- 14 Dec, 2016 1 commit
-
-
Bartosz Golaszewski authored
THS8135 is a configurable video DAC. Add DT bindings for this chip. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1481623759-12786-3-git-send-email-bgolaszewski@baylibre.com
-
- 13 Dec, 2016 33 commits
-
-
Daniel Vetter authored
fsl is already fully demidlayered in the probe function, but for convenience stuck with drm_put_dev. Call the unregister/unref parts separately, to make sure this driver works correct. v2: Rebase. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213175449.24525-1-daniel.vetter@ffwll.ch
-
Dan Carpenter authored
We should be checking for IS_ERR() instead of NULL because drm_dev_alloc() returns error pointers. Fixes: 45d59d70 ("drm: Add new driver for MXSFB controller") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161213122332.GA7519@elgon.mountain
-
git://people.freedesktop.org/~airlied/linuxDaniel Vetter authored
Main pull request for drm for 4.10 kernel - resync drm-misc with full 4.10 state (2 new drivers) so that we can start pulling in all the refactorings for 4.11! Signed-off-by: -
Daniel Stone authored
If atomic state is available, use this to read the current plane in GetCrtc/GetPlane, rather than the legacy points. Signed-off-by:
Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Kristian H. Kristensen authored
We need to define DRM_FORMAT_MOD_VENDOR_NONE for the fourcc_mod_code() macro to work correctly. Signed-off-by:
Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by:
-
Daniel Vetter authored
drm_put_dev is the old midlayer-broken device cleanup function, but etnaviv has a proper unbind function which first unregisters and then drops the final reference. No functional change since drm_dev_unregister happens to be idempotent. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by:
-
Daniel Vetter authored
fsl is already fully demidlayered in the probe function, but for convenience stuck with drm_put_dev. Call the unregister/unref parts separately, to make sure this driver works correct. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Reviewed-by:
-
Daniel Vetter authored
- Put all the remaing bits of the old doc into suitable places in the new sphinx world. - Also document the poll support, we forgot to do that. - Delete dma-buf-sharing.txt. v2: Don't forget to update MAINTAINERS. Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161209215055.3492-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
- Again move the information relevant for driver writers next to the callbacks. - Put the overview and userspace interface documentation into a DOC: section within the code. - Remove the text that mmap needs to be coherent - since the DMA_BUF_IOCTL_SYNC landed that's no longer the case. But keep the text that for pte zapping exporters need to adjust the address space. - Add a FIXME that kmap and the new begin/end stuff used by the SYNC ioctl don't really mix correctly. That's something I just realized while doing this doc rework. - Augment function and structure docs like usual. Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Daniel Vetter authored
- Put the initial overview for dma-buf into dma-buf.rst. - Put all the comments about detailed semantics into the right kernel-doc comment for functions or ops structure member. - To allow that detail, switch the reworked kerneldoc to inline style for dma_buf_ops. - Tie everything together into a much more streamlined overview comment, relying on the hyperlinks for all the details. - Also sprinkle some links into the kerneldoc for dma_buf and dma_buf_attachment to tie it all together. Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Daniel Vetter authored
This was missed when adding a dma_fence_get call. While at it also remove the kerneldoc for the static inline helper - no point documenting internals down to every detail. Fixes: 30cd85dd ("dma-buf/sync_file: hold reference to fence when creating sync_file") Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Sean Paul <seanpaul@chromium.org> Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
git://git.lwn.net/linuxDaniel Vetter authored
Backmerge the docs-next branch from Jon into drm-misc so that we can apply the dma-buf documentation cleanup patches. Git found a conflict where there was none because both drm-misc and docs had identical patches to clean up file rename issues in the rst include directives. Signed-off-by: -
Daniel Vetter authored
It's deprecated and only should be used by drivers which still use drm_platform_init, not by anyone else. And indeed it's entirely unused and can be nuked. This required a bit more fudging, but I guess kirin_dc_ops really wants to operate on the platform_device, not something else. Also bonus points for implementing abstraction, and then storing the vfunc in a global variable. v2: Don't break the build soooo badly :( Note that the cleanup function is a bit confused: ade_data was never set as drvdata, and calling drm_crtc_cleanup directly is a bug - this is called indirectly through drm_mode_config_cleanup, which calls into crtc->destroy, which already has the call to drm_crtc_cleanup. Which means we can just nuke it. Note this is the 2nd attempt after the first one failed and had to be reverted again in commit 9cd2e854 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Aug 17 13:59:40 2016 +0200 Revert "drm/hisilicon: Don't set drm_device->platformdev" Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Daniel Vetter authored
With the last round of changes all ioctls called by modern drivers now have their own locking. Everything else is only allowed for legacy drivers and hence the lack of locking doesn't matter. One exception is nouveau, due to the DRIVER_KMS_LEGACY_CONTEXT flag. But that only works its magic on the context and bufs ioctls. And drm_bufs.c is protected with dev->struct_mutex, and drm_context.c by the same and dev->ctxlist_mutex. That should be all safe, and we can finally mandata drm-bkl-less ioctls for everyone! Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniel Vetter authored
It only updates per-file feature flags. And all the ioctl which change behaviour depending upon these flags (they're all kms features) do _not_ hold the BKL. Therefor this is pure cargo-cult and can be removed. Note that there's a risk that the ioctl will behave inconsistently when userspace is racing with itself, but that's ok. The only thing it's not allowed to do is oops the kernel, and from an audit all places are safe. v2: Clarify that the inconsistency is only when userspace races (Chris). Reviewed-by:
-
Daniel Vetter authored
No one looks at the major/minor versions except the unique/busid stuff. If we protect that with the master_mutex (since it also affects the unique of each master, oh well) we can mark these two IOCTL with DRM_UNLOCKED. While doing this I realized that the comment for the magic_map is outdated, I've forgotten to update it in: commit d2b34ee6 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jun 17 09:33:21 2016 +0200 drm: Protect authmagic with master_mutex Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Daniel Vetter authored
Not setting the fb modifiers flag is something different from setting the fb modifiers to 0 (which means explicitly linear). We kinda failed to document that properly. Spotted by Kristian. Cc: hoegsberg@google.com Reviewed-by:
-
git://github.com/skeggsb/linuxDave Airlie authored
- Regression fix from atomic conversion (rotation on the original G80). - Concurrency fix when clearing compression tags. - Fixes DP link training issues on GP102/4/6. - Fixes backlight handling in the presence of Apple GMUX. - Improvements to GPU error recovery in a number of scenarios. - GP106 support. * 'linux-4.10' of git://github.com/skeggsb/linux: drm/nouveau/kms/nv50: fix atomic regression on original G80 drm/nouveau/bl: Do not register interface if Apple GMUX detected drm/nouveau/bl: Assign different names to interfaces drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2 drm/nouveau/ltc: protect clearing of comptags with mutex drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap drm/nouveau/core: recognise GP106 chipset drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode drm/nouveau/gr/gf100-: properly ack all FECS error interrupts drm/nouveau/fifo/gf100-: recover from host mmu faults
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v4.10-rc1 This has a couple of fixes for IOMMU support and some fixes for error handling. * tag 'drm/tegra/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Set sgt pointer in BO pin drm/tegra: Support kernel mappings with IOMMU gpu: host1x: Add locking to syncpt gpu: host1x: Store device address to all bufs drm/tegra: gem: Remove some dead code drm/tegra: sor: No need to free devm_ allocated memory drm/tegra: Fix error handling drm/tegra: dpaux: Fix error handling
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/panel: Changes for v4.10-rc1 This adds support for a couple more panels to the simple-panel driver. There is also a fix for a long-standing bug, but it's not critical since no code will currently trigger it. * tag 'drm/panel/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: simple: Add support for AUO G185HAN01 drm/panel: simple: Add support for AUO G133HAN01 drm/panel: simple: Add more properties to Innolux G121I1-L01 drm/panel: simple: Add bits-per-component for Sharp LQ123P1JX31 drm/panel: simple: Check against num_timings when setting preferred for timing drm/panel: Add support for Chunghwa CLAA070WP03XG panel drm/panel: simple: Add NVD9128 as a simple panel drm/panel: simple: Add support for AUO T215HVN01 drm/panel: simple: Add support for Sharp LQ150X1LG11 panels dt-bindings: display: Add Sharp LQ150X1LG11 panel binding
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2016-12-10' of git://anongit.freedesktop.org/git/drm-misc into drm-next single fix for backwards compat. * tag 'drm-misc-next-fixes-2016-12-10' of git://anongit.freedesktop.org/git/drm-misc: drm: Add fake controlD* symlinks for backwards compat
-
https://github.com/anholt/linuxDave Airlie authored
This pull request brings in VEC (TV-out) support for vc4, along with a pageflipping race fix. * tag 'drm-vc4-next-2016-12-09' of https://github.com/anholt/linux: drm/vc4: Don't use drm_put_dev drm/vc4: Document VEC DT binding drm/vc4: Add support for the VEC (Video Encoder) IP drm: Add TV connector states to drm_connector_state drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum drm/vc4: Fix ->clock_select setting for the VEC encoder drm/vc4: Fix race between page flip completion event and clean-up
-
Ben Skeggs authored
Reported-by:
Pierre Moreau <pierre.morrow@free.fr> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Pierre Moreau authored
The Apple GMUX is the one managing the backlight, so there is no need for Nouveau to register its own backlight interface. v2: Do not split information message on two lines as it prevents from grepping it, as pointed out by Lukas Wunner v3: Add a missing end-of-line character to the printed message Signed-off-by:Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Pierre Moreau authored
Currently, every backlight interface created by Nouveau uses the same name, nv_backlight. This leads to a sysfs warning as it tries to create an already existing folder. This patch adds a incremented number to the name, but keeps the initial name as nv_backlight, to avoid possibly breaking userspace; the second interface will be named nv_backlight1, and so on. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86539 v2: * Switch to using ida for generating unique IDs, as suggested by Ilia Mirkin; * Allocate backlight name on the stack, as suggested by Ilia Mirkin; * Move `nouveau_get_backlight_name()` to avoid forward declaration, as suggested by Ilia Mirkin; * Fix reference to bug report formatting, as reported by Nick Tenney. v3: * Define a macro for the size of the backlight name, to avoid defining it multiple times; * Use snprintf in place of sprintf. v4: * Do not create similarly named interfaces when reaching the maximum amount of unique names, but fail instead, as pointed out by Lukas Wunner Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
TTM was changed a while back to allow for pipelining of buffer moves, and part of this was the removal of waiting for a BO to idle before calling move(), placing the responsibility on the driver to do this if required. That's all well and good, except, we make use of move_notify() to handle mapping/unmapping from the GPU VMM as move() isn't called on all paths. This commit adds a wait before unmapping from a VMM in move_notify(), to prevent GPU page faults where a buffer is still being accessed. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
This has been on the TODO list for a while now, recovering from things such as attempting to execute a push buffer or touch a semaphore in an unmapped memory area. The only thing required on the HW side here is that the offending channel is removed from the runlist, and *not* a full reset of PFIFO. This used to be a bit messier to handle before the rework to make use of engine topology info, but is apparently now trivial. Signed-off-by:
-
- 12 Dec, 2016 2 commits
-
-
Daniel Vetter authored
Looping twice when we can do it once is silly. Also use a consistent style. Note that there's a good race with the connector list walking, since that is no longer protected by mode_config.mutex. But that's for a later patch to fix. v2: Actually try to not blow up, somehow I lost the hunk that checks we don't copy too much. Noticed by Chris. v3: - squash all drm_mode_getresources cleanups into one - use consistent style for walking objects (Chris) v4: - Use u64_to_user_ptr (Chris) - Don't forget to copy the last connector (Chris) v5: Chris was right ... Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
Joonas complained that writing ww_mutex_lock(&resv->lock, ctx) was too intrusive compared to reservation_object_lock(resv, ctx); Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
- 11 Dec, 2016 1 commit
-
-
Daniel Vetter authored
Just prep work to polish and consolidate all the dma-buf related documenation. Unfortunately I didn't discover a way to both integrate this new file into the overall toc while keeping it at the current place. Work around that by moving it into the overall driver-api/index.rst. Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
Jonathan Corbet <corbet@lwn.net>
-
- 10 Dec, 2016 1 commit
-
-
Daniel Vetter authored
We thought that no userspace is using them, but oops libdrm is using them to figure out whether a driver supports modesetting. Check out drmCheckModesettingSupported but maybe don't because it's horrible and totally runs counter to where we want to go with libdrm device handling. The function looks in the device hierarchy for whether controlD* exist using the following format string: /sys/bus/pci/devices/%04x:%02x:%02x.%d/drm/controlD%d The "/drm" subdirectory is the glue directory from the sysfs class stuff, and the only way to get at it seems to through kdev->kobj.parent (when kdev is represents e.g. the card0 chardev instance in sysfs). Git grep says we're not the only ones touching that, so I hope it's ok we dig into such internals - I couldn't find a proper interface for getting at the glue directory. Quick git grep shows that at least -amdgpu, -ati are using this. -modesetting do not, and on -intel it's only about the 4th fallback path for device lookup, which is why this didn't blow up earlier. Oh well, we need to keep it working, and the simplest way is to add a symlink at the right place in sysfs from controlD* to card*. v2: - Fix error path handling by adding if (!minor) return checks (David) - Fix the controlD* numbers to match what's been there (David) - Add a comment what exactly userspace minimally needs. - Correct the analysis for -intel (Chris). Fixes: 8a357d10 ("drm: Nerf DRM_CONTROL nodes") Cc: Dave Airlie <airlied@gmail.com> Reported-and-tested-by:
David Herrmann <dh.herrmann@gmail.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 09 Dec, 2016 2 commits
-
-
Daniel Vetter authored
vc4 already has a proper load sequence, but the unload one needed some fixups: First unregister, and last drop the final ref. Signed-off-by:
Eric Anholt <eric@anholt.net>
-
Boris Brezillon authored
Document the DT binding for the VEC (Video EnCoder) IP. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
