- 09 Apr, 2010 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (29 commits) drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers drm/nv50: implement gpio set/get routines drm/nv50: parse/use some more de-magiced parts of gpio table entries drm/nouveau: store raw gpio table entry in bios gpio structs drm/nv40: Init some tiling-related PGRAPH state. drm/nv50: Add NVA3 support in ctxprog/ctxvals generator. drm/nv50: another dodgy DP hack drm/nv50: punt hotplug irq handling out to workqueue drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders drm/nv50: Allow using the NVA3 new compute class. drm/nv50: cleanup properly if PDISPLAY init fails drm/nouveau: fixup the init failure paths some more drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark drm/nv40: add LVDS table quirk for Dell Latitude D620 drm/nv40: rework lvds table parsing drm/nouveau: detect vram amount once, and save the value drm/nouveau: remove some unused members from drm_nouveau_private drm/nouveau: Make use of TTM busy_placements. drm/nv50: add more 0x100c80 flushy magic drm/nv50: fix fbcon when framebuffer above 4GiB mark ...
-
David Howells authored
radix_tree_tag_get() is not safe to use concurrently with radix_tree_tag_set() or radix_tree_tag_clear(). The problem is that the double tag_get() in radix_tree_tag_get(): if (!tag_get(node, tag, offset)) saw_unset_tag = 1; if (height == 1) { int ret = tag_get(node, tag, offset); may see the value change due to the action of set/clear. RCU is no protection against this as no pointers are being changed, no nodes are being replaced according to a COW protocol - set/clear alter the node directly. The documentation in linux/radix-tree.h, however, says that radix_tree_tag_get() is an exception to the rule that "any function modifying the tree or tags (...) must exclude other modifications, and exclude any functions reading the tree". The problem is that the next statement in radix_tree_tag_get() checks that the tag doesn't vary over time: BUG_ON(ret && saw_unset_tag); This has been seen happening in FS-Cache: https://www.redhat.com/archives/linux-cachefs/2010-April/msg00013.html To this end, remove the BUG_ON() from radix_tree_tag_get() and note in various comments that the value of the tag may change whilst the RCU read lock is held, and thus that the return value of radix_tree_tag_get() may not be relied upon unless radix_tree_tag_set/clear() and radix_tree_delete() are excluded from running concurrently with it. Reported-by:Romain DEGEZ <romain.degez@smartjog.com> Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Pekka Enberg authored
As suggested by Linus, fix up kmem_ptr_validate() to handle non-kernel pointers more graciously. The patch changes kmem_ptr_validate() to use the newly introduced kern_ptr_validate() helper to check that a pointer is a valid kernel pointer before we attempt to convert it into a 'struct page'. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Matt Mackall <mpm@selenic.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Acked-by:
Christoph Lameter <cl@linux-foundation.org> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Pekka Enberg authored
As suggested by Linus, introduce a kern_ptr_validate() helper that does some sanity checks to make sure a pointer is a valid kernel pointer. This is a preparational step for fixing SLUB kmem_ptr_validate(). Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Matt Mackall <mpm@selenic.com> Cc: Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Linus Torvalds authored
This reverts commit ba168fc3. It changes user-visible sysfs interfaces, and breaks some existing user space applications which apparently rely on the fact that the output does not contain the "0x" prefix. Requested-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Dave Airlie authored
* 'nouveau/for-airlied' of ../drm-nouveau-next: (21 commits) drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers drm/nv50: implement gpio set/get routines drm/nv50: parse/use some more de-magiced parts of gpio table entries drm/nouveau: store raw gpio table entry in bios gpio structs drm/nv40: Init some tiling-related PGRAPH state. drm/nv50: Add NVA3 support in ctxprog/ctxvals generator. drm/nv50: another dodgy DP hack drm/nv50: punt hotplug irq handling out to workqueue drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders drm/nv50: Allow using the NVA3 new compute class. drm/nv50: cleanup properly if PDISPLAY init fails drm/nouveau: fixup the init failure paths some more drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark drm/nv40: add LVDS table quirk for Dell Latitude D620 drm/nv40: rework lvds table parsing drm/nouveau: detect vram amount once, and save the value drm/nouveau: remove some unused members from drm_nouveau_private drm/nouveau: Make use of TTM busy_placements. drm/nv50: add more 0x100c80 flushy magic drm/nv50: fix fbcon when framebuffer above 4GiB mark ...
-
Ben Skeggs authored
There's one known case where we never stop recieving DEFER, and loop here forever. Lets not do that.. Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
And use our own version of the GPIO table for the INIT_GPIO opcode. Signed-off-by: -
Francisco Jerez authored
Fixes garbled 3D on an nv46 card. Reported-by:
Francesco Marella <francesco.marella@gmail.com> Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Signed-off-by:
-
Marcin Kościelnicki authored
Signed-off-by:
Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by:
-
Ben Skeggs authored
Allows *some* DP cards to keep working in some corner cases that most people shouldn't hit. I hit it all the time with development, so this can stay for now. Signed-off-by: -
Ben Skeggs authored
On DP outputs we'll likely end up running vbios init tables here, which may sleep. Signed-off-by: -
Ben Skeggs authored
This value interacts with some registers we don't currently know how to program properly ourselves. The default of 5 that we were using matches what the VBIOS on early DP cards do, but later ones use 6, which would cause nouveau to program an incorrect mode on these chips. Signed-off-by: -
Marcin Kościelnicki authored
Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Should fix: https://bugzilla.redhat.com/show_bug.cgi?id=505132 https://bugzilla.redhat.com/show_bug.cgi?id=543091 https://bugzilla.redhat.com/show_bug.cgi?id=530425 https://bugs.edge.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/ +bug/539730 Signed-off-by:
-
Ben Skeggs authored
All indications seem to be that the version 0x30 table should be handled the same way as 0x40 (as used on G80), at least for the parts that we currently try use. This commit cleans up the parsing to make it clearer about what we're actually trying to achieve, and unifies the 0x30/0x40 parsing. Signed-off-by: -
Ben Skeggs authored
As opposed to repeatedly reading the amount back from the GPU every time we need to know the VRAM size. We should now fail to load gracefully on detecting no VRAM, rather than something potentially messy happening. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Francisco Jerez authored
Previously we were filling it the same as "placements", but in some cases there're valid alternatives that we were ignoring completely. Keeping a back-up memory type helps on several low-mem situations. Signed-off-by:
-
Ben Skeggs authored
Fixes the !vbo_fifo path in the 3D driver on certain chipsets. Still not really any good idea of what exactly the magic achieves, but it makes things work. While we're at it, in the PCIEGART path, flush on unbinding also. Signed-off-by: -
Ben Skeggs authored
This can't actually happen right now, but lets fix it anyway. Signed-off-by: -
Marcin Kościelnicki authored
Signed-off-by:
-
- 08 Apr, 2010 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: not overwriting file_lock structure after GET_LK cifs: Fix a kernel BUG with remote OS/2 server (try #3) [CIFS] initialize nbytes at the beginning of CIFSSMBWrite() [CIFS] Add mmap for direct, nobrl cifs mount types
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Fix accesses at LBA28 boundary (old bug, but nasty) (v2)
-
Mark Lord authored
Most drives from Seagate, Hitachi, and possibly other brands, do not allow LBA28 access to sector number 0x0fffffff (2^28 - 1). So instead use LBA48 for such accesses. This bug could bite a lot of systems, especially when the user has taken care to align partitions to 4KB boundaries. On misaligned systems, it is less likely to be encountered, since a 4KB read would end at 0x10000000 rather than at 0x0fffffff. Signed-off-by:
Mark Lord <mlord@pobox.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix sched_getaffinity()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Fix IDE taskfile with cfq scheduler ide: Must hold queue lock when requeueing ide: Requeue request after DMA timeout
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / PM: Move ACPI video resume to a PM notifier ACPI: Reduce ACPI resource conflict message to KERN_WARNING, printk cleanup ACPI: battery drivers should call power_supply_changed() ACPI: battery: Fix CONFIG_ACPI_SYSFS_POWER=n PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1 ACPI: Don't send KEY_UNKNOWN for random video notifications ACPI: NUMA: map pxms to low node ids ACPI: use _HID when supplied by root-level devices ACPI / ACPICA: Do not check reference counters in acpi_ev_enable_gpe() ACPI: fixes a false alarm from lockdep ACPI dock: support multiple ACPI dock devices ACPI: EC: Allow multibyte access to EC
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: hvc_console: Fix race between hvc_close and hvc_remove virtio: disable multiport console support. virtio: console makes incorrect assumption about virtio API virtio: console: Fix early_put_chars usage MAINTAINERS: Put the virtio-console entry in correct alphabetical order
-
Anton Blanchard authored
I don't claim to understand the tty layer, but it seems like hvc_open and hvc_close should be balanced in their kref reference counting. Right now we get a kref every call to hvc_open: if (hp->count++ > 0) { tty_kref_get(tty); <----- here spin_unlock_irqrestore(&hp->lock, flags); hvc_kick(); return 0; } /* else count == 0 */ tty->driver_data = hp; hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0 But hvc_close has: tty_kref_get(tty); if (--hp->count == 0) { ... /* Put the ref obtained in hvc_open() */ tty_kref_put(tty); ... } tty_kref_put(tty); Since the outside kref get/put balance we only do a single kref_put when count reaches 0. The patch below changes things to call tty_kref_put once for every hvc_close call, and with that my machine boots fine. Signed-off-by:Anton Blanchard <anton@samba.org> Acked-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Michael S. Tsirkin authored
Move MULTIPORT feature and related config changes out of exported headers, and disable the feature at runtime. At this point, it seems less risky to keep code around until we can enable it than rip it out completely. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Rusty Russell authored
The get_buf() API sets the second arg to the number of bytes *written* by the other side; in this case it should be zero as these are output buffers. lguest gets this right (obviously kvm's console doesn't), resulting in continual buildup of console writes. Signed-off-by:
-
François Diakhaté authored
Currently early_put_chars is not used by virtio_console because it can only be used once a port has been found, at which point it's too late because it is no longer needed. This patch should fix it. Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Amit Shah authored
Move around the entry for virtio-console to keep the file sorted. Signed-off-by:
-
- 07 Apr, 2010 1 commit
-
-
Kevin Hilman authored
rwsems can be used with IRQs disabled, particularily in early boot before IRQs are enabled. Currently the spin_unlock_irq() usage in the slow-patch will unconditionally enable interrupts and cause problems since interrupts are not yet initialized or enabled. This patch uses save/restore versions of IRQ spinlocks in the slowpath to ensure interrupts are not unintentionally disabled. Signed-off-by:
Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by:
-
