- 01 Feb, 2022 22 commits
-
-
Thara Gopinath authored
Add LMh nodes for cpu cluster0 and cpu cluster1 for sm8150 SoC. Signed-off-by:
Thara Gopinath <thara.gopinath@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Petr Vorel authored
Fixes: bd943653 ("arm64: dts: qcom: Add device tree for Samsung J5 2015 (samsung-j5)") Signed-off-by:
Petr Vorel <petr.vorel@gmail.com> Reviewed-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Marijn Suijten authored
This reverts commit c23f1b77. The SM6125_VDDCX constant was replaced with 0 temporarily as the header patch defining this constant resided in a different branch, creating an unwanted dependency of the dts branch on the drivers branch. Now (by the time this patch will be applied) that both branches have been merged upstream, it is safe to revert to the constant again. Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by:
-
David Heidelberg authored
qcom,init-seq registers are in pairs Signed-off-by:
David Heidelberg <david@ixit.cz> Signed-off-by:
-
Luca Weiss authored
WLED is used for controlling the display backlight on this phone, so configure the node and enable it. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Signed-off-by:
-
Luca Weiss authored
WLED is used for controlling the backlight on some boards, add the node for it. Signed-off-by:
-
David Heidelberg authored
Follow common pattern for this device, first specific and then generic compatible. Signed-off-by:
-
Baruch Siach authored
Add the generic 'max-link-speed' property to describe the IPQ6018 PCIe link generation limit. This allows the generic dwc code to configure the link speed correctly. Signed-off-by:
Baruch Siach <baruch.siach@siklu.com> Signed-off-by:
-
Petr Vorel authored
Signed-off-by:
-
Petr Vorel authored
Signed-off-by:
-
Vladimir Zapolskiy authored
The change adds SM8250 cpufreq-epss controller interrupts for each CPU core cluster. Signed-off-by:
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by:
-
David Heidelberg authored
dt-schema expect to have fallback compatible, which is now in-place. Fixes warning generated by `make qcom/sdm845-oneplus-fajita.dtb`: arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: power-controller@c300000: compatible: ['qcom,sdm845-aoss-qmp'] is too short From schema: Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml Signed-off-by: -
David Heidelberg authored
QCOM BAM parses property `qcom,controlled-remotely` as a boolean, adjust dts to reflect that. Discovered while converting text documentation into yaml format. Signed-off-by:
-
Rob Herring authored
The msm8998 cache nodes have some issues. First, L1 caches are described within cpu nodes, not as separate nodes. The 'next-level-cache' property is of course in the correct location, otherwise the cache hierarchy walking would not work. Remove all the L1 cache nodes. Second, 'arm,arch-cache' is not a documented compatible string. "cache" is a sufficient compatible string for the Arm architected caches. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Felipe Balbi authored
Since commit d0a6ce59 ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)"), we can directly refer to pwrkey and resin by their new labels, respectively pon_pwrkey and pon_resin. Simplify microsof surface duo DTS by utilizing the new labels. Signed-off-by:
Felipe Balbi <felipe.balbi@microsoft.com> Signed-off-by:
-
Felipe Balbi authored
By listing relevant DMA channels for the various QUPv3 instances, we can work on adding support for DMA to the respective drivers. Signed-off-by:
-
David Heidelberg authored
Pure effort to avoid `make dtbs_check` warnings about memory@ nodes, which should have property device_type set to memory. Fixes warnings as: arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: memory@f5b00000: 'device_type' is a required property From schema: dtschema/schemas/memory.yaml Signed-off-by: -
Dmitry Baryshkov authored
Replace (unused) enable-gpio binding with schema-defined wake-gpios. The GPIO line is still unused, but at least we'd follow the defined schema. While we are at it, change perst-gpio property to follow the preferred naming schema (perst-gpios). Fixes: 13e948a3 ("arm64: dts: qcom: sm8250: Commonize PCIe pins") Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
-
Stephan Gerhold authored
qcom,apq8016-sbc-sndcard is now covered by the qcom,sm8250.yaml schema which has slightly different recommendations for the naming of properties and nodes. The old naming is still functional but deprecated. Update the &sound node in apq8016-sbc to fix the following dtbs_check warnings: apq8016-sbc.dt.yaml: sound@7702000: 'model' is a required property From schema: sound/qcom,sm8250.yaml apq8016-sbc.dt.yaml: sound@7702000: 'external-dai-link@0', ... do not match any of the regexes: '.*-dai-link$', ... From schema: sound/qcom,sm8250.yaml Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: -
David Heidelberg authored
Rename thermal zones according to dt-schema. Fixes multiple `make dtbs_check` warnings about name convetion. Signed-off-by:
-
David Heidelberg authored
Since 'qcom,apr-domain' is deprecated in favor of 'qcom,domain', update accordingly. Signed-off-by:
-
David Heidelberg authored
replace millivolt with correct microvolt and adjust value to the minimal value allowed by documentation. Found with `make qcom/sdm845-oneplus-fajita.dtb`. Fixes: arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias2-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias3-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias4-microvolt' is a required property From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-millivolt', 'qcom,micbias2-millivolt', 'qcom,micbias3-millivolt', 'qcom,micbias4-millivolt' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+' Fixes: 27ca1de0 ("arm64: dts: qcom: sdm845: add slimbus nodes") Signed-off-by:Steev Klimaszewski <steev@kali.org> Signed-off-by:
-
- 31 Jan, 2022 15 commits
-
-
Robert Foss authored
The clock-lanes property is no longer used as it is not programmable by the CSIPHY hardware block of Qcom ISPs and should be removed. Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
-
Robert Foss authored
The clock-lanes property is no longer used as it is not programmable by the CSIPHY hardware block of Qcom ISPs and should be removed. Signed-off-by:
-
Jean THOMAS authored
This commit implements a DTS file for LG Bullhead (Nexus 5X) rev 1.0 with its matching "qcom,board-id" property. Signed-off-by:
Jean THOMAS <virgule@jeanthomas.me> Reviewed-by:
-
Jean THOMAS authored
This patch puts the generic code common across all hardware revisions into a DTSI file. It also prefixes the DTS filename with the vendor name, to follow the naming convention used by other DTS files. Signed-off-by:
-
Douglas Anderson authored
Though sc7280 itself doesn't need any of the defines in gpio.h, it's highly likely that the actual boards will use them. Let's add the include to the sc7280.dtsi file so that boards don't need to do it. Suggested-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Douglas Anderson authored
This factors out a device tree fragment from some sc7280 device trees. It represents the device tree bits that should be included for "Chrome" based sc7280 boards. On these boards the bootloader (Coreboot + Depthcharge) configures things slightly different than the bootloader that Qualcomm provides. The modem firmware on these boards also works differently than on other Qulacomm products and thus the reserved memory map needs to be adjusted. NOTES: - This is _not_ quite a no-op change. The "herobrine" and "idp" fragments here were different and it looks like someone simply forgot to update the herobrine version. This updates a few numbers to match IDP. This will also cause the `pmk8350_pon` to be disabled on idp/crd, which I belive is a correct change. - At the moment this assumes LTE skus. Once it's clearer how WiFi SKUs will work (how much of the memory map they can reclaim) we may add an extra fragment that will rejigger one way or the other. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Douglas Anderson authored
The upcoming herobrine-r1 board is really not very similar to herobrine-r0. Let's get rid of the "herobrine.dtsi" file and stick all the content in the -r0 dts file directly. We'll also rename the dts so it's obvious that it's just for -r0. While renaming, let's actually name the file so it's obvious that "herobrine" is both the name of the board and the name of the "baseboard". In other words "herobrine" is an actual board but also often used as the name of a whole class of similar boards that forked from a design. While "herobrine-herobrine" is a bit of mouthful it makes it more obvious which things are part of an actual board rather than the baseboard. NOTE: herobrine-rev0's days are likely doomed and this device tree is likely to be deleted in the future. Signed-off-by:
-
Douglas Anderson authored
When processing sc7280 device trees, I can see: Warning (simple_bus_reg): /soc@0/gmu@3d69000: simple-bus unit address format error, expected "3d6a000" There's a clear typo in the node name. Fix it. Fixes: 96c47197 ("arm64: dts: qcom: sc7280: Add gpu support") Signed-off-by: -
Taniya Das authored
Add the camera clock controller node for SC7280 SoC. Signed-off-by:
Taniya Das <tdas@codeaurora.org> Reviewed-by:
-
Kuogee Hsieh authored
Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
Sankeerth Billakanti <quic_sbillaka@quicinc.com> Signed-off-by:
-
Sankeerth Billakanti authored
Add edp controller and phy DT nodes for sc7280. Signed-off-by:
Krishna Manikandan <quic_mkrishn@quicinc.com> Reviewed-by:
-
Rajeev Nandan authored
Add DSI controller and PHY nodes for sc7280. Signed-off-by:
Rajeev Nandan <quic_rajeevny@quicinc.com> Signed-off-by:
-
Krishna Manikandan authored
Add mdss and mdp DT nodes for sc7280. Signed-off-by:
-
Stephen Boyd authored
Some trogdor boards have on-board regulators for the MIPI camera components. Add nodes describing these regulators so boards with these supplies can consume them. Cc: Douglas Anderson <dianders@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Sandeep Maheswaram authored
Move USB2 controller and phy nodes from common dtsi file as it is required only for SKU1 board and change the mode to host mode as it will be used in host mode for SKU1. Signed-off-by:
Sandeep Maheswaram <quic_c_sanm@quicinc.com> Reviewed-by:
-
- 25 Jan, 2022 3 commits
-
-
Satya Priya authored
Add pmg1110 pmic regulators support. Signed-off-by:
Satya Priya <quic_c_skakit@quicinc.com> Reviewed-by:
-
David Heidelberg authored
Following naming convention, rename qcom,spmi@ node to spmi@ Signed-off-by:
-
Balakrishna Godavarthi authored
Add bluetooth SoC WCN6750 node for SC7280 IDP boards. Signed-off-by:
Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by:
-
