sets up the Sparx5 IS2 VCAP to generate the ARP keyset for ARP frames. Signed-off-by:
-
Steen Hegelund authored
This adds a new flow_rule_match_arp function that allows drivers to be able to dissect ARP frames. Signed-off-by:
-
xu xin authored
The value of 'st->state' has been verified as "TCP_SEQ_STATE_LISTENING", it's unnecessary to assign TCP_SEQ_STATE_LISTENING to it, so we can remove it. Signed-off-by:
xu xin <xu.xin16@zte.com.cn> Signed-off-by:
-
David S. Miller authored
Nick Child says: ==================== ibmvnic: Introduce affinity hint support This is a patchset to do 3 things to improve ibmvnic performance: 1. Assign affinity hints to ibmvnic queue irq's 2. Update affinity hints on cpu hotplug events 3. Introduce transmit packet steering (XPS) NOTE: If irqbalance is running, you need to stop it from overriding our affinity hints. To do this you can do one of: - systemctl stop irqbalance - ban the ibmvnic module irqs - you must have the latest irqbalance v9.2, the banmod argument was broken before this - in /etc/sysconfig/irqbalance -> IRQBALANCE_ARGS="--banmod=ibmvnic" - systemctl restart irqbalance ==================== Signed-off-by: -
Nick Child authored
Transmit Packet Steering (XPS) maps cpu numbers to transmit queues. By running the same connection on the same set of cpu's, contention for the queue and cache miss rate can be minimized. When assigning a cpu mask for a tranmit queues irq number, assign the same cpu mask as the set of cpu's that XPS should use for that queue. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Reviewed-by:
Rick Lindsley <ricklind@linux.ibm.com> Reviewed-by:
Haren Myneni <haren@linux.ibm.com> Signed-off-by:
-
Nick Child authored
When CPU's are added and removed, ibmvnic devices will reassign hint values. Introduce a new cpu hotplug state CPUHP_IBMVNIC_DEAD to signal to ibmvnic devices that the CPU has been removed and it is time to reset affinity hint assignments. On the other hand, when CPU's are being added, add a state instance to CPUHP_AP_ONLINE_DYN which will trigger a reassignment of affinity hints once the new CPU's are online. This implementation is based on the virtio_net driver. Signed-off-by:
-
Nick Child authored
Assign affinity hints to ibmvnic device queue interrupts. Affinity hints are assigned and removed during sub-crq init and teardown, respectively. This update should improve latency if utilized as interrupt lines and processing are more equally distributed among CPU's. This implementation is based on the virtio_net driver. Signed-off-by:
-
Md Fahad Iqbal Polash authored
Add support for 2 virtchnl msgs: VIRTCHNL_OP_SET_RSS_HENA VIRTCHNL_OP_GET_RSS_HENA_CAPS The first one allows VFs to clear all previously programmed RSS configuration and customize it. The second one returns the RSS HENA bits allowed by the hardware. Introduce ice_err_to_virt_err which converts kernel specific errors to virtchnl errors. Signed-off-by:
Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
-
Chuang Wang authored
The error handling in tun_get_user is very scattered. This patch unifies error handling, reduces duplication of code, and makes the logic clearer. Signed-off-by:
Chuang Wang <nashuiliang@gmail.com> Signed-off-by:
-
- 12 Nov, 2022 14 commits
-
-
Saeed Mahameed authored
Implement ethtool_op get_link_ext_stats for PHY down events Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Gal Pressman <gal@nvidia.com>
-
Oz Shlomo authored
The pre_ct table realizes in hardware the act_ct cache logic, bypassing the CT table if the ct state was already set by a previous ct lookup. As such, the pre_ct table will always miss for chain 0 filters. Optimize the pre_ct table lookup for rules installed on chain 0. Signed-off-by:
Oz Shlomo <ozsh@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Tariq Toukan authored
A single async context object is sufficient to wait for the completions of many callbacks. Switch to using one instance per a bulk of commands. Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
-
Tariq Toukan authored
Waiting on a completion object for each callback before cleaning up their async contexts is not necessary, as this is already implied in the mlx5_cmd_cleanup_async_ctx() API. Signed-off-by:
-
Tariq Toukan authored
Work field in struct mlx5e_async_ctx is not used. Remove it. Signed-off-by:
-
Roi Dayan authored
The case where the packet is not offloaded and needs to be restored to slow path and couldn't find expected tunnel information should not dump a call trace to the user. there is a debug call. Signed-off-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
-
Guy Truzman authored
Up until now, return value of update_rx was ignored. Therefore, flow continues even if it fails. Add error flow in case of update_rx fails in mlx5e_open_locked, mlx5i_open and mlx5i_pkey_open. Signed-off-by:
Guy Truzman <gtruzman@nvidia.com> Reviewed-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
-
Tariq Toukan authored
Params info print was meant to be printed on load. With time, new calls to mlx5e_init_rq_type_params and mlx5e_build_rq_params were added, mistakenly printing the params once again. Move the print to were it belongs, in mlx5e_probe. Signed-off-by:
-
Ofer Levi authored
CQE compression feature improves performance by reducing PCI bandwidth bottleneck on CQEs write. Enhanced CQE compression introduced in ConnectX-6 and it aims to reduce CPU utilization of SW side packets decompression by eliminating the need to rewrite ownership bit, which is likely to cost a cache-miss, is replaced by validity byte handled solely by HW. Another advantage of the enhanced feature is that session packets are available to SW as soon as a single CQE slot is filled, instead of waiting for session to close, this improves packet latency from NIC to host. Performance: Following are tested scenarios and reults comparing basic and enahnced CQE compression. setup: IXIA 100GbE connected directly to port 0 and port 1 of ConnectX-6 Dx 100GbE dual port. Case #1 RX only, single flow goes to single queue: IRQ rate reduced by ~ 30%, CPU utilization improved by 2%. Case #2 IP forwarding from port 1 to port 0 single flow goes to single queue: Avg latency improved from 60us to 21us, frame loss improved from 0.5% to 0.0%. Case #3 IP forwarding from port 1 to port 0 Max Throughput IXIA sends 100%, 8192 UDP flows, goes to 24 queues: Enhanced is equal or slightly better than basic. Testing the basic compression feature with this patch shows there is no perfrormance degradation of the basic compression feature. Signed-off-by:
Ofer Levi <oferle@nvidia.com> Reviewed-by:
-
Gal Pressman authored
Replace the min/max operations with a single clamp. Signed-off-by:
-
Anisse Astier authored
This is never used, and probably something that was intended to be used before per-protocol hash tables were chosen instead. Signed-off-by:
Anisse Astier <anisse@astier.eu> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Eli Cohen authored
hca_id is an identifier of an mlx5_core instance within the hardware. This identifier may be required for troubleshooting. Expose it to debugfs. Example: $ cat /sys/kernel/debug/mlx5/mlx5_core.sf.2/vhca_id 0x12 Signed-off-by:
Eli Cohen <elic@nvidia.com> Reviewed-by:
-
Moshe Shemesh authored
Before this patch, devlink traps are registered only on full driver probe and unregistered on driver removal. As devlink traps are not usable once driver functionality is unloaded, it should be unrgeistered also on flows that unload the driver and then registered when loaded back, e.g. devlink reload flow. Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in an error message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
