- 06 Oct, 2010 10 commits
-
-
Thomas Hellstrom authored
This can be used by the X server to restrict mode resolutions and size of root pixmap. Bump minor to announce this availability. Bump driver date. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
This needs to be reviewed once we support screen objects and don't rely on VRAM for the frame-buffer. Also fix some integer overflow issues pointed out by Michel Daenzer. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
This makes sure noone accesses the fifo while it's taken down using the dirty ioctl. Also make sure all workqueues are idled before the fifo is taken down. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
This is needed for the callback to identify the caller and take appropriate locks if needed. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
Add the new-style PM hooks prepare and complete. This allows us to power up the device again after the hibernation image has been created, and display output will thus be active until the VM is finally powered off. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
Don't suspend or hibernate when there are 3D resources active since we can't restore the device's 3D state. Instead fail with an error message. In other cases, make sure we re-enable the fifo and unlock ttm on resume. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
Also add some sanity checks. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
necessary for some of the vmware fixes to be pushed in. Conflicts: drivers/gpu/drm/drm_gem.c drivers/gpu/drm/i915/intel_fb.c include/drm/drmP.h
-
Dave Airlie authored
* 'intel/drm-intel-next' of ../drm-next: (266 commits) drm/i915: Avoid circular locking from intel_fbdev_fini() drm/i915: mark display port DPMS state as 'ON' when enabling output drm/i915: Skip pread/pwrite if size to copy is 0. drm/i915: avoid struct mutex output_poll mutex lock loop on unload drm/i915: Rephrase pwrite bounds checking to avoid any potential overflow drm/i915: Sanity check pread/pwrite drm/i915: Use pipe state to tell when pipe is off drm/i915: vblank status not valid while training display port drivers/gpu/drm/i915/i915_gem.c: Add missing error handling code drm/i915: Don't mask the return code whilst relocating. drm/i915: If the GPU hangs twice within 5 seconds, declare it wedged. drm/i915: Only print 'generating error event' if we actually are drm/i915: Try to reset gen2 devices. drm/i915: Clear fence registers on GPU reset drm/i915: Force the domain to CPU on unbinding whilst wedged. drm: Move the GTT accounting to i915 drm/i915: Fix refleak during eviction. i915: Added function to initialize VBT settings drm/i915: Remove redundant deletion of obj->gpu_write_list drm/i915: Make get/put pages static ...
-
- 04 Oct, 2010 5 commits
-
-
Chris Wilson authored
lockdep spots that the fb_info->lock takes the dev->struct_mutex during init (due to the device probing) and so we can not hold dev->struct_mutex when unregistering the framebuffer. Simply reverse the order of initialisation during cleanup and so do the intel_fbdev_fini() before the intel_modeset_cleanup. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Keith Packard authored
The display port DPMS state is tracked internally in the display port driver so that when a hotplug event comes along, the driver can know whether to try retraining the link. This doesn't work well if the driver never sets the DPMS state to ON when the output is enabled. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
-
Keith Packard authored
Cancel the output polling work proc before acquiring the struct mutex to avoid acquiring the work proc mutex with the struct mutex held. This avoids inverting the lock order seen when the work proc runs. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
- 03 Oct, 2010 5 commits
-
-
Chris Wilson authored
... and do the same for pread. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-
Chris Wilson authored
Move the access control up from the fast paths, which are no longer universally taken first, up into the caller. This then duplicates some sanity checking along the slow paths, but is much simpler. Tracked as CVE-2010-2962. Reported-by: Kees Cook <kees@ubuntu.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-
Chris Wilson authored
Conflicts: drivers/gpu/drm/i915/i915_gem_evict.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_dp.c
-
Keith Packard authored
Instead of waiting for the display line value to settle, we can simply wait for the pipe configuration register 'state' bit to turn off. Contrarywise, disabling the plane will not cause the display line value to stop changing, so instead we wait for the vblank interrupt bit to get set. And, we only do this when we're not about to wait for the pipe to turn off. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Keith Packard authored
While the display port is in training mode, vblank interrupts don't occur. Because we have to wait for the display port output to turn on before starting the training sequence, enable the output in 'normal' mode so that we can tell when a vblank has occurred, then start the training sequence. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
- 02 Oct, 2010 2 commits
-
-
Julia Lawall authored
Extend the error handling code with operations found in other nearby error handling code A simplified version of the sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ @r@ statement S1,S2,S3; constant C1,C2,C3; @@ *if (...) {... S1 return -C1;} ... *if (...) {... when != S1 return -C2;} ... *if (...) {... S1 return -C3;} // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
-
Chris Wilson authored
The return from move_to_gtt_domain() may indicate a pending signal which needs to handled as opposed to an actual error, for instance, so report the original return value rather than forcing an EINVAL. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
- 01 Oct, 2010 13 commits
-
-
Chris Wilson authored
The issue is that we may become stuck executing a long running shader and continually attempt to reset the GPU. (Or maybe we tickle some bug and need to break the vicious cycle.) So if we are detect a second hang within 5 seconds, give up trying to programme the GPU and report it wedged. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
So far only found registers for i830, i845, i865 and one of those has no effect on i865! At this moment in time, attempting to reset i8xx is a little optimistic... Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
When the GPU is reset, the fence registers are invalidated, so release the objects and clear them out. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30083Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
Only drm/i915 does the bookkeeping that makes the information useful, and the information maintained is driver specific, so move it out of the core and into its single user. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
If the soon-to-be scanout buffer is partly covering the intended VRAM region, move and pin will fail. In that case, just move it out to system before attempting to move it in again. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
The removed code causes oopses with newer drms on master drop. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
This is to avoid accessing uninitialized data during drm_irq_uninstall and vblank ioctls. At the same time, enable error check from drm_kms_init which previously appeared to ignore all errors. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
We add an option not to enable fbdev, this option is off (0) by default. Not enabling fbdev at load time makes it possible to co-operate with vga16fb and vga text mode when VT switching. However, if 3D resources are active when VT switching, we're currently not able to switch over to vga, due to device limitations. This fixes a bug where we previously lost 3D state during VT switch. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
drm/vmwgfx: Fix breakage introduced by commit "drm: block userspace under allocating buffer and having drivers overwrite it (v2)" The mentioned commit breaks the vmwgfx ioctl argument sanity check. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Chris Wilson authored
In order to be fully threadsafe we need to check that the drm_gem_object refcount is still 0 after acquiring the mutex in order to call the free function. Otherwise, we may encounter scenarios like: Thread A: Thread B: drm_gem_close unreference_unlocked kref_put mutex_lock ... i915_gem_evict ... kref_get -> BUG ... i915_gem_unbind ... kref_put ... i915_gem_object_free ... mutex_unlock mutex_lock i915_gem_object_free -> BUG i915_gem_object_unbind kfree mutex_unlock Note that no driver is currently using the free_unlocked vfunc and it is scheduled for removal, hasten that process. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30454Reported-and-Tested-by: Magnus Kessler <Magnus.Kessler@gmx.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Chris Wilson authored
Now that we hold onto a reference whilst evicting objects, we need to be sure that we drop all the references taken -- even on the error paths. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
- 30 Sep, 2010 5 commits
-
-
Dave Airlie authored
There were lots of places being inconsistent since handle count looked like a kref but it really wasn't. Fix this my just making handle count an atomic on the object, and have it increase the normal object kref. Now i915/radeon/nouveau drivers can drop the normal reference on userspace object creation, and have the handle hold it. This patch fixes a memory leak or corruption on unload, because the driver had no way of knowing if a handle had been actually added for this object, and the fbcon object needed to know this to clean itself up properly. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Simon Que authored
Added a function that sets the LVDS values to default settings. This will be called by intel_init_bios before checking for the VBT (video BIOS table). The default values are thus loaded regardless of whether a VBT is found. The default settings in each parse function have been moved to the new function. This consolidates all the default settings into one place. The default dither bit value has been changed from 0 to 1. We can assume that display devices will want dithering enabled. Signed-off-by: Simon Que <sque@chromium.org> Acked-by: Olof Johansson <olof@lixom.net> [ickle: fixup for -next] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
At that point as the object is no longer in any GPU write domain it must not be on the list, so the list_del() is redundant. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Chris Wilson authored
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-