- 18 Aug, 2017 15 commits
-
-
Gustavo Padovan authored
Documentation for it was missing. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170731193655.6176-1-gustavo@padovan.org
-
Marco Franchi authored
Add driver for Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel. Datasheet available at: http://www.glyn.de/data/glyn/media/doc/43wvf1g-0.pdf Seiko 43WVF1G panel has two power supplies: avdd and dvdd and they require a specific power on/down sequence. For this reason the simple panel driver cannot be used to drive this panel, so create a new one heavily based on simple panel. Based on initial patch submission from Breno Lima. Signed-off-by:
Marco Franchi <marco.franchi@nxp.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500567179-6967-1-git-send-email-marco.franchi@nxp.com
-
Thierry Reding authored
drm/panel is a good candidate for the drm-misc group maintainership and it's been maintained in the common drm-misc tree for a release, so make it official. Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Fabio Estevam authored
The gpiod API checks for NULL descriptors, so there is no need to duplicate the check in the driver. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Jonathan Liu authored
During panel removal or system shutdown panel_simple_disable() is called which disables the panel backlight but the panel is still powered due to missing calls to panel_simple_unprepare(). Fixes: d02fd93e ("drm/panel: simple - Disable panel on shutdown") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by:
Jonathan Liu <net147@gmail.com> Signed-off-by:
-
Jonathan Liu authored
The physical size of the panel is 105.5 (W) x 67.2 (H) x 4.05 (D) mm but the active display area is 95.04 (W) x 53.856 (H) mm. The width and height should be set to the active display area. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Philippe CORNU authored
This patch adds Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel driver (MIPI-DSI video mode). The panel backlight is managed through the DSI link. This panel driver is used in several STM32 boards. Signed-off-by:
Philippe CORNU <philippe.cornu@st.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Philippe CORNU authored
The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using a MIPI-DSI video interface. Its backlight is managed through the DSI link. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Philippe CORNU authored
Orise Technology is headquartered in Taiwan and specializes in manufacture of Flat Panel Display Driver IC and Flat Panel Display Controller IC. Signed-off-by:
-
Fabio Estevam authored
When enable_gpio is provided via an I2C or SPI expander, it may not be available when panel-simple probes leading to the following error: panel-simple panel: failed to request GPIO: -517 As this error message is not very useful to the end user, skip printing it in the case of deferred probe. Signed-off-by:
-
Hoegeun Kwon authored
This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver which uses MIPI DSI bus to communicate with panel. The panel has 320×320 resolution in 1.63" physical panel. This panel is used in Samsung Galaxy Gear 2. Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by:
Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by:
-
Hoegeun Kwon authored
The Samsung S6E63J0X03 is a 1.63" 320x320 AMOLED panel connected using MIPI-DSI interfaces. Signed-off-by:
-
Sean Paul authored
Archit requested this backmerge to facilitate merging some patches depending on changes between -rc2 & -rc5 Signed-off-by:Sean Paul <seanpaul@chromium.org>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
NULL check at line 528: if (!sender || !data_out || !len_out) {, implies that pointer _sender_ might be NULL. Move pointer _sender_ dereference after NULL check in order to avoid a potential NULL pointer dereference. This issue was detected with the help of Coccinelle. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
- 17 Aug, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm changes for v4.14 * HDMI hot plug IRQ support (instead of polling) * Big driver cleanup from Laurent (no functional changes) * OMAP5 DSI support (only the pinmuxing was missing) * tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (60 commits) drm/omap: Potential NULL deref in omap_crtc_duplicate_state() drm/omap: remove no-op cleanup code drm/omap: rename omapdrm device back drm: omapdrm: Remove omapdrm platform data ARM: OMAP2+: Don't register omapdss device for omapdrm ARM: OMAP2+: Remove unused omapdrm platform device drm: omapdrm: Remove the omapdss driver drm: omapdrm: Register omapdrm platform device in omapdss driver drm: omapdrm: hdmi: Don't allocate PHY features dynamically drm: omapdrm: hdmi: Configure the PHY from the HDMI core version drm: omapdrm: hdmi: Configure the PLL from the HDMI core version drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix drm/omap: add OMAP5 DSIPHY lane-enable support drm/omap: use regmap_update_bit() when muxing DSI pads drm: omapdrm: Remove dss_features.h drm: omapdrm: Move supported outputs feature to dss driver drm: omapdrm: Move DSS_FCK feature to dss driver drm: omapdrm: Move PCD, LINEWIDTH and DOWNSCALE features to dispc driver ...
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More features for 4.14. Nothing too major here. I have a few more additional patches for large page support in vega10 among other things, but they require some resevation object patches from drm-misc-next, so I'll send that request once you've pulled the latest drm-misc-next. Highlights: - Fixes for ACP audio on stoney - SR-IOV fixes for vega10 - various powerplay fixes - lots of code clean up * 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (62 commits) drm/amdgpu/gfx7: fix function name drm/amd/amdgpu: Disabling Power Gating for Stoney platform drm/amd/amdgpu: Added a quirk for Stoney platform drm/amdgpu: jt_size was wrongly counted twice drm/amdgpu: fix missing endian-safe guard drm/amdgpu: ignore digest_size when loading sdma fw for raven drm/amdgpu: Uninitialized variable in amdgpu_ttm_backend_bind() drm/amd/powerplay: fix coding style in hwmgr.c drm/amd/powerplay: refine dmesg info under powerplay. drm/amdgpu: don't finish the ring if not initialized drm/radeon: Fix preferred typo drm/amdgpu: Fix preferred typo drm/radeon: Fix stolen typo drm/amdgpu: Fix stolen typo drm/amd/powerplay: fix coccinelle warnings in vega10_hwmgr.c drm/amdgpu: set gfx_v9_0_ip_funcs as static drm/radeon: switch to drm_*{get,put} helpers drm/amdgpu: switch to drm_*{get,put} helpers drm/amd/powerplay: add CZ profile support drm/amd/powerplay: fix PSI not enabled by kmd ...
-
- 16 Aug, 2017 23 commits
-
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
UAPI Changes: - vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric) Cross-subsystem Changes: - vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained in staging Core Changes: - atomic_legacy_backoff is officially killed (Daniel) - Extract drm_device.h (Daniel) - Unregister drm device on unplug (Daniel) - Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir) Driver Changes: - vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric) - various: Make various drm_*_funcs structs const (Bhumika) - tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David) - various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Cihangir Akturk <cakturk@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Noralf Trønnes <noralf@tronnes.org> * tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits) drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset() drm/virtio: Use the drm_driver.dumb_destroy default drm/bochs: Use the drm_driver.dumb_destroy default drm/mgag200: Use the drm_driver.dumb_destroy default drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults drm/msm: Use the drm_driver.dumb_destroy default drm/ast: Use the drm_driver.dumb_destroy default drm/qxl: Use the drm_driver.dumb_destroy default drm/udl: Use the drm_driver.dumb_destroy default drm/cirrus: Use the drm_driver.dumb_destroy default drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults drm/meson: Use .dumb_map_offset and .dumb_destroy defaults drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults drm/vc4: Continue the switch to drm_*_put() helpers drm/vc4: Fix leak of HDMI EDID dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2 dma-buf: add reservation_object_copy_fences (v2) drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD ... -
Colin Ian King authored
The function st7586_pipe_enable is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'st7586_pipe_enable' was not declared. Should it be static? Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-By:
David Lechner <david@lechnology.com> [noralf: fixed: Alignment should match open parenthesis] Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170816092306.10969-1-colin.king@canonical.com
-
Noralf Trønnes authored
Add myself as drivers/gpu/drm/tinydrm maintainer. Signed-off-by:
-
Noralf Trønnes authored
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-21-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now, use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
-
Noralf Trønnes authored
Use the new drm_gem_framebuffer_helper who's code was copied from this helper. Signed-off-by:
-
Noralf Trønnes authored
This library provides helpers for drivers that don't subclass drm_framebuffer and are backed by drm_gem_object. The code is taken from drm_fb_cma_helper. Signed-off-by:
-
Noralf Trønnes authored
There are no more users of drm_gem_cma_dumb_map_offset(), so remove it. Signed-off-by:
-
Noralf Trønnes authored
virtio_gpu_mode_dumb_destroy() is the same as drm_gem_dumb_destroy() which is the drm_driver.dumb_destroy default, so no need to set it. Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Use drm_gem_dumb_map_offset() in exynos_drm_gem_map_ioctl() and remove exynos_drm_gem_dumb_map_offset(). Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Marek Vasut <marex@denx.de> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Signed-off-by:
-
Dan Carpenter authored
If the kmalloc() fails then we dereference "state" when we set "state->zpos". Fixes: 3dfeb631 ("drm/omap: Rework the rotation-on-crtc hack") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
