- 02 Oct, 2021 32 commits
-
-
Jakub Kicinski authored
Convert sw drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert misc arch drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Egress VLAN modification using VCAP ES0 on Ocelot switches This patch set adds support for modifying a VLAN ID at the egress stage of Ocelot/Felix switch ports. It is useful for replicating a packet on multiple ports, and each egress port sends it using a different VLAN ID. Tested by rewriting the VLAN ID of both (a) packets injected from the CPU port (b) packets received from an external station on a front-facing port Adding a selftest to make sure it doesn't bit-rot, and if it does, that it can be traced back easily. ==================== Signed-off-by: -
Vladimir Oltean authored
For this test we are exercising the VCAP ES0 block's ability to match on a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived from VID_A_VAL plus the classified VLAN. $eth3.200 is the generator port $eth0 is the bridged DUT port that receives $eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300 on egress via VCAP ES0 $eth2 is the port that receives from the DUT port $eth1 Since the egress rewriting happens outside the bridging service, VID 300 does not need to be in the bridge VLAN table of $eth1. Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
There will be one more VLAN modification selftest added, this time for egress. Rename the one that exists right now to be more specific. Signed-off-by:
-
Vladimir Oltean authored
Looks like when I wrote the selftests I was using a network manager that brought up the ports automatically. In order to not rely on that, let the script open them up. Signed-off-by:
-
Vladimir Oltean authored
Currently, all packets injected into Ocelot switches are classified to VLAN 0, regardless of whether they are VLAN-tagged or not. This is because the switch only looks at the VLAN TCI from the DSA tag. VLAN 0 is then stripped on egress due to REW_TAG_CFG_TAG_CFG. There are 2 cases really, below is the explanation for ocelot_port_set_native_vlan: - Port is VLAN-aware, we set REW_TAG_CFG_TAG_CFG to 1 (egress-tag all frames except VID 0 and the native VLAN) if a native VLAN exists, or to 3 otherwise (tag all frames, including VID 0). - Port is VLAN-unaware, we set REW_TAG_CFG_TAG_CFG to 0 (port tagging disabled, classified VLAN never appears in the packet). One can already see an inconsistency: when a native VLAN exists, VID 0 is egress-untagged, but when it doesn't, VID 0 is egress-tagged. So when we do this: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 bridge vlan del dev swp0 vid 1 bridge vlan add dev swp0 vid 1 pvid # but not untagged and we ping through swp0, packets will look like this: MAC > 33:33:00:00:00:02, ethertype 802.1Q (0x8100): vlan 0, p 0, ethertype 802.1Q (0x8100), vlan 1, p 0, ethertype IPv6 (0x86dd), ICMP6, router solicitation, length 16 So VID 1 frames (sent that way by the Linux bridge) are encapsulated in a VID 0 header - the classified VLAN of the packets as far as the hw is concerned. To avoid that, what we really need to do is stop injecting packets using the classified VLAN of 0. This patch strips the VLAN header from the skb payload, if that VLAN exists and if the port is under a VLAN-aware bridge. Then it copies that VLAN header into the DSA injection frame header. A positive side effect is that VCAP ES0 VLAN rewriting rules now work for packets injected from the CPU into a port that's under a VLAN-aware bridge, and we are able to match those packets by the VLAN ID that was sent by the network stack, and not by VLAN ID 0. Signed-off-by:
-
Vladimir Oltean authored
The VLAN TCI contains more than the VLAN ID, it also has the VLAN PCP and Drop Eligibility Indicator. If the ocelot driver is going to write the VLAN header inside the DSA tag, it could just as well write the entire TCI. Signed-off-by:
-
Vladimir Oltean authored
Currently the ocelot driver does support the 'vlan modify' action, but in the ingress chain, and it is offloaded to VCAP IS1. This action changes the classified VLAN before the packet enters the bridging service, and the bridging works with the classified VLAN modified by VCAP IS1. That is good for some use cases, but there are others where the VLAN must be modified at the stage of the egress port, after the packet has exited the bridging service. One example is simulating IEEE 802.1CB active stream identification filters ("active" means that not only the rule matches on a packet flow, but it is also able to change some headers). For example, a stream is replicated on two egress ports, but they must have different VLAN IDs on egress ports A and B. This seems like a task for the VCAP ES0, but that currently only supports pushing the ES0 tag A, which is specified in the rule. Pushing another VLAN header is not what we want, but rather overwriting the existing one. It looks like when we push the ES0 tag A, it is actually possible to not only take the ES0 tag A's value from the rule itself (VID_A_VAL), but derive it from the following formula: ES0_TAG_A = Classified VID + VID_A_VAL Otherwise said, ES0_TAG_A can be used to increment with a given value the VLAN ID that the packet was already classified to, and the packet will have this value as an outer VLAN tag. This new VLAN ID value then gets stripped on egress (or not) according to the value of the native VLAN from the bridging service. While the hardware will happily increment the classified VLAN ID for all packets that match the ES0 rule, in practice this would be rather insane, so we only allow this kind of ES0 action if the ES0 filter contains a VLAN ID too, so as to restrict the matching on a known classified VLAN. If we program VID_A_VAL with the delta between the desired final VLAN (ES0_TAG_A) and the classified VLAN, we obtain the desired behavior. It doesn't look like it is possible with the tc-vlan action to modify the VLAN ID but not the PCP. In hardware it is possible to leave the PCP to the classified value, but we unconditionally program it to overwrite it with the PCP value from the rule. Signed-off-by: -
Geert Uytterhoeven authored
- Add missing clock-names property, - Add example compatible values for PHY subnode. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Geert Uytterhoeven authored
- Drop unneeded interrupt-parent, - Convert to new style CPG/MSSR bindings, - Add missing power-domains and resets properties, - Update PHY subnode: - Add example compatible values, - Add micrel,led-mode and reset-gpios examples. Signed-off-by: -
Gyumin Hwang authored
napi_gro_complete always returned the same value, NET_RX_SUCCESS And the value was not used anywhere Signed-off-by:
Gyumin Hwang <hkm73560@gmail.com> Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: housekeeping updates These are a few changes for code clean up and a couple more lock management tweaks. v2: rebased ==================== Signed-off-by: -
Shannon Nelson authored
Add the lif parameter for use in an error message, and to better match the style of most of the functions calls. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Simplify the code a little by keeping the send_to_hw decision inside of ionic_qcq_disable rather than in the callers. Also, add ENXIO to the decision expression. Signed-off-by:
-
Shannon Nelson authored
Split the adminq wait into smaller polling periods in order to watch for broken firmware and not have to wait for the full adminq devcmd_timeout. Generally, adminq commands take fewer than 2 msecs. If the FW is busy they can take longer, but usually still under 100 msecs. We set the polling period to 100 msecs in order to start snooping on FW status when a command is taking longer than usual. Signed-off-by:
-
Shannon Nelson authored
Widen the coverage of the queue_lock to be sure the lif init and lif deinit actions are protected. This addresses a hang seen when a Tx Timeout action was attempted at the same time as a FW Reset was started. Signed-off-by:
-
Shannon Nelson authored
Move creation and deletion of lif mutex a level out to lif creation and delete, rather than in init and deinit. This assures that nothing will get hung if anything is waiting on the mutex while the driver is clearing the lif while handling the fw_down/fw_up cycle. Signed-off-by:
-
Shannon Nelson authored
If the PCI connection is broken, reading the FW version string will only get 0xff bytes, which shouldn't get printed. This checks the first byte and prints only the first 4 bytes if non-ASCII. Also, add a limit to the string length printed when a valid string is found, just in case it is not properly terminated. Signed-off-by:
-
Shannon Nelson authored
These debug stats are not really useful, their collection is likely detrimental to performance, and they suck up a lot of memory which never gets used if no one ever enables the priv-flag to print them, so just remove these bits. Signed-off-by:
-
David S. Miller authored
Biju Das says: ==================== Fillup stubs for Gigabit Ethernet driver support The DMAC and EMAC blocks of Gigabit Ethernet IP found on RZ/G2L SoC are similar to the R-Car Ethernet AVB IP. The Gigabit Ethernet IP consists of Ethernet controller (E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller (DMAC). With a few changes in the driver we can support both IPs. This patch series is for adding Gigabit ethernet driver support to RZ/G2L SoC. The number of patches after incorporatng RFC review comments is 18. So split the patches into 2 patchsets (10 + 8). This series is the second patchset, aims to fillup all the stubs for the Gigabit Ethernet driver. This patch series depend upon [1] [1] https://lore.kernel.org/linux-renesas-soc/20211001150636.7500-1-biju.das.jz@bp.renesas.com/T/#t RFC->V1: * used rx_max_buf_size instead of rx_2k_buffers feature bit. * renamed "rgeth" to "gbeth". * renamed ravb_rx_ring_free to ravb_rx_ring_free_rcar * renamed ravb_rx_ring_format to ravb_rx_ring_format_rcar * renamed ravb_alloc_rx_desc to ravb_alloc_rx_desc_rcar * renamed ravb_rcar_rx to ravb_rx_rcar * Added Sergey's Rb tag for patch #6. * Moved CSR0 initialization to patch #8. ==================== Signed-off-by:
-
Biju Das authored
Initialize GbEthernet E-MAC found on RZ/G2L SoC. This patch also renames ravb_set_rate to ravb_set_rate_rcar and ravb_rcar_emac_init to ravb_emac_init_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Biju Das authored
RZ/G2L supports half duplex mode. Add a half_duplex hw feature bit to struct ravb_hw_info for supporting half duplex mode for RZ/G2L. Signed-off-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
-
Biju Das authored
E-MAC on R-Car supports magic packet detection, whereas RZ/G2L does not support this feature. Add magic_pkt to struct ravb_hw_info and enable this feature only for R-Car. Signed-off-by:
-
Biju Das authored
R-Car AVB-DMAC has 4 Transmit start request queues, whereas RZ/G2L has only 1 Transmit start request queue. Add a tsrq variable to struct ravb_hw_info to handle this difference. Signed-off-by:
-
Biju Das authored
R-Car supports gPTP feature whereas RZ/G2L does not support it. This patch excludes gtp feature support for RZ/G2L. Signed-off-by:
-
Biju Das authored
Initialize GbEthernet DMAC found on RZ/G2L SoC. Signed-off-by:
-
Biju Das authored
RZ/G2L SoC has Gigabit Ethernet IP consisting of Ethernet controller (E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller (DMAC). This patch adds compatible string for RZ/G2L and fills up the ravb_hw_info struct. Function stubs are added which will be used by gbeth_hw_info and will be filled incrementally. Signed-off-by:
-
Biju Das authored
R-Car supports network control queue whereas RZ/G2L does not support it. Add nc_queue to struct ravb_hw_info, so that NC queue is handled only by R-Car. This patch also renames ravb_rcar_dmac_init to ravb_dmac_init_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by:
-
Biju Das authored
Rename the variable "no_ptp_cfg_active" with "gptp" and "ptp_cfg_active" with "ccc_gac" to match the HW features. There is no functional change. Signed-off-by:
-
Biju Das authored
Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar" and replace the function pointer "set_rx_csum_feature" with "set_feature". Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== bpf-next 2021-10-02 We've added 85 non-merge commits during the last 15 day(s) which contain a total of 132 files changed, 13779 insertions(+), 6724 deletions(-). The main changes are: 1) Massive update on test_bpf.ko coverage for JITs as preparatory work for an upcoming MIPS eBPF JIT, from Johan Almbladh. 2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool, with driver support for i40e and ice from Magnus Karlsson. 3) Add legacy uprobe support to libbpf to complement recently merged legacy kprobe support, from Andrii Nakryiko. 4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky. 5) Support saving the register state in verifier when spilling <8byte bounded scalar to the stack, from Martin Lau. 6) Add libbpf opt-in for stricter BPF program section name handling as part of libbpf 1.0 effort, from Andrii Nakryiko. 7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov. 8) Fix skel_internal.h to propagate errno if the loader indicates an internal error, from Kumar Kartikeya Dwivedi. 9) Fix build warnings with -Wcast-function-type so that the option can later be enabled by default for the kernel, from Kees Cook. 10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it otherwise errors out when encountering them, from Toke Høiland-Jørgensen. 11) Teach libbpf to recognize specialized maps (such as for perf RB) and internally remove BTF type IDs when creating them, from Hengqi Chen. 12) Various fixes and improvements to BPF selftests. ==================== Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.netSigned-off-by:
-
- 01 Oct, 2021 8 commits
-
-
Sebastian Andrzej Siewior authored
napi_busy_loop() disables preemption and performs a NAPI poll. We can't acquire sleeping locks with disabled preemption which would be required while __napi_poll() invokes the callback of the driver. A threaded interrupt performing the NAPI-poll can be preempted on PREEMPT_RT. A RT thread on another CPU may observe NAPIF_STATE_SCHED bit set and busy-spin until it is cleared or its spin time runs out. Given it is the task with the highest priority it will never observe the NEED_RESCHED bit set. In this case the time is better spent by simply sleeping. The NET_RX_BUSY_POLL is disabled by default (the system wide sysctls for poll/read are set to zero). Disabling NET_RX_BUSY_POLL on PREEMPT_RT to avoid wrong locking context in case it is used. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20211001145841.2308454-1-bigeasy@linutronix.deSigned-off-by:
-
Andrii Nakryiko authored
Hengqi Chen says: ==================== Currently a bunch of (usually pretty specialized) BPF maps do not support specifying BTF types for they key and value. For such maps, specifying their definition like this: struct { __uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY); __type(key, int); __type(value, int); } my_perf_buf SEC(".maps"); Would actually produce warnings about retrying BPF map creation without BTF. Users are forced to know such nuances and use __uint(key_size, 4) instead. This is non-uniform, annoying, and inconvenient. This patch set teaches libbpf to recognize those specialized maps and removes BTF type IDs when creating BPF map. Also, update existing BPF selftests to exericse this change. ==================== Signed-off-by:Andrii Nakryiko <andrii@kernel.org>
-
Hengqi Chen authored
Change map definitions in BPF selftests to use BTF-defined key/value types. This unifies the map definitions and ensures libbpf won't emit warning about retrying map creation. Signed-off-by:
Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by:
-
Hengqi Chen authored
A bunch of BPF maps do not support specifying BTF types for key and value. This is non-uniform and inconvenient[0]. Currently, libbpf uses a retry logic which removes BTF type IDs when BPF map creation failed. Instead of retrying, this commit recognizes those specialized maps and removes BTF type IDs when creating BPF map. [0] Closes: https://github.com/libbpf/libbpf/issues/355Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2021-09-30 1) From Yevgeny Kliteynik: This patch series deals with vport handling in SW steering. For every vport, SW steering queries FW for this vport's properties, such as RX/TX ICM addresses to be able to add this vport as dest action. The following patches rework vport capabilities managements and add support for Scalable Functions (SFs). - Patch 1 fixes the vport number data type all over the DR code to 16 bits in accordance with HW spec. - Patch 2 replaces local SW steering WIRE_PORT macro with the existing mlx5 define. - Patch 3 adds missing query for vport 0 and and handles eswitch manager capabilities for ECPF (BlueField in embedded CPU mode). - Patch 4 fixes error messages for failure to obtain vport caps from different locations in the code to have the same verbosity level and similar wording. - Patch 5 adds support for csum recalculation flow tables on SFs: it implements these FTs management in XArray instead of the fixed size array, thus adding support for csum recalculation table for any valid vport. - Patch 6 is the main patch of this whole series: it refactors vports capabilities handling and adds SFs support. 2) Minor and trivial updates and cleanups * tag 'mlx5-updates-2021-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Use array_size() helper net/mlx5: Use struct_size() helper in kvzalloc() net/mlx5: Use kvcalloc() instead of kvzalloc() net/mlx5: Tolerate failures in debug features while driver load net/mlx5: Warn for devlink reload when there are VFs alive net/mlx5: DR, Add missing string for action type SAMPLER net/mlx5: DR, init_next_match only if needed net/mlx5: DR, Fix typo 'offeset' to 'offset' net/mlx5: DR, Increase supported num of actions to 32 net/mlx5: DR, Add support for SF vports net/mlx5: DR, Support csum recalculation flow table on SFs net/mlx5: DR, Align error messages for failure to obtain vport caps net/mlx5: DR, Add missing query for vport 0 net/mlx5: DR, Replace local WIRE_PORT macro with the existing MLX5_VPORT_UPLINK net/mlx5: DR, Fix vport number data type to u16 ==================== Link: https://lore.kernel.org/r/20210930232050.41779-1-saeed@kernel.orgSigned-off-by:
-
Johan Almbladh authored
This patch adds a set of tests of BPF_LDX_MEM where both operand registers are the same register. Mainly testing 32-bit JITs that may load a 64-bit value in two 32-bit loads, and must not overwrite the address register. Signed-off-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-11-johan.almbladh@anyfinetworks.com
-
Johan Almbladh authored
This patch adds a tests of ALU32 and ALU64 LSH/RSH/ARSH operations for the case when the two operands are the same register. Mainly intended to test JITs that implement ALU64 shifts with 32-bit CPU instructions. Also renamed related helper functions for consistency with the new tests. Signed-off-by:
-
Johan Almbladh authored
This patch adds tests of all register combinations for BPF_ATOMIC operations on both BPF_W and BPF_DW sizes. Signed-off-by:
-
