- 07 Apr, 2009 3 commits
-
-
Rusty Russell authored
This reverts commit 9cb610d8. This was an impressively stupid patch. Firstly, we reset the SHF_ALLOC flag lower down in the same function, so the patch was useless. Even better, find_sec() ignores sections with SHF_ALLOC not set, so it breaks CONFIG_MODVERSIONS=y with CONFIG_MODULE_FORCE_LOAD=n, which refuses to load the module since it can't find the __versions section. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Trond Myklebust authored
Due to an apparent typo, commit a67d18f8 (NFS: load the rpc/rdma transport module automatically) lead to the 'proto=' mount option doing a double free, while Opt_mountproto leaks a string. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This makes the defautl ext3 data ordering mode (when no explicit ordering is set) configurable, so as to allow people to default to 'data=writeback' and get the resulting latency improvements. This is a non-issue if a filesystem has been explicitly set to some ordering (with 'tune2fs'). Signed-off-by:
-
- 06 Apr, 2009 37 commits
-
-
git://git.infradead.org/ubifs-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix recovery bug UBIFS: add R/O compatibility UBIFS: fix compiler warnings UBIFS: fully sort GCed nodes UBIFS: fix commentaries UBIFS: introduce a helpful variable UBIFS: use KERN_CONT UBIFS: fix lprops committing bug UBIFS: fix bogus assertion UBIFS: fix bug where page is marked uptodate when out of space UBIFS: amend key_hash return value UBIFS: improve find function interface UBIFS: list usage cleanup UBIFS: fix dbg_chk_lpt_sz()
-
git://git.infradead.org/ubi-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: add fsync capability
-
Oleg Nesterov authored
The CAP_KILL check in exit_notify() looks just wrong, kill it. Whatever logic we have to reset ->exit_signal, the malicious user can bypass it if it execs the setuid application before exiting. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
-
Alan Cox authored
As noted by Janne Grunau it would be good if the date was also right. (Web site also resynched) Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Alexander Beregalov authored
Fix this build error: drivers/md/raid1.c: In function 'raid1_congested': drivers/md/raid1.c:589: error: 'BDI_write_congested' undeclared BDI_write_congested was changed in commit 1faa16d2 ("block: change the request allocation/congestion logic to be sync/async based") Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Alan Cox authored
The 8430 patch was short a const so caused a warning. Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alan Cox authored
There are various bits of code here that are unfinished and instead of being harmless either confuse or spew stuff into the logs at higher than debug level. They can and should go away. Also remove the bogus use of tty->lowlatency. We fixed the need for this hack long ago (with the flip buffer rewrite) but people keep copying it into drivers. Signed-off-by:
-
Alan Cox authored
Closes bug 9065 Signed-off-by:
-
Alan Cox authored
Bugzilla #9095 and a couple of other confirmations Signed-off-by:
-
Breno Leitao authored
Signed-off-by:
Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by:
-
Alexander Beregalov authored
Fixes: In file included from drivers/serial/mux.c:37: include/linux/serial_core.h: In function 'uart_handle_sysrq_char': include/linux/serial_core.h:467: error: 'struct uart_port' has no member named 'sysrq' include/linux/serial_core.h:468: error: 'struct uart_port' has no member named 'sysrq' Signed-off-by:
-
Breno Leitao authored
As it was, the retval was never returned, so its assignments were silly. Just consolidate everything to rc, and remove the unused retval variable. Signed-off-by:
Alan Cox <alan@etchedpixels.co.uk> Signed-off-by:
-
Breno Leitao authored
Signed-off-by:
-
Jiri Slaby authored
mxser_check_modem_status is called with tty parameter, so the reference should be increased by callers already -- for ioctl syscall it is held whole time gap since open to close, for interrupt, the reference count is increased in the irq handler. There is no tty_kref_put in that function, so this also fixes a refcounting bug. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Jiri Slaby authored
There is missing tty_kref_put on some paths in moxa_poll_port, although the reference is always taken. Fix it. Signed-off-by:
Jan 'Yenya' Kasprzak <kas@fi.muni.cz> Signed-off-by:
-
Alan Cox authored
The isicom driver leaks a kref on the shutdown path. Drop the additional kref we took Signed-off-by:
-
Alan Cox authored
Found by Daniel Marjamäki using cppcheck Signed-off-by:
-
Scott James Remnant authored
The riscom8 module is missing the char-major-48-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
Scott James Remnant <scott@canonical.com> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Scott James Remnant authored
The cdc_acm module is missing the char-major-166-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
-
Scott James Remnant authored
The specialix module is missing the char-major-75-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
-
Scott James Remnant authored
The cyclades module is missing the char-major-19-* alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
-
Scott James Remnant authored
The applicom module is missing the char-major-10-157 alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by:
-
Graf Yang authored
Fix bug - up arrow key works abnormal for bf561 ezkit board Signed-off-by:
Graf Yang <graf.yang@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Sonic Zhang authored
Reported-by:
Qian Zhang <zhangq@sansitech.com> Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Sonic Zhang authored
Fixes this compile issue: drivers/serial/bfin_5xx.c: In function bfin_serial_rx_chars: drivers/serial/bfin_5xx.c:178: error: struct uart_info has no member named tty Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
-
Michael Hennerich authored
Enable third UART on BF538/9 Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Will Page authored
Signed-off-by:
Will Page <will.page@ni.com> Signed-off-by:
Shawn Bohrer <shawn.bohrer@ni.com> Signed-off-by:
-
Shawn Bohrer authored
This implements basic support for all 843x RS232 devices, but does not add DMA support. This means that sustained data transfers at high baud rates may not be possible on multiple ports simultaneously. Signed-off-by:
-
Matthew Garrett authored
Add new Wacom device IDs to the 8250_pnp serial driver, to support autoconfig on some newer tablet PCs. Also add a comment to clarify that the FUJ02E6 device is a custom protocol, not a Wacom tablet. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Danny Kukawka authored
Add another serial Wacom tablet with pnp_id: WACF009. Signed-off-by:
Danny Kukawka <dkukawka@suse.de> Signed-off-by:
-
David Howells authored
Make CONFIG_SLOW_WORK an automatic rather than manual config option so that people configuring their kernels don't have to make the choice. It can be selected automatically by those things that require it (such as FS-Cache). Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Jeff Garzik <jgarzik@redhat.com> Acked-by:
Kyle McMartin <kyle@mcmartin.ca> Signed-off-by:
-
Adrian Bunk authored
This patch fixes the follwing build error caused by commit 7ca43e75 (mm: use debug_kmap_atomic): ... AS arch/frv/mm/tlb-miss.o In file included from arch/frv/mm/tlb-miss.S:13: ... Assembler messages: include/asm-generic/ioctl.h:73: Error: unrecognized instruction `extern unsigned int __invalid_size_argument_for_IO...' ... Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
git://git.infradead.org/iommu-2.6Linus Torvalds authored
* git://git.infradead.org/iommu-2.6: drivers/pci/intr_remapping.c: include acpi.h intel-iommu: Fix oops in device_to_iommu() when devices not found. intel-iommu: Handle PCI domains appropriately. intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges. x2apic/intr-remap: decouple interrupt remapping from x2apic x86, dmar: check if it's initialized before disable queue invalidation intel-iommu: set compatibility format interrupt Intel IOMMU Suspend/Resume Support - Interrupt Remapping Intel IOMMU Suspend/Resume Support - Queued Invalidation Intel IOMMU Suspend/Resume Support - DMAR intel-iommu: Add for_each_iommu() and for_each_active_iommu() macros
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md/raid1 - don't assume newly allocated bvecs are initialised.
-
