Allow to set the report ID in UCLOGIC_RDESC_FRAME_BYTES instead of
using a hardcoded value.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Simplify the UCLOGIC_RDESC_BUTTONPAD_BYTES macro by passing as param
the size of the report to pad to in bytes.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Switch from matching UC-Logic subreport with a mask to a full value to
support detecting Huion HS610 touch dial reports. Those would match the
button mask otherwise.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Replace a single pen_frame_flag in struct uclogic_params with
subreport_list in struct uclogic_params_pen to prepare for handling more
subreports in Huion HS610.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Remove support for pen usage masking from hid-uclogic. Disable whole
interfaces instead. Most of those interfaces are useless, and if there
is one which has an unused pen usage, but also has useful reports, its
report descriptor should be rewritten instead.

This simplifies the code and the data structures.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Explicitly change report ID to virtual ID and handle virtual frame
reports as real for consistency.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Early return when a non-input raw event is received to simplify the
logic present in uclogic_raw_event.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Simplify the raw event handling code by accessing the
uclogic_params_pen/uclogic_params_frame structs directly.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In order to avoid ending up with  a big uclogic_raw_event function,
split it in two smaller functions: uclogic_raw_event_pen for the pen
events and uclogic_raw_event_frame for the pad events.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Support reporting 13th frame button for Huion tablets. This supports
reporting the button in the center of the dial for Huion HS610.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since the 006d Huion PID is used by multiple tablets (at least HS64 and
HS610), rename its constant to a more general
"USB_DEVICE_ID_HUION_TABLET2".
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for Huion v2 protocol tilt reporting. Describe reports as
angles in degrees, which is not exactly true, but there doesn't seem to
be a straightforward, consistent conversion possible, and what's
reported would have to be enough.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:

 - memory leak fix for hid-elo driver (Dongliang Mu)

 - fix for hangs on newer AMD platforms with amd_sfh-driven hardware
   (Basavaraj Natikar )

 - locking fix in i2c-hid (Daniel Thompson)

 - a few device-ID specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: amd_sfh: Add interrupt handler to process interrupts
  HID: amd_sfh: Add functionality to clear interrupts
  HID: amd_sfh: Disable the interrupt for all command
  HID: amd_sfh: Correct the structure field name
  HID: amd_sfh: Handle amd_sfh work buffer in PM ops
  HID:Add support for UGTABLET WP5540
  HID: amd_sfh: Add illuminance mask to limit ALS max value
  HID: amd_sfh: Increase sensor command timeout
  HID: i2c-hid: goodix: Fix a lockdep splat
  HID: elo: fix memory leak in elo_probe
  HID: apple: Set the tilde quirk flag on the Wellspring 5 and later

Pull btrfs fixes from David Sterba:

 - yield CPU more often when defragmenting a large file

 - skip defragmenting extents already under writeback

 - improve error message when send fails to write file data

 - get rid of warning when mounted with 'flushoncommit'

* tag 'for-5.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: send: in case of IO error log it
  btrfs: get rid of warning on transaction commit when using flushoncommit
  btrfs: defrag: don't try to defrag extents which are under writeback
  btrfs: don't hold CPU for too long when defragging a file

Pull parisc architecture fixes from Helge Deller:

 - Fix miscompilations when function calls are made from inside a
   put_user() call

 - Drop __init from map_pages() declaration to avoid random boot crashes

 - Added #error messages if a 64-bit compiler was used to build a 32-bit
   kernel (and vice versa)

 - Fix out-of-bound data TLB miss faults in sba_iommu and ccio-dma
   drivers

 - Add ioread64_lo_hi() and iowrite64_lo_hi() functions to avoid kernel
   test robot errors

 - Fix link failure when 8250_gsc driver is built without CONFIG_IOSAPIC

* tag 'for-5.17/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  serial: parisc: GSC: fix build when IOSAPIC is not set
  parisc: Fix some apparent put_user() failures
  parisc: Show error if wrong 32/64-bit compiler is being used
  parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()
  parisc: Fix sglist access in ccio-dma.c
  parisc: Fix data TLB miss in sba_unmap_sg
  parisc: Drop __init from map_pages declaration

Merge tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Rework use of DMA_BIT_MASK in vmbus to work around a clang bug
   (Michael Kelley)

 - Fix NUMA topology (Long Li)

 - Fix a memory leak in vmbus (Miaoqian Lin)

 - One minor clean-up patch (Cai Huoqing)

* tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: utils: Make use of the helper macro LIST_HEAD()
  Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64)
  Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj
  PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology

There is a build error when using a kernel .config file from
'kernel test robot' for a different build problem:

hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3':
(.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq'

when:
  CONFIG_GSC=y
  CONFIG_SERIO_GSCPS2=y
  CONFIG_SERIAL_8250_GSC=y
  CONFIG_PCI is not set
    and hence PCI_LBA is not set.
  IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled.

Make the use of iosapic_serial_irq() conditional to fix the build error.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-serial@vger.kernel.org
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>

Merge tag 'regulator-fix-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One fix here, for initialisation of regulators that don't have an
  in_enabled() operation which would mainly impact cases where they
  aren't otherwise used during early setup for some reason"

* tag 'regulator-fix-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: fix false positive in regulator_late_cleanup()

On newer AMD platforms with SFH, it is observed that random interrupts
get generated on the SFH hardware and until this is cleared the firmware
sensor processing is stalled, resulting in no data been received to
driver side.

Add routines to handle these interrupts, so that firmware operations are
not stalled.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Newer AMD platforms with SFH may generate interrupts on some events
which are unwarranted. Until this is cleared the actual MP2 data
processing maybe stalled in some cases.

Add a mechanism to clear the pending interrupts (if any) during the
driver initialization and sensor command operations.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Sensor data is processed in polling mode. Hence disable the interrupt
for all sensor command.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Misinterpreted intr_enable field name. Hence correct the structure
field name accordingly to reflect the functionality.

Fixes: f264481a ("HID: amd_sfh: Extend driver capabilities for multi-generation support")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since in the current amd_sfh design the sensor data is periodically
obtained in the form of poll data, during the suspend/resume cycle,
scheduling a delayed work adds no value.

So, cancel the work and restart back during the suspend/resume cycle
respectively.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

After commit 4b9d2a73 ("parisc: Switch user access functions
to signal errors in r29 instead of r8") bash suddenly started
to report those warnings after login:

-bash: cannot set terminal process group (-1): Bad file descriptor
-bash: no job control in this shell

It turned out, that a function call inside a put_user(), e.g.:
put_user(vt_do_kdgkbmode(console), (int __user *)arg);
clobbered the error register (r29) and thus the put_user() call itself
seem to have failed.

Rearrange the C-code to pre-calculate the intermediate value
and then do the put_user().
Additionally prefer the "+" constraint on pu_err and gu_err registers
to tell the compiler that those operands are both read and written by
the assembly instruction.
Reported-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 4b9d2a73 ("parisc: Switch user access functions to signal errors in r29 instead of r8")
Signed-off-by: Helge Deller <deller@gmx.de>

It happens quite often that people use the wrong compiler to build the
kernel:

make ARCH=parisc   -> builds the 32-bit kernel
make ARCH=parisc64 -> builds the 64-bit kernel

This patch adds a sanity check which errors out with an instruction how
use the correct ARCH= option.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.15+

Merge tag 'kbuild-fixes-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the truncated path issue for HAVE_GCC_PLUGINS test in Kconfig

 - Move -Wunsligned-access to W=1 builds to avoid sprinkling warnings
   for the latest Clang

 - Fix missing fclose() in Kconfig

 - Fix Kconfig to touch dep headers correctly when KCONFIG_AUTOCONFIG is
   overridden.

* tag 'kbuild-fixes-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix failing to generate auto.conf
  kconfig: fix missing fclose() on error paths
  Makefile.extrawarn: Move -Wunaligned-access to W=1
  kconfig: let 'shell' return enough output for deep path names

Pull irq fixes from Thomas Gleixner:
 "Interrupt chip driver fixes:

   - Don't install an hotplug notifier for GICV3-ITS on systems which do
     not need it to prevent a warning in the notifier about inconsistent
     state

   - Add the missing device tree matching for the T-HEAD PLIC variant so
     the related SoC is properly supported"

* tag 'irq-urgent-2022-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Add missing thead,c900-plic match string
  dt-bindings: update riscv plic compatible string
  irqchip/gic-v3-its: Skip HP notifier when no ITS is registered

Pull objtool fix from Borislav Petkov:
 "Fix a case where objtool would mistakenly warn about instructions
  being unreachable"

* tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm

Pull scheduler fix from Borislav Petkov:
 "Fix a NULL-ptr dereference when recalculating a sched entity's weight"

* tag 'sched_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix fault in reweight_entity

Pull perf fix from Borislav Petkov:
 "Prevent cgroup event list corruption when switching events"

* tag 'perf_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix list corruption in perf_cgroup_switch()

Pull x86 fix from Borislav Petkov:
 "Prevent softlockups when tearing down large SGX enclaves"

* tag 'x86_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Silence softlockup detection when releasing large enclaves

Pull cifs fixes from Steve French:
 "Three small smb3 reconnect fixes and an error log clarification"

* tag '5.17-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: mark sessions for reconnection in helper function
  cifs: call helper functions for marking channels for reconnect
  cifs: call cifs_reconnect when a connection is marked
  [smb3] improve error message when mount options conflict with posix

Merge tag 'irqchip-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

 - Don't register a hotplug notifier on GICv3 systems that advertise
   LPI support, but have no ITS to make use of it

 - Add missing DT matching for the thead,c900-plic variant of the
   SiFive PLIC

Link: https://lore.kernel.org/r/20220211110038.1179155-1-maz@kernel.org

Pull SCSI fixes from James Bottomley:
 "Two minor fixes in the lpfc driver. One changing the classification of
  trace messages and the other fixing a build issue when NVME_FC is
  disabled"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Reduce log messages seen after firmware download
  scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

Pull char/misc driver fixes from Greg KH:
 "Here are a small number of char/misc driver fixes for 5.17-rc4 for
  reported issues. They contain:

   - phy driver fixes

   - iio driver fix

   - eeprom driver fix

   - speakup regression fix

   - fastrpc fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL
  speakup-dectlk: Restore pitch setting
  bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W
  bus: mhi: pci_generic: Add mru_default for Foxconn SDX55
  eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
  misc: fastrpc: avoid double fput() on failed usercopy
  phy: dphy: Correct clk_pre parameter
  phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
  phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
  phy: xilinx: zynqmp: Fix bus width setting for SGMII
  phy: cadence: Sierra: fix error handling bugs in probe()
  phy: ti: Fix missing sentinel for clk_div_table
  phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
  phy: usb: Leave some clocks running during suspend

Pullstaging driver fixes from Greg KH:
 "Here are two staging driver fixes for 5.17-rc4.  These are:

   - fbtft error path fix

   - vc04_services rcu dereference fix

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fbtft: Fix error path in fbtft_driver_module_init()
  staging: vc04_services: Fix RCU dereference check

Pull tty/serial fixes from Greg KH:
 "Here are four small tty/serial fixes for 5.17-rc4.  They are:

   - 8250_pericom change revert to fix a reported regression

   - two speculation fixes for vt_ioctl

   - n_tty regression fix for polling

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt_ioctl: add array_index_nospec to VT_ACTIVATE
  vt_ioctl: fix array_index_nospec in vt_setactivate
  serial: 8250_pericom: Revert "Re-enable higher baud rates"
  n_tty: wake up poll(POLLRDNORM) on receiving data

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 5.17-rc4 that resolve some
  reported issues and add new device ids:

   - usb-serial new device ids

   - ulpi cleanup fixes

   - f_fs use-after-free fix

   - dwc3 driver fixes

   - ax88179_178a usb network driver fix

   - usb gadget fixes

  There is a revert at the end of this series to resolve a build problem
  that 0-day found yesterday. Most of these have been in linux-next,
  except for the last few, and all have now passed 0-day tests"

* tag 'usb-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"
  usb: dwc2: drd: fix soft connect when gadget is unconfigured
  usb: gadget: rndis: check size of RNDIS_MSG_SET command
  USB: gadget: validate interface OS descriptor requests
  usb: core: Unregister device on component_add() failure
  net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup
  usb: dwc3: gadget: Prevent core from processing stale TRBs
  USB: serial: cp210x: add CPI Bulk Coin Recycler id
  USB: serial: cp210x: add NCR Retail IO box id
  USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320
  usb: gadget: f_uac2: Define specific wTerminalType
  usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition
  usb: raw-gadget: fix handling of dual-direction-capable endpoints
  usb: usb251xb: add boost-up property support
  usb: ulpi: Call of_node_put correctly
  usb: ulpi: Move of_node_put to ulpi_dev_release
  USB: serial: option: add ZTE MF286D modem
  USB: serial: ch341: add support for GW Instek USB2.0-Serial devices
  usb: f_fs: Fix use-after-free for epfile
  usb: dwc3: xilinx: fix uninitialized return value

Pull s390 updates from Vasily Gorbik:
 "Maintainers and reviewers changes:

    - Add Alexander Gordeev as maintainer for s390.

    - Christian Borntraeger will focus on s390 KVM maintainership and
      stays as s390 reviewer.

  Fixes:

   - Fix clang build of modules loader KUnit test.

   - Fix kernel panic in CIO code on FCES path-event when no driver is
     attached to a device or the driver does not provide the path_event
     function"

* tag 's390-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: verify the driver availability for path_event call
  s390/module: fix building test_modules_helpers.o with clang
  MAINTAINERS: downgrade myself to Reviewer for s390
  MAINTAINERS: add Alexander Gordeev as maintainer for s390