- 24 Feb, 2021 1 commit
-
-
Hans de Goede authored
The "OUT Channel Switch" control is a left over from code copied from thr rt5640 codec driver. With the rt5640 codec driver the output volume controls have 2 pairs of mute bits: bit 7, 15: Mute Control for Spk/Headphone/Line Output Port bit 6, 14: Mute Control for Spk/Headphone/Line Volume Channel Bits 7 and 15 are normal mute bits on the rt5670/5672 which are controlled by 2 dapm widgets: SND_SOC_DAPM_SWITCH("LOUT L Playback", SND_SOC_NOPM, 0, 0, &lout_l_enable_control), SND_SOC_DAPM_SWITCH("LOUT R Playback", SND_SOC_NOPM, 0, 0, &lout_r_enable_control), But on the 5670/5672 bit 6 is always reserved, where as bit 14 is "LOUT Differential Mode" on the 5670 and also reserved on the 5672. So the "OUT Channel Switch" control which is controlling bits 6+14 of the "LINE Output Control" register is bogus -> remove it. This should not cause any issues for userspace. AFAICT the rt567x codecs are only used on x86/ACPI devices and the UCM profiles used there do not use the "OUT Channel Switch" control. Signed-off-by:Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210215142118.308516-2-hdegoede@redhat.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 23 Feb, 2021 2 commits
-
-
Alexander Shiyan authored
When using the driver in I2S TDM mode, the _fsl_ssi_set_dai_fmt() function rewrites the number of slots previously set by the fsl_ssi_set_dai_tdm_slot() function to 2 by default. To fix this, let's use the saved slot count value or, if TDM is not used and the slot count is not set, proceed as before. Fixes: 4f14f5c1 ("ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode") Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20210216114221.26635-1-shc_work@mail.ruSigned-off-by:
-
Colin Ian King authored
There is potential read of the uninitialized variable ec_tx if the call to snd_soc_component_read fails or returns an unrecognized w->name. To avoid this corner case, initialize ec_tx to -1 so that it is caught later when ec_tx is bounds checked. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 4f692926 ("ASoC: codecs: lpass-rx-macro: add dapm widgets and route") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210215163313.84026-1-colin.king@canonical.comSigned-off-by:
-
- 22 Feb, 2021 2 commits
-
-
Jack Yu authored
Enable BCLK detection after calibration. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210222090057.29532-2-jack.yu@realtek.comSigned-off-by:
-
Jack Yu authored
Remove 0x100 cache re-sync to solve i2c communication error. Signed-off-by:
-
- 17 Feb, 2021 6 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: bytcr_rt5640: Add quirks for 4 more tablet / 2-in-1 models" from Hans de Goede <hdegoede@redhat.com>: Hi All, Here is a patch series adding quirks with device-specific settings for 4 more tablet / 2-in-1 models. Regards, Hans Hans de Goede (4): ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet sound/soc/intel/boards/bytcr_rt5640.c | 37 +++++++++++++++++++++++++++ sound/soc/intel/boards/bytcr_rt5651.c | 13 ++++++++++ 2 files changed, 50 insertions(+) -- 2.30.1
-
Kai Vehmanen authored
In case DPCM runtime has multiple CPU DAIs, dpcm_init_runtime_hw() is called multiple times, once for each CPU DAI. This will lead to ignoring hw limits of all but the last DAI. Fix this by moving soc_pcm_hw_init() up by one level to dpcm_init_runtime_hw(). Fixes: 140f553d ("ASoC: soc-pcm: fix hwparams min/max init for dpcm") Suggested-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210216172251.3023723-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Hans de Goede authored
The Acer One S1002 tablet is using an analog mic on IN1 and has its jack-detect connected to JD2_IN4N, instead of using the default IN3 for its internal mic and JD1_IN4P for jack-detect. Note it is also using AIF2 instead of AIF1 which is somewhat unusual, this is correctly advertised in the ACPI CHAN package, so the speakers do work without the quirk. Add a quirk for the mic and jack-detect settings. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has a jack-detect switch which reads 1/high when a jack is inserted, rather then using the standard active-low setup which most jack-detect switches use. All other settings are using the defaults. Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV flags for this. Signed-off-by:
-
Hans de Goede authored
The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using SSP2 (AIF1) and it mostly works with the defaults. But instead of using DMIC1 it is using an analog mic on IN1, add a quirk for this. Signed-off-by:
-
Hans de Goede authored
The Estar Beauty HD MID 7316R tablet almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by:
-
- 15 Feb, 2021 1 commit
-
-
Kai Vehmanen authored
When runtime is initialized with dpcm_init_runtime_hw(), some of the min/max calculations assume that defaults are set. For example calculation of channel min/max values may be done using zero-initialized data and soc_pcm_hw_update_chan() will always return max-channels of 0 in this case. This will result in failure to open the PCM at all. Fix the issue by calling soc_pcm_hw_init() before calling any soc_pcm_hw_update_*() functions. Remove the conditional code on runtime->hw.formats as this field is anyways set in soc_pcm_hw_init(). Fixes: 6cb56a45 ("ASoC: soc-pcm: add soc_pcm_hw_update_chan()") Reported-by:
-
- 12 Feb, 2021 3 commits
-
-
Kuninori Morimoto authored
We have soc_pcm_hw_update_xxx() now. This patch creates same function for format. Signed-off-by:
-
Kuninori Morimoto authored
We have soc_pcm_hw_update_rate() now. This patch creates same function for chan. Signed-off-by:
-
Kuninori Morimoto authored
To update hw, we need to follow setting order 1) set hw->rates 2) call snd_pcm_limit_hw_rates() 3) update hw->rate_min/max To avoid random settings, this patch adds new soc_pcm_hw_update_rate() and share updating code. Signed-off-by:
-
- 11 Feb, 2021 12 commits
-
-
Charles Keepax authored
This callback structure has never been used and it is not clear why it was added in the first place. Remove it to clear up the code a little. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210211172106.16258-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Kai Vehmanen authored
With recent SOF 1.7 pre-releases, kernel has been emitting following warnings at probe: [10006.645216] sof-audio-pci 0000:00:1f.3: warn: FW ABI is more recent than kernel [10006.652137] sof-audio-pci 0000:00:1f.3: warn: topology ABI is more recent than kernel The warnings are emitted due to increase of the patch-level in firmware mainline (to 3.17.1). But the patch level should not be considered even in the strict ABI check, so modify the kernel side logic that makes the check and only consider the major.minor components. BugLink: https://github.com/thesofproject/linux/issues/2647Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210211172440.2371447-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Mark Brown authored
It is recommended to not specifiy clocks property in an endpoint subnode. This series moves clocks to device node. However after moving the clocks to device node, the audio playback or capture fails. The specified clock is not actually getting enabled and hence the failure is seen. There seems to be a bug in simple-card-utils.c where clock handle is not assigned when parsing clocks from device node. Fix the same and revert original change which actually added clocks property in endpoint subnode. Also update Jetson AGX Xavier DT where the usage is found. Sameer Pujar (3): ASoC: simple-card-utils: Fix device module clock Revert "ASoC: audio-graph-card: Add clocks property to endpoint node" arm64: tegra: Move clocks from RT5658 endpoint to device node .../devicetree/bindings/sound/audio-graph-port.yaml | 3 --- arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 +- sound/soc/generic/simple-card-utils.c | 13 ++++++------- 3 files changed, 7 insertions(+), 11 deletions(-) -- 2.7.4
-
Srinivas Kandagatla authored
This patch adds dapm widgets and routes on this codec Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210211122735.5691-8-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec TX macro block which is used for connecting with external Soundwire TX Codecs like WCD938x. This patch adds support to the codec part of the TX Macro block Signed-off-by:
-
Srinivas Kandagatla authored
This binding is for LPASS has internal codec TX macro which is for connecting with Soundwire TX codecs like WCD938x. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210211122735.5691-6-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
This patch adds iir widgets and mixers on this codec Signed-off-by:
-
Srinivas Kandagatla authored
This patch adds dapm widgets and routes on this codec Signed-off-by:
-
Srinivas Kandagatla authored
LPASS RX Codec Macro is available in Qualcomm LPASS (Low Power Audio SubSystem). This is used for connecting with SoundWire devices like WCD938x Codecs to provide headphone/ear/lineout functionality. Signed-off-by:
-
Srinivas Kandagatla authored
This binding is for LPASS has internal codec RX macro which is for connecting with SoundWire RX codecs like WCD938x. Signed-off-by:
-
Sameer Pujar authored
An endpoint is not a device and it is recommended to use clocks property in the device node. Hence reverting the original change. Fixes: 531e5b7a ("ASoC: audio-graph-card: Add clocks property to endpoint node") Suggested-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1612939421-19900-3-git-send-email-spujar@nvidia.comSigned-off-by:
-
Sameer Pujar authored
If "clocks = <&xxx>" is specified from the CPU or Codec component device node, the clock is not getting enabled. Thus audio playback or capture fails. Fix this by populating "simple_dai->clk" field when clocks property is specified from device node as well. Also tidy up by re-organising conditional statements of parsing logic. Fixes: bb6fc620 ("ASoC: simple-card-utils: add asoc_simple_card_parse_clk()") Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
- 10 Feb, 2021 13 commits
-
-
Mark Brown authored
Merge series "ASoC: dapm/pins: handle component prefix" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: SoundWire machine drivers make a heavy use of component prefixes to uniquify control names. This however results in errors when looking for widgets or pins. This patchset suggests two solutions but feedback or suggestions on how to take the prefix into account would be welcome. Bard Liao (1): ASoC: Intel: boards: max98373: get dapm from cpu_dai Shuming Fan (1): ASoC: dapm: use component prefix when checking widget names sound/soc/intel/boards/sof_maxim_common.c | 5 +++-- sound/soc/soc-dapm.c | 13 ++++++++++++- 2 files changed, 15 insertions(+), 3 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: SOF: cleanups" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Minor cleanups for error formats, missing cases, useless functions and simplifications. Curtis Malainey (2): ASoC: SOF: add missing pm debug ASoC: SOF: fix string format for errors Fred Oh (1): ASoC: SOF: ext_manifest: use explicit number for elem_type Guennadi Liakhovetski (2): ASoC: SOF: remove unused functions ASoC: SOF: HDA: (cosmetic) simplify hda_dsp_d0i3_work() include/sound/sof/ext_manifest.h | 6 ++-- sound/soc/sof/intel/hda-compress.c | 2 +- sound/soc/sof/intel/hda-dsp.c | 18 +++++------ sound/soc/sof/intel/hda-loader.c | 6 ++-- sound/soc/sof/intel/hda-pcm.c | 2 +- sound/soc/sof/intel/hda-trace.c | 4 +-- sound/soc/sof/intel/hda.c | 50 ------------------------------ sound/soc/sof/intel/hda.h | 1 - sound/soc/sof/ipc.c | 2 ++ 9 files changed, 19 insertions(+), 72 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: SOF/Intel/SoundWire: add missing quirks and DMIC support" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: HP Spectre x360 convertible devices rely on a mixed SoundWire+DMIC configuration which wasn't well supported. This lead to the discovery that we missed the TGL_HDMI quirk on a number of Dell devices, the addition of DMIC autodetection (based on NHLT tables), the addition of new component strings needed by UCM, and work-arounds due to problematic DSDT tables. Changes since v1: Rebase to remove first three patches already merged. Fix allmodconfig issues (undeclared kernel parameter) Bard Liao (1): ASoC: intel: sof_sdw: add trace for dai links Guennadi Liakhovetski (1): ASoC: SOF: Intel: HDA: don't keep a temporary variable Pierre-Louis Bossart (8): ASoC: Intel: sof_sdw: reorganize quirks by generation ASoC: Intel: sof-sdw: indent and add quirks consistently ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible ASoC: Intel: sof_sdw: add mic:dmic and cfg-mics component strings ASoC: Intel: soc-acpi: add ACPI matching table for HP Spectre x360 ASoC: SOF: Intel: SoundWire: refine ACPI match ASoC: SOF: Intel: detect DMIC number in SoundWire mixed config ASoC: SOF: Intel: hda: add dev_dbg() when DMIC number is overridden Rander Wang (1): ASoC: Intel: sof_sdw: detect DMIC number based on mach params sound/soc/intel/boards/sof_sdw.c | 134 ++++++----- .../intel/common/soc-acpi-intel-tgl-match.c | 20 ++ sound/soc/sof/intel/hda.c | 212 ++++++++++++------ 3 files changed, 244 insertions(+), 122 deletions(-) -- 2.25.1
-
Kai Vehmanen authored
With current delayed probe implementation, sof_probe_complete is not called in case of errors. And as this function is responsible for decrementing runtime pm usage counter, this will result in following problem: - probe driver in conditions where probe will fail (to force the condition on Intel SOF systems, set "snd_sof_intel_hda_common.codec_mask=0") - unload driver (runtime-pm usage_count is leaked) - fix the issue by installing missing fw, modifying module parameters, etc actions - try to load driver again -> success, probe ok -> device never enters runtime suspend Fix the issue by storing result of delayed probe to a state variable and providing new snd_sof_device_probe_completed() to be queried from SOF PCI/ACPI/OF drivers. If probe never completed successfully, runtime PM was not set up and thus at remove(), we should not increment usage count anymore. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Link: https://lore.kernel.org/r/20210210105237.2179273-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Shengjiu Wang authored
This log message should be a debug message, because it doesn't return directly but continue next loop. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
-
Pierre-Louis Bossart authored
It's useful for debug and system integration to show cases where we ignore the number of microphones reported by NHLT. Suggested-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
fixup_tplg_name() doesn't need to keep the string, allocated for filename - it's temporary. Reviewed-by:
-
Pierre-Louis Bossart authored
The pinmux allows for 2 SoundWire links to be enabled along with DMICs. This was the default configuration on the TGL-RVP. One issue with this configuration is that we don't have a means to automatically detect how many DMICs are used, which in turn requires the user to manually rename the topology file required on a platform. This was borderline acceptable for Intel RVPs, but now that this configuration is present in HP devices we need to automate the process. This patch makes use of the NHLT information and will pass the DMIC number to the machine driver as a parameter. A follow-up patch will expose the DMIC number to userspace/UCM with the configuration strings. The Google devices do make use of DMICs instead of SoundWire link 2 and 3, but their topology is unique enough that they do not need any NHTL support or topology renaming. Signed-off-by:
-
Pierre-Louis Bossart authored
We have existing platforms where the wrong machine is selected. We need to make sure the number of devices reported on a link matches what we expect for a link descriptor. This helps avoid using the TGL-RVP configuration for an HP platform or vice-versa, depending on the order in which they are inserted in the table. Co-developed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
This device only has a single amplifier on link1, so we need a dedicated entry to find a match. Signed-off-by:
-
Bard Liao authored
We create dai links dynamically, so it is not easy to know what dai links are created. So adding trace for dai link name and id. Reviewed-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Rander Wang authored
Current driver create DMIC dai based on quirk for each platforms, so we need to add quirk for new platforms. Now driver reports DMIC number to machine driver and machine driver can create DMIC dai based on this information. The old check is reserved for some platforms may be failed to set the DMIC number in BIOS. Reviewed-by:
-
Pierre-Louis Bossart authored
UCM needs to know which microphone is used (dmic or RT715-based), let's add the information in the component string. Note the slight change from HDAudio platforms where 'cfg-dmics' was used. 'cfg-mics' is used here with the intent that this component string describes either the number of PCH-attached microphones or the number of RT715-attached ones (the assumption is that the two configurations are mutually exclusive). Suggested-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
-
