- 24 Jan, 2016 30 commits
-
-
James Hogan authored
The module init and exit functions have no need to be global, so make them static. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11889/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
When calculating the offsets into the commpage for dynamically translated mtc0/mfc0 guest instructions, multiple offsetof()s are added together to find the offset of the specific register in the mips_coproc, within the commpage. Simplify each of these cases to a single offsetof() to find the offset of the specific register within the commpage. Signed-off-by:
-
James Hogan authored
Export symbols only to GPL modules to match other KVM symbols in virt/kvm/ and arch/*/kvm/. Signed-off-by:
-
James Hogan authored
The function kvm_mips_host_tlb_inv_index() is unused, so drop it completely. Signed-off-by:
-
James Hogan authored
The CAUSEB_DC and CAUSEF_DC definitions used by KVM are defined in asm/kvm_host.h, but all the other Cause register field definitions are found in asm/mipsregs.h. Lets reunite the DC bit definitions with its friends in mipsregs.h. Signed-off-by:
-
James Hogan authored
Some definitions in the MIPS asm/kvm_host.h are completely unused, so lets drop them. MS_TO_NS is no longer used since commit e30492bb ("MIPS: KVM: Rewrite count/compare timer emulation"). The others don't appear ever to have been used. Signed-off-by:
-
James Hogan authored
A bunch of misc whitespace and style fixes within arch/mips/kvm/. Signed-off-by:
-
Joshua Henderson authored
This adds an initial default config that enables all available PIC32 drivers and is enough for booting a PIC32MZDA Starter Kit. Signed-off-by:
Joshua Henderson <joshua.henderson@microchip.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12105/Signed-off-by:
-
Joshua Henderson authored
This adds basic DTS configuration for the PIC32MZDA chip and in turn the PIC32MZDA Starter Kit. Signed-off-by:
-
Joshua Henderson authored
This adds support for the Microchip PIC32 MIPS microcontroller with the specific variant PIC32MZDA. PIC32MZDA is based on the MIPS m14KEc core and boots using device tree. This includes an early pin setup and early clock setup needed prior to device tree being initialized. In additon, an interface is provided to synchronize access to registers shared across several peripherals. Signed-off-by:
-
Joshua Henderson authored
This adds support for the Microchip PIC32 platform along with the specific variant PIC32MZDA on a PIC32MZDA Starter Kit. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12096/Signed-off-by:
-
Cristian Birsan authored
This adds support for the interrupt controller present on PIC32 class devices. It handles all internal and external interrupts. This controller exists outside of the CPU core and is the arbitrator of all interrupts (including interrupts from the CPU itself) before they are presented to the CPU. The following features are supported: - DT properties for EVIC and for devices/peripherals that use interrupt lines - Persistent and non-persistent interrupt handling - irqdomain and generic chip support - Configuration of external interrupt edge polarity Signed-off-by:
Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12092/Signed-off-by:
-
Cristian Birsan authored
Document the devicetree bindings for the interrupt controller on Microchip PIC32 class devices. Signed-off-by:
-
Álvaro Fernández Rojas authored
Add brcm,bcm6358-leds node to bcm6368.dtsi Add reboot support (syscon-reboot as defined in BCM6328) Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/12117/Signed-off-by:
-
Álvaro Fernández Rojas authored
Adds bcm6328-leds node to bcm6328.dtsi Signed-off-by:
-
James Hogan authored
The cp0_tcstatus member of struct pt_regs was removed along with the rest of SMTC in v3.16, commit b633648c ("MIPS: MT: Remove SMTC support"), however recent uprobes support in v4.3 added back a reference to it in the regoffset_table[] in ptrace.c. Remove it. Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11925/Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by:
-
Maciej W. Rozycki authored
Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12178/Signed-off-by:
-
Maciej W. Rozycki authored
Fix the description of the microMIPS NOP16 encoding or MM_NOP16, which is not equivalent to the MIPS16 NOP instruction. This is 0x0c00 and represents the microMIPS `MOVE16 $0, $0' operation, whereas MIPS16 NOP is encoded as 0x6500, representing `MOVE $0, $16'. Also fix a typo in `mm_fp0_format' description. Signed-off-by:
-
Maciej W. Rozycki authored
Remove irrelevant content from the description of the emulation frame in `mips_dsemul', referring to bare-metal configurations. Update the text, reflecting the change made with commit ba3049ed ("MIPS: Switch FPU emulator trap to BREAK instruction."), where we switched from using an address error exception on an unaligned access to the use of a BREAK 514 instruction causing a breakpoint exception instead. Signed-off-by:
-
Maciej W. Rozycki authored
Emulate the microMIPS ADDIUPC instruction directly in `mips_dsemul'. If executed in the emulation frame, this instruction produces an incorrect result, because the value of the PC there is not the same as where the instruction originated. Reshape code so as to handle all microMIPS cases together. Signed-off-by:
-
Maciej W. Rozycki authored
Complement commit 102cedc3 ("MIPS: microMIPS: Floating point support.") which introduced microMIPS FPU emulation, but did not adjust the encoding of the BREAK instruction used to terminate the branch delay slot emulation frame. Consequently the execution of any such frame is indeterminate and, depending on CPU configuration, will result in random code execution or an offending program being terminated with SIGILL. This is because the regular MIPS BREAK instruction is encoded with the 0 major and the 0xd minor opcode, however in the microMIPS instruction set this major/minor opcode pair denotes an encoding reserved for the DSP ASE. Instead the microMIPS BREAK instruction is encoded with the 0 major and the 0x7 minor opcode. Use the correct BREAK encoding for microMIPS FPU emulation then. Signed-off-by:
-
Maciej W. Rozycki authored
Correct formatting breakage introduced with commit 102cedc3 ("MIPS: microMIPS: Floating point support."), so that further changes to this code can be consistent. Signed-off-by:
-
Maciej W. Rozycki authored
Fix an issue introduced with commit 9ab4471c ("MIPS: math-emu: Correct delay-slot exception propagation") where the emulation of a NOP instruction signals the need to terminate the emulation loop. This in turn, if the PC has not changed from the entry to the loop, will cause the kernel to terminate the program with SIGILL. Consider this program: static double div(double d) { do d /= 2.0; while (d > .5); return d; } int main(int argc, char **argv) { return div(argc); } which gets compiled to the following binary code: 00400490 <main>: 400490: 44840000 mtc1 a0,$f0 400494: 3c020040 lui v0,0x40 400498: d44207f8 ldc1 $f2,2040(v0) 40049c: 46800021 cvt.d.w $f0,$f0 4004a0: 46220002 mul.d $f0,$f0,$f2 4004a4: 4620103c c.lt.d $f2,$f0 4004a8: 4501fffd bc1t 4004a0 <main+0x10> 4004ac: 00000000 nop 4004b0: 4620000d trunc.w.d $f0,$f0 4004b4: 03e00008 jr ra 4004b8: 44020000 mfc1 v0,$f0 4004bc: 00000000 nop Where the FPU emulator is used, depending on the number of command-line arguments this code will either run to completion or terminate with SIGILL. If no arguments are specified, then BC1T will not be taken, NOP will not be emulated and code will complete successfully. If one argument is specified, then BC1T will be taken once and NOP will be emulated. At this point the entry PC value will be 0x400498 and the new PC value, set by `mips_dsemul' will be 0x4004a0, the target of BC1T. The emulation loop will terminate, but SIGILL will not be issued, because the PC has changed. The FPU emulator will be entered again and on the second execution BC1T will not be taken, NOP will not be emulated and code will complete successfully. If two or more arguments are specified, then the first execution of BC1T will proceed as above. Upon reentering the FPU emulator the emulation loop will continue to BC1T, at which point the branch will be taken and NOP emulated again. At this point however the entry PC value will be 0x4004a0, the same as the target of BC1T. This will make the emulator conclude that execution has not advanced and therefore an unsupported FPU instruction has been encountered, and SIGILL will be sent to the process. Fix the problem by extending the internal API of `mips_dsemul', making it return -1 if no delay slot emulation frame has been made, the instruction has been handled and execution of the emulation loop needs to continue as if nothing happened. Remove code from `mips_dsemul' to reproduce steps made by the emulation loop at the conclusion of each iteration, as those will be reached normally now. Adjust call sites accordingly. Document the API. Signed-off-by:
-
Huacai Chen authored
Commit be0c37c9 (MIPS: Rearrange PTE bits into fixed positions.) defines fixed PTE bits for MIPS R2. Then, commit d7b63141 (MIPS: pgtable-bits: Fix XPA damage to R6 definitions.) adds the MIPS R6 definitions in the same way as MIPS R2. But some R6 #ifdefs in the later commit are missing, so in this patch I fix that. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12164/Signed-off-by:
-
Huacai Chen authored
While synchronization, count register will go backwards for the master. If synchronise_count_master() runs before synchronise_count_slave(), skew becomes even more. The skew is very harmful for CPU hotplug (CPU0 do synchronization with CPU1, then CPU0 do synchronization with CPU2 and CPU0's count goes backwards, so it will be out of sync with CPU1). After the commit cf9bfe55 (MIPS: Synchronize MIPS count one CPU at a time), we needn't evaluate count_reference at the beginning of synchronise_count_master() any more. Thus, we evaluate the initcount (It seems like count_reference is redundant) in the 2nd loop. Since we write the count register in the last loop, we don't need additional barriers (the existing memory barriers are enough). Moreover, I think we loop 3 times is enough to get a primed instruction cache, this can also get less skew than looping 5 times. Comments are also updated in this patch. Signed-off-by:
-
- 22 Jan, 2016 4 commits
-
-
Huacai Chen authored
This patch is borrowed from x86 hpet driver and explaind below: Due to the overly intelligent design of HPETs, we need to workaround the problem that the compare value which we write is already behind the actual counter value at the point where the value hits the real compare register. This happens for two reasons: 1) We read out the counter, add the delta and write the result to the compare register. When a NMI hits between the read out and the write then the counter can be ahead of the event already. 2) The write to the compare register is delayed by up to two HPET cycles in AMD chipsets. We can work around this by reading back the compare register to make sure that the written value has hit the hardware. But that is bad performance wise for the normal case where the event is far enough in the future. As we already know that the write can be delayed by up to two cycles we can avoid the read back of the compare register completely if we make the decision whether the delta has elapsed already or not based on the following calculation: cmp = event - actual_count; If cmp is less than 64 HPET clock cycles, then we decide that the event has happened already and return -ETIME. That covers the above #1 and #2 problems which would cause a wait for HPET wraparound (~306 seconds). Signed-off-by:
-
Huacai Chen authored
When Core-0 handle SMP_ASK_C0COUNT IPI, we should make other cores to see the result as soon as possible (especially when Store-Fill-Buffer is enabled). Otherwise, C0_Count syncronization makes no sense. BTW, array is more suitable than per-cpu variable for syncronization, and there is a corner case should be avoid: C0_Count of Core-0 can be really 0. Signed-off-by:
-
Huacai Chen authored
If GCC >= 4.9 and Binutils >=2.25, we use -march=loongson3a, otherwise we use -march=mips64r2, this can slightly improve performance. Besides, arch/mips/loongson64/Platform is a better location rather than arch/ mips/Makefile. Signed-off-by:
-
Huacai Chen authored
In history, __arch_local_irq_restore() is only used by SMTC. However, SMTC support has been removed since 3.16, this patch remove the unused function. Signed-off-by:
-
- 19 Jan, 2016 6 commits
-
-
Maciej W. Rozycki authored
Add an `ieee754=' kernel parameter to control IEEE Std 754 conformance mode. Use separate flags copied from the respective CPU feature flags, and adjusted according to the conformance mode selected, to make binaries requesting individual NaN encoding modes accepted or rejected as needed. Update the initial setting for FCSR and, in the full FPU emulation mode, its read-only mask accordingly. Accept the mode selection requested for legacy processors as well. As with the EF_MIPS_NAN2008 ELF file header flag adjust both ABS2008 and NAN2008 bits at the same time, to match the choice made for hardware currently implemented. Signed-off-by:
-
Maciej W. Rozycki authored
Determine the presence of and the amount of control available over IEEE Std 754-2008 features. In the case of a hardware FPU being used examine the FIR register for the presence of the HAS2008 bit and then the FCSR register for the writability of the ABS2008 and NAN2008 bits and the hardwired state of each of these bits if read-only. Update the initial FCSR contents used for threads and the FCSR writability mask accordingly. For full FPU emulation and MIPS32 or MIPS64 processors make the FCSR ABS2008 and NAN2008 bits writable. Signed-off-by:
-
Maciej W. Rozycki authored
Handle the EF_MIPS_NAN2008 ELF file header flag and refuse execution where there is no support in the FPU for the NaN encoding mode requested by a binary invoked. Ensure that the setting of the bit in the binary matches one in any intepreter used. Set the thread's initial FCSR contents according to the value of the EF_MIPS_NAN2008. Set the values of the FCSR ABS2008 and NAN2008 bits both to the same value if possible, to take the approach taken with existing FPU hardware into account. As of now all implementations have both bits hardwired to the same value, that is both are fixed at 0 or both are fixed at 1, even though the architecture allows for implementations where the amount of control implemented with each of these two individual bits is independent of each other. Signed-off-by:
-
Maciej W. Rozycki authored
Also pass any interpreter's file header to `arch_check_elf' so that any architecture handler can have a look at it if needed. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11478/Signed-off-by:
-
Maciej W. Rozycki authored
Implement IEEE Std 754-2008 NaN encoding wired to the state of the FCSR.NAN2008 bit. Make the interpretation of the quiet bit in NaN data as follows: * in the legacy mode originally defined by the MIPS architecture the value of 1 denotes an sNaN whereas the value of 0 denotes a qNaN, * in the 2008 mode introduced with revision 5 of the MIPS architecture the value of 0 denotes an sNaN whereas the value of 1 denotes a qNaN, following the definition of the preferred NaN encoding introduced with IEEE Std 754-2008. In the 2008 mode, following the requirement of the said standard, quiet an sNaN where needed by setting the quiet bit to 1 and leaving all the NaN payload bits unchanged. Update format conversion operations according to the rules set by IEEE Std 754-2008 and the MIPS architecture. Specifically: * propagate NaN payload bits through conversions between floating-point formats such that as much information as possible is preserved and specifically a conversion from a narrower format to a wider format and then back to the original format does not change a qNaN payload in any way, * conversions from a floating-point to an integer format where the source is a NaN, infinity or a value that would convert to an integer outside the range of the result format produce, under the default exception handling, the respective values defined by the MIPS architecture. In full FPU emulation set the FIR.HAS2008 bit to 1, however do not make any further FCSR bits writable. Signed-off-by:
-
Maciej W. Rozycki authored
Implement IEEE Std 754-2008 non-arithmetic ABS.fmt and NEG.fmt emulation wired to the state of the FCSR.ABS2008 bit. In the non-arithmetic mode the sign bit is altered according to the operation requested regardless of the datum encoded in the input operand, no other bits are changed, the resulting bit pattern is written to the output operand and no exception is ever signalled. Signed-off-by:
-
