- 26 Oct, 2023 16 commits
-
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231023095428.166563-17-krzysztof.kozlowski@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20231023095428.166563-15-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231023095428.166563-12-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231023095428.166563-6-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
Krzysztof Kozlowski authored
Use snd_soc_dapm_widget_name_cmp() helper when comparing widget names, to include also the component's name prefix. Signed-off-by:
-
- 24 Oct, 2023 7 commits
-
-
Hans de Goede authored
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with a custom kernel as factory OS, does not list the used WM5102 codec inside its DSDT. So acpi_dev_get_first_match_dev() is going to fail on this board. Fallback to using "spi-$(mach->id)" as codec device name in this case to allow bytcr_wm5102 to work on these tablets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231021211534.114991-2-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with a custom kernel as factory OS, does not list the used WM5102 codec inside its DSDT. Workaround this with a new snd_soc_acpi_intel_baytrail_machines[] entry which matches on the SST id instead of the codec id like nocodec does, combined with using a machine_quirk callback which returns NULL on other machines to skip the new entry on other machines. Signed-off-by:
-
Colin Ian King authored
There are two occurrences where variable tdm_con is being initialized to zero and the next statement re-assigns tdm_con to a new value. The initializations are redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Mark Brown authored
Merge series from Maso Huang <maso.huang@mediatek.com>: Add support for sample rate checking on the MT7986.
-
Maso Huang authored
mt7986 only supports 8/12/16/24/32/48/96/192 kHz Signed-off-by:
Maso Huang <maso.huang@mediatek.com> Reviewed-by:
-
Maso Huang authored
Remove the mt7986_wm8960_priv structure. Signed-off-by:
-
Maso Huang authored
Drop the remove callback of mt7986_wm8960. Signed-off-by:
-
- 23 Oct, 2023 17 commits
-
-
Colin Ian King authored
Variable d_len_code is being initialized to zero and then re-assigned a different value in all the valid cases in the following switch statement. The only place it is not being assigned a value is on the return for a default case and in this case it does not need to be assigned. The initialization is redundant and can be removed. Signed-off-by:
-
Janusz Krzysztofik authored
The driver is now built only when MACH_AMS_DELTA is selected, which requires a very specific selection of ARCH settings. As a consequence, it gets very little attention from build-bots, if not none. Drop the driver dependency on <asm/mach-types.h>, no longer required since conversion to snd_soc_register_card() and drop of machine_is_ams_delta(). With that in place, allow the driver to be built in any environment as long as COMPILE_TEST is selected. Take care of not selecting SND_SOC_OMAP_MCBSP if COMMON_CLK is not selected. Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Link: https://lore.kernel.org/r/20231008135601.542356-1-jmkrzyszt@gmail.comSigned-off-by:
-
Mark Brown authored
Get fixes needed so we can enable build of ams-delta in more configurations.
-
Mark Brown authored
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>: This is another series to convert ASoC drivers to use struct platform_driver:remove_new(). The rockchip one was already send before but with a wrong subject prefix, the cs42l43 driver is newer than the last series. The remaining five patches are for driver combos that my coccinelle patch failed to detect before.
-
Vijendar Mukunda authored
Provide an option to load DSP data bin to ACP SRAM. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20231020062822.3913760-5-Vijendar.Mukunda@amd.comSigned-off-by:
-
Vijendar Mukunda authored
DSP data bin can be loaded in to ACP DRAM or ACP SRAM. Add conditional check for ACP DRAM usage for data bin loading. Rename DRAM base address macro to have symmetry. Signed-off-by:
-
Vijendar Mukunda authored
Increase DSP cache window range to 2.5MB to align with ACP memory. Signed-off-by:
-
Vijendar Mukunda authored
Add SOF support for ACP6.3 version based platform Signed-off-by:
-
Vijendar Mukunda authored
Add acpi machine id for ACP6.3 version based platform and configure driver data to enable SOF sound card support on newer boards. Signed-off-by:
-
Chris Morgan authored
I have a board (RK3588 based) that sets the sysclk to 12287999. The es8328 driver fails to match this to the 12288000 rate and fails to load. Allow the rate comparison to work if the frequency is within 100hz by dividing it by 100 and rounding it, then multiplying it back by 100. Note the 100hz value was chosen arbitrarily by me, but it has only been tested with a 1hz difference. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20231020171539.65513-1-macroalpha82@gmail.comSigned-off-by:
-
Weidong Wang authored
Modify the value of max_register, otherwirse the AW88261_EFRL1_REG register will not be accessible. Signed-off-by:
Weidong Wang <wangweidong.a@awinic.com> Link: https://lore.kernel.org/r/20231020083426.302925-3-wangweidong.a@awinic.comSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. uniphier_aio_remove() returned zero unconditionally. Make it return void instead and convert all users to struct platform_device::remove_new(). Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231013221945.1489203-16-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. asoc_qcom_lpass_cpu_platform_remove() returned zero unconditionally. Make it return void instead and convert all users to struct platform_device::remove_new(). Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. meson_card_remove() returned zero unconditionally. Make it return void instead and convert all users to struct platform_device::remove_new(). Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20231013221945.1489203-14-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. simple_util_remove() returned zero unconditionally. Make it return void instead and convert all users to struct platform_device::remove_new(). Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20231013221945.1489203-13-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
