- 25 Jul, 2020 6 commits
-
-
Don Brace authored
The controller can become slow to respond to SCSI INQUIRY requests resulting in the SCSI midlayer offlining the controller device. Increase the timeout value for commands sent to the controller device. Link: https://lore.kernel.org/r/159528198335.24772.7963614374905470122.stgit@brunhildaReviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
Increase queue_depth for PTRAID devices to improve performance. Link: https://lore.kernel.org/r/159528197765.24772.15623281371636788406.stgit@brunhildaReviewed-by:
-
Don Brace authored
There are some rare conditions where a spare is first in the device list causing an array out-of-bounds condition. Link: https://lore.kernel.org/r/159528197176.24772.14659026352708896249.stgit@brunhildaReviewed-by:
-
Randy Dunlap authored
Drop the repeated word "the" in a comment. Link: https://lore.kernel.org/r/20200719003232.21301-1-rdunlap@infradead.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Xiongfeng Wang authored
Add newline when formatting SAS transport class phy 'enable' attribute. [root@localhost ~]# cat /sys/devices/pci0000:00/0000:00:0d.0/0000:0f:00.0/host3/phy-3:2/sas_phy/phy-3:2/enable 1[root@localhost ~]# Link: https://lore.kernel.org/r/1594975472-12486-1-git-send-email-wangxiongfeng2@huawei.comReviewed-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Bart van Assche <bvanassche@acm.org> Signed-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
-
Johannes Thumshirn authored
Don't clamp the maximum number of zone append sectors to the maximum number of hardware sectors in sd as the block layer is already enforcing this limit when setting max_zone_append_sectors. Link: https://lore.kernel.org/r/20200716091606.38316-1-johannes.thumshirn@wdc.comReviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
- 15 Jul, 2020 34 commits
-
-
Lee Jones authored
'amount_xferred' is used, but only in certain circumstances. Place the same stipulations on the defining/allocating of 'amount_xferred' as is placed when using it. We've been careful not to change any of the ordering semantics here. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_done’: drivers/scsi/aic7xxx/aic79xx_osm.c:1796:12: warning: variable ‘amount_xferred’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713080001.128044-24-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
It looks like they have never actually been used. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_dev_reset’: drivers/scsi/aic7xxx/aic79xx_osm.c:782:9: warning: variable ‘wait’ set but not used [-Wunused-but-set-variable] drivers/scsi/aic7xxx/aic79xx_osm.c:781:9: warning: variable ‘paused’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713080001.128044-23-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Lee Jones authored
Hasn't been used since 2005. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_slave_configure’: drivers/scsi/aic7xxx/aic79xx_osm.c:703:20: warning: variable ‘ahd’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713080001.128044-22-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Lee Jones authored
Either due to API slippage before the driver was mainlined or copy/paste errors. Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Function parameter or member 'qsize' not described in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:311: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_delete_queue' drivers/scsi/lpfc/lpfc_nvme.c:311: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_delete_queue' drivers/scsi/lpfc/lpfc_nvme.c:689: warning: Function parameter or member 'gen_req_cmp' not described in '__lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_ls_abort' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'phba' not described in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'pwqeIn' not described in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'wcqe' not described in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_io_cmd_wqe_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'pnode' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'cstat' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'hw_queue_handle' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'hw_queue_handle' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1598: warning: bad line: indicated in @lpfc_nvme_rport. drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1856: warning: Function parameter or member 'abts_cmpl' not described in 'lpfc_nvme_abort_fcreq_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1856: warning: Excess function parameter 'rspiocb' description in 'lpfc_nvme_abort_fcreq_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'idx' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'expedite' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2197: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_create_localport' drivers/scsi/lpfc/lpfc_nvme.c:2330: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_destroy_localport' drivers/scsi/lpfc/lpfc_nvme.c:2330: warning: Excess function parameter 'pnvme' description in 'lpfc_nvme_destroy_localport' drivers/scsi/lpfc/lpfc_nvme.c:2543: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_rescan_port' drivers/scsi/lpfc/lpfc_nvme.c:2543: warning: Function parameter or member 'ndlp' not described in 'lpfc_nvme_rescan_port' Link: https://lore.kernel.org/r/20200713080001.128044-21-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
Lee Jones authored
Also promote fully documented function header to kerneldoc. Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_mgmt.c:112: warning: Function parameter or member 'phba' not described in 'mgmt_open_connection' Link: https://lore.kernel.org/r/20200713080001.128044-20-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by:
-
Lee Jones authored
Also demote unintentional kerneldoc header. Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_main.c:986: warning: Function parameter or member 'pcontext' not described in 'alloc_wrb_handle' drivers/scsi/be2iscsi/be_main.c:986: warning: Excess function parameter 'pwrb_context' description in 'alloc_wrb_handle' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'beiscsi_conn' not described in 'beiscsi_complete_pdu' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'phdr' not described in 'beiscsi_complete_pdu' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'pdata' not described in 'beiscsi_complete_pdu' drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'dlen' not described in 'beiscsi_complete_pdu' Link: https://lore.kernel.org/r/20200713080001.128044-19-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by:
-
Lee Jones authored
And add descriptions for a couple of missing function parameters. Fixes the following W=1 kernel build warning(s): drivers/scsi/be2iscsi/be_iscsi.c:38: warning: Function parameter or member 'ep' not described in 'beiscsi_session_create' drivers/scsi/be2iscsi/be_iscsi.c:173: warning: Function parameter or member 'is_leading' not described in 'beiscsi_conn_bind' drivers/scsi/be2iscsi/be_iscsi.c:998: warning: Function parameter or member 'beiscsi_ep' not described in 'beiscsi_free_ep' drivers/scsi/be2iscsi/be_iscsi.c:998: warning: Excess function parameter 'ep' description in 'beiscsi_free_ep' drivers/scsi/be2iscsi/be_iscsi.c:1039: warning: Function parameter or member 'non_blocking' not described in 'beiscsi_open_conn' drivers/scsi/be2iscsi/be_iscsi.c:1135: warning: Function parameter or member 'shost' not described in 'beiscsi_ep_connect' drivers/scsi/be2iscsi/be_iscsi.c:1135: warning: Excess function parameter 'scsi_host' description in 'beiscsi_ep_connect' drivers/scsi/be2iscsi/be_iscsi.c:1236: warning: Function parameter or member 'beiscsi_ep' not described in 'beiscsi_conn_close' drivers/scsi/be2iscsi/be_iscsi.c:1236: warning: Excess function parameter 'ep' description in 'beiscsi_conn_close' Link: https://lore.kernel.org/r/20200713080001.128044-18-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by:
-
Lee Jones authored
No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/scsi/myrs.c:94: warning: Function parameter or member 'cmd_blk' not described in 'myrs_reset_cmd' drivers/scsi/myrs.c:105: warning: Function parameter or member 'cs' not described in 'myrs_qcmd' drivers/scsi/myrs.c:105: warning: Function parameter or member 'cmd_blk' not described in 'myrs_qcmd' drivers/scsi/myrs.c:130: warning: Function parameter or member 'cs' not described in 'myrs_exec_cmd' drivers/scsi/myrs.c:130: warning: Function parameter or member 'cmd_blk' not described in 'myrs_exec_cmd' drivers/scsi/myrs.c:149: warning: Function parameter or member 'cs' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'ldev_num' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'msg' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'blocks' not described in 'myrs_report_progress' drivers/scsi/myrs.c:149: warning: Function parameter or member 'size' not described in 'myrs_report_progress' drivers/scsi/myrs.c:160: warning: Function parameter or member 'cs' not described in 'myrs_get_ctlr_info' drivers/scsi/myrs.c:222: warning: Function parameter or member 'cs' not described in 'myrs_get_ldev_info' drivers/scsi/myrs.c:222: warning: Function parameter or member 'ldev_num' not described in 'myrs_get_ldev_info' drivers/scsi/myrs.c:222: warning: Function parameter or member 'ldev_info' not described in 'myrs_get_ldev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'cs' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'channel' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'target' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'lun' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:310: warning: Function parameter or member 'pdev_info' not described in 'myrs_get_pdev_info' drivers/scsi/myrs.c:353: warning: Function parameter or member 'cs' not described in 'myrs_dev_op' drivers/scsi/myrs.c:353: warning: Function parameter or member 'opcode' not described in 'myrs_dev_op' drivers/scsi/myrs.c:353: warning: Function parameter or member 'opdev' not described in 'myrs_dev_op' drivers/scsi/myrs.c:379: warning: Function parameter or member 'cs' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'channel' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'target' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'lun' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:379: warning: Function parameter or member 'devmap' not described in 'myrs_translate_pdev' drivers/scsi/myrs.c:422: warning: Function parameter or member 'cs' not described in 'myrs_get_event' drivers/scsi/myrs.c:422: warning: Function parameter or member 'event_num' not described in 'myrs_get_event' drivers/scsi/myrs.c:422: warning: Function parameter or member 'event_buf' not described in 'myrs_get_event' drivers/scsi/myrs.c:484: warning: Function parameter or member 'cs' not described in 'myrs_enable_mmio_mbox' drivers/scsi/myrs.c:484: warning: Function parameter or member 'enable_mbox_fn' not described in 'myrs_enable_mmio_mbox' drivers/scsi/myrs.c:584: warning: Function parameter or member 'cs' not described in 'myrs_get_config' drivers/scsi/myrs.c:688: warning: cannot understand function prototype: 'struct ' drivers/scsi/myrs.c:1967: warning: Function parameter or member 'dev' not described in 'myrs_is_raid' drivers/scsi/myrs.c:1980: warning: Function parameter or member 'dev' not described in 'myrs_get_resync' drivers/scsi/myrs.c:2005: warning: Function parameter or member 'dev' not described in 'myrs_get_state' drivers/scsi/myrs.c:2343: warning: bad line: the Error Status Register when the driver performs the BIOS handshaking. drivers/scsi/myrs.c:2344: warning: bad line: It returns true for fatal errors and false otherwise. drivers/scsi/myrs.c:2349: warning: Function parameter or member 'cs' not described in 'myrs_err_status' drivers/scsi/myrs.c:2349: warning: Function parameter or member 'status' not described in 'myrs_err_status' drivers/scsi/myrs.c:2349: warning: Function parameter or member 'parm0' not described in 'myrs_err_status' drivers/scsi/myrs.c:2349: warning: Function parameter or member 'parm1' not described in 'myrs_err_status' Link: https://lore.kernel.org/r/20200713080001.128044-16-lee.jones@linaro.org Cc: Hannes Reinecke <hare@kernel.org> Cc: Linux GmbH <hare@suse.com> Cc: "Leonard N. Zubkoff" <lnz@dandelion.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/ipr.h:1687:1: warning: alignment 1 of ‘struct ipr_dump_location_entry’ is less than 4 [-Wpacked-not-aligned] 1687 | }__attribute__((packed)); | ^ drivers/scsi/ipr.h:1711:1: warning: alignment 1 of ‘struct ipr_driver_dump’ is less than 4 [-Wpacked-not-aligned] 1711 | }__attribute__((packed)); | ^ Link: https://lore.kernel.org/r/20200713080001.128044-15-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/scsi/ipr.c:73: drivers/scsi/ipr.c: In function ‘ipr_mask_and_clear_interrupts’: drivers/scsi/ipr.c:740:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_cancel_op’: drivers/scsi/ipr.c:5497:13: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_iopoll’: drivers/scsi/ipr.c:5765:22: warning: variable ‘ioa_cfg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_reset_restore_cfg_space’: drivers/scsi/ipr.c:8662:6: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c: In function ‘ipr_test_msi’: Link: https://lore.kernel.org/r/20200713080001.128044-14-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Signed-off-by:
-
Lee Jones authored
This is the only use of kerneldoc in the sourcefile and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/scsi/virtio_scsi.c:109: warning: Function parameter or member 'vscsi' not described in 'virtscsi_complete_cmd' drivers/scsi/virtio_scsi.c:109: warning: Function parameter or member 'buf' not described in 'virtscsi_complete_cmd' Link: https://lore.kernel.org/r/20200713080001.128044-13-lee.jones@linaro.org Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: virtualization@lists.linux-foundation.org Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Lee Jones authored
Mainly misspellings and/or missing function parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/ipr.c:10100:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable] drivers/scsi/ipr.c:679: warning: Function parameter or member 'fast_done' not described in 'ipr_init_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Function parameter or member 'hrrq' not described in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:697: warning: Excess function parameter 'ioa_cfg' description in '__ipr_get_free_ipr_cmnd' drivers/scsi/ipr.c:1297: warning: Function parameter or member 'buffer' not described in '__ipr_format_res_path' drivers/scsi/ipr.c:1297: warning: Excess function parameter 'buf' description in '__ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Function parameter or member 'buffer' not described in 'ipr_format_res_path' drivers/scsi/ipr.c:1321: warning: Excess function parameter 'buf' description in 'ipr_format_res_path' drivers/scsi/ipr.c:1400: warning: Excess function parameter 'cfgtew' description in 'ipr_clear_res_target' drivers/scsi/ipr.c:2679: warning: Function parameter or member 't' not described in 'ipr_timeout' drivers/scsi/ipr.c:2679: warning: Excess function parameter 'ipr_cmd' description in 'ipr_timeout' drivers/scsi/ipr.c:2712: warning: Function parameter or member 't' not described in 'ipr_oper_timeout' drivers/scsi/ipr.c:2712: warning: Excess function parameter 'ipr_cmd' description in 'ipr_oper_timeout' drivers/scsi/ipr.c:3494: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_version' drivers/scsi/ipr.c:3528: warning: Function parameter or member 'attr' not described in 'ipr_show_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'attr' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3551: warning: Function parameter or member 'count' not described in 'ipr_store_log_level' drivers/scsi/ipr.c:3586: warning: Function parameter or member 'attr' not described in 'ipr_store_diagnostics' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'dev' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Function parameter or member 'attr' not described in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3642: warning: Excess function parameter 'class_dev' description in 'ipr_show_adapter_state' drivers/scsi/ipr.c:3671: warning: Function parameter or member 'attr' not described in 'ipr_store_adapter_state' drivers/scsi/ipr.c:3722: warning: Function parameter or member 'attr' not described in 'ipr_store_reset_adapter' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'attr' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3783: warning: Function parameter or member 'count' not described in 'ipr_store_iopoll_weight' drivers/scsi/ipr.c:3883: warning: Function parameter or member 'sglist' not described in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:3883: warning: Excess function parameter 'p_dnld' description in 'ipr_free_ucode_buffer' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'dev' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Function parameter or member 'attr' not described in 'ipr_store_update_fw' drivers/scsi/ipr.c:4074: warning: Excess function parameter 'class_dev' description in 'ipr_store_update_fw' drivers/scsi/ipr.c:4149: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_type' drivers/scsi/ipr.c:4489: warning: Excess function parameter 'reason' description in 'ipr_change_queue_depth' drivers/scsi/ipr.c:4660: warning: Function parameter or member 'attr' not described in 'ipr_show_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'attr' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:4688: warning: Function parameter or member 'count' not described in 'ipr_store_raw_mode' drivers/scsi/ipr.c:5069: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_cmnd_is_free' drivers/scsi/ipr.c:5108: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5108: warning: Excess function parameter 'ipr_cmd' description in 'ipr_wait_for_ops' drivers/scsi/ipr.c:5272: warning: Function parameter or member 'deadline' not described in 'ipr_sata_reset' drivers/scsi/ipr.c:5453: warning: Function parameter or member 't' not described in 'ipr_abort_timeout' drivers/scsi/ipr.c:5453: warning: Excess function parameter 'ipr_cmd' description in 'ipr_abort_timeout' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'shost' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Function parameter or member 'elapsed_time' not described in 'ipr_scan_finished' drivers/scsi/ipr.c:5578: warning: Excess function parameter 'scsi_cmd' description in 'ipr_scan_finished' drivers/scsi/ipr.c:5704: warning: Function parameter or member 'number' not described in 'ipr_isr_eh' drivers/scsi/ipr.c:6278: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'ioasa' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6278: warning: Excess function parameter 'sense_buf' description in 'ipr_gen_sense' drivers/scsi/ipr.c:6711: warning: Function parameter or member 'host' not described in 'ipr_ioa_info' drivers/scsi/ipr.c:6711: warning: Excess function parameter 'scsi_host' description in 'ipr_ioa_info' drivers/scsi/ipr.c:7606: warning: Function parameter or member 'res_handle' not described in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7606: warning: Excess function parameter 'res' description in 'ipr_build_mode_sense' drivers/scsi/ipr.c:7947: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_ioafp_set_caching_parameters' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'flags' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'page' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'dma_addr' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:7986: warning: Function parameter or member 'xfer_len' not described in 'ipr_ioafp_inquiry' drivers/scsi/ipr.c:8280: warning: Function parameter or member 't' not described in 'ipr_reset_timer_done' drivers/scsi/ipr.c:8280: warning: Excess function parameter 'ipr_cmd' description in 'ipr_reset_timer_done' drivers/scsi/ipr.c:9486: warning: bad line: drivers/scsi/ipr.c:9609: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_free_all_resources' drivers/scsi/ipr.c:9609: warning: Excess function parameter 'ipr_cmd' description in 'ipr_free_all_resources' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'irq' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Function parameter or member 'devp' not described in 'ipr_test_intr' drivers/scsi/ipr.c:10071: warning: Excess function parameter 'pdev' description in 'ipr_test_intr' drivers/scsi/ipr.c:10098: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_test_msi' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'pdev' not described in 'ipr_probe' drivers/scsi/ipr.c:10538: warning: Function parameter or member 'dev_id' not described in 'ipr_probe' drivers/scsi/ipr.c:10794: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_halt_done' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'nb' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'event' not described in 'ipr_halt' drivers/scsi/ipr.c:10805: warning: Function parameter or member 'buf' not described in 'ipr_halt' Link: https://lore.kernel.org/r/20200713080001.128044-12-lee.jones@linaro.org Cc: Brian King <brking@us.ibm.com> Signed-off-by:
-
Lee Jones authored
... even if they are completely unused. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_ctl.c:56: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_mpi_interface_rev_show' drivers/scsi/pm8001/pm8001_ctl.c:81: warning: Function parameter or member 'attr' not described in 'controller_fatal_error_show' drivers/scsi/pm8001/pm8001_ctl.c:100: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fw_version_show' drivers/scsi/pm8001/pm8001_ctl.c:130: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ila_version_show' drivers/scsi/pm8001/pm8001_ctl.c:155: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_inactive_fw_version_show' drivers/scsi/pm8001/pm8001_ctl.c:181: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_out_io_show' drivers/scsi/pm8001/pm8001_ctl.c:204: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_devices_show' drivers/scsi/pm8001/pm8001_ctl.c:230: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_sg_list_show' drivers/scsi/pm8001/pm8001_ctl.c:274: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_sas_spec_support_show' drivers/scsi/pm8001/pm8001_ctl.c:303: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_host_sas_address_show' drivers/scsi/pm8001/pm8001_ctl.c:322: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_logging_level_show' drivers/scsi/pm8001/pm8001_ctl.c:355: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_aap_log_show' drivers/scsi/pm8001/pm8001_ctl.c:390: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ib_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:423: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ob_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:454: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_bios_version_show' drivers/scsi/pm8001/pm8001_ctl.c:492: warning: Function parameter or member 'attr' not described in 'event_log_size_show' drivers/scsi/pm8001/pm8001_ctl.c:510: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_iop_log_show' drivers/scsi/pm8001/pm8001_ctl.c:548: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fatal_log_show' drivers/scsi/pm8001/pm8001_ctl.c:566: warning: Function parameter or member 'attr' not described in 'non_fatal_log_show' drivers/scsi/pm8001/pm8001_ctl.c:609: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_gsm_log_show' Link: https://lore.kernel.org/r/20200713080001.128044-11-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Lee Jones authored
... and document aac_rx_ioremap() 'dev' param. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p5' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p6' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'status' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r1' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r2' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r3' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r4' not described in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:156: warning: Excess function parameter 'ret' description in 'rx_sync_cmd' drivers/scsi/aacraid/rx.c:450: warning: Function parameter or member 'dev' not described in 'aac_rx_ioremap' Link: https://lore.kernel.org/r/20200713080001.128044-10-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
Lee Jones authored
Kerneldoc format should be '@.*: ', else the checker gets confused. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_scb.c:137: warning: Function parameter or member 'phy' not described in 'asd_get_attached_sas_addr' drivers/scsi/aic94xx/aic94xx_scb.c:137: warning: Function parameter or member 'sas_addr' not described in 'asd_get_attached_sas_addr' drivers/scsi/aic94xx/aic94xx_scb.c:860: warning: Function parameter or member 't' not described in 'asd_ascb_timedout' drivers/scsi/aic94xx/aic94xx_scb.c:860: warning: Excess function parameter 'data' description in 'asd_ascb_timedout' Link: https://lore.kernel.org/r/20200713080001.128044-9-lee.jones@linaro.org Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by:
-
Lee Jones authored
Some parameters not documented. Others misspelled. Also, functions must follow directly after the header that documents them. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commsup.c:223: warning: Function parameter or member 'scmd' not described in 'aac_fib_alloc_tag' drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'qid' not described in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'hw_fib' not described in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'priority' description in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'fib' description in 'aac_queue_get' drivers/scsi/aacraid/commsup.c:943: warning: Function parameter or member 'fibptr' not described in 'aac_fib_complete' drivers/scsi/aacraid/commsup.c:943: warning: Excess function parameter 'fib' description in 'aac_fib_complete' drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'dev' description in 'AIF_SNIFF_TIMEOUT' drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'fibptr' description in 'AIF_SNIFF_TIMEOUT' drivers/scsi/aacraid/commsup.c:2428: warning: Function parameter or member 'data' not described in 'aac_command_thread' drivers/scsi/aacraid/commsup.c:2428: warning: Excess function parameter 'dev' description in 'aac_command_thread' Link: https://lore.kernel.org/r/20200713080001.128044-8-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_seq.c:587: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_mip' drivers/scsi/aic94xx/aic94xx_seq.c:674: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_mdp' drivers/scsi/aic94xx/aic94xx_seq.c:958: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_cio' drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Function parameter or member 'asd_ha' not described in 'asd_update_port_links' drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Function parameter or member 'phy' not described in 'asd_update_port_links' drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Excess function parameter 'sas_phy' description in 'asd_update_port_links' Link: https://lore.kernel.org/r/20200713080001.128044-7-lee.jones@linaro.org Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by:
-
Lee Jones authored
This should be populated by someone who knows the meaning of all the params. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isAif' not described in 'aac_intr_normal' drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isFastResponse' not described in 'aac_intr_normal' drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'aif_fib' not described in 'aac_intr_normal' Link: https://lore.kernel.org/r/20200713080001.128044-6-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c: In function ‘aac_aif_callback’: drivers/scsi/aacraid/dpcsup.c:232:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] 232 | int status; | ^~~~~~ Link: https://lore.kernel.org/r/20200713080001.128044-5-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
Lee Jones authored
When DBG is not enabled FIB_COUNTER_INCREMENT() results in an empty statement, leaving the contents of if() and else() empty. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/dpcsup.c: In function ‘aac_response_normal’: drivers/scsi/aacraid/dpcsup.c:105:50: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 105 | FIB_COUNTER_INCREMENT(aac_config.AsyncRecved); | ^ drivers/scsi/aacraid/dpcsup.c: In function ‘aac_intr_normal’: drivers/scsi/aacraid/dpcsup.c:411:30: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 411 | aac_config.AsyncRecved); | ^ Link: https://lore.kernel.org/r/20200713080001.128044-4-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
Lee Jones authored
Functions must follow imediately after the header documenting them and all parameters must be present. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/commctrl.c:43: warning: Excess function parameter 'dev' description in 'AAC_DEBUG_PREAMBLE' drivers/scsi/aacraid/commctrl.c:43: warning: Excess function parameter 'arg' description in 'AAC_DEBUG_PREAMBLE' drivers/scsi/aacraid/commctrl.c:167: warning: Function parameter or member 'dev' not described in 'open_getadapter_fib' drivers/scsi/aacraid/commctrl.c:167: warning: Function parameter or member 'arg' not described in 'open_getadapter_fib' drivers/scsi/aacraid/commctrl.c:458: warning: Cannot understand * on line 458 - I thought it was a doc line Link: https://lore.kernel.org/r/20200713080001.128044-3-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
Lee Jones authored
The function headers for aac_get_config_status() and aac_get_containers() have suffered bitrot where the documentation hasn't kept up with the API. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'dev' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'commit_flag' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Excess function parameter 'common' description in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:450: warning: Function parameter or member 'dev' not described in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:450: warning: Excess function parameter 'common' description in 'aac_get_containers' Link: https://lore.kernel.org/r/20200713080001.128044-2-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
Shyam Sundar authored
Fix the following sparse warnings: drivers/scsi/qla2xxx/qla_isr.c:881:23: warning: restricted __le16 degrades to integer drivers/scsi/qla2xxx/qla_isr.c:881:23: warning: cast to restricted __le16 Link: https://lore.kernel.org/r/20200715043358.21668-1-njavali@marvell.comSigned-off-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
YueHaibing authored
These are no longer used and can be removed. Link: https://lore.kernel.org/r/20200715025523.34620-1-yuehaibing@huawei.comReviewed-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
James Smart authored
nvme-fc allows the driver to specify a default devloss_tmo value when registering the remote port. The lpfc driver is currently not doing so, although it is implementing a driver internal node loss value of 30s which also is used on the SCSI FC remote port. As no devloss_tmo is set, the nvme-fc transport defaults to 60s. So there are competing timers. Additionally, due to the competing timers, it is possible the NVMe rport is removed but the SCSI rport remains. It is possible that the SCSI FC rport, which was registered for the NVMe port even if it doesn't utilize the SCSI protocol, had been tuned to not match either the 60s (nvme-fc default) or 30s (lldd default), it gets out of whack. The lldd will defer to the SCSI FC rport as long as the SCSI FC rport has not had its devloss_tmo expire. Correct the situation by specifying a default devloss_tmo to the nvme-fc transport when registering the rport. Take the value from the SCSI FC rport if it exists, otherwise use the driver default. Link: https://lore.kernel.org/r/20200714211412.11773-1-jsmart2021@gmail.comTested-by:
Martin George <Martin.George@netapp.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Varun Prakash authored
'cconn' will never be NULL in cxgbi_conn_alloc_pdu() so remove NULL check. Link: https://lore.kernel.org/r/1594741751-3323-1-git-send-email-varun@chelsio.comReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Anton Blanchard authored
On a big box the lpfc driver emits a few thousand "Set Affinity" lines to the console. Reduce the priority of these from KERN_ERR to KERN_INFO, and also fix a few printks that had no log level. Link: https://lore.kernel.org/r/20200713083908.1104927-1-anton@ozlabs.orgReviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Anton Blanchard <anton@ozlabs.org> Signed-off-by:
-
Lee Jones authored
Kerneldoc function parameter references need to be in the format '@.*: ', else the kerneldoc checker gets confused. Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’: drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable] drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’: drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] from drivers/scsi/qla4xxx/ql4_init.c:9: from drivers/scsi/qla4xxx/ql4_init.c:9: drivers/scsi/qla4xxx/ql4_init.c:953: warning: Function parameter or member 'is_reset' not described in 'qla4xxx_initialize_adapter' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'ha' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'fw_ddb_index' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'state' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'conn_err' not described in 'qla4xxx_process_ddb_changed' Link: https://lore.kernel.org/r/20200713074645.126138-30-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by:
-
Lee Jones authored
And a few missing/excessive parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'dev' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'commit_flag' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Excess function parameter 'common' description in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:450: warning: Function parameter or member 'dev' not described in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:450: warning: Excess function parameter 'common' description in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:568: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_name' drivers/scsi/aacraid/aachba.c:796: warning: Function parameter or member 'scsicmd' not described in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'dev' description in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'cid' description in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:1105: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_serial' drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'phys_luns' description in 'aac_set_safw_attr_all_targets' drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'rescan' description in 'aac_set_safw_attr_all_targets' drivers/scsi/aacraid/aachba.c:3394: warning: Cannot understand * on line 3394 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3687: warning: Cannot understand * on line 3687 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3752: warning: Cannot understand * on line 3752 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3795: warning: Cannot understand * on line 3795 - I thought it was a doc line Link: https://lore.kernel.org/r/20200713074645.126138-29-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
Lee Jones authored
Function parameters need to be documented with format '@.*: '. 'to' is not longer asd_start_timers()'s function parameter. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_hwi.c:589: warning: Function parameter or member 'asd_ha' not described in 'asd_init_ctxmem' drivers/scsi/aic94xx/aic94xx_hwi.c:1157: warning: Excess function parameter 'to' description in 'asd_start_scb_timers' Link: https://lore.kernel.org/r/20200713074645.126138-28-lee.jones@linaro.org Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by:
-
Lee Jones authored
More bitrot issues with function documentation not keeping up with API changes. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_init.c:64: warning: cannot understand function prototype: 'const struct pm8001_chip_info pm8001_chips[] = ' drivers/scsi/pm8001/pm8001_init.c:86: warning: cannot understand function prototype: 'struct scsi_host_template pm8001_sht = ' drivers/scsi/pm8001/pm8001_init.c:115: warning: cannot understand function prototype: 'struct sas_domain_function_template pm8001_transport_ops = ' drivers/scsi/pm8001/pm8001_init.c:212: warning: Function parameter or member 'irq' not described in 'pm8001_interrupt_handler_msix' drivers/scsi/pm8001/pm8001_init.c:237: warning: Function parameter or member 'irq' not described in 'pm8001_interrupt_handler_intx' drivers/scsi/pm8001/pm8001_init.c:265: warning: Function parameter or member 'ent' not described in 'pm8001_alloc' drivers/scsi/pm8001/pm8001_init.c:624: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_init_sas_add' drivers/scsi/pm8001/pm8001_init.c:624: warning: Excess function parameter 'chip_info' description in 'pm8001_init_sas_add' drivers/scsi/pm8001/pm8001_init.c:900: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_setup_msix' drivers/scsi/pm8001/pm8001_init.c:900: warning: Excess function parameter 'chip_info' description in 'pm8001_setup_msix' drivers/scsi/pm8001/pm8001_init.c:900: warning: Excess function parameter 'irq_handler' description in 'pm8001_setup_msix' drivers/scsi/pm8001/pm8001_init.c:981: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_request_irq' drivers/scsi/pm8001/pm8001_init.c:981: warning: Excess function parameter 'chip_info' description in 'pm8001_request_irq' Link: https://lore.kernel.org/r/20200713074645.126138-27-lee.jones@linaro.org Cc: Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> Cc: Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com> Cc: Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com> Acked-by:
-
Lee Jones authored
This is the only use of kerneldoc in the sourcefile and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_init.c:538: warning: Function parameter or member 'asd_ha' not described in 'asd_free_edbs' Link: https://lore.kernel.org/r/20200713074645.126138-26-lee.jones@linaro.org Cc: YueHaibing <yuehaibing@huawei.com> Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by:
-
Lee Jones authored
Most likely caused by bitrot (docs not keeping in sync with API). Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/linit.c: In function ‘aac_biosparm’: drivers/scsi/aacraid/linit.c:368:41: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] drivers/scsi/aacraid/linit.c:243: warning: Function parameter or member 'shost' not described in 'aac_queuecommand' drivers/scsi/aacraid/linit.c:243: warning: Excess function parameter 'done' description in 'aac_queuecommand' drivers/scsi/aacraid/linit.c:1176: warning: Excess function parameter 'inode' description in 'aac_cfg_ioctl' Link: https://lore.kernel.org/r/20200713074645.126138-25-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/linit.c: In function ‘aac_biosparm’: drivers/scsi/aacraid/linit.c:368:41: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] 368 | param->heads, param->sectors, num)); | ^ Link: https://lore.kernel.org/r/20200713074645.126138-24-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by:
-
