- 25 Feb, 2024 29 commits
-
-
Zhang Rui authored
Saving package temp_data and core temp_data in one array with different offsets is fragile. Split them and clean up crabbed maths and macros. This also fixes a problem that pdata->core_data[0] was never used. Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20240202092144.71180-10-rui.zhang@intel.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Zhang Rui authored
coretemp driver has an obscure and fragile logic for handling package and core temperature data. Place the logic in newly introduced helpers for further optimizations. No functional change. Signed-off-by:
-
Zhang Rui authored
pdata->cpu_map[] saves the mapping between cpu core id and the index in pdata->core_data[]. This is used to find the temp_data structure using cpu_core_id, by traversing the pdata->cpu_map[] array. But the same goal can be achieved by traversing the pdata->core_temp[] array directly. Remove redundant pdata->cpu_map[]. No functional change. Signed-off-by:
-
Zhang Rui authored
Replace sensor_device_attribute with device_attribute because sensor_device_attribute->index is no longer used. No functional change. Signed-off-by:
-
Zhang Rui authored
When sensor_device_attribute pointer is available, use container_of() to get the temp_data address. This removes the unnecessary dependency of cached index in pdata->core_data[]. No functional change. Signed-off-by:
-
Zhang Rui authored
Introduce enum coretemp_attr_index to better describe the index of each sensor attribute. No functional change. Signed-off-by:
-
Aleksa Savic authored
This driver exposes hardware sensors of the ASUS ROG RYUJIN II 360 all-in-one CPU liquid cooler, which communicates through a proprietary USB HID protocol. Report offsets were initially discovered in [1] by Florian Freudiger. Available sensors are pump, internal and external (controller) fan speed in RPM, their duties in PWM, as well as coolant temperature. Attaching external fans to the controller is optional and allows them to be controlled from the device. If not connected, the fan-related sensors will report zeroes. The controller is a separate hardware unit that comes bundled with the AIO and connects to it to allow fan control. The addressable LCD screen is not supported in this driver and should be controlled through userspace tools. [1]: https://github.com/liquidctl/liquidctl/pull/653Tested-by:
Florian Freudiger <florian.freudiger@proton.me> Signed-off-by:
Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20240108094453.22986-1-savicaleksa83@gmail.com [groeck: Add HID dependency] Signed-off-by:
-
Aleksa Savic authored
This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature and pump speed (in RPM), as well as PWM control (natively only through a temp-PWM curve, but the driver also emulates fixed PWM control on top of that). The Z-series models additionally expose the speed and duty of an optionally connected fan, with the same PWM control capabilities. Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is for the manual control mode and 2 is for the liquid temp to PWM curve mode. Writing a 0 disables control of the channel through the driver after setting its duty to 100%. As it is not possible to query the device for the active mode, the driver keeps track of it. The temperature of the curves relates to the fixed [20-59] C range, per device limitations, and correlating to the detected liquid temperature. Only PWM values (ranging from 0-255) can be set. The addressable RGB LEDs and LCD screen, included only on Z-series models, are not supported in this driver. Co-developed-by:
Jonas Malaco <jonas@protocubo.io> Signed-off-by:
Yury Zhuravlev <stalkerg@gmail.com> Signed-off-by:
-
Cosmo Chou authored
Add dt-bindings for pt5161l temperature monitoring. Signed-off-by:
Cosmo Chou <chou.cosmo@gmail.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240115100518.2887549-3-chou.cosmo@gmail.comSigned-off-by:
-
Cosmo Chou authored
Add vendor prefix for Astera Labs, Inc. https://www.asteralabs.comSigned-off-by:
-
Javier Carrasco authored
The Amphenol ChipCap 2 is a capacitive polymer humidity and temperature sensor with an integrated EEPROM and minimum/maximum humidity alarms. All device variants offer an I2C interface and depending on the part number, two different output modes: - CC2D: digital output - CC2A: analog (PDM) output This driver adds support for the digital variant (CC2D part numbers), which includes the following part numbers: - non-sleep measurement mode (CC2D23, CC2D25, CC2D33, CC2D35) - sleep measurement mode (CC2D23S, CC2D25S, CC2D33S, CC2D35S) The Chipcap 2 EEPROM can be accessed to configure a series of parameters like the minimum/maximum humidity alarm threshold and hysteresis. The EEPROM is only accessible in the command window after a power-on reset. The default window lasts 10 ms if no Start_CM command is sent. After the command window is finished (either after the mentioned timeout of after a Start_NOM command is sent), the device enters the normal operation mode and makes a first measurement automatically. Unfortunately, the device does not provide any hardware or software reset and therefore the driver must trigger power cycles to enter the command mode. A dedicated, external regulator is required for that. This driver keeps the device off until a measurement or access to the EEPROM is required, making use of the first automatic measurement to avoid different code paths for sleep and non-sleep devices. The minimum and maximum humidity alarms are configured with two registers per alarm: one stores the alarm threshold and the other one keeps the value that turns off the alarm. The alarm signals are only updated when a measurement is carried out. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-5-260bea05cf9b@gmail.comSigned-off-by:
-
Javier Carrasco authored
Add device tree bindings and an example for the ChipCap 2 humidity and temperature sensor. Reviewed-by:
-
Javier Carrasco authored
This attributes have been recently introduced and require the corresponding ABI documentation. Signed-off-by:
-
Javier Carrasco authored
Add min_alarm and max_alarm attributes for humidityX to support devices that can generate these alarms. Such attributes already exist for other magnitudes such as tempX. Tested with a ChipCap 2 temperature-humidity sensor. Signed-off-by:
-
Javier Carrasco authored
Add vendor prefix for Amphenol (https://www.amphenol-sensors.com) Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
Bo Liu <liubo03@inspur.com> Link: https://lore.kernel.org/r/20240202072235.41614-1-liubo03@inspur.comSigned-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
-
Bo Liu authored
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by:
-
Stefan Gloor authored
The temperature/humidity sensors of the STS3x/SHT3x family are calibrated and factory-programmed with a unique serial number. For some sensors, this serial number can be used to obtain a calibration certificate via an API provided by the manufacturer (Sensirion). Expose the serial number via debugfs. Tested with: 2x STS31, 1x STS32, 1x SHT31 Signed-off-by:
Stefan Gloor <code@stefan-gloor.ch> Link: https://lore.kernel.org/r/20240131111512.25321-2-code@stefan-gloor.chSigned-off-by:
-
Charles Hsu authored
Add support for mpq8785 device from Monolithic Power Systems, Inc. (MPS) vendor. This is synchronous step-down controller. Signed-off-by:
Charles Hsu <ythsu0511@gmail.com> Link: https://lore.kernel.org/r/20240131074822.2962078-2-ythsu0511@gmail.com [groeck: probe_new --> probe; add MODULE_IMPORT_NS(PMBUS)] Signed-off-by:
-
Charles Hsu authored
Monolithic Power Systems, Inc. (MPS) synchronous step-down converter. Signed-off-by:
-
Ivor Wanders authored
Adds a driver that provides read only access to the fan speed for Microsoft Surface Pro devices. The fan speed is always regulated by the EC and cannot be influenced directly. Signed-off-by:
Ivor Wanders <ivor@iwanders.net> Link: https://github.com/linux-surface/kernel/pull/144Reviewed-by:
Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by:
Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20240131005856.10180-2-ivor@iwanders.net [groeck: - Declare surface_fan_hwmon_is_visible() static - Add dependency on SURFACE_AGGREGATOR_BUS ] Signed-off-by:
-
Nuno Sa authored
The LTC4282 hot swap controller allows a board to be safely inserted and removed from a live backplane. Using one or more external N-channel pass transistors, board supply voltage and inrush current are ramped up at an adjustable rate. An I2C interface and onboard ADC allows for monitoring of board current, voltage, power, energy and fault status. Signed-off-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240129-b4-ltc4282-support-v4-3-fe75798164cc@analog.com [groeck: clamp value range in ltc4282_write_voltage_byte_cached()] Signed-off-by:
-
- 11 Feb, 2024 11 commits
-
-
Nuno Sa authored
Sometimes a voltage channel might have an hard failure (eg: a shorted MOSFET). Hence, add a fault attribute to report such failures. Signed-off-by:
-
Nuno Sa authored
Add bindings for the LTC4282 High Current Hot Swap Controller with I2C Compatible Monitoring. Reviewed-by:
-
Patrick Rudolph authored
Use _pmbus_write_word_data to allow intercepting writes to PMBUS_SMBALERT_MASK in the custom chip specific code. This is required for MP2971/MP2973 which doesn't follow the PMBUS specification for PMBUS_SMBALERT_MASK. Signed-off-by:
Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by:
Naresh Solanki <naresh.solanki@9elements.com> Link: https://lore.kernel.org/r/20240130152903.3651341-1-naresh.solanki@9elements.comSigned-off-by:
-
Heiner Kallweit authored
Class-based I2C probing requires detect() and address_list both to be set in the I2C client driver, see checks in i2c_detect(). It's misleading to declare I2C_CLASS_HWMON support if the driver doesn't implement detect(). Class-based probing is a legacy mechanism, in addition apparently nobody ever noticed that class-based probing has been non-functional in both drivers from the very beginning. So drop the fragments of class-based probing support. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/13ce7c11-a958-4892-ada9-faf5bfdcb89d@gmail.comSigned-off-by:
-
Guenter Roeck authored
Drop maintainer entries for MAX31760 and MAX31827 since the e-mail addresses of their maintainers is no longer reachable and there is no known alternative means to contact them. HWMON drivers have a subsystem maintainer, so individual maintainer entries are not mandatory. Reported-by:
-
Heiner Kallweit authored
Class-based I2C probing requires detect() and address_list to be set in the I2C client driver, see checks in i2c_detect(). It's misleading to declare I2C_CLASS_HWMON support if this precondition isn't met. Signed-off-by:
-
Michal Simek authored
Describe ina260 chip which is precision digital current and power monitor with precision integrated shunt resistor. Signed-off-by:
Michal Simek <michal.simek@amd.com> Acked-by:
-
Michal Simek authored
There are two drivers in the Linux kernel. One is hwmon based and second IIO. IIO version requires to define #io-channel-cells to operate. Signed-off-by:
-
Michal Simek authored
Add a label property to allow a custom name to be used for identifying a device on the board. This is useful when multiple devices are present on the same board. Similar change was done by commit ffae65fb ("dt-bindings: spi: spi-cadence: Add label property"). Signed-off-by:
-
Forest Crossman authored
This value was found on an MSI PRO X670-P WIFI with an NCT6687D chip. Signed-off-by:
Forest Crossman <cyrozap@gmail.com> Link: https://lore.kernel.org/r/CAO3ALPwot01+bBisj7Roog7SD9UwV+y4NtiakKrBDE0tPvFhbw@mail.gmail.comSigned-off-by:
-
Jani Nikula authored
HWMON_CHANNEL_INFO() is supposed to be used as initializer for arrays of const struct hwmon_channel_info *. However, without explicit const, HWMON_CHANNEL_INFO() creates mutable compound literals, and the const pointers point at the mutable data. Add const to place the data in rodata. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/20240117114405.1506775-1-jani.nikula@intel.comSigned-off-by:
-
