Fix percpu vmalloc allocations

Using virt_to_phys on percpu mappings is horribly wrong as it may be
backed by vmalloc.  Introduce kvm_kaddr_to_phys which translates both
types of valid kernel addresses to the corresponding physical address.

At the same time resolves a typing issue where we were storing the
physical address as a 32 bit unsigned long (on arm), truncating the
physical address for addresses above the 4GB limit.  This caused
breakage on Keystone.

Cc: <stable@vger.kernel.org>	[3.10+]
Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

Pull KVM changes from Paolo Bonzini:
 "Here are the 3.13 KVM changes.  There was a lot of work on the PPC
  side: the HV and emulation flavors can now coexist in a single kernel
  is probably the most interesting change from a user point of view.

  On the x86 side there are nested virtualization improvements and a few
  bugfixes.

  ARM got transparent huge page support, improved overcommit, and
  support for big endian guests.

  Finally, there is a new interface to connect KVM with VFIO.  This
  helps with devices that use NoSnoop PCI transactions, letting the
  driver in the guest execute WBINVD instructions.  This includes some
  nVidia cards on Windows, that fail to start without these patches and
  the corresponding userspace changes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
  kvm, vmx: Fix lazy FPU on nested guest
  arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu
  arm/arm64: KVM: MMIO support for BE guest
  kvm, cpuid: Fix sparse warning
  kvm: Delete prototype for non-existent function kvm_check_iopl
  kvm: Delete prototype for non-existent function complete_pio
  hung_task: add method to reset detector
  pvclock: detect watchdog reset at pvclock read
  kvm: optimize out smp_mb after srcu_read_unlock
  srcu: API for barrier after srcu read unlock
  KVM: remove vm mmap method
  KVM: IOMMU: hva align mapping page size
  KVM: x86: trace cpuid emulation when called from emulator
  KVM: emulator: cleanup decode_register_operand() a bit
  KVM: emulator: check rex prefix inside decode_register()
  KVM: x86: fix emulation of "movzbl %bpl, %eax"
  kvm_host: typo fix
  KVM: x86: emulate SAHF instruction
  MAINTAINERS: add tree for kvm.git
  Documentation/kvm: add a 00-INDEX file
  ...

Pull Xen updates from Konrad Rzeszutek Wilk:
 "This has tons of fixes and two major features which are concentrated
  around the Xen SWIOTLB library.

  The short <blurb> is that the tracing facility (just one function) has
  been added to SWIOTLB to make it easier to track I/O progress.
  Additionally under Xen and ARM (32 & 64) the Xen-SWIOTLB driver
  "is used to translate physical to machine and machine to physical
  addresses of foreign[guest] pages for DMA operations" (Stefano) when
  booting under hardware without proper IOMMU.

  There are also bug-fixes, cleanups, compile warning fixes, etc.

  The commit times for some of the commits is a bit fresh - that is b/c
  we wanted to make sure we have the Ack's from the ARM folks - which
  with the string of back-to-back conferences took a bit of time.  Rest
  assured - the code has been stewing in #linux-next for some time.

  Features:
   - SWIOTLB has tracing added when doing bounce buffer.
   - Xen ARM/ARM64 can use Xen-SWIOTLB.  This work allows Linux to
     safely program real devices for DMA operations when running as a
     guest on Xen on ARM, without IOMMU support. [*1]
   - xen_raw_printk works with PVHVM guests if needed.

  Bug-fixes:
   - Make memory ballooning work under HVM with large MMIO region.
   - Inform hypervisor of MCFG regions found in ACPI DSDT.
   - Remove deprecated IRQF_DISABLED.
   - Remove deprecated __cpuinit.

  [*1]:
  "On arm and arm64 all Xen guests, including dom0, run with second
   stage translation enabled.  As a consequence when dom0 programs a
   device for a DMA operation is going to use (pseudo) physical
   addresses instead machine addresses.  This work introduces two trees
   to track physical to machine and machine to physical mappings of
   foreign pages.  Local pages are assumed mapped 1:1 (physical address
   == machine address).  It enables the SWIOTLB-Xen driver on ARM and
   ARM64, so that Linux can translate physical addresses to machine
   addresses for dma operations when necessary.  " (Stefano)"

* tag 'stable/for-linus-3.13-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (32 commits)
  xen/arm: pfn_to_mfn and mfn_to_pfn return the argument if nothing is in the p2m
  arm,arm64/include/asm/io.h: define struct bio_vec
  swiotlb-xen: missing include dma-direction.h
  pci-swiotlb-xen: call pci_request_acs only ifdef CONFIG_PCI
  arm: make SWIOTLB available
  xen: delete new instances of added __cpuinit
  xen/balloon: Set balloon's initial state to number of existing RAM pages
  xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas.
  xen: remove deprecated IRQF_DISABLED
  x86/xen: remove deprecated IRQF_DISABLED
  swiotlb-xen: fix error code returned by xen_swiotlb_map_sg_attrs
  swiotlb-xen: static inline xen_phys_to_bus, xen_bus_to_phys, xen_virt_to_bus and range_straddles_page_boundary
  grant-table: call set_phys_to_machine after mapping grant refs
  arm,arm64: do not always merge biovec if we are running on Xen
  swiotlb: print a warning when the swiotlb is full
  swiotlb-xen: use xen_dma_map/unmap_page, xen_dma_sync_single_for_cpu/device
  xen: introduce xen_dma_map/unmap_page and xen_dma_sync_single_for_cpu/device
  tracing/events: Fix swiotlb tracepoint creation
  swiotlb-xen: use xen_alloc/free_coherent_pages
  xen: introduce xen_alloc/free_coherent_pages
  ...

Pull virtio updates from Rusty Russell:
 "Nothing really exciting: some groundwork for changing virtio endian,
  and some robustness fixes for broken virtio devices, plus minor
  tweaks"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_scsi: verify if queue is broken after virtqueue_get_buf()
  x86, asmlinkage, lguest: Pass in globals into assembler statement
  virtio: mmio: fix signature checking for BE guests
  virtio_ring: adapt to notify() returning bool
  virtio_net: verify if queue is broken after virtqueue_get_buf()
  virtio_console: verify if queue is broken after virtqueue_get_buf()
  virtio_blk: verify if queue is broken after virtqueue_get_buf()
  virtio_ring: add new function virtqueue_is_broken()
  virtio_test: verify if virtqueue_kick() succeeded
  virtio_net: verify if virtqueue_kick() succeeded
  virtio_ring: let virtqueue_{kick()/notify()} return a bool
  virtio_ring: change host notification API
  virtio_config: remove virtio_config_val
  virtio: use size-based config accessors.
  virtio_config: introduce size-based accessors.
  virtio_ring: plug kmemleak false positive.
  virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PM

Pull module updates from Rusty Russell:
 "Mainly boring here, too.  rmmod --wait finally removed, though"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost: fix bogus 'exported twice' warnings.
  init: fix in-place parameter modification regression
  asmlinkage, module: Make ksymtab and kcrctab symbols and __this_module __visible
  kernel: add support for init_array constructors
  modpost: Optionally ignore secondary errors seen if a single module build fails
  module: remove rmmod --wait option.

Merge patches from Andrew Morton:
 - memstick fixes

 - the rest of MM

 - various misc bits that were awaiting merges from linux-next into
   mainline: seq_file, printk, rtc, completions, w1, softirqs, llist,
   kfifo, hfsplus

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (72 commits)
  cmdline-parser: fix build
  hfsplus: Fix undefined __divdi3 in hfsplus_init_header_node()
  kfifo API type safety
  kfifo: kfifo_copy_{to,from}_user: fix copied bytes calculation
  sound/core/memalloc.c: use gen_pool_dma_alloc() to allocate iram buffer
  llists-move-llist_reverse_order-from-raid5-to-llistc-fix
  llists: move llist_reverse_order from raid5 to llist.c
  kernel: fix generic_exec_single indentation
  kernel-provide-a-__smp_call_function_single-stub-for-config_smp-fix
  kernel: provide a __smp_call_function_single stub for !CONFIG_SMP
  kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS
  revert "softirq: Add support for triggering softirq work on softirqs"
  drivers/w1/masters/w1-gpio.c: use dev_get_platdata()
  sched: remove INIT_COMPLETION
  tree-wide: use reinit_completion instead of INIT_COMPLETION
  sched: replace INIT_COMPLETION with reinit_completion
  drivers/rtc/rtc-hid-sensor-time.c: enable HID input processing early
  drivers/rtc/rtc-hid-sensor-time.c: use dev_get_platdata()
  vsprintf: ignore %n again
  seq_file: remove "%n" usage from seq_file users
  ...

Fix following errors:

  include/linux/cmdline-parser.h:17:12: error: 'BDEVNAME_SIZE' undeclared here
  block/cmdline-parser.c:17:2: error: implicit declaration of function 'kzalloc'
Signed-off-by: Alexander Beregalov <alexander.beregalov@intel.com>
Cc: CaiZhiyong <caizhiyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ERROR: "__divdi3" [fs/hfsplus/hfsplus.ko] undefined!

Introduced by commit 099e9245 ("hfsplus: implement attributes file's
header node initialization code").

i_size_read() returns loff_t, which is long long, i.e.  64-bit.  node_size
is size_t, which is either 32-bit or 64-bit.  Hence
"i_size_read(attr_file) / node_size" is a 64-by-32 or 64-by-64 division,
causing (some versions of) gcc to emit a call to __divdi3().

Fortunately node_size is actually 16-bit, as the sole caller of
hfsplus_init_header_node() passes a u16.  Hence change its type from
size_t to u16, and use do_div() to perform a 64-by-32 division.

Not seen in m68k/allmodconfig in -next, so it really depends on the
verion of gcc.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch enhances the type safety for the kfifo API.  It is now safe
to put const data into a non const FIFO and the API will now generate a
compiler warning when reading from the fifo where the destination
address is pointing to a const variable.

As a side effect the kfifo_put() does now expect the value of an element
instead a pointer to the element.  This was suggested Russell King.  It
make the handling of the kfifo_put easier since there is no need to
create a helper variable for getting the address of a pointer or to pass
integers of different sizes.

IMHO the API break is okay, since there are currently only six users of
kfifo_put().

The code is also cleaner by kicking out the "if (0)" expressions.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

'copied' and 'len' are in bytes, while 'ret' is in elements, so we need to
multiply 'ret' with the size of one element to get the correct result.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.
Signed-off-by: Nicolin Chen <b42378@freescale.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix comment typo, per Jan

Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make this useful helper available for other users.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86_64 allnoconfig:

  kernel/up.c:25: error: redefinition of '__smp_call_function_single'
  include/linux/smp.h:154: note: previous definition of '__smp_call_function_single' was here

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This commit was incomplete in that code to remove items from the per-cpu
lists was missing and never acquired a user in the 5 years it has been in
the tree.  We're going to implement what it seems to try to archive in a
simpler way, and this code is in the way of doing so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All users are converted over to reinit_completion(). Remove the old
macro now.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For the casual device driver writer, it is hard to remember when to use
init_completion (to init a completion structure) or INIT_COMPLETION (to
*reinit* a completion structure).  Furthermore, while all other
completion functions exepct a pointer as a parameter, INIT_COMPLETION
does not.  To make it easier to remember which function to use and to
make code more readable, introduce a new inline function with the proper
name and consistent argument type.  Update the kernel-doc for
init_completion while we are here.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Enable the processing of HID input records before the RTC will be
registered, in order to allow the RTC register function to read clock.
Without doing that the clock can only be read after the probe function
has finished.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to
make the code simpler and enhance the readability.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This ignores %n in printf again, as was originally documented.
Implementing %n poses a greater security risk than utility, so it should
stay ignored.  To help anyone attempting to use %n, a warning will be
emitted if it is encountered.

Based on an earlier patch by Joe Perches.

Because %n was designed to write to pointers on the stack, it has been
frequently used as an attack vector when bugs are found that leak
user-controlled strings into functions that ultimately process format
strings.  While this class of bug can still be turned into an
information leak, removing %n eliminates the common method of elevating
such a bug into an arbitrary kernel memory writing primitive,
significantly reducing the danger of this class of bug.

For seq_file users that need to know the length of a written string for
padding, please see seq_setwidth() and seq_pad() instead.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All seq_printf() users are using "%n" for calculating padding size,
convert them to use seq_setwidth() / seq_pad() pair.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are several users who want to know bytes written by seq_*() for
alignment purpose.  Currently they are using %n format for knowing it
because seq_*() returns 0 on success.

This patch introduces seq_setwidth() and seq_pad() for allowing them to
align without using %n format.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Avoid the fragile Kconfig construct guestimating spinlock_t sizes; use a
friendly compile-time test to determine this.

[kirill.shutemov@linux.intel.com: drop CONFIG_CMPXCHG_LOCKREF]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If DEBUG_SPINLOCK and DEBUG_LOCK_ALLOC are enabled spinlock_t on x86_64
is 72 bytes.  For page->ptl they will be allocated from kmalloc-96 slab,
so we loose 24 on each.  An average system can easily allocate few tens
thousands of page->ptl and overhead is significant.

Let's create a separate slab for page->ptl allocation to solve this.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use kernel/bounds.c to convert build-time spinlock_t size check into a
preprocessor symbol and apply that to properly separate the page::ptl
situation.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If split page table lock is in use, we embed the lock into struct page
of table's page.  We have to disable split lock, if spinlock_t is too
big be to be embedded, like when DEBUG_SPINLOCK or DEBUG_LOCK_ALLOC
enabled.

This patch add support for dynamic allocation of split page table lock
if we can't embed it to struct page.

page->ptl is unsigned long now and we use it as spinlock_t if
sizeof(spinlock_t) <= sizeof(long), otherwise it's pointer to spinlock_t.

The spinlock_t allocated in pgtable_page_ctor() for PTE table and in
pgtable_pmd_page_ctor() for PMD table.  All other helpers converted to
support dynamically allocated page->ptl.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

At the moment xtensa uses slab allocator for PTE table.  It doesn't work
with enabled split page table lock: slab uses page->slab_cache and
page->first_page for its pages.  These fields share stroage with
page->ptl.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>