Add the registers that will be used to configure the PHC in the HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for ptp interrupt. This interrupt is used when using 2-step
timestamping. For each timestamp that is added in a queue, an interrupt
is generated.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend dt-bindings for sparx5 with ptp interrupt. This is generated
when doing 2-step timestamping and the timestamp can be read from the
FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the ifh is not changed, it is fixed for each frame for each
port that is sent out. Move this on the stack because this ifh needs to
be change based on the frames that are send out. This is needed for PTP
frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arun Ramadoss says:

====================
Add support for LAN937x T1 Phy Driver

LAN937x is a Multi-port 100Base-T1 Switch and it internally uses LAN87xx
T1 Phy.  This series of patch update the initialization routine for the
LAN87xx phy and also add LAN937x part support. Added the T1 Phy
master-slave configuration through ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

To configure the T1 phy as master or slave using the ethtool -s <dev>
master-slave <forced-master/forced-slave>, the config_aneg and read
status functions are added.
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

LAN937x T1 switch is based on LAN87xx Phy, so reusing the init script of
the LAN87xx. There is a workaround in accessing the DSP bank register
for LAN937x Phy. Whenever there is a bank switch to DSP registers, then
we need a one dummy read access before proceeding to the actual register
access.
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The new initialization sequence is the improvement to the existing init
routine. Init routine does soft reset, run init script and set
Hw_init. Added the new access_smi_poll_timeout() for polling smi
bank write.
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed the empty lines in struct phy_drivers.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Used the PHY_ID_MATCH_MODEL MACRO for describing the phy_id and
phy_id_mask.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replaced the current code of resetting of LAN87xx phy to
genphy_soft_reset library function.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Divya Koppera says:

====================
Add support for 1588 in LAN8814

The following patch series contains:
- Fix for concurrent register access, which provides
  atomic access to extended page register reads/writes.
- Provides dt-bindings related to latency and timestamping
  that are required for LAN8814 phy.
- 1588 hardware timestamping support in LAN8814 phy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for 1588 in LAN8814 phy driver.
It supports 1-step and 2-step timestamping.
Co-developed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Supports configuring latency values and also adds
check for phy timestamping feature.

Signed-off-by: Divya Koppera<Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make Extended page register accessing atomic,
to overcome unexpected output from register
reads/writes.

Fixes: 7c2dcfa2 ("net: phy: micrel: Add support for LAN8804 PHY")
Signed-off-by: Divya Koppera<Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Menglong Dong says:

====================
net: dev: add skb drop reasons to net/core/dev.c

In the commit c504e5c2 ("net: skb: introduce kfree_skb_reason()"),
we added the support of reporting the reasons of skb drops to kfree_skb
tracepoint. And in this series patches, reasons for skb drops are added
to the link layer, which means that 'net/core/dev.c' is our target.

Following functions are processed:

sch_handle_egress()
__dev_xmit_skb()
enqueue_to_backlog()
do_xdp_generic()
sch_handle_ingress()
__netif_receive_skb_core()

and following new drop reasons are added (what they mean can be see in
the document of them):

SKB_DROP_REASON_QDISC_EGRESS
SKB_DROP_REASON_QDISC_DROP
SKB_DROP_REASON_CPU_BACKLOG
SKB_DROP_REASON_XDP
SKB_DROP_REASON_QDISC_INGRESS
SKB_DROP_REASON_PTYPE_ABSENT

In order to add skb drop reasons to kfree_skb_list(), the function
kfree_skb_list_reason() is introduced in the 2th patch, which will be
used in __dev_xmit_skb() in the 3th patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add reason for skb drops to __netif_receive_skb_core() when packet_type
not found to handle the skb. For this purpose, the drop reason
SKB_DROP_REASON_PTYPE_ABSENT is introduced. Take ether packets for
example, this case mainly happens when L3 protocol is not supported.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace kfree_skb() used in sch_handle_ingress() with
kfree_skb_reason(). Following drop reasons are introduced:

SKB_DROP_REASON_TC_INGRESS
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace kfree_skb() used in do_xdp_generic() with kfree_skb_reason().
The drop reason SKB_DROP_REASON_XDP is introduced for this case.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace kfree_skb() used in enqueue_to_backlog() with
kfree_skb_reason(). The skb rop reason SKB_DROP_REASON_CPU_BACKLOG is
introduced for the case of failing to enqueue the skb to the per CPU
backlog queue. The further reason can be backlog queue full or RPS
flow limition, and I think we needn't to make further distinctions.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add reasons for skb drops to __dev_xmit_skb() by replacing
kfree_skb_list() with kfree_skb_list_reason(). The drop reason of
SKB_DROP_REASON_QDISC_DROP is introduced for qdisc enqueue fails.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To report reasons of skb drops, introduce the function
kfree_skb_list_reason() and make kfree_skb_list() an inline call to
it. This function will be used in the next commit in
__dev_xmit_skb().
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace kfree_skb() used in sch_handle_egress() with kfree_skb_reason().
The drop reason SKB_DROP_REASON_TC_EGRESS is introduced. Considering
the code path of tc egerss, we make it distinct with the drop reason
of SKB_DROP_REASON_QDISC_DROP in the next commit.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sebastian Andrzej Siewior says:

====================
net: Convert user to netif_rx().

This is the first batch of converting netif_rx_ni() caller to
netif_rx(). The change making this possible is net-next and
netif_rx_ni() is a wrapper around netif_rx(). This is a clean up in
order to remove netif_rx_ni().

Cc: Andrew Lunn <andrew@lunn.ch>
Cc: bridge@lists.linux-foundation.org
Cc: Chris Zankel <chris@zankel.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Cc: linux-doc@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Steve Wahl <steve.wahl@hpe.com>
Cc: UNGLinuxDriver@microchip.com
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Robin Holt <robinmholt@gmail.com>
Cc: Steve Wahl <steve.wahl@hpe.com>
Cc: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-03-03

Jacob Keller says:

This series refactors the ice networking driver VF storage from a simple
static array to a hash table. It also introduces krefs and proper locking
and protection to prevent common use-after-free and concurrency issues.

There are two motivations for this work. First is to make the ice driver
more resilient by preventing a whole class of use-after-free bugs that can
occur around concurrent access to VF structures while removing VFs.

The second is to prepare the ice driver for future virtualization work to
support Scalable IOV, an alternative VF implementation compared to Single
Root IOV. The new VF implementation will allow for more dynamic VF creation
and removal, necessitating a more robust implementation for VF storage that
can't rely on the existing mechanisms to prevent concurrent access
violations.

The first few patches are cleanup and preparatory work needed to make the
conversion to the hash table safe. Following this preparatory work is a
patch to migrate the VF structures and variables to a new sub-structure for
code clarity. Next introduce new interface functions to abstract the VF
storage. Finally, the driver is actually converted to the hash table and
kref implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Cleanups for ocelot/felix drivers

This patch set is an assorted collection of minor cleanups brought to
the felix DSA driver and ocelot switch library.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to an apparently incorrect conflict resolution on my part in commit
54c31984 ("net: mscc: ocelot: enforce FDB isolation when
VLAN-unaware"), "ocelot->ports[port]->is_dsa_8021q_cpu = false" was
supposed to be replaced by "ocelot_port_unset_dsa_8021q_cpu(ocelot, port)"
which does the same thing, and more. But now we have both, so the direct
assignment is redundant. Remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Packet extraction failures over register-based MMIO are silent, and
difficult to pinpoint. Add an error message to remedy this.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Automated tools complain that felix_check_xtr_pkt() has logic to drain
the CPU queue on the reception of a PTP packet over Ethernet, yet it
returns an uninitialized error code in the case where the CPU queue was
empty.

This is not likely to happen (/possible if hardware works correctly),
but it isn't a fatal condition either. The PTP packet will be dequeued
from the CPU queue when the next PTP packet arrives. So initialize "err"
to 0 for the case where nothing was dequeued during this iteration.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The DSA ->port_rxtstamp() function is never called for PTP_CLASS_NONE:

dsa_skb_defer_rx_timestamp:

	if (type == PTP_CLASS_NONE)
		return false;

	if (likely(ds->ops->port_rxtstamp))
		return ds->ops->port_rxtstamp(ds, p->dp->index, skb, type);

So practically, the argument is unused, so remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This assignment is redundant, since ocelot->npi has already been set to
-1 by felix_npi_port_deinit(). Call path:

felix_change_tag_protocol
-> felix_del_tag_protocol(DSA_TAG_PROTO_OCELOT)
   -> felix_teardown_tag_npi
      -> felix_npi_port_deinit
-> felix_set_tag_protocol(DSA_TAG_PROTO_OCELOT_8021Q)
   -> felix_setup_tag_8021q
      -> felix_8021q_cpu_port_init
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>