This is a patch to the ipuv3-crtc.c file that fixes up two "lines
over 80 characters" warnings found by the checkpatch.pl tool,
keeping the alignment of the x/y/width/height parameters for
readability.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The else condition is redundant after a return. Remove these redundant else conditions.
Signed-off-by: Fred Chou <fred.chou.nd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Dipak Zope <dipakzope.kernel.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The use_interrupts is used only in dagp_request_irq() for checking
a value from user config file. It doesn't need in board_t struct.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The brd(board_t) is initialized with zero, so "intr_used"
is not needed to set zero when request_irq() is failed.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch.pl fix. Use #include <linux/uaccess.h> instead of
<asm/uaccess.h>
Signed-off-by: Kieron Browne <kieron.browne@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In dgnc_drivers.h, DPR macro and DPR_* macros are defined but do nothing.

So remove them and related codes.

CC: Lidza Louina <lidza.louina@gmail.com>
CC: Mark Hounschell <markh@compro.net>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed the following warning generated by checkpatch.pl:

WARNING: Missing a blank line after declarations
Signed-off-by: Chaitanya Hazarey <c@24.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

XLR has one network controller and XLS has two network controllers, each
controller has 4 gmac devices. This patch initializes each controller as
a parent device and the four gmac devices of a controller are connected
to the parent controller as a child
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SGMII PHY address calculation should be based on phy_addr of priv data
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function name nlm_cop2_enable() and nlm_cop2_restore() in
file "netlogic/xlr/fmn.c" has been renamed to nlm_cop2_enable_irqsave
and nlm_cop2_disable_irqrestore respectively in commit "64f6ebe6
MIPS: Netlogic: rename nlm_cop2_save/restore".

This patch takes care of these changes
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl spaces required around that '<' errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl switch and case should be at the same indent errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl space required after that ',' errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl space prohibited before that close parenthesis ')' errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch.pl "foo* bar" should be "foo *bar" errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed missing blank line after declarations issues
Signed-off-by: Matthew Casey <mdcasey@chabloom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following sparse warnings in rtl8821ae/stats.c

drivers/staging/rtl8821ae/stats.c:62:6: warning: symbol 'rtl_translate_todbm' was not declared. Should it be static?
drivers/staging/rtl8821ae/stats.c:101:6: warning: symbol 'rtl_process_ui_rssi' was not declared. Should it be static?
Signed-off-by: Hoang Tran <hoangtran.gwr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixes:

drivers/staging/built-in.o:(.opd+0xaab8): multiple definition of `rtl88e_phy_rf_config'
drivers/net/built-in.o:(.opd+0x78840): first defined here
drivers/staging/built-in.o:(.opd+0xa9f8): multiple definition of `rtl88e_download_fw'
drivers/net/built-in.o:(.opd+0x781b0): first defined here
drivers/staging/built-in.o: In function `.rtl88e_phy_rf_config':
(.text+0xe0a00): multiple definition of `.rtl88e_phy_rf_config'
drivers/net/built-in.o:(.text+0xe85a48): first defined here
drivers/staging/built-in.o: In function `.rtl88e_download_fw':
(.text+0xdf28c): multiple definition of `.rtl88e_download_fw'
drivers/net/built-in.o:(.text+0xe6f330): first defined here
drivers/staging/built-in.o: In function `.rtl88e_phy_mac_config':
(.text+0xdf984): multiple definition of `.rtl88e_phy_mac_config'
drivers/net/built-in.o:(.text+0xe84a8c): first defined here
drivers/staging/built-in.o: In function `.rtl88e_phy_bb_config':
(.text+0xdfa2c): multiple definition of `.rtl88e_phy_bb_config'
drivers/net/built-in.o:(.text+0xe84d14): first defined here
drivers/staging/built-in.o:(.opd+0xaa58): multiple definition of `rtl88e_phy_bb_config'
drivers/net/built-in.o:(.opd+0x78828): first defined here
drivers/staging/built-in.o:(.opd+0xaa28): multiple definition of `rtl88e_phy_mac_config'
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a merger of PSTxDataHead_ab and PSTxShortBufHead of which typedef struct tagSTxShortBufHead
is removed.

This is formed as fifo_ctl, time_stamp, struct vnt_phy_field, duration and time_stamp_off.

Replacing stuctures in csBeacon_xmit and doing endian correction where necessary.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ccmp_pn is the size of IEEE80211_CCMP_PN_LEN (6)
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix conflict with WLAN_EID macros, by removing them.

This allows the adding other definitions from the ieee80211 header.

Eventually the 80211mgr.h header will be removed.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The module can not load more than once.

Remove device_nics, MAX_UINTS and OPTION_DEFAULT

Remove dead index variable from device_get_options
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netdevice can only be created once.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver can only load once from the instance provided
by pci_dev.

struct vnt_private next, prev and pDevice_Infos are removed.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove data members bySignalField*, byServiceField*, wTransmitLength*
from structures in desc.h
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using vnt_get_phy_field means the values are not in the
correct write order the lower word and the upper word need
to be swapped over for an u32 write out.

Rather create another data variable to manipulate this structure.
Create a new union vnt_phy_field_swap with struct vnt_phy_field,
the u16 word swap and the u32 write out.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing wLen and pointing to correct member.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a replacement for BBvCalculateParameter for getting
the phy fields via struct vnt_phy_field

This is a direct copy from the vt6656 driver.

BBvCalculateParameter will removed later.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This will replace bySignalField*, byServiceField* and wTransmitLength_b
members of these strutures, these are removed in the last patch.

The len member is of little endian type.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bCCK is always set to true, the only place it is used is in
BBvCalculateParameter which nots the value to false.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PLICE_DEBUG is not defined remove dead code.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove macro and directive leaving the code.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PLICE_DEBUG is not defined in any header for this file.

Remove code, references and directives.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ether_crc is already in kernel remove local code and
include linux/crc32.h
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the following sparse warning:

drivers/staging/rtl8188eu/hal/HalHWImg8188E_MAC.c:119:6: warning: symbol
'rtl88e_phy_mac_config' was not declared. Should it be static?
Signed-off-by: Max Vozeler <max@hinterhof.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename CamelCase variables and function name.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This implements NAPI support for et131x by:

-adding a napi_struct to the private adapter struct
-changing netfif_rx_skb() call to netif_receive_skb()
-changing et131x_handle_recv_interrupt() to et131x_handle_recv_pkts()
 and taking a budget allocation.
-changing et131x_handle_send_interrupt() to et131x_handle_send_pkts()
-replacing bottom half workqueue with poll function which handles
 send & receive of skbs.
-adding various other necessary standard napi calls.

Also remove this item from the README TODO list.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>