- 14 Oct, 2008 15 commits
-
-
Joel Becker authored
Now that synchronous readers are using ocfs2_read_blocks_sync(), all callers of ocfs2_read_blocks() are passing an inode. Use it unconditionally. Since it's there, we don't need to pass the ocfs2_super either. Signed-off-by:
Joel Becker <joel.becker@oracle.com> Signed-off-by:
Mark Fasheh <mfasheh@suse.com>
-
Joel Becker authored
The ocfs2_read_blocks() function currently handles sync reads, cached, reads, and sometimes cached reads. We're going to add some functionality to it, so first we should simplify it. The uncached, synchronous reads are much easer to handle as a separate function, so we instroduce ocfs2_read_blocks_sync(). Signed-off-by:
-
Tao Ma authored
According to Christoph Hellwig's advice, we really don't need a ->list to handle one xattr's list. Just a map from index to xattr prefix is enough. And I also refactor the old list method with the reference from fs/xfs/linux-2.6/xfs_xattr.c and the xattr list method in btrfs. Signed-off-by:
Tao Ma <tao.ma@oracle.com> Signed-off-by:
-
Tao Ma authored
According to Christoph Hellwig's advice, the hash value of EA is only calculated by its suffix. Signed-off-by:
-
Mark Fasheh authored
Per Christoph Hellwig's suggestion - don't split these up. It's not like we gained much by having the two tiny files around. Signed-off-by: -
Mark Fasheh authored
This is too big to be inlined. Signed-off-by: -
Mark Fasheh authored
This is pointless as brelse() already does the check. Signed-off-by: Mark Fasheh
-
Mark Fasheh authored
i and b_len don't really need to be u64's. Xattr extent lengths should be limited by the VFS, and then the size of our on-disk length field. Signed-off-by: -
Mark Fasheh authored
Signed-off-by: -
Mark Fasheh authored
It can also be moved into ocfs2_la_debug_read(). Signed-off-by: -
Mark Fasheh authored
ocfs2_stack_supports_plocks() doesn't need this to properly return a zero or one value. Signed-off-by: -
Tao Ma authored
As Mark mentioned, it may be time-consuming when we remove the empty xattr bucket, so this patch try to let empty bucket exist in xattr operation. The modification includes: 1. Remove the functin of bucket and extent record deletion during xattr delete. 2. In xattr set: 1) Don't clean the last entry so that if the bucket is empty, the hash value of the bucket is the hash value of the entry which is deleted last. 2) During insert, if we meet with an empty bucket, just use the 1st entry. 3. In binary search of xattr bucket, use the bucket hash value(which stored in the 1st xattr entry) to find the right place. Signed-off-by: -
Tao Ma authored
During the process of xatt insertion, we use binary search to find the right place and "low" is set to it. But when there is one xattr which has the same name hash as the inserted one, low is the wrong value. So set it to the right position. Signed-off-by:
-
Sunil Mushran authored
Patch adds check for [no]user_xattr in ocfs2_show_options() that completes the list of all mount options. Signed-off-by:
Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by:
-
Joel Becker authored
ocfs2 wants JBD2 for many reasons, not the least of which is that JBD is limiting our maximum filesystem size. It's a pretty trivial change. Most functions are just renamed. The only functional change is moving to Jan's inode-based ordered data mode. It's better, too. Because JBD2 reads and writes JBD journals, this is compatible with any existing filesystem. It can even interact with JBD-based ocfs2 as long as the journal is formated for JBD. We provide a compatibility option so that paranoid people can still use JBD for the time being. This will go away shortly. [ Moved call of ocfs2_begin_ordered_truncate() from ocfs2_delete_inode() to ocfs2_truncate_for_delete(). --Mark ] Signed-off-by:
-
- 13 Oct, 2008 25 commits
-
-
Joel Becker authored
Now that ocfs2 limits inode numbers to 32bits, add a mount option to disable the limit. This parallels XFS. 64bit systems can handle the larger inode numbers. [ Added description of inode64 mount option in ocfs2.txt. --Mark ] Signed-off-by:
-
Joel Becker authored
ocfs2 inode numbers are block numbers. For any filesystem with less than 2^32 blocks, this is not a problem. However, when ocfs2 starts using JDB2, it will be able to support filesystems with more than 2^32 blocks. This would result in inode numbers higher than 2^32. The problem is that stat(2) can't handle those numbers on 32bit machines. The simple solution is to have ocfs2 allocate all inodes below that boundary. The suballoc code is changed to honor an optional block limit. Only the inode suballocator sets that limit - all other allocations stay unlimited. The biggest trick is to grow the inode suballocator beneath that limit. There's no point in allocating block groups that are above the limit, then rejecting their elements later on. We want to prevent the inode allocator from ever having block groups above the limit. This involves a little gyration with the local alloc code. If the local alloc window is above the limit, it signals the caller to try the global bitmap but does not disable the local alloc file (which can be used for other allocations). [ Minor cleanup - removed an ML_NOTICE comment. --Mark ] Signed-off-by:
-
Tao Ma authored
In ocfs2_xattr_free_block, we take a cluster lock on xb_alloc_inode while we have a transaction open. This will deadlock the downconvert thread, so fix it. We can clean up how xattr blocks are removed while here - this patch also moves the mechanism of releasing xattr block (including both value, xattr tree and xattr block) into this function. Signed-off-by:
-
Tao Ma authored
In ocfs2_extend_trans, when we can't extend the current transaction, it will commit current transaction and restart a new one. So if the previous credits we have allocated aren't used(the block isn't dirtied before our extend), we will not have enough credits for any future operation(it will cause jbd complain and bug out). So check this and re-extend it. Signed-off-by:
-
Joel Becker authored
The original get/put_extent_tree() functions held a reference on et_root_bh. However, every single caller already has a safe reference, making the get/put cycle irrelevant. We change ocfs2_get_*_extent_tree() to ocfs2_init_*_extent_tree(). It no longer gets a reference on et_root_bh. ocfs2_put_extent_tree() is removed. Callers now have a simpler init+use pattern. Signed-off-by:
-
Joel Becker authored
struct ocfs2_extent_tree_operations provides methods for the different on-disk btrees in ocfs2. Describing what those methods do is probably a good idea. Signed-off-by:
-
Joel Becker authored
We now have three different kinds of extent trees in ocfs2: inode data (dinode), extended attributes (xattr_tree), and extended attribute values (xattr_value). There is a nice abstraction for them, ocfs2_extent_tree, but it is hidden in alloc.c. All the calling functions have to pick amongst a varied API and pass in type bits and often extraneous pointers. A better way is to make ocfs2_extent_tree a first-class object. Everyone converts their object to an ocfs2_extent_tree() via the ocfs2_get_*_extent_tree() calls, then uses the ocfs2_extent_tree for all tree calls to alloc.c. This simplifies a lot of callers, making for readability. It also provides an easy way to add additional extent tree types, as they only need to be defined in alloc.c with a ocfs2_get_<new>_extent_tree() function. Signed-off-by:
-
Joel Becker authored
A couple places check an extent_tree for a valid inode. We move that out to add an eo_insert_check() operation. It can be called from ocfs2_insert_extent() and elsewhere. We also have the wrapper calls ocfs2_et_insert_check() and ocfs2_et_sanity_check() ignore NULL ops. That way we don't have to provide useless operations for xattr types. Signed-off-by:
-
Joel Becker authored
A caller knows what kind of extent tree they have. There's no reason they have to call ocfs2_get_extent_tree() with a NULL when they could just as easily call a specific function to their type of extent tree. Introduce ocfs2_dinode_get_extent_tree(), ocfs2_xattr_tree_get_extent_tree(), and ocfs2_xattr_value_get_extent_tree(). They only take the necessary arguments, calling into the underlying __ocfs2_get_extent_tree() to do the real work. __ocfs2_get_extent_tree() is the old ocfs2_get_extent_tree(), but without needing any switch-by-type logic. ocfs2_get_extent_tree() is now a wrapper around the specific calls. It exists because a couple alloc.c functions can take et_type. This will go later. Another benefit is that ocfs2_xattr_value_get_extent_tree() can take a struct ocfs2_xattr_value_root* instead of void*. This gives us typechecking where we didn't have it before. Signed-off-by:
-
Joel Becker authored
Provide an optional extent_tree_operation to specify the max_leaf_clusters of an ocfs2_extent_tree. If not provided, the value is 0 (unlimited). Signed-off-by:
-
Joel Becker authored
ocfs2_num_free_extents() re-implements the logic of ocfs2_get_extent_tree(). Now that ocfs2_get_extent_tree() does not allocate, let's use it in ocfs2_num_free_extents() to simplify the code. The inode validation code in ocfs2_num_free_extents() is not needed. All callers are passing in pre-validated inodes. Signed-off-by:
-
Joel Becker authored
The root_el of an ocfs2_extent_tree needs to be calculated from et->et_object. Make it an operation on et->et_ops. Signed-off-by:
-
Joel Becker authored
The 'private' pointer was a way to store off xattr values, which don't live at a set place in the bh. But the concept of "the object containing the extent tree" is much more generic. For an inode it's the struct ocfs2_dinode, for an xattr value its the value. Let's save off the 'object' at all times. If NULL is passed to ocfs2_get_extent_tree(), 'object' is set to bh->b_data; Signed-off-by:
-
Joel Becker authored
Rather than allocating a struct ocfs2_extent_tree, just put it on the stack. Fill it with ocfs2_get_extent_tree() and drop it with ocfs2_put_extent_tree(). Now the callers don't have to ENOMEM, yet still safely ref the root_bh. Signed-off-by:
-
Joel Becker authored
The members of the ocfs2_extent_tree structure gain a prefix of 'et_'. All users are updated. Signed-off-by:
-
Joel Becker authored
The ocfs2_extent_tree_operations structure gains a field prefix on its members. The ->eo_sanity_check() operation gains a wrapper function for completeness. All of the extent tree operation wrappers gain a consistent name (ocfs2_et_*()). Signed-off-by:
-
Mark Fasheh authored
This patch fixes the following build warnings: fs/ocfs2/xattr.c: In function 'ocfs2_half_xattr_bucket': fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 7 has type 'long int' fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 8 has type 'long int' fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 7 has type 'long int' fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 8 has type 'long int' fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 7 has type 'long int' fs/ocfs2/xattr.c:3282: warning: format '%d' expects type 'int', but argument 8 has type 'long int' fs/ocfs2/xattr.c: In function 'ocfs2_xattr_set_entry_in_bucket': fs/ocfs2/xattr.c:4092: warning: format '%d' expects type 'int', but argument 6 has type 'size_t' fs/ocfs2/xattr.c:4092: warning: format '%d' expects type 'int', but argument 6 has type 'size_t' fs/ocfs2/xattr.c:4092: warning: format '%d' expects type 'int', but argument 6 has type 'size_t' Signed-off-by: -
Tiger Yang authored
This patch adds the s_incompat flag for extended attribute support. This helps us ensure that older versions of Ocfs2 or ocfs2-tools will not be able to mount a volume with xattr support. Signed-off-by:
Tiger Yang <tiger.yang@oracle.com> Signed-off-by:
-
Tao Ma authored
In inode removal, we need to iterate all the buckets, remove any externally-stored EA values and delete the xattr buckets. Signed-off-by:
-
Tao Ma authored
Where the previous patches added the ability of list/get xattr in buckets for ocfs2, this patch enables ocfs2 to store large numbers of EAs. The original design doc is written by Mark Fasheh, and it can be found in http://oss.oracle.com/osswiki/OCFS2/DesignDocs/IndexedEATrees. I only had to make small modifications to it. First, because the bucket size is 4K, a new field named xh_free_start is added in ocfs2_xattr_header to indicate the next valid name/value offset in a bucket. It is used when we store new EA name/value. With this field, we can find the place more quickly and what's more, we don't need to sort the name/value every time to let the last entry indicate the next unused space. This makes the insert operation more efficient for blocksizes smaller than 4k. Because of the new xh_free_start, another field named as xh_name_value_len is also added in ocfs2_xattr_header. It records the total length of all the name/values in the bucket. We need this so that we can check it and defragment the bucket if there is not enough contiguous free space. An xattr insertion looks like this: 1. xattr_index_block_find: find the right bucket by the name_hash, say bucketA. 2. check whether there is enough space in bucketA. If yes, insert it directly and modify xh_free_start and xh_name_value_len accordingly. If not, check xh_name_value_len to see whether we can store this by defragment the bucket. If yes, defragment it and go on insertion. 3. If defragement doesn't work, check whether there is new empty bucket in the clusters within this extent record. If yes, init the new bucket and move all the buckets after bucketA one by one to the next bucket. Move half of the entries in bucketA to the next bucket and go on insertion. 4. If there is no new bucket, grow the extent tree. As for xattr deletion, we will delete an xattr bucket when all it's xattrs are removed and move all the buckets after it to the previous one. When all the xattr buckets in an extend record are freed, free this extend records from ocfs2_xattr_tree. Signed-off-by:
-
Tao Ma authored
In xattr bucket, we want to limit the maximum size of a btree leaf, otherwise we'll lose the benefits of hashing because we'll have to search large leaves. So add a new field in ocfs2_extent_tree which indicates the maximum leaf cluster size we want so that we can prevent ocfs2_insert_extent() from merging the leaf record even if it is contiguous with an adjacent record. Other btree types are not affected by this change. Signed-off-by:
-
Tao Ma authored
Add code to lookup a given extended attribute in the xattr btree. Lookup follows this general scheme: 1. Use ocfs2_xattr_get_rec to find the xattr extent record 2. Find the xattr bucket within the extent which may contain this xattr 3. Iterate the bucket to find the xattr. In ocfs2_xattr_block_get(), we need to recalcuate the block offset and name offset for the right position of name/value. Signed-off-by:
-
Tao Ma authored
Ocfs2 breaks up xattr index tree leaves into 4k regions, called buckets. Attributes are stored within a given bucket, depending on hash value. After a discussion with Mark, we decided that the per-bucket index (xe_entry[]) would only exist in the 1st block of a bucket. Likewise, name/value pairs will not straddle more than one block. This allows the majority of operations to work directly on the buffer heads in a leaf block. This patch adds code to iterate the buckets in an EA. A new abstration of ocfs2_xattr_bucket is added. It records the bhs in this bucket and ocfs2_xattr_header. This keeps the code neat, improving readibility. Signed-off-by:
-
Tao Ma authored
When necessary, an ocfs2_xattr_block will embed an ocfs2_extent_list to store large numbers of EAs. This patch adds a new type in ocfs2_extent_tree_type and adds the implementation so that we can re-use the b-tree code to handle the storage of many EAs. Signed-off-by:
-
Tiger Yang authored
This patch implements storing extended attributes both in inode or a single external block. We only store EA's in-inode when blocksize > 512 or that inode block has free space for it. When an EA's value is larger than 80 bytes, we will store the value via b-tree outside inode or block. Signed-off-by:
-
