- 08 Jun, 2022 19 commits
-
-
Mark Bloch authored
OFFLOADS paring using devcom is possible only on devices that support LAG. Filter based on lag capabilities. This fixes an issue where mlx5_get_next_phys_dev() was called without holding the interface lock. This issue was found when commit bc4c2f2e ("net/mlx5: Lag, filter non compatible devices") added an assert that verifies the interface lock is held. WARNING: CPU: 9 PID: 1706 at drivers/net/ethernet/mellanox/mlx5/core/dev.c:642 mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Modules linked in: mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core overlay fuse [last unloaded: mlx5_core] CPU: 9 PID: 1706 Comm: devlink Not tainted 5.18.0-rc7+ #11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_get_next_phys_dev+0xd2/0x100 [mlx5_core] Code: 02 00 75 48 48 8b 85 80 04 00 00 5d c3 31 c0 5d c3 be ff ff ff ff 48 c7 c7 08 41 5b a0 e8 36 87 28 e3 85 c0 0f 85 6f ff ff ff <0f> 0b e9 68 ff ff ff 48 c7 c7 0c 91 cc 84 e8 cb 36 6f e1 e9 4d ff RSP: 0018:ffff88811bf47458 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811b398000 RCX: 0000000000000001 RDX: 0000000080000000 RSI: ffffffffa05b4108 RDI: ffff88812daaaa78 RBP: ffff88812d050380 R08: 0000000000000001 R09: ffff88811d6b3437 R10: 0000000000000001 R11: 00000000fddd3581 R12: ffff88815238c000 R13: ffff88812d050380 R14: ffff8881018aa7e0 R15: ffff88811d6b3428 FS: 00007fc82e18ae80(0000) GS:ffff88842e080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9630d1b421 CR3: 0000000149802004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mlx5_esw_offloads_devcom_event+0x99/0x3b0 [mlx5_core] mlx5_devcom_send_event+0x167/0x1d0 [mlx5_core] esw_offloads_enable+0x1153/0x1500 [mlx5_core] ? mlx5_esw_offloads_controller_valid+0x170/0x170 [mlx5_core] ? wait_for_completion_io_timeout+0x20/0x20 ? mlx5_rescan_drivers_locked+0x318/0x810 [mlx5_core] mlx5_eswitch_enable_locked+0x586/0xc50 [mlx5_core] ? mlx5_eswitch_disable_pf_vf_vports+0x1d0/0x1d0 [mlx5_core] ? mlx5_esw_try_lock+0x1b/0xb0 [mlx5_core] ? mlx5_eswitch_enable+0x270/0x270 [mlx5_core] ? __debugfs_create_file+0x260/0x3e0 mlx5_devlink_eswitch_mode_set+0x27e/0x870 [mlx5_core] ? mutex_lock_io_nested+0x12c0/0x12c0 ? esw_offloads_disable+0x250/0x250 [mlx5_core] ? devlink_nl_cmd_trap_get_dumpit+0x470/0x470 ? rcu_read_lock_sched_held+0x3f/0x70 devlink_nl_cmd_eswitch_set_doit+0x217/0x620 Fixes: dd3fddb8 ("net/mlx5: E-Switch, handle devcom events only for ports on the same device") Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Paul Blakey authored
CT cleanup assumes that all tc rules were deleted first, and so is free to delete the CT shared resources (e.g the dr_action fwd_action which is shared for all tuples). But currently for uplink, this is happens in reverse, causing the below trace. CT cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_cleanup_uplink_rep_tx()-> mlx5e_rep_tc_cleanup()->mlx5e_tc_esw_cleanup()-> mlx5_tc_ct_clean() Only afterwards, tc cleanup is called from: mlx5e_cleanup_rep_tx()->mlx5e_tc_ht_cleanup() which would have deleted all the tc ct rules, and so delete all the offloaded tuples. Fix this reversing the order of init and on cleanup, which will result in tc cleanup then ct cleanup. [ 9443.593347] WARNING: CPU: 2 PID: 206774 at drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c:1882 mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593349] Modules linked in: act_ct nf_flow_table rdma_ucm(O) rdma_cm(O) iw_cm(O) ib_ipoib(O) ib_cm(O) ib_umad(O) mlx5_core(O-) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) psample ib_core(O) mlx_compat(O) ip_gre gre ip_tunnel act_vlan bonding geneve esp6_offload esp6 esp4_offload esp4 act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel act_mirred act_skbedit act_gact cls_flower sch_ingress nfnetlink_cttimeout nfnetlink xfrm_user xfrm_algo 8021q garp stp ipmi_devintf mrp ipmi_msghandler llc openvswitch nsh nf_conncount nf_nat mst_pciconf(O) dm_multipath sbsa_gwdt uio_pdrv_genirq uio mlxbf_pmc mlxbf_pka mlx_trio mlx_bootctl(O) bluefield_edac sch_fq_codel ip_tables ipv6 crc_ccitt btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq raid1 raid0 crct10dif_ce i2c_mlxbf gpio_mlxbf2 mlxbf_gige aes_neon_bs aes_neon_blk [last unloaded: mlx5_ib] [ 9443.593419] CPU: 2 PID: 206774 Comm: modprobe Tainted: G O 5.4.0-1023.24.gc14613d-bluefield #1 [ 9443.593422] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:143ebaf Jan 11 2022 [ 9443.593424] pstate: 20000005 (nzCv daif -PAN -UAO) [ 9443.593489] pc : mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593545] lr : mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593546] sp : ffff8000135dbab0 [ 9443.593548] x29: ffff8000135dbab0 x28: ffff0003a6ab8e80 [ 9443.593550] x27: 0000000000000000 x26: ffff0003e07d7000 [ 9443.593552] x25: ffff800009609de0 x24: ffff000397fb2120 [ 9443.593554] x23: ffff0003975c0000 x22: 0000000000000000 [ 9443.593556] x21: ffff0003975f08c0 x20: ffff800009609de0 [ 9443.593558] x19: ffff0003c8a13380 x18: 0000000000000014 [ 9443.593560] x17: 0000000067f5f125 x16: 000000006529c620 [ 9443.593561] x15: 000000000000000b x14: 0000000000000000 [ 9443.593563] x13: 0000000000000002 x12: 0000000000000001 [ 9443.593565] x11: ffff800011108868 x10: 0000000000000000 [ 9443.593567] x9 : 0000000000000000 x8 : ffff8000117fb270 [ 9443.593569] x7 : ffff0003ebc01288 x6 : 0000000000000000 [ 9443.593571] x5 : ffff800009591ab8 x4 : fffffe000f6d9a20 [ 9443.593572] x3 : 0000000080040001 x2 : fffffe000f6d9a20 [ 9443.593574] x1 : ffff8000095901d8 x0 : 0000000000000025 [ 9443.593577] Call trace: [ 9443.593634] mlx5dr_action_destroy+0x188/0x1a0 [mlx5_core] [ 9443.593688] mlx5_ct_fs_smfs_destroy+0x24/0x30 [mlx5_core] [ 9443.593743] mlx5_tc_ct_clean+0x34/0xa8 [mlx5_core] [ 9443.593797] mlx5e_tc_esw_cleanup+0x58/0x88 [mlx5_core] [ 9443.593851] mlx5e_rep_tc_cleanup+0x24/0x30 [mlx5_core] [ 9443.593905] mlx5e_cleanup_rep_tx+0x6c/0x78 [mlx5_core] [ 9443.593959] mlx5e_detach_netdev+0x74/0x98 [mlx5_core] [ 9443.594013] mlx5e_netdev_change_profile+0x70/0x180 [mlx5_core] [ 9443.594067] mlx5e_netdev_attach_nic_profile+0x34/0x40 [mlx5_core] [ 9443.594122] mlx5e_vport_rep_unload+0x15c/0x1a8 [mlx5_core] [ 9443.594177] mlx5_eswitch_unregister_vport_reps+0x228/0x298 [mlx5_core] [ 9443.594231] mlx5e_rep_remove+0x2c/0x38 [mlx5_core] [ 9443.594236] auxiliary_bus_remove+0x30/0x50 [auxiliary] [ 9443.594246] device_release_driver_internal+0x108/0x1d0 [ 9443.594248] driver_detach+0x5c/0xe8 [ 9443.594250] bus_remove_driver+0x64/0xd8 [ 9443.594253] driver_unregister+0x38/0x60 [ 9443.594255] auxiliary_driver_unregister+0x24/0x38 [auxiliary] [ 9443.594311] mlx5e_rep_cleanup+0x20/0x38 [mlx5_core] [ 9443.594365] mlx5e_cleanup+0x18/0x30 [mlx5_core] [ 9443.594419] cleanup+0xc/0x20cc [mlx5_core] [ 9443.594424] __arm64_sys_delete_module+0x154/0x2b0 [ 9443.594429] el0_svc_common.constprop.0+0xf4/0x200 [ 9443.594432] el0_svc_handler+0x38/0xa8 [ 9443.594435] el0_svc+0x10/0x26c Fixes: d1a3138f ("net/mlx5e: TC, Move flow hashtable to be per rep") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Reviewed-by:
Oz Shlomo <ozsh@nvidia.com> Signed-off-by:
-
Saeed Mahameed authored
FW is not ready, fix was sent too soon. This reverts commit f05ec8d9. Fixes: f05ec8d9 ("net/mlx5e: Allow relaxed ordering over VFs") Signed-off-by:
-
Lukas Bulwahn authored
Commit 40379a00 ("net/mlx5_fpga: Drop INNOVA TLS support") removes all files in the directory drivers/net/ethernet/mellanox/mlx5/core/accel/, but misses to adjust its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Remove the file entry to the removed directory in MELLANOX ETHERNET INNOVA DRIVERS. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The conversion to the dma-mapping API in linux-2.6.11 was incomplete and left a virt_to_bus() call around. There have been a number of fixes for DMA mapping API abuse in this driver, but this one always slipped through. Change it to just use the existing dma_addr_t pointer, and make it use the correct types throughout the driver to make it easier to understand the virtual vs dma address spaces. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Manuel Lauss <manuel.lauss@gmail.com> Link: https://lore.kernel.org/r/20220607090206.19830-1-arnd@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Wang Yufen authored
When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be overflow. To fix, we can follow what udpv6 does and subtract the transhdrlen from the max. Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Link: https://lore.kernel.org/r/20220607120028.845916-2-wangyufen@huawei.comSigned-off-by:
-
Wang Yufen authored
Resurrect ubsan overflow checks and ubsan report this warning, fix it by change the variable [length] type to size_t. UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19 2147479552 + 8567 cannot be represented in type 'int' CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x214/0x230 show_stack+0x30/0x78 dump_stack_lvl+0xf8/0x118 dump_stack+0x18/0x30 ubsan_epilogue+0x18/0x60 handle_overflow+0xd0/0xf0 __ubsan_handle_add_overflow+0x34/0x44 __ip6_append_data.isra.48+0x1598/0x1688 ip6_append_data+0x128/0x260 udpv6_sendmsg+0x680/0xdd0 inet6_sendmsg+0x54/0x90 sock_sendmsg+0x70/0x88 ____sys_sendmsg+0xe8/0x368 ___sys_sendmsg+0x98/0xe0 __sys_sendmmsg+0xf4/0x3b8 __arm64_sys_sendmmsg+0x34/0x48 invoke_syscall+0x64/0x160 el0_svc_common.constprop.4+0x124/0x300 do_el0_svc+0x44/0xc8 el0_svc+0x3c/0x1e8 el0t_64_sync_handler+0x88/0xb0 el0t_64_sync+0x16c/0x170 Changes since v1: -Change the variable [length] type to unsigned, as Eric Dumazet suggested. Changes since v2: -Don't change exthdrlen type in ip6_make_skb, as Paolo Abeni suggested. Changes since v3: -Don't change ulen type in udpv6_sendmsg and l2tp_ip6_sendmsg, as Jakub Kicinski suggested. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
-
Xiaohui Zhang authored
Similar to the handling of play_deferred in commit 19cfe912 ("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought a patch might be needed here as well. Currently usb_submit_urb is called directly to submit deferred tx urbs after unanchor them. So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb and cause memory leak. Put those urbs in tx_anchor to avoid the leak, and also fix the error handling. Signed-off-by:
Xiaohui Zhang <xiaohuizhang@ruc.edu.cn> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cnSigned-off-by:
-
Jakub Kicinski authored
Martin Faltesek says: ==================== Split "nfc: st21nfca: Refactor EVT_TRANSACTION" into 3 v2: https://lore.kernel.org/netdev/20220401180939.2025819-1-mfaltesek@google.com/ v1: https://lore.kernel.org/netdev/20220329175431.3175472-1-mfaltesek@google.com/ ==================== Link: https://lore.kernel.org/r/20220607025729.1673212-1-mfaltesek@google.comSigned-off-by:
-
Martin Faltesek authored
The transaction buffer is allocated by using the size of the packet buf, and subtracting two which seem intended to remove the two tags which are not present in the target structure. This calculation leads to under counting memory because of differences between the packet contents and the target structure. The aid_len field is a u8 in the packet, but a u32 in the structure, resulting in at least 3 bytes always being under counted. Further, the aid data is a variable length field in the packet, but fixed in the structure, so if this field is less than the max, the difference is added to the under counting. The last validation check for transaction->params_len is also incorrect since it employs the same accounting error. To fix, perform validation checks progressively to safely reach the next field, to determine the size of both buffers and verify both tags. Once all validation checks pass, allocate the buffer and copy the data. This eliminates freeing memory on the error path, as those checks are moved ahead of memory allocation. Fixes: 26fc6c7f ("NFC: st21nfca: Add HCI transaction event support") Fixes: 4fbcc1a4 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION") Cc: stable@vger.kernel.org Signed-off-by:
Martin Faltesek <mfaltesek@google.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Reviewed-by:
-
Martin Faltesek authored
Error paths do not free previously allocated memory. Add devm_kfree() to those failure paths. Fixes: 26fc6c7f ("NFC: st21nfca: Add HCI transaction event support") Fixes: 4fbcc1a4 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION") Cc: stable@vger.kernel.org Signed-off-by:
-
Martin Faltesek authored
The first validation check for EVT_TRANSACTION has two different checks tied together with logical AND. One is a check for minimum packet length, and the other is for a valid aid_tag. If either condition is true (fails), then an error should be triggered. The fix is to change && to ||. Fixes: 26fc6c7f ("NFC: st21nfca: Add HCI transaction event support") Cc: stable@vger.kernel.org Signed-off-by:
-
Jakub Kicinski authored
Masahiro Yamada says: ==================== net: unexport some symbols that are annotated __init This patch set fixes odd combinations of EXPORT_SYMBOL and __init. Checking this in modpost is a good thing and I really wanted to do it, but Linus Torvalds imposes a very strict rule, "No new warning". I'd like the maintainer to kindly pick this up and send a fixes pull request. Unless I eliminate all the sites of warnings beforehand, Linus refuses to re-enable the modpost check. [1] [1]: https://lore.kernel.org/linux-kbuild/CAK7LNATmd0bigp7HQ4fTzHw5ugZMkSb3UXG7L4fxpGbqkRKESA@mail.gmail.com/T/#m5e50cc2da17491ba210c72b5efdbc0ce76e0217f ==================== Link: https://lore.kernel.org/r/20220606045355.4160711-1-masahiroy@kernel.orgSigned-off-by:
-
Masahiro Yamada authored
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the caller (net/ipv6/seg6.c) and the callee (net/ipv6/seg6_hmac.c) belong to the same module. It seems an internal function call in ipv6.ko. Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, net/ipv4/xfrm4_policy.c is never compiled as modular. (CONFIG_XFRM is boolean) Fixes: 2f32b51b ("xfrm: Introduce xfrm_input_afinfo to access the the callbacks properly") Reported-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Masahiro Yamada authored
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean) Fixes: 90eff909 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Gal Pressman authored
The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: 7202da8b ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220606115718.14233-1-tariqt@nvidia.comSigned-off-by:
-
Miaoqian Lin authored
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. when breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the gphy_fw_np. Add missing of_node_put() to avoid refcount leak. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220605072335.11257-1-linmq006@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix NAT support for NFPROTO_INET without layer 3 address, from Florian Westphal. 2) Use kfree_rcu(ptr, rcu) variant in nf_tables clean_net path. 3) Use list to collect flowtable hooks to be deleted. 4) Initialize list of hook field in flowtable transaction. 5) Release hooks on error for flowtable updates. 6) Memleak in hardware offload rule commit and abort paths. 7) Early bail out in case device does not support for hardware offload. This adds a new interface to net/core/flow_offload.c to check if the flow indirect block list is empty. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: bail out early if hardware offload is not supported netfilter: nf_tables: memleak flow rule from commit path netfilter: nf_tables: release new hooks on unsupported flowtable flags netfilter: nf_tables: always initialize flowtable hook list in transaction netfilter: nf_tables: delete flowtable hooks via transaction list netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path netfilter: nat: really support inet nat without l3 address ==================== Link: https://lore.kernel.org/r/20220606212055.98300-1-pablo@netfilter.orgSigned-off-by:
-
- 07 Jun, 2022 3 commits
-
-
Lina Wang authored
bpf_helpers.h has been moved to tools/lib/bpf since 5.10, so add more including path. Fixes: edae34a3 ("selftests net: add UDP GRO fraglist + bpf self-tests") Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
Lina Wang <lina.wang@mediatek.com> Acked-by:
Song Liu <songliubraving@fb.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220606064517.8175-1-lina.wang@mediatek.comSigned-off-by:
-
Kuniyuki Iwashima authored
unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s lock held and check if its receive queue is full. Here we need to use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise KCSAN will report a data-race. Fixes: 7d267278 ("unix: avoid use-after-free in ep_remove_wait_queue") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20220605232325.11804-1-kuniyu@amazon.comSigned-off-by:
-
Christophe JAILLET authored
When the managed API is used, there is no need to explicitly call pci_free_irq_vectors(). This looks to be a left-over from the commit in the Fixes tag. Only the .remove() function had been updated. So remove this unused function call and update goto label accordingly. Fixes: 8accc467 ("stmmac: intel: use managed PCI function on probe and resume") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
- 06 Jun, 2022 9 commits
-
-
Miaoqian Lin authored
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 55954f3b ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220603133238.44114-1-linmq006@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Taehee Yoo says: ==================== amt: fix several bugs in amt_rcv() This series fixes bugs in amt_rcv(). First patch fixes pskb_may_pull() issue. Some functions missed to call pskb_may_pull() and uses wrong parameter of pskb_may_pull(). Second patch fixes possible null-ptr-deref in amt_rcv(). If there is no amt private data in sock, skb will be freed. And it increases stats. But in order to increase stats, amt private data is needed. So, uninitialised pointer will be used at that point. Third patch fixes wrong definition of type_str[] in amt.c ==================== Link: https://lore.kernel.org/r/20220602140108.18329-1-ap420073@gmail.comSigned-off-by:
-
Taehee Yoo authored
amt message type definition starts from 1, not 0. But type_str[] starts from 0. So, it prints wrong type information. Fixes: cbc21dc1 ("amt: add data plane of amt interface") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
When amt interface receives amt message, it tries to obtain amt private data from sock. If there is no amt private data, it frees an skb immediately. After kfree_skb(), it increases the rx_dropped stats. But in order to use rx_dropped, amt private data is needed. So, it makes amt_rcv() to do not increase rx_dropped stats when it can not obtain amt private data. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1a1a0e80 ("amt: fix possible memory leak in amt_rcv()") Signed-off-by:
-
Taehee Yoo authored
It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by:
-
Pablo Neira Ayuso authored
If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device provides the .ndo_setup_tc interface or there is an indirect flow block that has been registered. Otherwise, bail out early from the preparation phase. Moreover, validate that family == NFPROTO_NETDEV and hook is NF_NETDEV_INGRESS. Fixes: c9626a2c ("netfilter: nf_tables: add hardware offload support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Tan Tee Min authored
There is a limitation in TI DP83867 PHY device where SGMII AN is only triggered once after the device is booted up. Even after the PHY TPI is down and up again, SGMII AN is not triggered and hence no new in-band message from PHY to MAC side SGMII. This could cause an issue during power up, when PHY is up prior to MAC. At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t receive new in-band message from TI PHY with correct link status, speed and duplex info. As suggested by TI, implemented a SW solution here to retrigger SGMII Auto-Neg whenever there is a link change. v2: Add Fixes tag in commit message. Fixes: 2a10154a ("net: phy: dp83867: Add TI dp83867 phy") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by:
Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by:
Voon Weifeng <weifeng.voon@intel.com> Signed-off-by:
Tan Tee Min <tee.min.tan@linux.intel.com> Reviewed-by:
-
Pablo Neira Ayuso authored
Abort path release flow rule object, however, commit path does not. Update code to destroy these objects before releasing the transaction. Fixes: c9626a2c ("netfilter: nf_tables: add hardware offload support") Signed-off-by:
-
Pablo Neira Ayuso authored
Release the list of new hooks that are pending to be registered in case that unsupported flowtable flags are provided. Fixes: 78d9f48f ("netfilter: nf_tables: add devices to existing flowtable") Signed-off-by:
-
- 02 Jun, 2022 9 commits
-
-
Pablo Neira Ayuso authored
The hook list is used if nft_trans_flowtable_update(trans) == true. However, initialize this list for other cases for safety reasons. Fixes: 78d9f48f ("netfilter: nf_tables: add devices to existing flowtable") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - new code bugs: - af_packet: make sure to pull the MAC header, avoid skb panic in GSO - ptp_clockmatrix: fix inverted logic in is_single_shot() - netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag - dt-bindings: net: adin: fix adi,phy-output-clock description syntax - wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning Previous releases - regressions: - Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process" - tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd - nf_tables: disallow non-stateful expression in sets earlier - nft_limit: clone packet limits' cost value - nf_tables: double hook unregistration in netns path - ping6: fix ping -6 with interface name Previous releases - always broken: - sched: fix memory barriers to prevent skbs from getting stuck in lockless qdiscs - neigh: set lower cap for neigh_managed_work rearming, avoid constantly scheduling the probe work - bpf: fix probe read error on big endian in ___bpf_prog_run() - amt: memory leak and error handling fixes Misc: - ipv6: expand & rename accept_unsolicited_na to accept_untracked_na" * tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) net/af_packet: make sure to pull mac header net: add debug info to __skb_pull() net: CONFIG_DEBUG_NET depends on CONFIG_NET stmmac: intel: Add RPL-P PCI ID net: stmmac: use dev_err_probe() for reporting mdio bus registration failure tipc: check attribute length for bearer name ice: fix access-beyond-end in the switch code nfp: remove padding in nfp_nfdk_tx_desc ax25: Fix ax25 session cleanup problems net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels sfc/siena: fix considering that all channels have TX queues socket: Don't use u8 type in uapi socket.h net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6() net: ping6: Fix ping -6 with interface name macsec: fix UAF bug for real_dev octeontx2-af: fix error code in is_valid_offset() wifi: mac80211: fix use-after-free in chanctx code bonding: guard ns_targets by CONFIG_IPV6 tcp: tcp_rtx_synack() can be called from process context ... -
Saravana Kannan authored
Commit cfc1d277 ("module: Move all into module/") changed the prefix of the module param by moving/renaming files. A later commit also moves the module_param() into a different file, thereby changing the prefix yet again. This would break kernel cmdline compatibility and also userspace compatibility at /sys/module/module/parameters/sig_enforce. So, set the prefix back to "module.". Fixes: cfc1d277 ("module: Move all into module/") Link: https://lore.kernel.org/lkml/20220602034111.4163292-1-saravanak@google.com/ Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Aaron Tomlin <atomlin@redhat.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fixes from Bjorn Helgaas: - Revert brcmstb patches that broke booting on Raspberry Pi Compute Module 4 (Bjorn Helgaas) - Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte X299 entry instead of adding a new one (Bjorn Helgaas) - Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo Pieralisi) * tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Lorenzo Pieralisi's email address PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299 Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs" Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators" Revert "PCI: brcmstb: Add control of subdevice voltage regulators" Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: af_packet: be careful when expanding mac header size A recent regression in af_packet needed a preliminary debug patch, which will presumably be useful for next bugs hunting. The af_packet fix is to make sure MAC headers are contained in skb linear part, as GSO stack requests. v2: CONFIG_DEBUG_NET depends on CONFIG_NET to avoid compile errors found by kernel bots. ==================== Link: https://lore.kernel.org/r/20220602161859.2546399-1-eric.dumazet@gmail.comSigned-off-by:
-
Eric Dumazet authored
GSO assumes skb->head contains link layer headers. tun device in some case can provide base 14 bytes, regardless of VLAN being used or not. After blamed commit, we can end up setting a network header offset of 18+, we better pull the missing bytes to avoid a posible crash in GSO. syzbot report was: kernel BUG at include/linux/skbuff.h:2699! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3601 Comm: syz-executor210 Not tainted 5.18.0-syzkaller-11338-g2c5ca23f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__skb_pull include/linux/skbuff.h:2699 [inline] RIP: 0010:skb_mac_gso_segment+0x48f/0x530 net/core/gro.c:136 Code: 00 48 c7 c7 00 96 d4 8a c6 05 cb d3 45 06 01 e8 26 bb d0 01 e9 2f fd ff ff 49 c7 c4 ea ff ff ff e9 f1 fe ff ff e8 91 84 19 fa <0f> 0b 48 89 df e8 97 44 66 fa e9 7f fd ff ff e8 ad 44 66 fa e9 48 RSP: 0018:ffffc90002e2f4b8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000000000 RDX: ffff88805bb58000 RSI: ffffffff8760ed0f RDI: 0000000000000004 RBP: 0000000000005dbc R08: 0000000000000004 R09: 0000000000000fe0 R10: 0000000000000fe4 R11: 0000000000000000 R12: 0000000000000fe0 R13: ffff88807194d780 R14: 1ffff920005c5e9b R15: 0000000000000012 FS: 000055555730f300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200015c0 CR3: 0000000071ff8000 CR4: 0000000000350ee0 Call Trace: <TASK> __skb_gso_segment+0x327/0x6e0 net/core/dev.c:3411 skb_gso_segment include/linux/netdevice.h:4749 [inline] validate_xmit_skb+0x6bc/0xf10 net/core/dev.c:3669 validate_xmit_skb_list+0xbc/0x120 net/core/dev.c:3719 sch_direct_xmit+0x3d1/0xbe0 net/sched/sch_generic.c:327 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3a00 net/core/dev.c:4219 packet_snd net/packet/af_packet.c:3071 [inline] packet_sendmsg+0x21cb/0x5550 net/packet/af_packet.c:3102 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f4b95da06c9 Code: 28 c3 e8 4a 15 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd7defc4c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffd7defc4f0 RCX: 00007f4b95da06c9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 0000000000000003 R08: bb1414ac00000050 R09: bb1414ac00000050 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd7defc4e0 R14: 00007ffd7defc4d8 R15: 00007ffd7defc4d4 </TASK> Fixes: dfed913e ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Eric Dumazet authored
While analyzing yet another syzbot report, I found the following patch very useful. It allows to better understand what went wrong. This debug info is only enabled if CONFIG_DEBUG_NET=y, which is the case for syzbot builds. Signed-off-by:
-
Eric Dumazet authored
It makes little sense to debug networking stacks if networking is not compiled in. Signed-off-by:
-
Michael Sit Wei Hong authored
Add PCI ID for Ethernet TSN Controller on RPL-P. Signed-off-by:
-
