Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

now that -mno-fdpic works, force it on so that
we can use any blackfin toolchain to build up the
kernel and kernel modules

wrap -mno-fdpic in $(call cc-option,-mno-fdpic) so that older
toolchains will still work
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Blackfin arch: use "char bfin_board_name[]" rather than "char *bfin_board_name" per discussion on lkml as the former uses less storage
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

We must balance calls to get_task_mm with corresponding mmput calls, otherwise
refcounting is screwed up and mms don't get freed when their task exits.
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Fix up /proc/cpuinfo so it is like everyone else, and gets
parsed by various applications properly. Still needs some tweaking on
parts without full L1 sram, like 532, 531, so it doesn't print out L1
bank info that doesn't exist.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

force irq_flags into the .data section by initializing it to
the hardware masks that cannot be disabled.  this way if we
use irq enable/disable functions before the .bss has been
zeroed out (as does our l1 relocate/dma functions), we dont
hit a problem where bss contains bogus crap.
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

* 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (29 commits)
  [PARISC] fix uninitialized variable warning in asm/rtc.h
  [PARISC] Port checkstack.pl to parisc
  [PARISC] Make palo target work when $obj != $src
  [PARISC] Zap unused variable warnings in pci.c
  [PARISC] Fix tests in palo target
  [PARISC] Fix palo target
  [PARISC] Restore palo target
  [PARISC] Attempt to clean up parisc/Makefile
  [PARISC] Fix infinite loop in /proc/iomem
  [PARISC] Quiet sysfs_create_link __must_check warnings in pdc_stable
  [PARISC] Squelch pci_enable_device __must_check warning in superio
  [PARISC] Kill off broken irqstack code
  [PARISC] Remove hardcoded uses of PAGE_SIZE
  [PARISC] Clean up pointless ASM_PAGE_SIZE_DIV use
  [PARISC] Kill off the last vestiges of ASM_PAGE_SIZE
  [PARISC] Kill off ASM_PAGE_SIZE use
  [PARISC] Beautify parisc vmlinux.lds.S
  [PARISC] Clean up a resource_size_t warning in sba_iommu
  [PARISC] Kill incorrect cast warning in unwinder
  [PARISC] Kill zone_to_nid printk warning
  ...

Fixed trivial conflict in include/asm-parisc/tlbflush.h manually

* ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: restore arch/{ppc/xtensa}/boot cflags
  kconfig: set title bar in xconfig
  kbuild: fix toplevel Makefile/depmod

Add new maintainers for the x86 (32-bit and 64-bit) architecture.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 7b96dc02 ("[SPARC] Videopix Frame
Grabber: Convert device_lock_sem to mutex") missed one place.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wrong order of arguments
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

get_rtc_time, in the case that PDC returns that the battery is bad, returns
an unmodified rtc_time arg to the caller, which then uses uninitialized
values. Fix this by memset-ing the arg with zeroes, so it will at least be
cleared if we return failure.

Spotted by John David Anglin.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

Commit 9a39e273 removed the boot directory
addition to CFLAGS that was being used by the subdirectory builds.  For the
other files, that patch set EXTRA_CFLAGS, but Makefile.build explicitly
sets that to empty as it is explicitly for a single directory only.
Append to KBUILD_CFLAGS instead.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Put kernel version info on title bar in xconfig (qconf) instead of
defaulting to "qconf".
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

This removes a syntax error (seen building on Ubuntu Feisty).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Stumbled upon when I was testing it out and using
make O=... to build.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

'bus' was basically useless and 'hba' is only applicable on
64bit. Sigh, there's got to be a cleaner way to do this...
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

This reverts commit a5bf3d89.

David Brownell notes that this causes a regression visible in the
drivers/usb/gadget Kconfig file:

  "That Kconfig hasn't changed (other than adding new drivers), and it's
   worked that way for several years now ...  so the issue seems to be
   changes in menuconfig/kconfig/etc semantics.

   The issue is that when USB_GADGET=m, it's no longer possible to
   configure peripheral controller drivers as modules ...  the
   controller drivers can now only be configured for static linkage.

   It should be making a choice of one of the controller drivers which
   could work on the target system, and allow that driver to be linked
   either as a module (ok iff USB_GADGET=m) or statically."

Reverting this commit resolves the problem, and also fixes a second
problem that David noticed: various dependent options couldn't be enabled.
Tested-and-reported-by: David Brownell <david-b@pacbell.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jan Beulich <jbeulich@novell.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits)
  fix do_sys_open() prototype
  sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake
  Documentation: Fix typo in SubmitChecklist.
  Typo: depricated -> deprecated
  Add missing profile=kvm option to Documentation/kernel-parameters.txt
  fix typo about TBI in e1000 comment
  proc.txt: Add /proc/stat field
  small documentation fixes
  Fix compiler warning in smount example program from sharedsubtree.txt
  docs/sysfs: add missing word to sysfs attribute explanation
  documentation/ext3: grammar fixes
  Documentation/java.txt: typo and grammar fixes
  Documentation/filesystems/vfs.txt: typo fix
  include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros
  trivial copy_data_pages() tidy up
  Fix typo in arch/x86/kernel/tsc_32.c
  file link fix for Pegasus USB net driver help
  remove unused return within void return function
  Typo fixes retrun -> return
  x86 hpet.h: remove broken links
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits)
  Fix build break in tsi108.c
  qeth: remove header_ops bug
  ir-functions.c:(.text+0xbce18): undefined reference to `input_event'
  NAPI: kconfig prompt and deleted doc file
  phy/bitbang: missing MODULE_LICENSE
  DM9000 initialization fix
  [PATCH] rt2x00: Add new rt73usb USB ID
  [PATCH] rt2x00: Fix residual check in PLCP calculations.
  [PATCH] iwlwifi: Fix rate setting in probe request for HW sacn
  [PATCH] b43: Make b43_stop() static
  [PATCH] drivers/net/wireless/b43/main.c: fix an uninitialized variable
  [PATCH] iwlwifi: set correct base rate for A band in rs_dbgfs_set_mcs
  [PATCH] zd1211rw, fix oops when ejecting install media
  [PATCH] b43legacy: Fix potential return of uninitialized variable
  [PATCH] iwl4965-base.c: fix off-by-one errors
  [PATCH] p54: Make filter configuration atomic
  [PATCH] rtl8187: remove NICMAC setting in configure_filters callback
  [PATCH] janitorial: fix all double includes in drivers/net/wireless
  [PATCH] rtl8187: Fix more frag bit checking, rts duration calc
  [PATCH] ipw2100: send WEXT scan events
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] sata_sis: use correct S/G table size
  pata_cs5536: MWDMA fix
  sata_sis: fix SCR read breakage
  libata: fix kernel-doc param name

Merge branch 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream

Fix build break:

drivers/net/tsi108_eth.c: In function 'tsi108_init_one':
drivers/net/tsi108_eth.c:1633: error: expected ')' before 'dev'
drivers/net/tsi108_eth.c:1633: warning: too few arguments for format
make[2]: *** [drivers/net/tsi108_eth.o] Error 1
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Remove qeth bug caused by commit:
[NET]: Move hardware header operations out of netdevice.
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

[bugme-daemon@bugzilla.kernel.org wrote:]

From: Randy Dunlap <randy.dunlap@oracle.com>

Drivers that use lro functions should depend on INET, otherwise they
may not link correctly.  Let's not select INET.  Select should be used
only for library-like code, not to enable subsystems.

ERROR: "lro_flush_all" [drivers/net/myri10ge/myri10ge.ko] undefined!
ERROR: "lro_receive_frags" [drivers/net/myri10ge/myri10ge.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

- make the kconfig NAPI option prompt consistent across all net drivers
  (other than EXPERIMENTAL; can it now be removed also, or is the new
  napi_struct implementation now EXPERIMENTAL ?)
- remove comment about the now-deleted NAPI_HOWTO.txt file
- clean up typos in Tulip NAPI & Interrupt Mitigation
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Missing MODULE_LICENSE(), loading this module taints the kernel.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

DM9000 driver returns success even if it is failed to detect the chip.
Below patch fixes it.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>

 drivers/net/dm9000.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Erez Zadok reports that certain configurations fail to build due to
schedule() TASK_[UN]INTERRUPTIBLE not being declared.  Add proper
include files to fix.

Cc: Erez Zadok <ezk@cs.sunysb.edu>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sata_sis has the same restrictions as other SFF controllers, and so must
use LIBATA_MAX_PRD to denote that SCSI may only fill ATA_MAX_PRD/2
entries, due to our need to handle IOMMU merging.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* Fix out-of-bound array access for MWDMA modes.

* Bump driver version.

Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

SCR read for controllers which uses PCI configuration space for SCR
access got broken while adding @val argument to SCR accessors.  Fix
it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>