RDMA read operation is not supported inline data. If user cofigures
issue a RDMA read and use inline data, it will happen a hardware
error.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

During init hem table, type should be used instead of
table->type which is finally initializaed with type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When skb is sent, it will pass the following functions in soft roce.

rxe_send [rdma_rxe]
    ip_local_out
        __ip_local_out
        ip_output
            ip_finish_output
                ip_finish_output2
                    dev_queue_xmit
                        __dev_queue_xmit
                            dev_hard_start_xmit

In the above functions, if error occurs in the above functions or
iptables rules drop skb after ip_local_out, kfree_skb will be called.
So it is not necessary to call kfree_skb in soft roce module again.
Or else crash will occur.

The steps to reproduce:

     server                       client
    ---------                    ---------
    |1.1.1.1|<----rxe-channel--->|1.1.1.2|
    ---------                    ---------

On server: rping -s -a 1.1.1.1 -v -C 10000 -S 512
On client: rping -c -a 1.1.1.1 -v -C 10000 -S 512

The kernel configs CONFIG_DEBUG_KMEMLEAK and
CONFIG_DEBUG_OBJECTS are enabled on both server and client.

When rping runs, run the following command in server:

iptables -I OUTPUT -p udp  --dport 4791 -j DROP

Without this patch, crash will occur.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

w/o RXE_START_MASK, the last_psn of IB_OPCODE_RC_SEND_ONLY_INV
will not be updated in update_wqe_psn, and the corresponding
wqe will not be acked in rxe_completer due to its last_psn is
zero. Finally, the other wqe will also not be able to be acked,
because the wqe of IB_OPCODE_RC_SEND_ONLY_INV with last_psn 0
is still there. This causes large amount of io timeout when
nvmeof is over rxe.

Add RXE_START_MASK for IB_OPCODE_RC_SEND_ONLY_INV to fix this.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

In the cases where iwpm_hash_bucket is NULL and where function
get_mapinfo_hash_bucket returns NULL then the map_info is never added
to hash_bucket_head and hence there is a leak of map_info. Fix this
by nullifying hash_bucket_head and if that is null we know that
that map_info was not added to hash_bucket_head and hence map_info
should be free'd.

Detected by CoverityScan, CID#1222481 ("Resource Leak")

Fixes: 30dc5e63 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

There are few issues with validation of netdevice and listen id lookup
for IB (IPoIB) while processing incoming CM request as below.

1. While performing lookup of bind_list in cma_ps_find(), net namespace
of the netdevice can get deleted in cma_exit_net(), resulting in use
after free access of idr and/or net namespace structures.
This lookup occurs from the workqueue context (and not userspace
context where net namespace is always valid).

           CPU0                              CPU1
           ====                              ====

 bind_list = cma_ps_find();
                                     move netdevice to new namespace
                                     delete net namespace
                                        cma_exit_net()
                                           idr_destroy(idr);

 [..]
 cma_find_listener(bind_list, ..);

2. While netdevice is validated for IP address in given net namespace,
netdevice's net namespace and/or ifindex can change in
cma_get_net_dev() and cma_match_net_dev().

Above issues are overcome by using rcu lock along with netdevice
UP/DOWN state as described below.
When a net namespace is getting deleted, netdevice is closed and
shutdown before moving it back to init_net namespace.
change_net_namespace() synchronizes with any existing use of netdevice
before changing the netdev properties such as net or ifindex.
Once netdevice IFF_UP flags is cleared, such fields are not guaranteed
to be valid.
Therefore, rcu lock along with netdevice state check ensures that,
while route lookup and cm_id lookup is in progress, netdevice of
interest won't migrate to any other net namespace.
This ensures that associated net namespace of netdevice won't get
deleted while rcu lock is held for netdevice which is in IFF_UP state.

Fixes: fa20105e ("IB/cma: Add support for network namespaces")
Fixes: 4be74b42 ("IB/cma: Separate port allocation to network namespaces")
Fixes: f887f2ac ("IB/cma: Validate routing of incoming requests")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Previously, if a method contained mandatory attributes in a namespace
that wasn't given by the user, these attributes weren't validated.
Fixing this by iterating over all specification namespaces.

Fixes: fac9658c ("IB/core: Add new ioctl interface")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The c4iw_rdev_close() logic was not releasing all the hw
resources (PBL and RQT memory) during the device removal
event (driver unload / system reboot). This can cause panic
in gen_pool_destroy().

The module remove function will wait for all the hw
resources to be released during the device removal event.

Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref)
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

Allow INFINIBAND without INFINIBAND_ADDR_TRANS because fuzzing has been
finding fair number of CM bugs.  So provide option to disable it.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

INFINIBAND_SRP code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency.  This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

CIFS_SMB_DIRECT code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency.  This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

INFINIBAND_SRPT code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency.  This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

NVME_TARGET_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency.  This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

NVME_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols.  So
declare the kconfig dependency.  This is necessary to allow for enabling
INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Starting from commit 72f36be0 ("net/mlx5: Fix mlx5_get_uars_page to
return error code") the mlx5_get_uars_page() call returns error in case
of failure, but it was mistakenly overlooked in the merge commit.

Fixes: e7996a9a ("Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git")
Reported-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

In commit bcf87f1d ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
incorrectly mapped primary device's netdevice to 2nd port netdevice.
It always represented primary port's netdevice for 2nd port netdevice
when ib representors were not used.

This results into failing to process CM request arriving on 2nd port due
to incorrect mapping of netdevice.

This fix corrects it by considering the right mdev.

Cc: <stable@vger.kernel.org> # 4.16
Fixes: bcf87f1d ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.

Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.

Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Ensure that user didn't supply values too large that can cause overflow.

UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23
shift exponent -2147483648 is negative
CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call
Trace:
dump_stack+0xde/0x164
ubsan_epilogue+0xe/0x81
set_rq_size+0x7c2/0xa90
create_qp_common+0xc18/0x43c0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x2260
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
do_syscall_64+0x1aa/0x740
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x433569
RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569
RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003
RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006

Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Failure in rereg MR releases UMEM but leaves the MR to be destroyed
by the user. As a result the following scenario may happen:
"create MR -> rereg MR with failure -> call to rereg MR again" and
hit "NULL-ptr deref or user memory access" errors.

Ensure that rereg MR is only performed on a non-dead MR.

Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 4.5
Fixes: 395a8e4c ("IB/mlx5: Refactoring register MR code")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Before [1], When MAC address of the netdevice is changed, default GID is
supposed to get deleted and added back which affects the node and/or port
GUID in below sequence.

netdevice_event()
-> NETDEV_CHANGEADDR
   default_del_cmd()
      del_netdev_default_ips()
          bond_delete_netdev_default_gids()
              ib_cache_gid_set_default_gid()
                  ib_cache_gid_del()
   add_cmd()
   [..]

However, ib_cache_gid_del() was not getting invoked in non bonding
scenarios because event_ndev and rdma_ndev are same.
Therefore, fix such condition to ignore checking upper device when event
ndev and rdma_dev are same; similar to bond_set_netdev_default_gids().

Which this fix ib_cache_gid_del() is invoked correctly; however
ib_cache_gid_del() doesn't find the default GID for deletion because
find_gid() was given default_gid = false with
GID_ATTR_FIND_MASK_DEFAULT set.
But it was getting overwritten by ib_cache_gid_set_default_gid() later
on as part of add_cmd().
Therefore, mac address change used to work for default GID.

With refactor series [1], this incorrect behavior is detected.

Therefore,
when deleting default GID, set default_gid and set MASK flag.
when deleting IP based GID, clear default_gid and set MASK flag.

[1] https://patchwork.kernel.org/patch/10319151/

Fixes: 238fdf48 ("IB/core: Add RoCE table bonding support")
Fixes: 598ff6ba ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When IPv6 link local address is removed, if it matches with the default
GID, default GID(s)s gets removed which may not be a desired behavior.
This behavior is introduced by refactor work in Fixes tag.

When IPv6 link address is removed, removing its equivalent RoCEv2 GID
which exactly matches with default RoCEv2 GID, is right thing to do.
However achieving it correctly requires lot more changes, likely in
roce_gid_mgmt.c and core/cache.c. This should be done as independent
patch.

Therefore, this patch preserves behavior of not deleteing default GIDs.
This is done by providing explicit hint to consider default GID property
using mask and default_gid; similar to add_gid().

Fixes: 598ff6ba ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Default GIDs are marked reserved at the start of the GID table at index
0 and 1 by gid_table_reserve_default().  Currently when default GID is
requested, it can still allocates an empty slot which was not marked as
RESERVED for default GID, which is incorrect.

At least in current code flow of roce_gid_mgmt.c, in theory we can
still request to allocate more than one/two default GIDs depending
on how upper devices are setup.

Therefore, it is better for cache layer to only allow our reserved slots
to be used by default GID allocation requests.

Fixes: 598ff6ba ("IB/core: Refactor GID modify code for RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Based on discussion with Kate Stewart this license is not a
BSD-2-Clause, but is now formally identified as Linux-OpenIB
by SPDX.

The key difference between the licenses is in the 'warranty'
paragraph.

if_infiniband.h refers to the 'OpenIB.org' license, but
does not include the text, instead it links to an obsolete
web site that contains a license that matches the BSD-2-Clause
SPX. There is no 'three clause' version of the OpenIB.org
license.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The RDMA CM will select a source device and address by consulting
the routing table if no source address is passed into
rdma_resolve_address().  Userspace will ask for this by passing an
all-zero source address in the RESOLVE_IP command.  Unfortunately
the new check for non-zero address size rejects this with EINVAL,
which breaks valid userspace applications.

Fix this by explicitly allowing a zero address family for the source.

Fixes: 2975d5de ("RDMA/ucma: Check AF family prior resolving address")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This is done by auditing all callers of ucma_get_ctx and switching the
ones that unconditionally touch ->device to ucma_get_ctx_dev. This covers
a little less than  half of the call sites.

The 11 remaining call sites to ucma_get_ctx() were manually audited.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

With gcc-4.1.2:

    drivers/infiniband/core/uverbs_std_types_flow_action.c:366: error: unknown field ‘ptr’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:367: error: unknown field ‘type’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: missing braces around initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:367: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>.<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘min_len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: error: unknown field ‘len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:368: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:369: error: unknown field ‘flags’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:369: warning: (near initialization for ‘uverbs_flow_action_esp_keymat[0].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:376: error: unknown field ‘ptr’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:377: error: unknown field ‘type’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: missing braces around initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:377: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>.<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:379: error: unknown field ‘len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:379: warning: (near initialization for ‘uverbs_flow_action_esp_replay[0].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:383: error: unknown field ‘ptr’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:384: error: unknown field ‘type’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘min_len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: error: unknown field ‘len’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:385: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)
    drivers/infiniband/core/uverbs_std_types_flow_action.c:386: error: unknown field ‘flags’ specified in initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: excess elements in union initializer
    drivers/infiniband/core/uverbs_std_types_flow_action.c:386: warning: (near initialization for ‘uverbs_flow_action_esp_replay[1].<anonymous>’)

Add the missing braces to fix this.

Fixes: 2eb9beae ("IB/uverbs: Add flow_action create and destroy verbs")
Fixes: 7d12f8d5 ("IB/uverbs: Add modify ESP flow_action")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y.
The build error occurs when the mlx5 driver code attempts to use
USER_ACCESS interfaces, which are built as a loadable module.

Fixes these build errors:

drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects'
../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree'
drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root':
../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree'

Build-tested with multiple config combinations.

Fixes: 8c84660b ("IB/mlx5: Initialize the parsing tree root without the help of uverbs")
Cc: stable@vger.kernel.org # reported against 4.16
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The header file fs_helpers.h is included twice. So it should be removed.

Fixes: 802c2125 ("IB/mlx5: Add IPsec support for egress and ingress")
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Validating input parameters should be done before getting the cm_id
otherwise it can leak a cm_id reference.

Fixes: 6a21dfc0 ("RDMA/ucma: Limit possible option size")
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Pull more btrfs updates from David Sterba:
 "We have queued a few more fixes (error handling, log replay,
  softlockup) and the rest is SPDX updates that touche almost all files
  so the diffstat is long"

* tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Only check first key for committed tree blocks
  btrfs: add SPDX header to Kconfig
  btrfs: replace GPL boilerplate by SPDX -- sources
  btrfs: replace GPL boilerplate by SPDX -- headers
  Btrfs: fix loss of prealloc extents past i_size after fsync log replay
  Btrfs: clean up resources during umount after trans is aborted
  btrfs: Fix possible softlock on single core machines
  Btrfs: bail out on error during replay_dir_deletes
  Btrfs: fix NULL pointer dereference in log_dir_items

Pull cifs fixes from Steve French:
 "SMB3 fixes, a few for stable, and some important cleanup work from
  Ronnie of the smb3 transport code"

* tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: change validate_buf to validate_iov
  cifs: remove rfc1002 hardcoded constants from cifs_discard_remaining_data()
  cifs: Change SMB2_open to return an iov for the error parameter
  cifs: add resp_buf_size to the mid_q_entry structure
  smb3.11: replace a 4 with server->vals->header_preamble_size
  cifs: replace a 4 with server->vals->header_preamble_size
  cifs: add pdu_size to the TCP_Server_Info structure
  SMB311: Improve checking of negotiate security contexts
  SMB3: Fix length checking of SMB3.11 negotiate request
  CIFS: add ONCE flag for cifs_dbg type
  cifs: Use ULL suffix for 64-bit constant
  SMB3: Log at least once if tree connect fails during reconnect
  cifs: smb2pdu: Fix potential NULL pointer dereference

Pull SCSI fixes from James Bottomley:
 "This is a set of minor (and safe changes) that didn't make the initial
  pull request plus some bug fixes.

  The status handling code is actually a running regression from the
  previous merge window which had an incomplete fix (now reverted) and
  most of the remaining bug fixes are for problems older than the
  current merge window"

[ Side note: this merge also takes the base kernel git repository to 6+
  million objects for the first time. Technically we hit it a couple of
  merges ago already if you count all the tag objects, but now it
  reaches 6M+ objects reachable from HEAD.

  I was joking around that that's when I should switch to 5.0, because
  3.0 happened at the 2M mark, and 4.0 happened at 4M objects. But
  probably not, even if numerology is about as good a reason as any.

                                                              - Linus ]

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklist
  scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler()
  scsi: dpt_i2o: Use after free in I2ORESETCMD ioctl
  scsi: core: Make scsi_result_to_blk_status() recognize CONDITION MET
  scsi: core: Rename __scsi_error_from_host_byte() into scsi_result_to_blk_status()
  Revert "scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()"
  scsi: aacraid: Insure command thread is not recursively stopped
  scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION
  scsi: qla2xxx: correctly shift host byte
  scsi: qla2xxx: Fix race condition between iocb timeout and initialisation
  scsi: qla2xxx: Avoid double completion of abort command
  scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure
  scsi: scsi_dh: Don't look for NULL devices handlers by name
  scsi: core: remove redundant assignment to shost->use_blk_mq

Pull more Kbuild updates from Masahiro Yamada:

 - pass HOSTLDFLAGS when compiling single .c host programs

 - build genksyms lexer and parser files instead of using shipped
   versions

 - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency

 - let the top .gitignore globally ignore artifacts generated by flex,
   bison, and asn1_compiler

 - let the top Makefile globally clean artifacts generated by flex,
   bison, and asn1_compiler

 - use safer .SECONDARY marker instead of .PRECIOUS to prevent
   intermediate files from being removed

 - support -fmacro-prefix-map option to make __FILE__ a relative path

 - fix # escaping to prepare for the future GNU Make release

 - clean up deb-pkg by using debian tools instead of handrolled
   source/changes generation

 - improve rpm-pkg portability by supporting kernel-install as a
   fallback of new-kernel-pkg

 - extend Kconfig listnewconfig target to provide more information

* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: extend output of 'listnewconfig'
  kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
  Kbuild: fix # escaping in .cmd files for future Make
  kbuild: deb-pkg: split generating packaging and build
  kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
  kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
  kbuild: rename *-asn1.[ch] to *.asn1.[ch]
  kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
  .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
  kbuild: add %.dtb.S and %.dtb to 'targets' automatically
  kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
  genksyms: generate lexer and parser during build instead of shipping
  kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
  .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
  kbuild: use HOSTLDFLAGS for single .c executables

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes and updates for x86:

   - Address a swiotlb regression which was caused by the recent DMA
     rework and made driver fail because dma_direct_supported() returned
     false

   - Fix a signedness bug in the APIC ID validation which caused invalid
     APIC IDs to be detected as valid thereby bloating the CPU possible
     space.

   - Fix inconsisten config dependcy/select magic for the MFD_CS5535
     driver.

   - Fix a corruption of the physical address space bits when encryption
     has reduced the address space and late cpuinfo updates overwrite
     the reduced bit information with the original value.

   - Dominiks syscall rework which consolidates the architecture
     specific syscall functions so all syscalls can be wrapped with the
     same macros. This allows to switch x86/64 to struct pt_regs based
     syscalls. Extend the clearing of user space controlled registers in
     the entry patch to the lower registers"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Fix signedness bug in APIC ID validity checks
  x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
  x86/olpc: Fix inconsistent MFD_CS5535 configuration
  swiotlb: Use dma_direct_supported() for swiotlb_ops
  syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
  syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
  syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
  syscalls/core, syscalls/x86: Clean up syscall stub naming convention
  syscalls/x86: Extend register clearing on syscall entry to lower registers
  syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
  syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
  syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
  syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
  syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
  x86/syscalls: Don't pointlessly reload the system call number
  x86/mm: Fix documentation of module mapping range with 4-level paging
  x86/cpuid: Switch to 'static const' specifier

Pull x86 pti updates from Thomas Gleixner:
 "Another series of PTI related changes:

   - Remove the manual stack switch for user entries from the idtentry
     code. This debloats entry by 5k+ bytes of text.

   - Use the proper types for the asm/bootparam.h defines to prevent
     user space compile errors.

   - Use PAGE_GLOBAL for !PCID systems to gain back performance

   - Prevent setting of huge PUD/PMD entries when the entries are not
     leaf entries otherwise the entries to which the PUD/PMD points to
     and are populated get lost"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pgtable: Don't set huge PUD/PMD on non-leaf entries
  x86/pti: Leave kernel text global for !PCID
  x86/pti: Never implicitly clear _PAGE_GLOBAL for kernel image
  x86/pti: Enable global pages for shared areas
  x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init
  x86/mm: Comment _PAGE_GLOBAL mystery
  x86/mm: Remove extra filtering in pageattr code
  x86/mm: Do not auto-massage page protections
  x86/espfix: Document use of _PAGE_GLOBAL
  x86/mm: Introduce "default" kernel PTE mask
  x86/mm: Undo double _PAGE_PSE clearing
  x86/mm: Factor out pageattr _PAGE_GLOBAL setting
  x86/entry/64: Drop idtentry's manual stack switch for user entries
  x86/uapi: Fix asm/bootparam.h userspace compilation errors

Pull scheduler fixes from Thomas Gleixner:
 "A few scheduler fixes:

   - Prevent a bogus warning vs. runqueue clock update flags in
     do_sched_rt_period_timer()

   - Simplify the helper functions which handle requests for skipping
     the runqueue clock updat.

   - Do not unlock the tunables mutex in the error path of the cpu
     frequency scheduler utils. Its not held.

   - Enforce proper alignement for 'struct util_est' in sched_avg to
     prevent a misalignment fault on IA64"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Force proper alignment of 'struct util_est'
  sched/core: Simplify helpers for rq clock update skip requests
  sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
  sched/cpufreq/schedutil: Fix error path mutex unlock

Pull more perf updates from Thomas Gleixner:
 "A rather large set of perf updates:

  Kernel:

   - Fix various initialization issues

   - Prevent creating [ku]probes for not CAP_SYS_ADMIN users

  Tooling:

   - Show only failing syscalls with 'perf trace --failure' (Arnaldo
     Carvalho de Melo)

            e.g: See what 'openat' syscalls are failing:

        # perf trace --failure -e openat
         762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory
         <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? >
         790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory
        ^C#

   - Show information about the event (freq, nr_samples, total
     period/nr_events) in the annotate --tui and --stdio2 'perf
     annotate' output, similar to the first line in the 'perf report
     --tui', but just for the samples for a the annotated symbol
     (Arnaldo Carvalho de Melo)

   - Introduce 'perf version --build-options' to show what features were
     linked, aliased as well as a shorter 'perf -vv' (Jin Yao)

   - Add a "dso_size" sort order (Kim Phillips)

   - Remove redundant ')' in the tracepoint output in 'perf trace'
     (Changbin Du)

   - Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo
     Carvalho de Melo)

   - Show group details on the title line in the annotate browser and
     'perf annotate --stdio2' output, so that the per-event columns can
     have headers (Arnaldo Carvalho de Melo)

   - Fixup vertical line separating metrics from instructions and
     cleaning unused lines at the bottom, both in the annotate TUI
     browser (Arnaldo Carvalho de Melo)

   - Remove duplicated 'samples' in lost samples warning in
     'perf report' (Arnaldo Carvalho de Melo)

   - Synchronize i915_drm.h, silencing the perf build process,
     automagically adding support for the new DRM_I915_QUERY ioctl
     (Arnaldo Carvalho de Melo)

   - Make auxtrace_queues__add_buffer() allocate struct buffer, from a
     patchkit already applied (Adrian Hunter)

   - Fix the --stdio2/TUI annotate output to include group details, be
     it for a recorded '{a,b,f}' explicit event group or when forcing
     group display using 'perf report --group' for a set of events not
     recorded as a group (Arnaldo Carvalho de Melo)

   - Fix display artifacts in the ui browser (base class for the
     annotate and main report/top TUI browser) related to the extra
     title lines work (Arnaldo Carvalho de Melo)

   - perf auxtrace refactorings, leftovers from a previously partially
     processed patchset (Adrian Hunter)

   - Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de
     Melo)

   - Synchronize i915_drm.h, silencing a perf build warning and in the
     process automagically adding support for a new ioctl command
     (Arnaldo Carvalho de Melo)

   - Fix a strncpy issue in uprobe tracing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open()
  tracing/uprobe_event: Fix strncpy corner case
  perf/core: Fix perf_uprobe_init()
  perf/core: Fix perf_kprobe_init()
  perf/core: Fix use-after-free in uprobe_perf_close()
  perf tests clang: Fix function name for clang IR test
  perf clang: Add support for recent clang versions
  perf tools: Fix perf builds with clang support
  perf tools: No need to include namespaces.h in util.h
  perf hists browser: Remove leftover from row returned from refresh
  perf hists browser: Show extra_title_lines in the 'D' debug hotkey
  perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering
  tools headers uapi: Synchronize i915_drm.h
  perf report: Remove duplicated 'samples' in lost samples warning
  perf ui browser: Fixup cleaning unused lines at the bottom
  perf annotate browser: Fixup vertical line separating metrics from instructions
  perf annotate: Show group details on the title line
  perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer
  perf/x86/intel: Move regs->flags EXACT bit init
  perf trace: Remove redundant ')'
  ...