The new driver introduces harmless warnings:

warning: (PM_RMOBILE && ARCH_RCAR_GEN1 && ARCH_RCAR_GEN2 && ARCH_R7S72100 && MESON_GX_PM_DOMAINS) selects PM_GENERIC_DOMAINS which has unmet direct dependencies (PM)
warning: (MESON_GX_PM_DOMAINS) selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)

This adds CONFIG_OF and CONFIG_PM dependencies to ensure it
will only be enabled in valid configurations.

Fixes: 75fcb5ca ("soc: amlogic: add Meson GX VPU Domains driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-drivers-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers

Pull "Amlogic drivers for v4.15, round 2" from Kevin Hilman:

- add PM domain driver for GX VPU

* tag 'amlogic-drivers-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  dt-bindings: power: add amlogic meson power domain bindings
  soc: amlogic: add Meson GX VPU Domains driver

The PSCI checker suspend_test_thread() function (ie executed for the
suspend test) requires an on-stack timer to carry out the test it
executes; it sets it up through the setup_timer_on_stack() API.

setup_timer_on_stack() requires its counterpart destroy_timer_on_stack()
to be called when the timer is disposed of but the PSCI checker code is
currently missing that call, leaving the timer object in an incosistent
state when the PSCI checker stops the thread executing the suspend
test.

Add the missing destroy_timer_on_stack() call to fix the omission.

Fixes: ea8b1c4a ("drivers: psci: PSCI checker module")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reported-by: Kees Cook <keescook@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "Mediatek: soc driver updates for v4.15" from Matthias Brugger:

- add 32 bit read/write support to pwrap
- add mt7622 support to pwrap
- test build all mediatek soc drivers
- fix compiler issues
- clean up Kconfig description

* tag 'v4.14-next-soc' of https://github.com/mbgg/linux-mediatek:
  soc: mediatek: pwrap: fix fatal compiler error
  soc: mediatek: pwrap: fix compiler errors
  arm64: mediatek: cleanup message for platform selection
  soc: Allow test-building of MediaTek drivers
  soc: mediatek: place Kconfig for all SoC drivers under menu
  soc: mediatek: pwrap: add support for MT7622 SoC
  soc: mediatek: pwrap: add common way for setup CS timing extenstion
  soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
  soc: mediatek: pwrap: refactor pwrap_init for the various PMIC types
  soc: mediatek: pwrap: add pwrap_write32 for writing in 32-bit mode
  soc: mediatek: pwrap: add pwrap_read32 for reading in 32-bit mode
  dt-bindings: arm: mediatek: add MT7622 string to the PMIC wrapper doc
  ARM: mediatek: Cocci spatch "of_table"
  soc: mediatek: pwrap: fixup warnings from coding style

Merge tag 'at91-ab-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers

Pull "soc for 4.15" from Alexandre Belloni:

 - add SoC ids for the sama5d2 SiPs
 - Improve the AT91 maintainers entry

* tag 'at91-ab-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  MAINTAINERS: Add SoC drivers to AT91 entry
  drivers: soc: atmel: Add basic support for new sama5d2 SiPs

Merge tag 'amlogic-drivers' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers

Pull "Amlogic drivers for v4.15" from Kevin Hilman:

- add SoC info driver for 32-bit Amlogic SoCs

* tag 'amlogic-drivers' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  soc: amlogic: Add Meson6/Meson8/Meson8b/Meson8m2 SoC Information driver

Merge tag 'qcom-drivers-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Pull "Qualcomm ARM Based Driver Updates for v4.15 Part 2" from Andy Gross:

* Add Qualcomm Remote Filesystem Memory driver
* Add OF linkage for RMTFS

* tag 'qcom-drivers-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  soc: qcom: Remote filesystem memory driver
  dt-binding: soc: qcom: Add binding for rmtfs memory
  of: reserved_mem: Accessor for acquiring reserved_mem
  of/platform: Generalize /reserved-memory handling

Merge tag 'keystone_soc_drivers_4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers

Pull "Keystone SOC for 4.15" from Santosh Shilimkar

* tag 'keystone_soc_drivers_4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ti_sci: Use %pS printk format for direct addresses

Pull "Broadcom drivers changes for 4.15 (part 2)" from Florian Fainelli:

This pull request contains Broadcom ARM/ARM64/MIPS SoCs changes for 4.15
(second part), please pull the following:

- Markus updates the Broadcom STB DPFE driver to avoid loading the firmware when
  unnecessary to accomodate for specific platform restrictions

- Florian adds support for the Broadcom Hurricane 2 SoC iProc PLL clock needed
  to get the proper CPU clock frequency

* tag 'arm-soc/for-4.15/drivers-part2' of http://github.com/Broadcom/stblinux:
  clk: bcm: Add Broadcom Hurricane 2 clock support
  memory: brcmstb: dpfe: skip downloading firmware when possible
  memory: brcmstb: dpfe: introduce is_dcpu_enabled()

Merge tag 'tegra-for-4.15-thermal' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "thermal: tegra: Changes for v4.15-rc1" from Thierry Reding:

This contains the Tegra186 BPMP thermal driver. It is used to monitor
and access several thermal sensors found in the SoC.

* tag 'tegra-for-4.15-thermal' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  thermal: Add Tegra BPMP thermal sensor driver
  dt-bindings: Add bindings for nvidia,tegra186-bpmp-thermal
  dt-bindings: clock: tegra: Add sor1_out clock

Merge tag 'tegra-for-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "soc/tegra: Changes for v4.15-rc1" from Thierry Reding:

Contains a fix to the generic power domain driver to properly report
errors propagated from BPMP.

* tag 'tegra-for-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: bpmp: Check BPMP response return code

Merge tag 'tegra-for-4.15-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

Pull "firmware: tegra: Changes for v4.15-rc1" from Thierry Reding:

This contains a couple of (non-critical) fixes and improvements for the
BPMP driver as well as support for debugfs.

* tag 'tegra-for-4.15-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: Add BPMP debugfs support
  firmware: tegra: Add stubs when BPMP not enabled
  firmware: tegra: Expose tegra_bpmp_mrq_return()
  firmware: tegra: Propagate error code to caller

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: minor whitespace fixups]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

The Video Processing Unit needs a specific Power Domain powering scheme
this driver handles this as a PM Power Domain driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

The Qualcomm remote file system protocol is used by certain remoteprocs,
in particular the modem, to read and write persistent storage in
platforms where only the application CPU has physical storage access.

The protocol is based on a set of QMI-encoded control-messages and a
shared memory buffer for exchaning the data. This driver implements the
latter, providing the user space service access to the carved out chunk
of memory.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This adds the binding for describing shared memory used to exchange file
system blocks between the RMTFS client and service. A client for this is
generally found in the modem firmware and is used for accessing
persistent storage for things such as radio calibration.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

In some cases drivers referencing a reserved-memory region might want to
remap the entire region, but when defining the reserved-memory by "size"
the client driver has no means to know the associated base address of
the reserved memory region.

This patch adds an accessor for such drivers to acquire a handle to
their associated reserved-memory for this purpose.

A complicating factor for the implementation is that the reserved_mem
objects are created from the flattened DeviceTree, as such we can't
use the device_node address for comparison. Fortunately the name of the
node will be used as "name" of the reserved_mem and will be used when
building the full_name, so we can compare the "name" with the basename
of the full_name to find the match.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

By iterating over all /reserved-memory child nodes and match each one to
a list of compatibles that we want to treat specially, we can easily
extend the list of compatibles to handle - without having to resort to
of_platform_populate() that would create unnecessary platform_devices.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

When adding the MT6380 compatible, the sentinel for of_device_id was
deleted, which leades to the following compiler error:
FATAL: drivers/soc/mediatek/mtk-pmic-wrap: struct of_device_id is not terminated with a NULL entry!

Fix this by adding the sentinel again.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

When compiling using sparse, we got the following error:
drivers/soc/mediatek/mtk-pmic-wrap.c:686:25: error: dubious one-bit signed bitfield

Changing the data type to unsigned fixes this.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Merge tag 'soc-fsl-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers

Pull "FSL/NXP ARM SoC drivers updates for 4.14" from Li Yang:

This adds the DPAA QBMan support for ARM SoCs and a few minor fixes/updates.

This pull request includes updates to the QMAN/BMAN drivers to make
them work on the arm/arm64 architectures in addition to the power
architecture and a few minor update/bug-fix to the soc/fsl drivers.

We got the Reviewed-by from Catalin on the ARM architecture side.

DPAA (Data Path Acceleration Architecture) is a set of hardware
components used on some FSL/NXP QorIQ Networking SoCs, it provides the
infrastructure to support simplified sharing of networking interfaces
and accelerators by multiple CPU cores, and the accelerators
themselves.  The QMan(Queue Manager) and BMan(Buffer Manager) are
infrastructural components within the DPAA framework.  They are used to
manage queues and buffers for various I/O interfaces, hardware
accelerators.

* tag 'soc-fsl-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc/fsl/qbman: Enable FSL_LAYERSCAPE config on ARM
  soc/fsl/qbman: Add missing headers on ARM
  soc/fsl/qbman: different register offsets on ARM
  soc/fsl/qbman: add QMAN_REV32
  soc/fsl/qbman: Rework portal mapping calls for ARM/PPC
  soc/fsl/qbman: Fix ARM32 typo
  soc/fsl/qbman: Drop L1_CACHE_BYTES compile time check
  soc/fsl/qbman: Drop set/clear_bits usage
  dt-bindings: soc/fsl: Update reserved memory binding for QBMan
  soc/fsl/qbman: Use shared-dma-pool for QMan private memory allocations
  soc/fsl/qbman: Use shared-dma-pool for BMan private memory allocations
  soc/fsl/qbman: Add common routine for QBMan private allocations
  soc/fsl/guts: Add compatible string for LS1088
  soc/fsl/qman: Sleep instead of stuck hacking jiffies

Pull "Reset controller changes for v4.15" from Philipp Zabel:

- add ARC AX10x support,
  merged from a separate branch that is also included in the ARC tree
- add Stratix10 support via socfpga
- unify socfpga, stm32, sunxi, and zx2967 into simple-reset driver
- add Meson GX reset level control and remove an unneeded check
- add Uniphier PXs3 and ethernet reset controls
- add MT7622 reset control dt-bindings header

* tag 'reset-for-4.15' of git://git.pengutronix.de/git/pza/linux:
  reset: zx2967: use the reset-simple driver
  reset: stm32: use the reset-simple driver
  reset: socfpga: use the reset-simple driver
  reset: sunxi: use reset-simple driver
  reset: add reset-simple to unify socfpga, stm32, sunxi, and zx2967
  reset: meson: remove unneeded check in meson_reset_reset
  reset: meson: add level reset support for GX SoC family
  reset: uniphier: add PXs3 reset data
  reset: mediatek: add reset controller dt-bindings required header for MT7622 SoC
  reset: socfpga: build the reset-socfpga for Stratix10 SOC
  reset: uniphier: add ethernet reset control support
  reset: socfpga: fix for 64-bit compilation
  ARC: reset: introduce AXS10x reset driver

Pull "OMAP-GPMC: driver updates for v4.15" from Roger Quadros:
* get rid of unused field in platform data structure.

* tag 'gpmc-omap-for-v4.15' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Drop gpmc_status

Merge tag 'qcom-drivers-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Pull "Qualcomm ARM Based Driver Updates for v4.15" from Andy Gross:

* Add SCM firmware APIs for download mode and secure IO service
* Add SMEM support for cached entries
* Add SMEM support for global partition, dynamic item limit, and more hosts

* tag 'qcom-drivers-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  firmware: qcom: scm: Expose download-mode control
  firmware: qcom: scm: Expose secure IO service
  soc: qcom: smem: Increase the number of hosts
  soc: qcom: smem: Support dynamic item limit
  soc: qcom: smem: Support global partition
  soc: qcom: smem: Read version from the smem header
  soc: qcom: smem: Use le32_to_cpu for comparison
  soc: qcom: smem: Support getting cached entries
  soc: qcom: smem: Rename "uncached" accessors

Merge tag 'samsung-drivers-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers

Pull "Samsung soc drivers changes for v4.15" from Krzysztof Kozłowski:

Remove of Exynos4212 related dead code (no more support for this SoC).

* tag 'samsung-drivers-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  soc: samsung: Remove Exynos4212 related dead code

Merge tag 'scpi-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers

Pull "ARM SCPI updates/cleanups for v4.15" from Sudeep Holla:

1. Fixes to get rid of sparse warnings
2. Use of FIELD_GET and GENMASK for better subfields handling
3. Make mbox_free_channels device-managed helping in removing unnecessary code
4. Various other cleanups to simplify and improve code readability

* tag 'scpi-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scpi: silence sparse warnings
  firmware: arm_scpi: remove all single element structures
  firmware: arm_scpi: drop unnecessary type cast to scpi_shared_mem
  firmware: arm_scpi: improve struct sensor_value
  firmware: arm_scpi: improve handling of protocol and firmware version subfields
  firmware: arm_scpi: improve struct dvfs_info to make code better readable
  firmware: arm_scpi: remove scpi_remove
  firmware: arm_scpi: make freeing mbox channels device-managed
  firmware: arm_scpi: pre-populate dvfs info in scpi_probe
  firmware: arm_scpi: remove two unneeded devm_kfree's in scpi_remove
  firmware: arm_scpi: remove usage of drvdata and don't reset scpi_info to null

Merge tag 'renesas-drivers-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Pull "Renesas ARM Based SoC Drivers Updates for v4.15" from Simon Horman:

Add basic support for R-Car V3M (R8A77970) SoC.

Sergei Shtylyov says:

* Add support for R-Car V3M (R8A77970) SoC power areas to the R-Car SYSC
  driver

* Add support for identifying the R-Car V3M (R8A77970) SoC

* Add support for R-Car V3M (R8A77970) to the R-Car RST driver -- this
  driver is  needed  for the clock driver to work

* tag 'renesas-drivers-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: rcar-sysc: add R8A77970 support
  soc: renesas: identify R-Car V3M
  soc: renesas: rcar-rst: add R8A77970 support

Pull "Broadcom drivers changes for 4.15" from Florian Fainelli:

This pull requests contains Broadcom SoCs drivers updates for 4.15, please pull
the following:

- Markus adds support for the Broadcom STB DDR PHY frontend which supports
  dynamic firmware loading and offers the ability to respond with DRAM refresh
  rates. He also adds a proper documentation binding document for that
  peripheral

- Brian adds support for S2/S3/S5 system suspend/resume modes on ARM-based SoCs
  which is not new but had been lingering for a long time.

- Justin adds S2/S3 system suspend/resume modes on MIPS-based SoCs which is a
  bit new newer and builds on top of the ARM-based support.

- Florian adds Device Tree binding documents for both ARM and MIPS based systems
  describing the necessary nodes for S2/S3/S5 on these SoCs.

(This pull request somehow missed the 4.14 merge window and is now being sent again
for 4.15 along with build fixes from Arnd).

* tag 'arm-soc/for-4.15/drivers' of http://github.com/Broadcom/stblinux:
  soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)
  dt-bindings: Document MIPS Broadcom STB power management nodes
  soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)
  dt-bindings: ARM: brcmstb: Update Broadcom STB Power Management binding
  memory: brcmstb: Add driver for DPFE
  dt-bindings: Add bindings for Broadcom STB DRAM Sensors

The latest kernel tree already can support more MediaTek platforms such as
MT2712 and MT7622, so additional descriptions for those platforms are added
and certain cleanups are also being made here.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The COMPILE_TEST alternative dependency allows test-building the
drivers but only as long as the build system itself will look into
the directory where the drivers reside.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add cleanup for placing all Kconfig for all MediaTek SoC drivers under
the independent menu as other SoCs vendor usually did. Since the menu
would be shown depending on "ARCH_MEDIATEK || COMPILE_TEST" selected and
MTK_PMIC_WRAP is still safe compiling with the case of "COMPILE_TEST"
only, the superfluous dependency for those items under the menu also is
also being removed for the sake of simplicity.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add the registers, callbacks and data structures required to make the
PMIC wrapper work on MT7622.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Multiple platforms would always use their own way handling CS timing
extension on the bus which leads to a little bit code duplication.
Therefore, the patch groups the similar logic to handle CS timing
extension into the common function which allows the following SoCs
have more reusability for configing CS timing.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add MediaTek MT6380 regulator becoming one of PMIC wrapper slave
and also add extra new regmap_config of 32-bit mode for MT6380
since old regmap_config of 16-bit mode can't be fit into the need.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

pwrap initialization is highly associated with the base SoC and the
target PMICs, so slight refactorization is made here for allowing
pwrap_init to run on those PMICs with different capability from the
previous MediaTek PMICs and the determination for the enablement of the
pwrap capability depending on PMIC type. Apart from this, the patch
makes the driver more extensible especially when more PMICs join into
the pwrap driver.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Some regulators such as MediaTek MT6380 also has to be written in
32-bit mode. So the patch adds pwrap_write32, rename old pwrap_write
into pwrap_write16 and one additional function pointer is introduced
for increasing flexibility allowing the determination which mode is
used by the pwrap slave detection through device tree.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Some regulators such as MediaTek MT6380 has to be read in 32-bit mode.
So the patch adds pwrap_read32, rename old pwrap_read into pwrap_read16
and one function pointer is introduced for increasing flexibility allowing
the determination which mode is used by the pwrap slave detection through
device tree.
Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Signed-off-by: Chenglin Xu <chenglin.xu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add checks for the return code in BPMP response messages.
Signed-off-by: Timo Alho <talho@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>