- 08 Jun, 2021 1 commit
-
-
Tejas Upadhyay authored
Let's reserve JSL stolen memory for graphics. JasperLake is a gen11 platform which is compatible with ICL/EHL changes. This was missed in commit 24ea098b ("drm/i915/jsl: Split EHL/JSL platform info and PCI ids") V2: - Added maintainer list in cc - Added patch ref in commit message V1: - Added Cc: x86@kernel.org Fixes: 24ea098b ("drm/i915/jsl: Split EHL/JSL platform info and PCI ids") Cc: <stable@vger.kernel.org> # v5.11+ Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608053411.394166-1-tejaskumarx.surendrakumar.upadhyay@intel.com
-
- 07 Jun, 2021 6 commits
-
-
José Roberto de Souza authored
intel_dp_set_infoframes() call in intel_ddi_post_disable_dp() will take care to disable all enabled infoframes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-4-jose.souza@intel.com
-
José Roberto de Souza authored
When PSR is enabled it handles DP_SDP_VSC, changing revision and all the other fields as necessary. It can also enabled and disable this SDP as needed without a full modeset. So here masking DP_SDP_VSC bit when previous and future state PSR enabled, it will still be checked when comparing the asked state to what was programmed to hardware. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 78b772e1 ("drm/i915/display: Fill PSR state during hardware configuration read out") Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514232247.144542-2-jose.souza@intel.com
-
José Roberto de Souza authored
Commit 78b772e1 ("drm/i915/display: Fill PSR state during hardware configuration read out") is not allowing fastsets to happen when PSR states changes but PSR is a feature that can be enabled and disabled during fastsets. So here moving the PSR pipe conf checks to a block that is only executed when checking if HW state matches with requested state, not during the phase where it checks if fastset is possible or not. There still a state mismatch not allowing fastsets between states turning off or on PSR because of crtc_state->infoframes.enable BIT(DP_SDP_VSC) but at least for now it will allow a fastset between PSR1 <-> PSR2, that is a case heavilly used by CI due to pipe CRC not work with PSR2, but the remaning issue will be fixed in a future patch. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reported-by:
-
Wan Jiabing authored
Fix the following coccicheck warning: ./drivers/gpu/drm/i915/display/intel_display_power.c:3081:1-28: duplicated argument to & or | This commit fixes duplicate argument. It might be a typo. But what I can do is to remove it now. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Lucas De Marchi authored
For some reason coccinelle misses a few cases in header files with calls to INTEL_GEN()/IS_GEN(). Do a manual conversion for those. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-6-lucas.demarchi@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-3-lucas.demarchi@intel.com
-
Lucas De Marchi authored
This was done by the following semantic patch: @@ expression i915; @@ - INTEL_GEN(i915) + GRAPHICS_VER(i915) @@ expression i915; expression E; @@ - INTEL_GEN(i915) >= E + GRAPHICS_VER(i915) >= E @@ expression dev_priv; expression E; @@ - !IS_GEN(dev_priv, E) + GRAPHICS_VER(dev_priv) != E @@ expression dev_priv; expression E; @@ - IS_GEN(dev_priv, E) + GRAPHICS_VER(dev_priv) == E @@ expression dev_priv; expression from, until; @@ - IS_GEN_RANGE(dev_priv, from, until) + IS_GRAPHICS_VER(dev_priv, from, until) @def@ expression E; identifier id =~ "^gen$"; @@ - id = GRAPHICS_VER(E) + ver = GRAPHICS_VER(E) @@ identifier def.id; @@ - id + ver It also takes care of renaming the variable we assign to GRAPHICS_VER() so to use "ver" rather than "gen". Signed-off-by:
-
- 04 Jun, 2021 3 commits
-
-
Lucas De Marchi authored
Since we are replacing IS_GEN() with GRAPHICS_VER(), make sure we take care of the comments as well. Signed-off-by:
-
Lucas De Marchi authored
This was done by the following semantic patch: @@ expression i915; @@ - INTEL_GEN(i915) + GRAPHICS_VER(i915) @@ expression i915; expression E; @@ - INTEL_GEN(i915) >= E + GRAPHICS_VER(i915) >= E @@ expression dev_priv; expression E; @@ - !IS_GEN(dev_priv, E) + GRAPHICS_VER(dev_priv) != E @@ expression dev_priv; expression E; @@ - IS_GEN(dev_priv, E) + GRAPHICS_VER(dev_priv) == E @@ expression dev_priv; expression from, until; @@ - IS_GEN_RANGE(dev_priv, from, until) + IS_GRAPHICS_VER(dev_priv, from, until) @def@ expression E; identifier id =~ "^gen$"; @@ - id = GRAPHICS_VER(E) + ver = GRAPHICS_VER(E) @@ identifier def.id; @@ - id + ver It also takes care of renaming the variable we assign to GRAPHICS_VER() so to use "ver" rather than "gen". Cc: intel-gvt-dev@lists.freedesktop.org Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Manasi Navare authored
Static analysis identified an issue in skl_crtc_allocate_ddb where mbus_offset may be used uninitialized. This patch fixes it. Fixes: 835c176c ("drm/i915: Introduce MBUS relative dbuf offsets") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210603215338.13804-1-manasi.d.navare@intel.com
-
- 03 Jun, 2021 6 commits
-
-
Imre Deak authored
On ADL_P the power well->PHY mapping doesn't follow the mapping on previous platforms, fix this up. While at it remove the redundant dev_priv param from icl_tc_phy_aux_ch(). Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-3-imre.deak@intel.com
-
Imre Deak authored
It's possible that an already dequeued put_async_work() will release the reference (*) that was put asynchronously after the dequeue happened. This leaves an async-put work pending, without any reference to release. A subsequent async-put may trigger the drm_WARN_ON(!queue_delayed_work(&power_domains->async_put_work)); warn due to async_put_work() still pending. To avoid the warn, cancel the pending async_put_work() when releasing the reference at (*) above. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3421 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2289Signed-off-by:
-
Imre Deak authored
An async-put on an encoder specific power domain (for instance the AUX PW domain) may be pending when removing the encoder. Make sure any such async-puts are complete while the corresponding encoder is still in place since at least AUX power wells require this to do a power well->PHY lookup. Signed-off-by:
-
Anusha Srivatsa authored
Move struct intel_dmc from i915_drv.h to intel_dmc.h. v2: Add includes along with moving the struct. Reviewed-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
We check for dmc_payload being there at various points in the driver. Replace it with the helper. v2: rebased. v3: Move intel_dmc to intel_dmc.h in another patch (Lucas) v4: Remove headers not needed from intel_dmc.h Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Use new format of debug messages across intel_csr. While at it, change some function definitions which now need dev_priv for drm_err and drm_info etc. v2: use container_of() (Jani) v3: Indentation fixes. (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Suggested-by:
-
- 27 May, 2021 4 commits
-
-
Ville Syrjälä authored
Implement Wa_22012358565 to avoid underrun with 32bpp cursor in some high bandwidth scenarios. The implementation calls for overriding the arbitration slots for the planes. v2: Fix adlp_plane_ctl_arb_slots() return type Signed-off-by:
-
Ville Syrjälä authored
The FIFO underrun recovery mechanism has a boatload of cases where it can't be used. The description is also a bit ambiguous as it doesn't specify whether plane downscaling needs to be considered or just pipe downscaling. We may not even have sufficient state tracking to decide this on demand, so for now just disable the whole thing. Signed-off-by:
-
Imre Deak authored
On ADL_P the TBT AUX power wells depend on the PW#2 power well, add the corresponding power domain dependencies. Signed-off-by:
-
Chris Wilson authored
The kernel prefers enabling fbc over the initial fb, since this leads to actual runtime power savings, so if the initial fb is deemed too big using some heuristic, then we simply skip allocating stolen for it. However if the kernel is not configured with fbcon then it should be possible to relax this, since unlike with fbcon the display server shouldn't preserve it when later replacing it, and so we should be able to re-use the stolen memory for fbc and friends. This patch is reported to fix some flicker seen during boot splash on some devices. v2: s/FRAMEBUFFER_CONSOLE/CONFIG_FRAMEBUFFER_CONSOLE Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
- 26 May, 2021 12 commits
-
-
Ville Syrjälä authored
intel_hdmi_bpc_possible() will check has_hdmi_sink for us, so no need to check it in intel_hdmi_mode_clock_valid() anymore. Cc: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by:
-
Ville Syrjälä authored
Now that we have to tell intel_hdmi_mode_clock_valid() whether we're asking about 4:4:4 or 4:2:0 output it can take care of the dotclock->TMDS clock conversion. Cc: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by:
-
Ville Syrjälä authored
Currently HDMI .mode_valid() only checks whether the source can do deep color. Let's check whether the sink can do it as well. Cc: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by:
-
Ville Syrjälä authored
Let's put the platform checks into intel_hdmi_bpc_possible() so that it'll confirm both the source and sink capabilities. Cc: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by:
-
Ville Syrjälä authored
We wish intel_hdmi_bpc_possible() to consider whether the sink supports HDMI or just DVI when checking whether it'll support HDMI deep color or not. This also takes care of the "force DVI" property. Cc: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by:
-
Ville Syrjälä authored
Extract intel_hdmi_bpc_possible() from intel_hdmi_deep_color_possible() so that we can reuse it for mode validation. Cc: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by:
-
Gwan-gyeong Mun authored
It removes intel_crtc_state from function argument of intel_psr_enable_source() in order to use intel_psr_enable_source() without intel_crtc_state on other psr internal functions. And we can get cpu_trancoder from intel_psr, therefore we don't need to pass intel_crtc_state to this function. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Manasi Navare authored
On XE_LPD, VRR CTL register adds a new VRR Guardband bitfield replacing the pipeline full and deprecating the pipeline override bit. This patch adds this corresponding bitfield in the register defs, crtc state vrr structure and populates this in vrr compute config and vrr enable functions. It also adds the corresponding HW state readout for this field. Bspec: 50508 Cc: Aditya Swarup <aditya.swarup@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Aditya Swarup <aditya.swarup@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-3-matthew.d.roper@intel.com
-
Matt Roper authored
XE_LPD brings enhanced underrun recovery: the hardware can somewhat mitigate underruns by using an interpolated replacement pixel (soft underrun) or the previous pixel (hard underrun). Furthermore, underruns can now be caused downstream by the port, even if the pipe itself is operating properly. The interrupt register and PIPE_STATUS register give us extra bits to recognize hard/soft underruns and determine whether the underrun was caused by the port, so we'll use that information to print some more descriptive errors when underruns occur. v2: - Keep ICL's PIPE_STATUS defined separately from the old GMCH pipe status register. (Ville) - Only read/clear the PIPE_STATUS register on platforms with display ver >= 11. (Lucas) v3: - Actually enable+unmask all the new underrun interrupts, clear stale bits out from PIPE_STATUS before enabling the interrupts, report all FIFO underruns errors at once, rename a bunch of stuff to unconfuse vs. PIPESTAT. (Ville) Bspec: 50335 Bspec: 50366 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-2-matthew.d.roper@intel.com
-
Rodrigo Vivi authored
Getting in sync with -rc2 Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Jani Nikula authored
On ADL-P, it's possible to enable the stream splitter on pipe B in addition to pipe A. Bspec: 50174 Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Shaokun Zhang authored
Function 'intel_dbuf_init' is declared twice, remove the repeated declaration. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
-
- 25 May, 2021 8 commits
-
-
José Roberto de Souza authored
We are missing the implementation of some workarounds to enabled PSR2 in Alderlake P, so to avoid any CI report of issues around PSR2 disabling it until all PSR2 workarounds are implemented. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-5-jose.souza@intel.com
-
José Roberto de Souza authored
DC3CO is allowed in all the combinations between pipe and port A and B on alderlake-P. BSpec: 49196 Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Commit c457d9cf ("drm/i915: Make sure we have enough memory bandwidth on ICL") assumes that we always have a non-zero dram_info->channels and uses it as a divisor. We need num memory channels to be at least 1 for sane bw limits checking, even when PCode returns 0 or there is a error reading it, so lets force it to 1 in this case. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
José Roberto de Souza authored
On ADL-P TC cold is exited and blocked when legacy aux is powered, that is exacly the same of what ICL need for static TC ports. TODO: When a TBT hub or monitor is connected it will cause TBT and legacy aux to be powered at the same time, hopefully this will not cause any issues but if it do, some rework will be needed. v2: - skip icl_tc_port_assert_ref_held() warn on, adl-p uses aux to block TC cold v3: - Drop icl_tc_port_assert_ref_held() earlier return for adl_p, not needed anymore - Set timeout_expected when enabling aux power well as port could be disconnected when tc_cold_block() is called BSpec: 55480 Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
José Roberto de Souza authored
MODULAR_FIA_MASK is set in adl_p so we can drop this ealier return and read registers. Also to avoid warnings from icl_tc_port_assert_ref_held() when calling tc_cold_block() in this functions it is necessary to held the lock. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Imre Deak authored
Similarly to GGTT VMAs, DPT VMAs can be also a remapped or rotated view of the mapped object, so make sure we debug print the details for these views as well besides the normal view. While at it also fix the debug print for the VMA type of DPT VMAs. Signed-off-by:
-
Imre Deak authored
An object mapped via DPT can have remapped and rotated VMA instances besides the normal VMA instance, similarly to GGTT VMA instances. Adjust the corresponding VMA lookup asserts. While at it also check if a DPT VM is passed incorrectly to i915_vm_to_ppgtt(). Signed-off-by:
-
Imre Deak authored
All DPT FB color plane surface base addresses must be 2MB aligned. On ADL_P this means that the offsets in CCS FB object must be also 2MB aligned. Adjusting unaligned offsets for these FBs during commit time (compensating with the x/y offsets) doesn't work, since the big alignment would most probably lead to an x/y offset mismatch error between the main and CCS planes. We can overcome this limitation by remapping CCS FBs, so that each color plane is at an aligned offset, leaving x/y for each plane unadjusted during commit and so not causing an x/y mismatch error. However remapping for CCS FBs will be done as a follow-up, so for now require that user space allocates the FB obj with properly aligned planes. v2: s/SZ_2M/512*4k/ for clarity. (Ville) Signed-off-by:
-
